Message No processing because no items were selected

Hi,
We are using AFS SCC 6.0 system.
I am trying to allocate a SO, it is open, and there are no delivery/billing blocks.
The /afs/mdo4 report shows stock in T tab for this SO.
But when i try to allocate i get the message : No processing because no items were selected
Message no. /AFS/MGNT052
And stock is not shown, therefore i cant allocate.
In the past, we have allocated for the same customer / material combination.
Appreciate any ones ideas on the above message that we receive when trying to allocate - No processing because no items were selected
Message no. /AFS/MGNT052
Thanks in advance

Similar Messages

Error: No Actual Line item were selected (Message No. KB420)

Hi All,
I have created order in KO01 and posted the transaction in F-02. And assigned the same order in KH01.
And, now i am trying to Actual cost of line items for order in KOB1, i am getting below error
"Error: No Actual Line item were selected (Message No. KB420)"

HI,
Thank you for the reply.
Madce necessary changes internal order and assigned the correct cost element.
issue got resolved. Thank you

All line items on a Cost Center Are archived, do not see in custom reports - error No actual line items were selected

Hello, experts !
Please advise,
I have a cost center,
on witch I know there are bookings,
1. I do KSB1, have message "No actual line items were selected"
2. I select - extras - data source - archive
in this way I can see my items.
ok.
maybe all bookings are archived.
no:
I de a new movement on this CC - KB11N (exemple) - and on the new one I have the same problem
I se it only when I check "archive",
and do not see it on custom reports.
Why ?
Ay idea ?

Dear Jonny,
Check the T Code: S_ALR_87013611
Then T Code: KSB1 by removing all the filters like date restriction..etc.
Still if you are not finding the postings:
Check the postings in the T code FAGLB03 - Display Balances by giving GL Account.
Postings happen in co module if there is a cost object.
If there is no cost object it will not flow to controlling, that will be in FI.
What you need to do is:
Select your GL
Select your Payment date
Select your Document number.
You can check the same in FBL3N also.
go to the transaction summary and verify the cost object whether it is a cost center or Order...etc.
Also check whether the payment is in parking stage ....?
Regards,
Pavan Kumar Arvapally

Cannot complete the copy command because no pixels were selected

When I try to copy a selected area I get the message "Cannot complete the copy command because no pixels were selected? Why is this?

Are you making your selection on a layer that has something in it?
Also, if you're just starting out with PSE, you must first select something before you can copy it. If you want to copy a whole image, just press ctrl+A/command+A to select it all.

No actual line items were selected

Hi Experts,
i am trying to view accounting document for delivery by vl03n, system shows errors as 'No actual line items were selected'.
All the authorizations are on place, SU53 screen shows 'The last authorization check was successful'
Please advice how to check Accounting document for Delivery.
Thanks in Advance,

Dear Prasant,
Are you going to view the PGI A/C entries, okey then In Vl03n>>> Click on Display Document flow Icon or press F7 for Display document flow while entering delivery in vl03n.>>>Please click on gd issue and again click on Display document button >>>a material document screen will appeear to you. In that click on accounting documents.
or try tcode mb03 for the same.
Regards
G.J.Raju
Consultant-SAP SD

When I try to select bookmarks I am stymied because the mouse control is overridden. This became a recent problem. The way it worked in the past is that items were selected only when left mouse button was pressed.

I select from bookmarks menu a folder containing folders & bookmarks, but I cannot select what I want because an automatic action occurs where my mouse cursor is right then. Selecting what I want from the list is impossible as an undesired selection opens inadvertently, without me any positive action by clicking left mouse button. This problem did not exist 6 months ago. This is now a big problem for me. I'm going to stop using FireFox if this problem cannot be fixed soon!

You do not delete bookmarks in the Customize window.
You need to open the Library if you want to delete bookmarks.
*Bookmarks > Show All Bookmarks
* https://support.mozilla.com/kb/Deleting+Bookmarks

Document could not print because no pages were selected to print

I have indicated page 151-200 to print. receive the error above

With the limited amount of information you have provided, its virtually impossible to find the reason behind this issue.
Please provide some more information as below:
1. Your OS
2. The version of Adobe Reader on your system (Help > About Adobe Reader)
3. The printer model being used.
4. Is the issue specific to a certain PDF or all PDFs in general. Does it happen with: http://helpx.adobe.com/content/help/en/acrobat/release-note/release-notes-acrobat-reader/_ jcr_content/main-pars/download/file.res/Acrobat_Reader_ReleaseNote_10.1.4.pdf

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Process chain activation : 0 c hains were selected

