Message Store for OSB

Hi All,
I was going to the service patterns for ESB. For reliable messaging, it recommends a Message store pattern which is nothing but to store messages somewhere if the target service is down. How do one implement this pattern using Oracle Service Bus.
Thanks
Edited by: user5108636 on 5/12/2012 13:33

You can use weblogic Durable subscriber to achieve the Message store functionality if target system is down.
http://docs.oracle.com/cd/E13222_01/wls/docs81/jms/implement.html#1097632
http://www.xenta.nl/blog/2011/06/17/weblogic-topics-and-non-durable-subscribers/
try situation 2 in xenta's blog
Hope it helps !!
Regards,
Abhinav

Similar Messages

Message: "Waiting for App Store to download Mac OS X Server Add on"

Trying to install 10.7 (from 10.6.8) on Mac Mini server 4,1. I don't use it as a server, and don't know anything about that.I get a message "Waiting for App Store to download Mac OS X Server Add on" check download at App store. There is none. Help?
Mac Mini Server 4.1/2.66 GHz/Intel Core 2 Duo/8 GB Memory

Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
What a pain.
If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

Why am I getting a message that I need to log into the Canadian store for app updates and iTunes

Why am I getting a message that I need to log into the Canadian store for app updates and I tune purchases?

Should you be in the Canadian App Store? Is that your store? Of not - or of you need to see what store you are in.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

Message store manager for Exchange 2010

Is there any plan to get the Message store manager tool compatable with Exchange 2010? Even limited subscriber reporting would be nice.

Hi Jason,
To find out the info for Number of Messages etc. you can use the Connection
User data Dump from the great Unity Tools
http://www.ciscounitytools.com/Applications/CxN/UserDataDump/UserDataDump.html
and then to delete messages;
From Master Lindborg
"For Unity Connection (where we store messaged in our own database) you can use the Bulk USer Delete tool
(which includes a mailbox reset function that lets you optionally remove all messages for selected users if you like)"
http://www.ciscounitytools.com/Applications/CxN/BulkUserDelete/BulkUserDelete.html
Cheers!
Rob

I am trying to stream video from iTunes store for the last 2 days and all I get is the message "iTunes store is unavailable. Try again later." I have tried turning it off, restoring it, signing in and out again. Netflix works though.

I am trying to stream video from iTunes store for the last 2 days and all I get is the message "iTunes store is unavailable. Try again later." I have tried turning it off, unplugging all cords, restarting it, reseting it, restoring it, and signing in and out again. Netflix works, but iTunes seems to be bugging out. If anyone could help, it would be much appreciated. Thanks.

melaniefrommadisonville wrote:
I want to try to un-install iTunes then re-intstall but am a new mac user and don't know how to do this.
click here and follow the instructions.

Guarranteed Message Delivery with OSB 11g

Hi,
I'm currently working on a scenario with OSB that requires me to set up guaranteed message delivery. The business scenario is that on one end I have a flat file polling service and I have to transform this data into XML and store it to DB. Concisely, this is the scenario: Flat File -> Proxy -> Business -> JMS Queue -> Proxy -> Business -> DB. The entire process works fine till the time I turn the DB off. In that case, I get a load of erro in the log, and the message in the Queue sits there indefinitely, Even after the DB has been restarted. The only way the message gets stored into DB is by performing a complete server restart, which, needless to say is not acceptable. Stopping and starting the proxy and business services do not work, either.
I'm using an XA data source for the DB connection pool and the default XA Connection Factory for OSB JMS transport. After delivery failure the message sits in the queue with "receiving transaction" state string. On inspection of the server logs I found that WebLogic can't connect with the datasource even when the database is completely restarted. It requires a server restart for the connection pool to work properly again.
Could anybody please provide some insight as to what I'm doing wrong?

Jms:///CF/QName works when we OSB clusterOSB JMS transport is implemented as Weblogic MDB's under the hood. From weblogic 9x onwards , mdbs bind to co-hosted destinations by default.
So if you have a distributed destination and mdb's are deployed to the same cluster ( happens when jms proxy service is deployed to the cluster) , then it is guaranteed behaviour that the mdb on ms1 binds to dd member on ms1 and mdb on ms2 binds to dd member on ms2. So you will end up seeing 16 consumers ( by default, if you have not configured any work manager to restrict concurrent threads) on each of the dd member.
we have both BPEL and OSB cluster so when BPEL posting a message how to avoid the racing condition in OSB . as both will look for same QUEUE..Make sure the connection factory used by bpel has load balancing turned on and server affinity turned off. This will ensure a pretty load balanced distribution of the messages to the dd members in the cluster which will be then processed by the proxy service hosted on the same managed server instance.

