Message class for message id
Hi,
Can you please tell me how to create message text for existing message class
Thanks
Ali
Hi,
Goto SE91
Enter Message Class name.
Select Attributes Radiobutton
Click Change button
One popup window will come for original or logon language.
click on your choice.
change the text and save.
And for Changing or adding new messages in it Select messages tab.
do the above process again
Is this is your requirement
Similar Messages
-
Hello,
How do I set up a message class for Validation? When I am selecting Proj Defn and clicking on Validation, I see the message id field greyed out.The message id is auto populated as /SAPDMC/LSMW_AUX_030 and I am unable to change it.
Also when I go to WBS level this message class in not populated.However in drop down I dont see the option of "Z" messgae class which I have defined with customised message.
Please let me know your thoughts on how we change message class and why "Z" message class is not seen n dropdown?
Thanks
ShivHi,
When you click on Validation, System will pop up a window which will say Configure Message ID. In that window Click on Create Icon. It will goto SE91. Enter the Name of message class(Ex: ZPROJECT) and click on create. It will goto "Message maintenance: Change Message class" screen. There Click on SAVE button. System will ask you a Package, ask your abaper, he will tell u the package.
By using this message class you can create the Validation.
Hopw this must be help you.
Regards
Prabu -
Dear Experts,
We are on SAP 4.6C. I am trying to create a validation on WBS elements
for a project. Using transaction GGB0. I would like to issue an error
message from a different custom message class. However, I cannot
change the message class for the WBS element validation. The "Message
ID" field on the Create/Change Validation screen is greyed out and the
Extras -> Change Message Class is also greyed out.
Any suggestions would be greatly appreciated.
Regards,
Venkat.Can't help you with this one, I can just confirm the behaviour. However, this question is far from BPM and Workflow. Perhaps you should ask the same question in one of the ABAP Development forums (and add a pointer to it from here and close this question).
It's not easy to tell which forum is most appropriate. Perhaps the "Enhancements and Modifications" forum could be said to be appropriate, as the validations and substitutions can be said to be a sort of enhancement technique. I am sure someone there will disagree, but that's the only candidate I see besides "ABAP, General". -
How do I create Wrapper class for Message Box?
I want to create Wrapper class for Message Box class in my project. I am using Telerik Testing FrameWork. In that message box was not recognized in unit testing thats y i want to create wrapper class, for creating the
instance for that mesage box.A wrapper class is simply a class that for example wraps another object or a subset of its methods. You could just create a class that exposes the same methods as the MessageBox and uses the MessageBox internally.
If you define an interface and program against this in your application, you could replace your wrapper object with another object that implements the same interface when you are doing the unit tests. Something like this:
public interface IMessageBoxWrapper
System.Windows.Forms.DialogResult Show(string text, string caption);
public class MessageBoxWrapper
public System.Windows.Forms.DialogResult Show(string text, string caption)
return System.Windows.Forms.MessageBox.Show(text, caption);
public class MockMessageBoxWrapper
public System.Windows.Forms.DialogResult Show(string text, string caption)
return System.Windows.Forms.DialogResult.OK;
private readonly IMessageBoxWrapper _mbw;
public Form1(IMessageBoxWrapper mbw)
InitializeComponent();
_mbw = mbw;
private void SomeMethod()
_mbw.Show("...", "...");
Hope that helps.
Please remember to close your threads by marking all helpful posts as answer and please start a new thread if you have a new question. -
Development class for message class
can you tell me the development class for sap message classes?
is there any table where the message classes are stored.
ThanksIf you are asking the table where messages are stored , it is T100.
Development class for message class is project specific. You need to check that. -
How to know the message class and message number
When the web client show warnning message,
How can i to find the message class and message number?
Thnaks
KevinHi,
You can goto tcode SAAB and activate the log for Checkpoint group BSP_WD_EXCEPTION_DISPLAY. whenever you log into Web UI you can see the details of the message.
To troubleshoot teh message goto SE91 and enter the message class and message number. Select the message and then click on whereused. You will see all programs where this message is used.
Hope this helps.
Regards,
Chandrakant -
Write message to Job log with message class and message number
hi folk,
When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
Please advice how to write a message with the message class and message number.
Best regards
LinhNgHi Linh,
How did you provide the text "Some message"? Did you hard code it or used a text element?
Regards,
Immanuel. -
Message class for a given transaction
Hi Experts,
How to find the message class and number for a given program, t-code or package?
Thanks in advance!!!
Moderator message: please do more research before asking, show what you have done when posting.
Edited by: Thomas Zloch on Feb 24, 2012Go SWo1, do F4 help on the Object type field. Click "Infomation System". In the "Short Description" field, enter Sales and clic green check. Of course you will see the buiness object for Sales Order in the list. This is just one way of trying to find business objects.
Regards,
Rich Heilman -
Validation message class for project system
Hi,
I go to OPSI and going to maintain validation for my project normally thru CJ20n and CJ03... what message class should i choose for new implementation.
Cheers,
NiesHi,
Which one is most suitable for PS new implementation.? coz when i go to OPSI ...its asking for message class.
but not sure which one is the suitable one?
Plz help.
