Message Receive question in Point to Point

How can I make sure that my queue receives second message only after finishing the process for the first message?

Hi,
It is posible that a system receives two messages and with multithread process the 1st message finish after the 2nd message.
I use correlation ID and a selector in oder to receive. When the system process a message I put the message id by the send mesage in the correlation id for the repond message.
In the client I use a selector with the MessageId and the correpond id.
Thanks

Similar Messages

Message received: icloudexe.entry point not found. Do you know how to fix?

message received: icloudexe.entry point not found. Do you know how to fix?

Try a system maintenance utility like Yasu:
http://jimmitchell.org/projects/yasu/
Free for use, though the developer accepts donations.
Most likely you need to repair permissions and Yasu will do that for you and some other general housekeeping.

When I open my computer I receive the following message: The procedure entry point sqlite3_wal_checkpoint couldnot be located in the dynamic link library SQLite3.dll How can this be corrected? I never got this message before and I have a iPhone and iPad

When opening Windows 7 I'm receiving the following message The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.......I have never rec'd this before............I have a iPhone and iPad...............How can this be corrected without interferring with the information on my computer? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

I downloaded the latest version of itunes. Now I cannot open iTunes. I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll. Thoughts?

I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll

Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll'
This appears to be a common problem, can anyone provide me with a 'user friendly' solution please?

Remove MobileMe if still present on your computer.
Otherwise see Troubleshooting issues with iTunes for Windows updates.
tt2

Hi, i received message "The procedure entry point xmITextReaderConstName could not be located in the dynamic link libery libxmI2.dll" when ever i switch on the PC?

Hi, i received message "The procedure entry point xmITextReaderConstName could not be located in the dynamic link libery libxmI2.dll" when ever i switch on the PC?

It's a simple fix and doesn't involve reinstalling anything.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck

I am getting this error message" firefox.exe entry point not found, the procedure entry point is ThreadDesktopComposited could not be located in the dynamic link library user32.dll" before Firefox opens up

this is the only error message that comes up, then Firefox opens up

This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
http://support.microsoft.com/kb/969155 - On a Windows XP-based computer with Family Safety installed, you receive an error message: “The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll”

Recently tried to update iTunes 12.0.1 and got this error message: The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.

I recently tried to update iTunes to 12.0.1 and got this error message:
The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
After that, I get: iTunes did not install properly. Reinstall iTunes.
I tried downloading iTunes again (without uninstalling it) and it won't download.
Any suggestions?

Thanks so very much, I have been looking for an answer to this for
almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
I must have installed deleted everything in order at least 15 times
Is there anyways this cane get pinned to stay at top as it works and save people ploughing
through post after post which is just asking the same question.
Off to back up and I Cloud back up and see how it works without sidebar
again thank you

JMS Receiver error: Null pointer received from QueueConnectionFactory JNDI

Hello gurus,
I need integrate PI 7.1 with EMS Tibco.
I deployed the jar files:
tibrvjms.jar
tibjmsufo.jar
tibjmsapps.jar
tibjmsadmin.jar
tibjms.jar
tibemsd_sec.jar
slf4j-simple-1.4.2.jar
slf4j-api-1.4.2.jar
jms.jar
(and then restard the j2ee engine).
Hi,
I put the following parameters at the JMS Receiver Communication Channel in Integration Directory :
Transport Protocol : Access JMS Provider with JNDI
JNDI Lookup Name of QueueConnectionFactory : QueueConnectionFactory (and I try too with GenericConnectionFactory)
JNDI Lookup Name of jms queue : SAPToTibcoQueue
Name of JNDI initial context factory : com.tibco.tibjms.naming.TibjmsInitialContextFactory
JNDI server address : tibjmsnaming://172.18.xxx.xx:7222
In the RWB the JMS Channel is red with the following error message :
"Receiver channel. Details: Null pointer received from QueueConnectionFactory JNDI lookup."
Can someone help me?
Thanks in Advanced!!

HI,
Can you try these below options.
1) Can you please check whether you have deployed all the below jar files.
crimson.jar
jaxp.jar
jcert.jar
jms.jar
jndi.jar
jnet.jar
jsse.jar
jta-spec1_0_1.jar
tibcrypt.jar
tibjms.jar
tibjmsadmin.jar
tibjmsapps.jar
tibrvjms.jar
2) there is a service which is called either Classloader Viewer or Classpath Resolver on the server node in the J2EE Visual Admin. In that service you see a list of all deployed sdas, so you can check for jmsproviderlib. Then if you click on that to open, it should show you all the jar files that came in with the deployment.
JMS Configuration - Tibco JMS ?
Regards,
Raju

Error message : B2 050: Change pointer ID already exists

Hi Expert,
Now , in our one client, whenever the user save any change, the system will popup one screen " Express document "Update was terminated" received from author " XXXXXX "
The error message is " B2 050: Change pointer ID already exists "
Actually, this client was one copy of our production system , which copied each weekend , during this weekend, as the sever was reset, the batch job of copy is not finished.
Who could tell me the reason, and how to solve ?
Thanks and Regards
Shubin

Hi Ashok ,
Thanks a lot !
From SM13, I see : T-code MM02 , Me21N, ME22N ..., and status : " error "
From SM21, I see one of them like blow
                   07:16:05 UP1 015 310 SBTAN                 D0 1 Transaction Canceled B2 050 ( )
                   07:16:05 UP1 015 310 SBTAN                 R6 5 Update terminated
                   07:16:05 UP1 015 310 SBTAN                 R6 6 > Update key: 073686DE7A56F19EAA60001B7800807C
                   07:16:05 UP1 015 310 SBTAN                 R6 7 > Update module: MATERIAL_WRITE_DOCUMENT
Details :
                      Task...... Process                User...... Terminal Session TCode Program Cl Problem cl         Package
                      05052      V1 Update Task No. 015 SBTAN      BE071012       1       RSM13000 K SAP Web AS Problem SDYN
Document for log : Documentation for system log message D0 1 :
                     The transaction has been terminated. This may be caused by a
                     termination message from the application (MESSAGE Axxx) or by an
                     error detected by the SAP System due to which it makes no sense to
                     proceed with the transaction. The actual reason for the termination
                     is indicated by the T100 message and the parameters.
                      \Additional documentation for message B2                  050
                     Change pointer ID already exists.
                      No documentation exists for message B2050
BR, Shubin

I am trying to use the "This solved my question - 10 points" and the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

I am trying to use the "This solved my question - 10 points" an the "This helped me - 5 points" but they are NOT doing anything. How do I award the points ?

Are you talking about the "Legend" panel at the right of the window?
Those text are just help texts explaining the reputation points. You can only award points, if you are the original poster of a question. Then you will see active buttons to award points below the answers you receive. See here for more information: https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards
Léonie

What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.

My problem is on my Windows PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help?

I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?

Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

Message Receive question in Point to Point

Similar Messages

Maybe you are looking for