'Message error' in Invoice

Hi Guys,
I have got a different kind of error at the time of tacking Invoice. It says "Message Error". Before that I never faced this kind of errorr. What could be the possible reasons for that?
Kindly help me out.
Thanks to u in advance

Where do you see this error? SXMB_MONI? Trace details would be appreciated..
VJ

Similar Messages

Error message control for invoice w/o PO in SRM

Hi,
Anyone know how to setup error message if invoice value limit is above e.g. 10000 USD? Invoice will be entered without PO.
There will be no PO but invoice will be created and user should get error message if total invoiced value is above 10000 USD.
We are in SRM_SERVER5.5 with SP 06.
If anyone came across during IMS setup, please help me on it.
Thanks in advance.
Regards,
Rahul Mandale

Hi Atul,
Thanks for your useful answer. I am getting error message while creation of invoice. But problem is that it is throwing message for all invocie, need to consider if condition of 'GROSS_AMOUNT >= 1000 USD. During creation of invoice, it should throw msg 001 (YIMS) which I have configured as my exception in IMS when fulfills the condition.
I am sending code for 'CHANGE' and "CHECK' BADI.
Can you check and suggest the correction? Where I need to put this conditon for pop up of error while gross_amount >= 1000 while creation and change of invoice??
Thanks in advance.
regards,
Rahul
<b>method IF_EX_BBP_DOC_CHANGE_BADI~BBP_IV_CHANGE.</b>
DATA:   ls_header               TYPE bbp_pds_inv_header_d,
          lt_messages             TYPE TABLE OF bbp_smessages_badi,
          ls_message              TYPE bbp_smessages_badi,
          lf_dummy                TYPE c,
          lf_gross_amount         TYPE BBP_IV_AMOUNT,
          i_guid                  TYPE BBP_GUID .
get data of the invoice from guid
CALL FUNCTION 'BBP_PD_INV_GETDETAIL'
    EXPORTING
      i_guid   = i_guid
    IMPORTING
      e_header = ls_header.
IF ls_header-GROSS_AMOUNT >= 1000.
CLEAR ls_message.
    ls_message-msgty       = 'E'.
    ls_message-msgid         = 'YIMS'.
    ls_message-msgno     = '001'.
APPEND ls_message to lt_messages.
    EXIT.
ENDIF.
<b>method IF_EX_BBP_DOC_CHECK_BADI~BBP_DOC_CHECK.</b>
Data        ls_message TYPE bbp_smessages_badi.
*To create custom message
    clear ls_message.
    ls_message-msgty = 'E'.
    ls_message-msgid = 'YIMS'.
    ls_message-msgno = '001'.
    append ls_message to et_messages.
endmethod.

R11:RECEIVED ERROR MESSAGES FOR AP INVOICE APPROVAL IN ORACLE WORKFLOW

Hi All,
We have this error:
### Detailed Problem Statement ###
Received the following error messages in sysadmin notifications:
Event Error Name: 100
Event Error Message: ORA-01403: no data found
Event Error Stack: HZ_DQM_SYNC>REALTIME_SYNCH(oracle.apps.ar.hz.DQM.realtimesync,
30665979B704AE043C0A81404B04A)
Event Error Name: WFE_DISPATCH_RULE_ERR
Event Error Message: [WFE_DISPATCH_RULE_ERR] ENAME=oracle.apps.ap.payment EKEY=10001
RULE=ap_payment_event_wf_pfg.rule_function SQLCODE=100 SQLERRM=ORA-01403: no
data found
Event Error Stack: WF_Event.dispatch_internal()
In addition, during the set-up of Oracle Approvals Management, there was no available list of
values in the Notification Style in the workflow configurator page.
Action Plan
=======
1) Confirm if the workflow is customized in any way.
2) Confirm whether you are able to select global preferences for the other invoices approval, meaning are you
getting the list of values for the other invoices.
There are no workflow customizations. We are trying to implement it to AP invoice
approval only.
Can you instruct me on how to test this one? I thought I could only select the global preferences from the workflow configuration window. And there are no distinction as to which invoice approval
process it is applicable. Where could I select the global preferences for other
invoices approval?
Thanks a lot