Cheers,
Nies -
Message Classes for Leave Request
Hi,
I've checked every message class I can think of but can't find the warning message:
"Absence cannot be partial-day, so clock times have been removed."
which is displayed in Leave Request.
Does anyone know which class it is in so I can stop it being displayed?
Is it within the WebDynpro?
RobYou mentioned about configuring messages in Leave Request. How do you change the text of a standard SAP message? I would like to change the text of the message 015 Payroll Area &1 locked that is displayed in the portal, without using BADI.
As I read through the blogs this seemed to be the closest message to my particular question.
Thanks. -
Error Message Classes for Leave Request
Hi,
I've checked every error message class I can think of but can't find the warning message:
"Absence cannot be partial-day, so clock times have been removed."
which is displayed in Leave Request.
Does anyone know which class it is in so I can stop it being displayed?
Rob
Edited by: Rob Adams on Dec 18, 2008 12:18 PMYou mentioned about configuring messages in Leave Request. How do you change the text of a standard SAP message? I would like to change the text of the message 015 Payroll Area &1 locked that is displayed in the portal, without using BADI.
As I read through the blogs this seemed to be the closest message to my particular question.
Thanks. -
Hi experts,
I am trying to solve an issue regarding error messages in RFx. I need to find out which class(es) is(are) related to RFx (Obj. Type BUS2200). I was already able to identify BBP_PD, but this doesn't contain all messages.
Can anyone help me with this?
Thanks in advance!
Regards,
JoãHi,
There is message class BBP_BID.
If you know the message number, you can search it from T100 table.
if you know the error document, you can find it in the BBP_PD transaction. Select the Check Again link.
Regards,
Masa -
Message control for message type ,V 1499
Hi Folks,
SAP standard message V1 499 is flashed in case when i am creating the return sales order for an item which had already return in place.
Following message is displayed 'There are already returns for item 000010: 348 IT'.
Above messge is at item level..for each of the item which had return system will flash message.
My clients requirement is that this message should flash at header level..
For example:-
Now i have invoice which had return order as per following:-
:- return order XXX for item no .10
:- return order XXX for item no. 20
:- eturn order YYY for item no. 30
Now when i refer same invoice for return order creation scenario once again.. system will flash above message 3 times.. As per my requirement it should be displayed for 2 times only..One message for item 10 and 20 and other one for item 30..
Is it possible to make this changes through standard configuration..Kindly let me know.
Regards,
AbhijeetHi,
As per i know we can not modify the V1 messages, but we can modify V4 messages. For your requirement you have to do some technical enhancement.
For controlling V4 messages you can have a check at OVAH t-code.
Thanks,
Raja -
How can I change the MESSAGE STYLE for messages?
My customer complains about the big "X", as well as he thinks it's an error instead of a just message or note.
so my question is how do i change the message style then?You only get that when you have two or more consecutive messages. Try to avoid that is one option.
You can change the icon if you want. Create another icon, call it stop.ico and put it in the icons directory (as indicated by UI_ICON). However, if you have a STOP alert, the icon changes for that alert too.
Note: this is for Developer 6i. In 9i you cannot use ico files. Use gif files instead and put the image in the image jar file (found in OH/forms90/java directory). Since you see a big X, I believe you are using 6i. -
Setting Message Class via Content-Type for Faxes
Hello,
I am trying to set the message class for inbound email messages (with a fax attachment) from the internet. The class that I am trying to set is IPM.Note.Microsoft.Fax.CA. Exchange 2013 SP1 is being used.
I have a transport rule set up which evaluates criteria on the incoming message, and then sets the Content-Class header to fax-ca. Unfortunately, even though the content-class header is being set (I can see this is the headers when the message gets
to Outlook), the message class is not changing and the message still has the IPM.Note class.
On the other hand, if the transport rule is modified to set the Content-Class to voice-ca, the message class changes to IPM.Note.Microsoft.Voicemail.UM.CA.
So it seems that it works for voice-ca, but not fax-ca. Is there an Exchange setting that I have missed? Is there a reason why this wouldn't work for fax?
Thanks.Hello,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Maybe you are looking for
-
Flash game problem: Game wont start until user clicks stage
Hi Everyone, I'm a student at Drexel University and I just completed a basic platformer for a actionscript class. My professor docked me some points for the game not working until the user actually clicks within the swf. I've heard that this problem
-
Use of device configurations - update version of mobile component
Hello, We changed coded some changes in standard XMAM30. The name of this mobile component is XMAM30_LAPTOP_SR3 (type is application) with version 3.0003. This was added to a device configuration DC_MAM and assigned to a hierarchy. The users synced a
-
On my website using freestyle temp, the top title is aligned bottom. With this setting the only link that works is "Welcome". They work fine within iWeb. any ideas? http://oglalalakotanation.com/OLN/Google_Map.html
-
10.7 ERP Question on Planned Shipment Date and Planned Delivery Date
Hi All, I have a 10.7 ERP question related to Planned shipment date and Planned Delivery Date which are on shipment::released event. Are these held and displayed at the shipset / shipment level on ERP database and forms or are they held & displayed a
-
Is there another way to convert the .orf files that are not being recognized ? I used a card reader. The Olympus Viewer software reads the raw images just fine. Thanks