Message processing failed if we receive attachments via E-Mail

Dear ladies and gentlemen,
we have follow proccess:
We get some e-mails with an attachment. The E-Mail pick up the messages and send it to an RFC Channel.
I changed the payload via the localejbs/AF_Modules/PayloadSwapBean :
localejbs/AF_Modules/PayloadSwapBean Local Enterprise Bean TRANSFORM
and the module configuration looks follow:
TRANSFORM swap.keyName payload-name
TRANSOFRM swap.keyValue MailAttachment-1
it looks good and the payload would be swapped okay, and the mapping is also okay.
But if we push the message to the RFC Adapter I get follow error message back:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
So now my question: If is possible, that the adapter try to send also the Body of this E-Mail to the target system ? Because the
Message ID is the ID from the payload of the E-Mail Body.
It is possible to keep away the E-Mail Body from the payload?
Because we need only the attachment. Or if I I have to setup via Bean anything in the RFC Adapter ?
Thanks
Kind reagards
Stephan Kohler
P.S. The PI System is an PI 7.1, the target system would be an R/3 4.6. I haven't any success with the RFC Adatper version 7.10 or 6.40

> Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
>
Is your attachment an XML? Is this XML structure is same as what you mapping source is? If that is the case, it should be okay. Is this interface working for non-mail sender? You might want to re-import the RFC structure in to PI again.
VJ

Similar Messages

Message processing failed, FTP Receiver Adapter error...

Hello all,
We have a Idoc to File(FTP) scenario using PI.
When PI try to send the file out to the FTP site, we get the following message in the communication channel monitoring and the file never reach the FTP site:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: ConnectException: Connection timed out: connect
When we look at the detail display, we can see that the connection as been establish with the FTP site but the adapter is unable to deliver the file...
Any Idea why?
Thanks in advance.

Hi ,
There are two things that you can do
1- check the connection of FTP from command prompt. If it is acceebile from command prompt then check for authorization that wether you have access to post the file at FTP or not (Full access READ , WRITE and EXCECUTE)
2- in your adpater change the connection mode from Per file transfer to "Permanent".
Please feel free to reply on this thread if you are not able to.
Thanks

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableExcep

Hi,
I am generating IDoc for infotype 2006 through creating Change pointers using the Function Module 'CHANGE_POINTERS_CREATE_DIRECT'.
The problem is the Idoc is not reaching the receiver system. It is showing the below error message when i checked it in RWB Communication Channel Monitoring,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): com.microsoft.sqlserver.jdbc.SQLServerException: Warning: Fatal error 7987 occurred at Dec 17 2009 1:43PM( $ . Note the error and time, and contact your system administrator.
The scenario is Sender: Idoc and Receiver : JDBC adapters.
Please let me know how to solve this issue.
Thanks,
Sri

Hi,
From the error message: "Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): ". I think:
(a) If there is any data type mismatch like a character field from PI is trying to post into a date or numeric field in the stored procedure. You need to check if the data type of the fields in PI and the stored procedure are same?
(b) If there is any structure mismatch when the XML is created by BADI like any mandatory fields are missing.
Thanks,
Manohar Dubbaka

Message processing failed in XML parser

This is IDoc to file integration. When I test (WE19), I did not put any value in the 'Quantity' field (which is 6 characters long).In the message mapping I put a condition to see if the value is empty then put zero, and it did not give any error. I have given all the fixed field lengths in the file adapter but still getting the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value 'TABLERO DE CONTROL' too long (>6 for 2. column) - must stop', probably configuration error in file adapter (XML parser error)'

When I enter value in the 'Quantity' field, the integration works fine. The value 'tablero de control' is the 'Description' which is the next field. My Content Conversion is like;
Field1, Field2, Quantity, Description
(where Field1 and Field2 are mandatory and Quantity and Description are optional)
When I provide all 4 values, the integration work just fine, when I do not provide 'Quantity' it fails.

