Message Pool Problem

I have a program that it functions perfectly in the environment of Development, but when I carry to Quality, the messages of the Message Pool do not appear more. Just the "Message Key" appears instead of the "Message Text".

Hi Bruno,
can you please check this thread for much similer problem.
Problems with Message Pool
Regards,
Sukalyan.

Similar Messages

Problem with accessing message pool text messages

Hi,
Getting the text defined in the message pool using
wdComponentAPI.getTextAccessor().getText("TXT_SELECTED_ITEMS_COUNT")
with key TXT_SELECTED_ITEMS_COUNT, the text is
"You have selected {0,choice,0# no P.O. line items to accept|1#one P.O. line item to accept|1<{0,number,'#'} P.O. line items to accept}"
After checking with the debug, wdComponentAPI.getTextAccessor().getText("TXT_SELECTED_ITEMS_COUNT") is giving me the text as
"You have selected " instead of
"You have selected {0,choice,0# no P.O. line items to accept|1#one P.O. line item to accept|1<{0,number,'#'} P.O. line items to accept}"
Can somebody help?
I need to get this text as
"You have selected {0,choice,0# no P.O. line items to accept|1#one P.O. line item to accept|1<{0,number,'#'} P.O. line items to accept}" so that my messageformat.format works correctly when i display on the screen.
Thanks
Sirish

Hi,
Tried what you suggested i didn't get what i wanted, message displayed completely as below if
paramter is 1 (selected one row)
You have selected 1 ,choice, 1 no P.O. line items to accept| one P.O. line item to accept 1<1 P.O. line items to accept"
for message as below in the pool
You have selected ,choice, no P.O. line items to accept| one P.O. line item to accept 1< P.O. line items to accept"
But, what i wanted to display (as per choice pattern) the message is
You have selected no PO. line items to accept -> if don't select any rows
You have selected one P.O. line item to accept -> if i select one row in the grid
You have selected 2 P.O. line items to accept -> if i select more than one row in the grid
number 2 , is passed as argument to messageformat.format(string,args)
where string is the message text from message pool
Thanks
Sirish

Message.messagekey is coming instead of message text of message pool

Hi All.
I am facing one problem , I have created one error message in message pool ,and
I am validating the field but when I am trying to use this ,Its highlighting the fields but
message is not coming instead message.messagekey is coming.
I am using the following code:
ai=wdContext.getNodeInfo().getAttribute(IPrivateVEmployeeRequestView.IContextElement.DATE_OF_RESIGNATION);
messageMgr.reportContextAttributeMessage(wdContext.currentContextElement(),ai,IMessageCEmployeeRequest.MSG, new Object[]{" resignation date is a non-working day. Please select a working day"},true);
Thanks in Advance.
Regards
Abhishekh Singh

Hi Abhishekh,
Could you please check the message pool entry for the error, refer below example:-
Message Key Message Type Message Text
MissingInput error : Entry of a valid is required for proceeding with the requested service.
Deepak!!!

Message pool cannot be resolved - importing a project to nwdi dc component

Hello guys,
I'm trying import a project to the nwdi structure, but I'm passing by a lot of problems.
At first I cant compile my application. The message pool class IMessage[ComponentName] arent been generated in the directory .\DCs\[vendor]\atr\_comp\gen_wdp\packages\[package name]\wdp. I try reload, repair, open and close, upgrade the IDE (now Im with 2.0.12). I tried until put the file manually, I generated by the previous project (out of the nwdi/dc/structure) and I tried put it in the actual solution, however its deleted each build.
Second, I'd like to know how create a dependency to an external jar (for example mail.jar) in the CBS. Should I only put the jar in the lib directory and upload in the dtr? Or should I put it in the CMS dependencies - how to?

For the first problem.
Import the project in the NWDI. Then navigate to the component where message pool belongs to. There will be a action Repair in the component. Execute that.It seems the metadata is corrupt and hence generation halts. This will correct the metadata and then generation should work correctly.
For the second problem.
You can create a external jar dc. And put the jar in lib folder of that dc.
Submit this dc.Create dependecy to this dc to access the jar.
See these bolgs for creation of external dc's
/people/bala.krishnan2/blog/2006/09/25/bid-adieu-to-bots--using-captchas
/people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro
Regards,
Ashwani Kr Sharma

The message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." is displyed when I try to log on to my internet banking. Please can you tell me why?