Backing Up and Restoring the Message Store v.s. the queue

Hello,
We are running iPlanet 5.2 Messaging Server and need to migrate to another (duplicate) 5.2 Messaging Server. We have all the software installed and the LDAP user accounts created. Now we just need to move the existing mail from one server to the other.
I found the Backing Up and Restoring the Message Store section in the Admin Guide says to back up and restore your data, Messaging Server provides the imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? Can I just backup and restore the Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

Hello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim

TS1702 We use one ID for the Apps store for 2 iPhones. In the second profile on the Macit is impossible to update apps there is a mistake. What is the decision?

We use one ID for the Apps store for 2 iPhones. In the second profile on the Macit is impossible to update apps there is a mistake. What is the decision?

This happens when you both use the same Apple ID for iMessage. To fix this you have two choices:
On one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On both phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at". Also uncheck the other phone's phone number, if present.

Berkeley DB XML as Message Store

Hi,
I need to build a 'Message Store' (as referred to in 'Enterprise Integration Patterns: Designing, Building, and Deploying Messaging Solutions') for our SOA. Components of the SOA are coupled by JMS / sockets and send XML messages to each other. The central message store would consume all messages and so provide a message history and allow comparison of messages for support, performance measurement, troubleshooting, etc.
One approach which occured to me would be lightweight Java framework on top of Berkeley DB XML, which would handle connectivity to all integration points.
All of our messages are small (< 5K) but some types are high frequency (say 2K/s).
Can anyone comment on this approach pls or share experiences pls?
Many thanks!
Pete

The short answer is that you need to shut down the FastCGI Perl script before you copy the files over, and then re-start it once the file copy is complete. Basically, what's happening is that FastCGI Perl script has cached data in file-system backed shared memory. When you replace the underlying files via an file system copy "under the covers" so to speak, the in-memory and on-disk data becomes out of sync. Subsequent access to the repository can fail in many ways, a core dump is often going to be the result.
If you don't want to shut down the FastCGI Perl script during the copy, there are several other options that you could consider.
1) Copy the new files into a new/alternate directory location, stop/re-start the FastCGI Perl script when the copy is complete, pointing to the new location. That minimizes the "downtime" or,
2) Delete and insert documents one at a time through the API or,
3) Update documents one at a time through the API or,
4) Truncate the container and insert the documents.
Options 2, 3 & 4 will allow the FastCGI Perl script to keep on running, but will probably take more time and may result in larger database files.
Replication really won't help much if your goal is to completely replace the repository once every 24 hours. The same action would have to be applied to the master and replicated to the other repository locations. The same action of "replace everything" is still occurring.
I hope that this helps.
Regards,
Dave

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

Best practice for OSB to OSB communication

Cross posting this message:
I am currently in a project where we have two OSB that have to communicate. The OSBs are located in different security zones ("internal" and "secure"). All communication on a network level must be initiated from the secure zone to the internal zone. The message flow should be initated from the internal zone to the secure zone. Ideally we should establish a tcp connection from the secure zone to the internal zone, and then use SOAP over HTTP on this pre-established connection. Is this at all possible?
Our best approach now, is to establish a jms-queue in the internal zone and let both OSBs connect to this. All communication between the zone is then done over JMS. This is an approach that would work, but is it the only solution?
Can the t3/t3s protocol be used to achieve our goal? I.e. To have synchronous commincation over a pre-established connection (that is established the in opposite direction of the communication)?
Is there any other approach that might work?
What is considered best practice for sending messages from a OSB to another OSB in a more secure zone?
Edited by: hilmersen on 11.jun.2009 00:59

Hi,
In my experience in a live project, we have used secured communication (https) between internal service bus and DMZ/external service bus.
We also used two way SSL with customers.
The ports were also secured by firewall in between them.
If you wish more details, please email [email protected]
Ganapathi.V.Subramanian[VG]
Sydney, Australia
Edited by: Ganapathi.V.Subramanian[VG] on Aug 28, 2009 10:50 AM

Rejected Message Handlers in OSB

The official documentation of Oracle JCA adapters
http://docs.oracle.com/cd/E12839_01/integration.1111/e10231/life_cycle.htm#BABBHJEA
says that one can have a Web Service invoked whenever the JCA File Adapter rejects a message,
and this invokation would include the error details.
However, I have found examples only for a BPEL Error Handler, and not a WebService Error Handler.
I have tried providing a dynamic JCA activation property "rejectedMessageHandlers=wsif:// http:// pierrepc:7001/ errorhandler/ rejectionMessagePS? WSDL | handleRejection | message" , where myhandler is the URL of a Proxy Service based on a WSDL, but I keep getting the error
"Error while trying to hand off bad message to Rejection handler wsif : // http: // pierrepc:7001/ errorhandler / rejectionMessagePS?WSDL | handleRejection | message due to: Unable to find an available port"
The WSDL is:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<definitions name="RejectionMessage"
targetNamespace="http://xmlns.oracle.com/pcbpel/rejectionHandler"
xmlns:tns="http://xmlns.oracle.com/pcbpel/rejectionHandler"
xmlns:err="http://xmlns.oracle.com/pcbpel/errorHandling"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>