Message processing failed: Invalid http response: 220

Hi Experts,
I am working on FILE to SOAP scenerio. File is coming in XI properly. But in the SOAP CC its showing this error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid http response: 220 (Name of the Interanet of the Company) Microsoft ESMTP MAIL Service, Version: 6.0.3790.1830 ready at Thu, 23 Oct 2008 12:02:22 +0530 : java.io.IOException: invalid http response: 220 (Name of the Interanet of the Company) Microsoft ESMTP MAIL Service, Version: 6.0.3790.1830 ready at Thu, 23 Oct 2008 12:02:22 +0530
Any ideas ?
-=Soniy

Hi Sonia,
Please go throgh the following links for use ofr XML SPY
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7ccd3e4e-0501-0010-95ae-afa58cb46b75
Re: Stand alone testing using XML Spy
WSDL frm Altova xml spy
Invoke Webservices using SAPXI
Testing XI exposed Web-Services
Regards
Sridhar Goli

Form help - receiving responses via e-mail (Acrobat 9 Pro Extended)

I have created a "test" form in Acrobat. The question fields are proprietary content and thus security is set such that the recipient cannot copy, change, or print the form. The answer fields are drop-downs with A - D options. I have sent the form to myself as a test and all that works properly. I need to be able to receive completed forms via e-mail (or just the data if that works) but need to eventually be able to export (or copy) each response set, in order, into MSExcel. When I tried to send the completed form via e-mail, it indicates the form cannot be saved (obviously due to security settings) and thus the changes (answers) will not be part of the form - only the original with the default answers.
How can I enable responders to send me the test answers via e-mail, without compromising the proprietary nature of the form's content?
Also, I would prefer not to use the Adobe on-line repository because, as I understand it, gives the user access to the form via the web.
I do have a web site in which I could host the test and allow users to access it, take the test, and then submit the answers.
THANKS!!!!

I finally got our webmaster to put the link to the form online so that I could test the form. It is not sending to the address specified. I have setup the Submit button as follows: in the window under Enter a URL for this link: the URL was input as MailTo: [email protected] (there is a space between MailTo: and the e-mail address). After submitting Outlook 2k3 sends back an undeliverable message. Is the space in the URL causing the issue or is it something I need to run by our security people due to the way the form is being submitted?
Many thanks,
Mike

Attachments via Apple Mail

I've searched and did'nt find an answer to my problem (hopefully I didn't overlook), so I made a post.
Lately, my clients and recipients haven't been able to receive my attachments when I send using the Mail.app. If I send a PDF or a regular JPG file they're not able to view or download them, but it shows up on my sent folder as a successful transaction.
How can I fix this, any solutions?
Thanks.

Thanks for the quick response...
I highly doubt it has anything to do with the file size, I use Yahoo Mail via POP3, the PDF I sent was 67KB and the JPG was 1.73MB.

Sending pdf attachments via e-mail in BSP

Hi all,
i have written a code for sending email to a given mailid with some text but
can anyone tell me step to step procedure for sending pdf attchments to mailid.
Thanks and Regards,
Sneha Puppala.

