Message "Network address default of computer not mainatined" in CV01N.

Gurus,
I just created content repository in OAC0 and linked it to storage type in OACT. Now when I try to checkin the original document in CV01N. Instead of asking me for storage type, its displaying message saying that "Network address default of your computer is not maintained".
Regards,
Rajesh.

HI Rajesh,
Please do the require setting in DC20 define data carrier.
in dc20 : click on define data carrier for server frontend computer. define data carrier there,.slect it and click on the folder Identify frontend computers. Make the setting default there.
Once you make the defualt setting, that error will get resolved.
thanks
regards,
nitin

Similar Messages

Error:Network address DEFAULT of your computer is not maintained

Hi Experts,
I am creating Document InfoRecord using BAPI :BAPI_DOCUMENT_CREATE from a report program, when i execute it, BAPI is
returning a Error: *Network address DEFAULT of your computer is not maintained.* Can any one suggets on this, or i need to do
any setting for Network Address ?
Pleese respond ASAP.
Thanks and Regards,
ALSDIN

This sounds similar to an issue discussed here
http://www.sapfans.com/forums/viewtopic.php?f=23&t=284434

Network address DEFAULT of your computer is not maintained

Hi Gurus,
I'm trying to install DMS (ECC 6.0), when I need to see original document (CV02N) I get the message in subject.
Text help indicates the following:
In the IMG for document management, you need to make an entry with the network address DEFAULT and assign this entry to a data carrier type.
Could you provide me with the steps to achieve that?
I really appreciate your help.
Best regards.

Hi Juan,
Go to transation code DC20 -> select define data carrier type, "server, front end" -> select your data carrier type -> click on identify frontend computer --> click on default entry and save it.
Thanks,
Sam.

Address Book on computer not recognized to iCloud contacts

My Address book data on my computer is not being reflected in iCloud to my Contacts. WHY?

At the bottom of my post is additional catagories which I included 10.7 but its OK cuz I turned off iCloud on my Mac and then turned it back on. EVENTUALLY the Contact info was reflected on my iPhone and iPad. I believe this is called "resetting" iCloud.
thanks anyway

Error message: network copying over 31 characters not allowed, no ownership

I have a MacBook Pro and a Mac Mini on a wired home network. The mini has an outboard USB drive mounted.
I backup the MacBook Pro to that drive. I did this by turning Appleshare on on the Mini, and turning on personal file sharing. I then connect to it from the MacBook Pro by going to the Network prefs pane.
I use Silverkeeper to backup. Until yesterday all of this worked fine. Yesterday I removed the outboard drive from the Mini and added two other USB drives. Both were new, and I formatted both as Mac OS extended (Journaled).
Now, when I try to run Silverkeeper to backup to either of those new drives, I receive a message telling me that copying to the drive ("a Server (AppleShare) volume") may lose some functionality:
- files over 2GB are not supported
- Ownerships & Permissions not supported
- Names over 31 chars not supported
Hunh?
I don't understand why this just started happening, but it looks like an OS issue. Anyone?

Hmmm, with those limits, it seems that it thinks it's an HFS volume instead of HFS+, or HFS+ formatted under Mac OS 9/Mac OS 8 that only supports file sizes of up to 2 GB in size.
And Anthony has some good advice/comments on the connection method, seems HFS+ via NFS has some of those limits.
I use FW drives on most of my Networks, but some USB, and NDAS drives, and use Tri-Backup, never see this probem...
http://www.tri-edre.com/english/index.html
30 day free trial. Can't say enough good about Tri-Backup.

In Photoshop Elements 13 I keep getting a message that says "default printer is not set"; (but it is) therefore I can no longer print. Just started doing this out of the blue. Was printing just fine to start with. This question is Not Answered.

This problem happened once before and it was related to adjusting an image size in Photoshop Organizer. I don't use the organizer anymore but this problem has resurfaced!!!

Same problem here.
This has happened on two individual computers both running elements 13 printing to the same printer.
As mentioned above, the users have taken to printing using windows print and fax viewer.
I've done a clean install of elements 13 and restarted the print spooler. no joy
Adobe, we need a solution!!

In Photoshop Elements 13 I keep getting a message that says default printer is not compatible with this version of Photoshop; therefore I can no longer print. Just started doing this out of the blue. Was printing just fine to start with.

Hope someone can help.

Same problem here.
This has happened on two individual computers both running elements 13 printing to the same printer.
As mentioned above, the users have taken to printing using windows print and fax viewer.
I've done a clean install of elements 13 and restarted the print spooler. no joy
Adobe, we need a solution!!

Network addresses to my PC's

I have 2 wireless PC's and a Mac 5; each are connected to my Airport Express. The Mac works terrific, but I am unable to connect either PC to Airport Express. Each receives an excellent network signal from airport, but I get an error message indicating "...the network did not assign a network address to your computer." What am I doing wrong?
Be gentle, and Thanks!!
GPNP

I have 2 wireless PC's and a Mac 5; each are connected to my Airport Express. The Mac works terrific, but I am unable to connect either PC to Airport Express. Each receives an excellent network signal from airport, but I get an error message indicating "...the network did not assign a network address to your computer." What am I doing wrong?
Be gentle, and Thanks!!
GPNP

Aquiring network address

hi, i have finaly managed to find and connect my laptop to the linksys wireless router wrt54gs. the problem is now i just get an icon up saying "aquiring network address" this is on for about 10 mins, then it says limited or no connection due to no network address provided by computer, and will not connect to the internet. can anybody offer any solutions ? thanks in advance.