Since upgrading to the latest version of Firefox, I'm now getting the message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." when I try to log onto my internet banking site. This occurs after going thru the first two steps of the login process. I don't get this problem when I login to all my other bookmarked sites, or when I use Internet Explorer. I'm using Windows XP. Any suggestions? (Note: I've just reloaded version 6 of Firefox, but it's not made any difference.)

See here > http://support.apple.com/kb/HT1527
From Here > http://support.apple.com/kb/TS1368
More info here > http://www.apple.com/support/itunes/downloading/

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Regarding Message Pool In web Dynpro

Hi
I have created the InputForm application for error handling.... In that i have created the Message Pool. A class IMessage<ComponentName> has been genrated automatically. Inside this class whether i have to write the code for create CONSTANT keys or else it will automatically create ... Because i am not getting code inside... its generating empty class.....
like
public class IMessageSimpleErrorsForm{
but i have gone through one application which is already created and deployed.... In that I found the following class for creating CONSTANT keys
public interface IMessageSimpleErrors {
ErrorMessage <code>"Please enter a valid date for field {0}. You entered , which is a date in the future and therefore not a valid date of birth."</code> using
key "DateIsInFuture".
public static final IWDMessage DATE_IS_IN_FUTURE = new WDMessage( "com.sap.tc.webdynpro.tutorial.errorbehavior.IMessageSimpleErrors" , "DateIsInFuture", WDMessageType.ERROR);
Warning <code>"You did not enter an e-mail address. Therefore, you will not be informed about product news and special offers."</code> using
key "DesiredEMail".
public static final IWDMessage DESIRED_E_MAIL = new WDMessage( "com.sap.tc.webdynpro.tutorial.errorbehavior.IMessageSimpleErrors" , "DesiredEMail", WDMessageType.WARNING);
ErrorMessage <code>": Entry of a valid is required for proceeding with the requested service."</code> using
key "MissingInput".
public static final IWDMessage MISSING_INPUT = new WDMessage( "com.sap.tc.webdynpro.tutorial.errorbehavior.IMessageSimpleErrors" , "MissingInput", WDMessageType.ERROR);
please help me
Thanks & Reagards
Ravi Shankar B

Hi Ravi,
Pay attention that constant are generated only for messages types Standart, Warning and Error but not for Text.
Best regards, Maksim Rashchynski.

Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

HP Pavillion DV7 notebook PC
Windows 7 64
intel I5
6 gig memory
service pack 1
I am trying to identify a problem with my HP Pavillion dv7 laptop
Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
any help would be great this PC has a lot of info on it and I dont think it is a lost cause
thanks

Hi duddy, sorry to hear that you are having issues with your computer over heating. I have found a document that will assist you with Restoring the BIOS. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue. http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
If you are still having issues, please let me know and I will be happy to offer more assistance..
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How to read messages in message pool from a java file

Hi All,
I want to read a message that is defined in a message pool of a webdynpro component.
This reading should be done from a java file present in the "src" folder.
How can I get the handle to the IWDComponent?
Or is there any other way?
Or is there any way of reading localized messages in a java file of a webdynpro component?
Can you kindly guide me out of this issue?
Thanks and regards
RB

Hello,
my approach is more simple: how can I read within component A the message pool of another webdynpro component B ? Component A has a usage relation to component B .
I tried this within component A:
<b>this.wdThis.wdGetBInterface().wdGetAPI().getComponent().getTextAccessor().getText("ANY_TEXT");</b>
I got the exeption:
<b>java.lang.UnsupportedOperationException: Embedded Components are black boxes. You should not access parts which are not in their interface</b>.
Is there any way to share message pools ?
Thanks
Kerstin