Hi ravikiran,
This is my code for sending email with attach:
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<%@extension name="bsp"   prefix="bsp"%>
<htmlb:content id="content" design="classicdesign2002design2003" controlRendering="sap"
               rtlAutoSwitch    = "true">
<htmlb:page title = "BSP Extension: HTMLB / Element: fileUpload">
    <htmlb:form method = "post" encodingType = "multipart/form-data">
<head>
    <link rel="stylesheet" href="../../sap/public/bc/bsp/styles/sapbsp.css">
    <title>mail to </title>
</head>
    <bsp:testSuite id="testSuite" name = "<fileUpload>" key = "<%=content->design%>">
        <% IF NOT %_testSuite->id_list IS INITIAL.%>
        <bsp:testCase nr="DATA" text = "Data Handling"/>
        <table border="1px" cellpadding="1px" cellspacing="0px" style="font:normal 10pt Arial">
          <tr> <th>id</th> <th>File Name</th> <th>Content Type</th> <th>Length</th> </tr>
          <%-- Notice: It's recommended to do input processing in onInputProcessing
            event block, not in onLayout block like in this case. --%>
            <% DO.
                DATA: fu        TYPE REF TO CL_HTMLB_FILEUPLOAD,
                    next_id   TYPE STRING.
               next_id = %_testSuite->next_restore_id( ).
               IF next_id IS INITIAL. EXIT. ENDIF.
                fu ?= CL_HTMLB_MANAGER=>GET_DATA( request = request id = next_id name = 'fileUpload' ).
          %>
            <tr>
                <td><%=next_id%></td>
                <td><%= cl_http_utility=>escape_html( fu->file_name ) %> </td>
                <td><%=fu->file_content_type%> </td>
                <td><%=fu->file_length%></td>
            </tr>
          <% ENDDO. %>
        </table>
      <% ENDIF. %>
      <%----
%>
      <%
         DATA: event            TYPE REF TO if_htmlb_data,
               fileUpload_event TYPE REF TO CL_HTMLB_FILEUPLOAD.
         event = cl_htmlb_manager=>get_event_ex( request ).
         IF event IS NOT INITIAL AND event->event_name = htmlb_events=>fileupload.
           fileUpload_event ?= event.
      %>
          <table border="1px" cellpadding="1px" cellspacing="0px" style="font:normal 10pt Arial">
            <tr> <td>Event-Class</td>              <td><%= event->event_class%>                  </td> </tr>
            <tr> <td>Event-ID</td>                 <td><%= event->event_id%>                     </td> </tr>
            <tr> <td>Event-Name</td>               <td><%= event->event_name%>                   </td> </tr>
            <tr> <td>Event-Type</td>               <td><%= event->event_type%>                   </td> </tr>
            <tr> <td>Event-Server Name</td>        <td><%= event->event_server_name%>            </td> </tr>
            <tr> <td>Event-Defined</td>            <td><%= event->event_defined%>                </td> </tr>
            <tr> <td>FileUpload-Name</td>          <td><%= fileUpload_event->file_name%>         </td> </tr>
            <tr> <td>FileUpload-Content_Type</td> <td><%= fileUpload_event->file_content_type%> </td> </tr>
            <tr> <td>FileUpload-Length</td>        <td><%= fileUpload_event->file_length%>       </td> </tr>
          </table>
      <%
         ENDIF.
      %>
      <%----
%>
      <bsp:testCase text = "upload attachment" />
      <htmlb:fileUpload id       = "<%= %_testSuite->seq_nr( )%>" />
      <htmlb:button     id       = "submitButton"
                        text     = "Upload"
                        onClick = "HandleUpload" />
      <%----
%>
<html>
<body class="bspBody1">
<H1 class="bspH1"> Consultation-Service </H1>
    <form method = "post" action="<%=page->get_page_url( )%>">
      <table class="bspTbvStd" cellpadding="4">
        <tr>
        <td class="bspTbvHdrStd" colspan="2" align="center"><font size="4">Address</font></td>
        </tr>
        <tr class="bspTbvCellStd">
          <td>Name</td>
          <td><input type="text" name="name"
                     value="<% page->write( value = name ). %>" size="40" ></td>
        </tr>
                <tr class="bspTbvCellStd">
          <td>Mail address1</td>
          <td><input type="text" name="mail_address1"
                     value="<% page->write( value = mail_address1 ). %>" size="40"></td>
        </tr>
        <tr class="bspTbvCellStd">
          <td>Mail address2</td>
          <td><input type="text" name="mail_address2"
                     value="<% page->write( value = mail_address2 ). %>" size="40"></td>
        </tr>
      </table>
      </bsp:testSuite>
    </htmlb:form>
    </htmlb:page>
</htmlb:content>
    </form>
</body>
</html>
On Input Processing:
if page->messages->num_messages( ) eq 0.
if mail_address1 is not initial and mail_address2 is not initial.
      call method application->send
        exporting mail_address = mail_address1
        changing messages     = page->messages .
    call method application->send
        exporting mail_address = mail_address2
        changing messages     = page->messages .
    if page->messages->num_messages( ) eq 0.
      data text type string.
      text = application->get_text( ).
      navigation->set_parameter( name = 'mailtext' value = text ).
      navigation->next_page( 'show' ).
    endif.
else.
    navigation->next_page( 'no_address' ).
endif.
endif.
"method send in defined class":
method SEND.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lt_att_content_hex type solix_tab,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please find the attached report.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Visit report' ).
data: data_tab type solix_tab,
      p_data type XSTRING.
call function 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      buffer     = p_data
    TABLES
      binary_tab = data_tab.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Visit Report'
I_ATTACHMENT_SIZE =
I_ATTACHMENT_LANGUAGE = SPACE
I_ATT_CONTENT_TEXT =
I_ATTACHMENT_HEADER =
i_att_content_hex = data_tab ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment
Pass the document to send request
lo_send_request->set_document( lo_document ).
Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value '[email protected]'.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'The visit report has been sent' type 'I'.
Thanks and Regards,
Sneha Puppala.