thanks hussein , but still we can not see LOV values even if we inserted data manually...:(
But it has improved and we moved on to another error which is:
*****received the error message:3120: Activity 'APINV/52822' has no performer
### Problem description or inquiry details ###
Received the following error message:
Error Message
3120: Activity 'APINV/52822' has no performer.
Error Stack
Wf_Engine_Util.Notification_Send(APINV, 115191_1, 52822, APINV:APINV_MRA) Wf_Engine_Util.Notification(APINV, 115191_1, 52822, RUN)
Encountered the following:
No list of values in the notification style field in the global configuration region in the Workflow Configuration Page
Please note that we could not update the workflow configuration page using the forms because there
is no list of values to select in the above-mentioned field. We just recently
changed the workflow administrator role from SYSADMIN to KCAALIM to reduce
changing of user log-in. We have previously used the sysadmin user log-in to
access the workflow configuration page. there was still no list of values for
the notification style. we changed the wf admin role to kcaalim using the sql:
udpate wf_resources set text = 'KCAALIM' where name like 'WF_ADMIN_ROLE';
Commit;
Hence, changing of wf admin role and user log-in (to sysadmin) won't help (just in case you would advise me to do so) since we tried it
already.
### Responsibility and navigational paths to reproduce ###
1. set-up the AME for ap invoice approval.
2. test an actual transaction.
3. when the list is generated, set-up workflow for AP approval.
when setting up the configuration page, there is no list of values available for the notification style. hence the workflow
configuration could not be updated.
4. Run the required programs (i.e., synchronizations)
5. run the approval workflow from the developer studio page.
6. review the status from the Status Monitor page.
7. The error message appears
8. payables, create a sample invoice.
9. validate and initiate approval.
10. review the approval history to find out the required approver. (the approver's name appears with 0 amount of approval)
11. check the notifications in the required approver's worklist.
12. there are no notifications sent.
Text continued in next action...
**** screen shots availble >http://rapidshare.com/files/176008682/error_-noperformer.doc.html
Thanks again...

Error messag -'Error while determining ref.mov.type for WM via Table 156S:'

Hi Guys,
I am currently facing some issues with respect to the deliver creation.
The scenario is somthing like this.
I have assigned a FOC Item category to an Consignment Issue order type.
The system is able to determine the Item category successfully.
However when the delivery is created it throws an error message
'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
Not sure why this occurs.
All the settings seem to be set.
If any one of you can help me out it would be great.
Thanks.
Regards,
Pandi

Dear Pandiraj
The standard process is that consignment issue order should be created with reference to Proforma invoice. Having said that I dont understand why you have assigned a FOC item category to issue order. Not sure, whether this will work. Also I feel that you should explain in detail the process for which you are configuring this.
thanks
G. Lakshmipathi

Error in invoice due date

Hi all,
i need to fetch invoice due date data(FAEDT) using the FM 'DETERMINE_DUE_DATE'.i passed ZFBDT(base line date) and ZTERM(payment terms) and fetching the invoice due date.
DATA : ZFBDT TYPE DATS,
       ZTERM TYPE BSAK-ZTERM,
       FAEDT TYPE DATS.
CALL FUNCTION 'DETERMINE_DUE_DATE'
    EXPORTING
      I_FAEDE                          = ZFBDT
     I_GL_FAEDE                       = ZTERM
     IMPORTING
     E_FAEDE                          = FAEDT
EXCEPTIONS
ACCOUNT_TYPE_NOT_SUPPORTED       = 1
OTHERS                           = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
but iam getting error as zterm is not there in the parameters.can you please guide me how to fetch invoice due date.thank you.

Yes Lakshmipathi,The Pricing type in Copy control is G and I also tried to replicate this Issue in our Quality system but I am getting the Netvalue copied from Sales order and no pricing error .
Only thing odd I see on our Production System is that I am seeing this Message
Unit of measure VPRS is not defined within the delivery or UoM group
Message no. O3136
We are in 4.7 IS-Oil System,would like to know the relevannce of this message with the Pricing error in Invoice.
Thanks and Regards
Mohammed Roshan

Error in Invoice Correction Request

by trying to save my Invoice Corrction Request i got a message error as No Control entry for GTS call exists for Document Type RK
How can i solve this issue?
Thanks in advance

Hi,
Check the Log details of the invoive in VF01 screen on top Edit-Log...so u will come to know the reason for this error msg and post the same in sdn if you are not getting the meaning of the same.
Reg,
JJ

ALE-IDoc : Outbound message control for MIRO,IDoc message type for INVOIC

Dear Experts,
                    I am using the IDoc message type INVOIC. For that i have created the new output type. Then i assinged the the Program RSNASTED and form routine ALE_PROCESSING.
                    But when i am saving the transaction in MIRO i am getting the Update Error like VN 056: Processing log for program RSNASTED
                    Please help me to rectify this problem

Hi Dharmendiran,
We also have the same requirement to send status acconf messages on Inbound INVOIC idoc posting..
Can you let me know how you went about creating new output type..did you mean new output type in NACE for application MR?
Thanks.