Oracle.DataAccess 2.112.1.0 - Connection Pool Problem

Hi,
Oracle.DataAccess 2.112.1.0 is having connection pool problem. The no. of TCP connections to Oracle database keep increasing untill the server's session run out of limit. My application created connections, use them, close them, and dispose them properly. When using previous Oracle.DataAccess 2.111.6.20, the no. of TCP connections do not increase.
My database connection string has "Min Pool Size = 3 and Max Pool Size = 150".
With 2.111.6.20 version, TCP connection stays at 3.
With 2.112.1.0, TCP connection keep increasing for every 5 minutes. I've tried to disable Self Tuning, but still can't prevent the connections from increasing.
Later today, I downloaded Oracle.DataAccess 2.112.1.2 (it comes with ODAC 11.2.0.1.2) and test again, the problem is resolved... no more connection increases... but.... it is only for 32 bit Windows.
Unfortunately, there is no Oracle.DataAccess 2.112.1.2 for 64 bit Windows Server 2008.
May I know how can i resolve this problem on 64bit Window installed with Oracle 11g R2 client, which comes with Oracle.DataAccess 2.112.1.0, which has serious problems...(according to this 11.2 ODP.NET causing test runner failures )
Many thanks for your time and answers!
Edited by: user1502907 on 04-Sep-2010 23:01

Hi,
The only thing that jumps out within your problem description is that connections are being increased every 5 minutes. Are you sure its every 5 minutes and not 3 minutes which is the timing interval used by the Connection Pool facility to perform connection pool maintenance. If this occurs even when the application is idle then you could be running into the following known issue filed against 11.2.0.1.0 and fixed in 11.2.0.1.2.
Bug 9711600 - CONNECTIONS INCREASE BEYOND MAX POOL SIZE EVERY 3 MINUTE
This is specific to using the option CommandBehavior.CloseConnection when calling execute reader. Are you using this option and then also closing the connection in code before the datareader object is closed, if so you may be hitting this bug. You can also generate an ODP trace at level 15 of the behavior and if you see negative pool counts, that is also a diagnostic that points to this bug.
This is fixed in 11.2.0.1.0 Patch 3 or later for x64. If you have support, I recommend you open a service request to verify if this is your issue and if a patch set may help you.
Regards
Jenny B.

Shortly after launching into itunes, it freezes and I get the following message: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. How do I resolve this issue?

Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?

That is what I thought. Cannot figure out how to turn it off, though.
However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise.

ITunes will not open, no message of problems

iTunes does not show up whenever I click on it, and no message of problems comes onto the screen. Absolutely nothing at all happens. Help?

See if QuickTime will open. iTunes uses QT codecs to play everything.
Sometimes QT will give an error message, where iTunes won't.
Also here is an article with lots more ideas to try:
http://docs.info.apple.com/article.html?artnum=93976

I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.

I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.
Thanks
Celeste

I rented a movie (The Hobbit)...but it stops loading.
The movie costs CHF 7.50.
A phone call to the support team costs CHF 46.-- !!!!!
What do you think I will do?
Pisella Verde

How to bold a word in message pool?

I have a message string created in message pool "Hello World".
Is there a way that I can bold the word "World" only?

Please look at the below thread
message manager

How to display the Message Pool Messages in CE 7.2

Hi Experts,
Please let me know how to display the Message Pool Messages in CE 7.2.
I have tried with reportContextAttributeMessage, but it is deprecated in CE 7.2.
Please do the needful.Its Urgent.
Thanks & Regards,
SatheshKumar R

Hi Sathesh,
Do the following steps:
1.) After creating a component, under it you will see Message Pools. Double click and open it.
2).Click "Add Message" and add a new message. (Give a message key, type of message (either warning, error etc ) and message text).
3). Save the metadata.
4). Raise this message where all you want by using following code(For example, on click of a button) :
      IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
      msgnr.reportMessage(IMessage<component name>.<message>,null,true);
For example, I have a component name TestAppComp and under message pool I have message called message1, then use lik this:
        IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
        msgnr.reportMessage(IMessageTestAppComp.MESSAGE1,null,true);
Reply me if you any doubt.
Regards,
Jithin

Message Pool Problem

Similar Messages

Maybe you are looking for