Error receiving AS2 message from partner: B2B-50037: B2B inbound message processing error

B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
        at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
        at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
        at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
        at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
        at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
Ken

Ken,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work.

Re-processing failed messages in queue automatically

Hi,
While executing messages via PI to external system, sometimes the messages stucked in inbound queue with status "SYSFAIL" with status text "Command to tRFC/qRFC: Execute LUW again" (communication problem). The only way to execute LUW again is via DEBUG mode (F8). After using F8 the message runs and the queue released until the next time.
How can I execute those messages with F6 (Execute LUW) or by any scheduling program (preferability to scheduling program)?
Regards,
Gil

Hi Gigi,
As stated in one of the blog (/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically):
For automatic qRfc failure recovery, Schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues.
Also, refer the following threads for more information on this topic:
Re-Process failed XI Messages Automatically
/people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm

I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."

I have recently bought an iPhone 4S and I am trying to install iOS7. The install initially failed and I received an error message. I attempted a restore, however, the progress bar is now stuck at "Restoring iPhone software.."
I'm still attempting to restore it, but the process goes as follows
- Extracting software.
- Waiting for iphone.
- Preparing iphone software for restore.
- Verifying iphone software.
- Restoring iPhone software.
It is at this point where it begins to load approxiamtely 10% and then freezes. I have had the handset connected 7 hours with no progress and this is my third attempt since Friday. Please help.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743

HT4623 update process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet."

my iphone 5 is connected to a wi-fi network and i'm able to browse the web and receive emails. however when i try to update the software the process fails with the following message "Unable to Verify Update. iOS 6.1 failed verification because you are no longer connected Internet." It gives an open to "Close" or "Try again", but the retry is also unsuccessful.

Try to connect to secure web site. If you can't, that would mean that your iphone is unable to authenticate itself to apple servers in order to download update. If you can - I would still guess same but with less certainty and suggest to update on another network.

Trouble opening pdf's - I have received several pdf's from a friend via e-mail (Thunderbird). Some of them open just fine but others give me the message: "There was an error opening this document. The file is damaged and could not be repaired."

Trouble opening pdf's - I have received several pdf's from a friend via e-mail (Thunderbird). Some of them open just fine but others give me the message: "There was an error opening this document. The file is damaged and could not be repaired." My friend made sure that the files in question opened without issue on his computer (a PC). Further, I was able to open one of these "damaged" files on my Android phone, but I cannot open them on the Macbook Air. Any help would be greatly appreciated.

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

Message processing failed if we receive attachments via E-Mail

Similar Messages

Maybe you are looking for