Error Send Invoice to ECC 6.0

Hi masters.
when I creates an Invoice in SRM the Idoc is send to ECC but return a message error Error in process. into backend in transaction WE02 found the red light with the next message.
EDI: Partner profile inbound not available
what can I do to fix the problem ?

Hello,
Please check this forum thread. it may help.
Re: How to check the ALE settings in SAP
Regards
Mustameer

Pricing error In Invoice

Hello SAP Guru's,
We are getting a Pricing Error in the Overall Proccessing status in the Document Flow against our Invoice.
This error shown below is something we have never seen before ,I could see that the Previous Sales order which was created on 21/01/2015, Pricing was updated manually on 01/28/2015 and subsequent documents like Delivery with Batch Split items were PGI'd and Invoice created on 01/29/2015 is showing the Unit Base prices from the Sales order but the Netvalue or Netprice has not been copied from the Sales order item resulting a Zero Net value in this Invoice and posting document has not been created due to the Pricing error.
The pricing date shown in Invoice is the Order creation date.
Not sure if it’s anything material related,the material was just created recently and I believe this is the first order/billing for this material
Would like to seek your inputs as to what could could be the reason for this Pricing error and Net Value not being copied from Order item to Invoice resulting in Zero Vale Invoice.
Thanks and Regards
Mohammed Roshan

Yes Lakshmipathi,The Pricing type in Copy control is G and I also tried to replicate this Issue in our Quality system but I am getting the Netvalue copied from Sales order and no pricing error .
Only thing odd I see on our Production System is that I am seeing this Message
Unit of measure VPRS is not defined within the delivery or UoM group
Message no. O3136
We are in 4.7 IS-Oil System,would like to know the relevannce of this message with the Pricing error in Invoice.
Thanks and Regards
Mohammed Roshan

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name   : server0
pid         : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
     at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
     at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
     at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
     at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
     at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
     at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
     at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
     ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

Installing Adobe Photoshop 10. Using Windows 7 and IIE. Get message "error:1"

Installing Adobe Photoshop 10. Using Windows 7 and IE. Gt message "error:1"

Not sure what CS3 is. Attached is a screen shot of the error message I get when trying to use Photoshot Elements 10.
Looks like I can't attach a Word or PDF document or paste an immage.
This forum may not be very user friendly.
Let mehttp:// know if there is another way to communicate.
Thanks,
Phil
<Removed by Moderator>

Backup message error -SAP system is running or SAP user is connected to dat

Hello ..
when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
BR0262I Enter database user name[/password]:
BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
BR1025I Please shut down SAP system first or use the 'offline_force' option
BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
BR0054I BRBACKUP terminated with errors
[Major] From: "OMNISAP" Time: 08/08/10 05:31:49
BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
i am new on this, what should i review into the db?
Regards and thanks in advance
Dma.

Hello Daniela,
you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
This is also described in the official documentation:
http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
Regards
Stefan

Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,

HP Print Drivers

I'm trying to download a movie, but I keep getting message error that I have no more room and that I must delete some photos or videos in order to download more movies. How do I delete the videos in order to order more?

I'm trying to purchase and download a movie, but I keep getting message error that I have no space. The error states that I must delete some photos or videos in order to download. I've gone to iPod then edit and deleted some videos, but I'm still getting the message. What is the correct way to delete the videos and should they still be there.

They wont still be there if you delete them,but if you have those same photos on the main computer.

Cannot open itunes receive message Error 7 (Windows 127)

I attempt to open itunes but receive the message Error 7 (Windows 127)
I am running Windows 7 Home Premium.
Have been running Itunes for several years using various iphones, at present on 4S and an Ipad 4.
I have several times uninstalled Itunes, and at the suggestion of support all programmes associated with Itunes, but when I have reinstalled and attempt to start the programme I get the same response.

Hello veijoverde,
Thanks for the question. After reviewing your post, it sounds like you are having launch issues with iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

'Message error' in Invoice

Similar Messages

Maybe you are looking for