I had the exact same message. Your firewall is blocking your internet access from your laptop. If you have Mcafee on the laptop disable the firewall temporarily . This should allow you to acquire a network address.
I suspect this would be the same if use are using a norton firewall.
One other issue. The Linksys installation wizard comes with Norton anti virus software. If you already have Mcafee software on your laptop do not install Norton. Why Linksys does not tell people about the fact that you cannot have Norton and Mcafee running on one computer baffles me.

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Safari of my Macbook (on WiFi) suddenly fails to connect to the Internet. A popup window message says another device on the network is using my computer's IP address.

But then there was still no Internet access even after I have disconnected all other home computers (a total of four including the Macbook and one iMac desktop. For simplicity, I shall categorically called them Mac hereafter unless otherwise specified. The Macs are operating on WiFi.).
The window message recommends changing the IP of either the Macs or the other device. The latter of course does not apply because I don't think the other device is one of my computers.
My questions:
(1) Why did that happen suddenly since the Mac and other computers on the WiFi was working fine in the morning (as well as days before) and then all of a sudden an unknown device is using my computer's IP? As far as I (we) can remember, we did not do any thing unusual this morning nor had we downloaded any special programs.
(2) How do I change the IP since it requires Internet acess to do it and since I can't access the Internet on the Mac?
(3) I am almost sure the problem is not caused by the Internet service because when I connected the Ethernet cable from the DSL modem to an old Windows PC, I got Internet via Internet Explorer. [I am actually sending out this message via IE on my PC.] However, when I cennected the Ethernet line from the modem to a WiFi router (Airport Extreme) and then connect the router and the old PC, I did not get Internet on either the Mac nor the PC. Similarly, there was no Internet on both Mac and PC If I connect Ethernet only between the modem and the router but not between PC and router. So, the question is whether a third unknown party has gotten hold of my Mac IP address and is trying to break into the Mac? Can it steal my personal info?
(4) How can I repair the Mac now and prevent future recurrences? Is changing the IP address the way to do it? (But like I said before I had tried but could not change the IP because I did not have Internet access on the Mac. Is there an alternative method?)
(5) I wonder if a computer's IP address remains constant if you don't change it. The reason I am asking this question is because the aforesaid window message on the Macbook--not sure about the iMac--shows a different IP address--a few numerical digits were changed--almost every time it pops up following every failure trial of mine to access the Internet. Was the Macbook trying to change the IP for me or was there some thing not right?

Re: Another device on the network is using your computer's IP address.
This message/problem was occuring intermittently for me in a household with two MacBooks accessing one Airport extreme. Rebooting the modem and router would only temporarily fix the issue for me, so I spoke with a friend who works for Apple and it seems that the Airport Extreme settings were at the root of our particular issue.
The router(Airport Extreme) recieves only one IP address from the modem and in order to allow it to share the IP address with two computers at once, the solution in my case was through:
Applications>Utilities>Airport Utility>Manual Setup>Internet
under Internet Connection- Select "share a public IP address"
under NAT, check the box for "enable NAT Port Mapping Protocol"
(this will allow the sharing of one public IP address with multiple devices)
if this is a new setting, then click "Update" and the Airport Extreme should reboot itself with new settings applied.
When all else is working properly, this is a satisfactory solution in my case.

What do I do when I continually get the message 'another device on the network is using your computer's IP address' on my iMac?

Hwe continually get this message on our iMac even when other devices in the same room can access the network (laptop, iPad etc). We have tried using a fixed IP address and also an automatic IP selection but to no avail. Any suggestions,

What that means is you were forcing your Mac to always use the network address 123.456.7.89 since you had manually assigned that. Normally this would be fine, your router would check for active addresses in use and assign a different address to any computer or device trying to join the network. The problem could arise if your Mac is off-line and the router has already assigned the IP address to one of your other computers. When you tried to log in with your Mac you would get the conflict message that you have noticed.
Setting all computers to using DHCP will let the router handle the addressing.
I would check all of your computers and PC's. You may have more than one of your computers set to manually assign an address using that same IP address. Make sure you set all of them to DHCP only. Also, check if you have any other IP devices like a printer or NAS drive that is using static addressing. Those can cause the same issues.
It is prefered to use static addressing with those as it makes it easier to find them on the network and since they are pretty much always left on, the router knows they are there.
On your Mac go to System Preferences > Network > Advanced > TCP/IP:
What is shown should read:
Confugure IPv4
IPv4 Address
Subnet Mask
Router
Configure iPv4 using DHCP with manual address
Change that to "Using DHCP"
Apply the change and close the window.
I warn you, I've not yet received my first Mac and it's only an educated guess. I hope it helps.

Receiving message: "another device on the network is using your computer's IP address"; what should I do?

In the last two days I have received this message on my iMac: "Another device on the network is using your computer's IP address..." What should I do?

There are a lot of ways this can occur, but most common is from having devices setup and on a router for a long time and then adding devices and cycling the router. Devices that do not power cycle retain the old IP address. You can shutdown all devices, then power down the router, disconnect power so it is truly shut down, wait about five minutes then power up the router. Give it a couple minutes to capture a new IP address, then one-by-one power up the devices giving each a couple minutes to capture an address. That should then have all devices with unique addresses.

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

Message "Network address default of computer not mainatined" in CV01N.

Similar Messages

Maybe you are looking for