Hi all
I have scheduled process chains in production.
Because one of the metachain is showing error while loading infopackage,in the production I have created a new infopackage and added it to the chian.Then activated the metachain.
But when i was trying to activate the main chain it showing message"0 chains were selected"
As a result when i scheduled the chain the old meta chain comes into picture instead of the modified chain.
ERROR MESSAGE
0 Chains Were Selected
Message no. RSPC031
Diagnosis
Specifying process chain ID 'ZN_0MATERIALATTR, type V2&', and variant '' has resulted in the selection of 0 process chains. The selection has been called without confirmation by the user. This means that the user was unable to make a selection.
System Response
The function is terminated.
Procedure
There is porbably an error in the program. Look for corresponding notes.
Please let me know how to solve this issue.
Thanks,
harika.
Edited by: harikag on Nov 9, 2011 6:33 AM

Hi harika,
Looks like the new meta chain was not in activated state....
Was the meta chain active and scheduled?
Is the meta chain running for the first time?
Also check the scheduling options how the Meta process chain is triggered?
if so , Make sure the event exist in the new meta chain. this may be causing the error.
if you had changed and created a new meta chain try to activate the new meta chain once and schedule it again and check.
Have you transported the PC or created in Production directly?
if transported from dev to prod check the log if there are any errors?
Also check if the below s note helps you
Note 1323015 - Correction: RSPC031 during transport of metachains
Regards
KP
Edited by: prashanthk on Nov 9, 2011 12:16 PM

Message- Print No pages from the document were selected to be printed

I have had this application for some time, simply never used it. Last night I tried converting a PDF file to word, unsuccessfully, I might add.
Today, whilst printing a page, my printing settings appear to have been reset because when I selected Print selected page, the following message appeared:
Print
No pages from the document were selected to be printed message
How do I reconfigure my settings to preview rather than defaulting to PDF? Kindly advise. Cheers.

I have only been able to print by exporting from iphoto. I have a new HP printer and there is software that supports photo printing ("HP photo smart") and I have been able to do it this way. On some occasions I have been able to use the iphoto>print>then preview before actually printing. There is a print option on the preview pane and that has worked on occasion...unsure why it doesn't work always. Please pass on any other hints, or let me know if this works for you!!
G4 Power book 867Mhz Mac OS X (10.3.9)

Some items were not copied to the iphone because they cannot be played on this iPhone

Hi Team,
I am using IPhone 2G Model: A1203. While iam transfering Videos(mp4 format) from itunes to iphone it shows this Error "Some items were not copied to the iphone because they cannot be played on this iPhone". Itunes is 11 version Please help me to get rid of this error.
Thanks in Advance

Hey Ratnakar Reddy,
Thanks for the question. I understand that you are experiencing issues syncing your iPhone with iTunes. The following resource outlines the exact error message you are receiving:
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod
http://support.apple.com/kb/TS1497
Thanks,
Matt M.

No records were selected message when I execute the KE30

Dear All,
I have created a CO-PA Profitability Report by Report Painter and when I execute the KE30 ,system is giving a message as "No records were selected ".
I have checked the actual line item report (KE24),all the values are flowing and showing under value fields tab.Even in KE30 ,I could see the report layout ,but values are not appearing.
Please help me to find where it went wrong.
Regards
Subbu

Hi Subbu
1. Check your record type..Billing data has record type as F... see your form in KE35 and check it
2. Execute your report with selection parameters like Comp Code and the Period... Once the data is displayed, you can further refine the selection criteria
3. Also check in KE35 -
a. The Plan/Actual indicator.. You should select "Actual values" in it
b. the currency type - Select as applicable to you
Regards
Ajay M

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please help

Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

Everytime I try to export my slideshow I get the "The operation can't be completed because the item can't be found." message. How do I fix?

Trying to export a pretty basic slideshow to our desktop/iTunes and I keep getting the "The operation can’t be completed because the item can’t be found." message when I try to export. What am I doing wrong?

What is your iPhoto version?
Your slideshow may contain a photo or a video where the original file cannot be found. Try to find the offending item.
You could duplicate the slideshow (select it in the source list, ctrl-click, and the select "Duplicate").
Then remove half of the photos from the copy and try to export this partial slideshow. if it works, you will know, the problematic photo or video is in the other half.
Keep duplicating the slideshow, removing photos from the copy and testing with smaller sets of photos, until you know exactly, which photo it is.
Then select this photo and use the command "File > Reveal Original" to see, if the original file is still there.
Check the revealed original, if Preview can display it. If the file is o.k., copy it and remport it. Add the new imported photo or video to your slideshow.
If the original file should really be missing, restore it from your backup.

What do I do with error message "items were not synced"?

Twice after syncing my iPad, I got an error message that "items were not synced. See iTunes...". What does this mean, and what can I do about it? Second problems is that after I unchecked several books, they still show up on my iPad. I have read them and no longer want them on my iPad.

Select one of them and
click File>Get Info>Summary ... is the format/encoding/bitrate one of the following:
AAC (M4A, M4B, M4P) (up to 320 kbps)
MP3 (up to 320 kbps)
MP3 Variable Bit Rate (VBR)
WAV
AA (audible.com spoken word, formats 2, 3, and 4)
AIFF

Message No processing because no items were selected

Similar Messages

Maybe you are looking for