<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/errorHandling"
schemaLocation="JCAErrorHandling.xsd"/>
</schema>
</types>
<message name="RejectionMessage">
<part name="message" element="err:RejectedMessage"/>
</message>
<portType name="RejectionHandlerPortType">
<operation name="handleRejection">
<input message="tns:RejectionMessage"/>
</operation>
</portType>
<binding name="rejectedmessageSOAP" type="tns:RejectionHandlerPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="handleRejection">
<soap:operation soapAction="http://www.example.org/rejectedmessage/handleRejection"/>
<input>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="rejectedmessage">
<port binding="tns:rejectedmessageSOAP" name="rejectedmessageSOAP">
<soap:address location="http://www.example.org/"/>
</port>
</service>
</definitions>
and the XSD is
<?xml version="1.0" encoding="UTF-8"?>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://xmlns.oracle.com/pcbpel/errorHandling" xmlns:tns="http://xmlns.oracle.com/pcbpel/errorHandling" xmlns="http://www.w3.org/2001/XMLSchema">
<element name="FatalErrorMessage" type="tns:FatalErrorMessageType"/>
<complexType name="FatalErrorMessageType">
<sequence>
<element name="Originator" type="string"/>
<element name="Reason" type="string"/>
<element name="Exception" type="string"/>
<element name="StackTrace" type="string"/>
</sequence>
</complexType>
<element name="RejectedMessage" type="tns:RejectedMessageType"/>
<complexType name="RejectedMessageType">
<sequence>
<element name="MessageHeader" type="base64Binary"/>
<element name="MessagePayload" type="base64Binary"/>
<element name="RejectionReason" type="string"/>
<element name="AdditionalProperties" type="tns:AdditionalPropsType"/>
</sequence>
<attribute name="RejectionId" type="string"/>
<attribute name="BatchId" type="string"/>
<attribute name="BatchInfo" type="string"/>
<attribute name="PrimaryKey" type="string"/>
<attribute name="MessageOriginReference" type="string"/>
</complexType>
<complexType name="AdditionalPropsType">
<sequence>
<element name="RejectionProp" type="tns:RejectionPropType" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="RejectionPropType">
<simpleContent>
<extension base="string">
<attribute name="name" type="ID" use="required"/>
<attribute name="value" type="string" use="required"/>
</extension>
</simpleContent>
</complexType>
</schema>
Any clue?
I have invoked successfully the Proxy Service with the original WSIF libraries from Apache http://ws.apache.org/wsif/wsif_samples/index.html .... I don't see why the collaxa-third party library in the Oracle Adapter refuse to parse the WSDL...
thanks!
Edited by: Pierluigi Vernetto on 27-Jan-2012 04:22

Maybe this can help - http://www.javamonamour.org/2011/11/osb-and-rejectedmessagehandlers-in-jca.html

Exchange Server 2010 Move mailbox to database but display MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)

I have 2 exchange server "A" and "B". Server "A" have "Test1" database and Server "B" have "Test2" database. I tried move some mailboxes from "Test1" to "Test2"
but sometimes mailboxes cannot finished and display below error. I used Domain administrator to move mailboxes and grant "Manage full access permission" to these mailboxes but still failed. Finally, I clear the failed move request
and repeat the move mailboxes action several times.  Then, the move request completed without error. Have any suggestion? Please help. Thank you!
Mailbox move for 'xxx.com/xxx/xxx/xxx - Users/xxx/Peter' (331d5b4e-0bd1-428a-ae28-d97581ae0d7f) has failed.
Error code: -2147024891
MapiExceptionNoAccess: Unable to open message store. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
    Lid: 18969   EcDoRpcExt2 called [length=132]
    Lid: 27161   EcDoRpcExt2 returned [ec=0x80070005][length=202][latency=0]
    Lid: 32881   StoreEc: 0x80070005
    Lid: 50035
    Lid: 64625   StoreEc: 0x80070005
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropLogon [254]
    Lid: 56503
    Lid: 12716   StoreEc: 0x80070005
    Lid: 20794
    Lid: 28474   StoreEc: 0x80070005
    Lid: 22330   dwParam: 0x0        Msg: 14.03.0123.002:NHK-S08-MBD02
    Lid: 1750    ---- Remote Context End ----
    Lid: 23354   StoreEc: 0x80070005
    Lid: 25913
    Lid: 21817   ROP Failure: 0x80070005
    Lid: 26297
    Lid: 16585   StoreEc: 0x80070005
    Lid: 32441
    Lid: 1706    StoreEc: 0x80070005
    Lid: 24761
    Lid: 20665   StoreEc: 0x80070005
    Lid: 25785
    Lid: 29881   StoreEc: 0x80070005
Context:
Mailbox: Primary (331d5b4e-0bd1-428a-ae28-d97581ae0d7f)

Hi Gordon
This could happen if there is any mailbox which has occupied more space than its normal quota allocated.
As suggested by geo try to clean all the DB's first
You can probably run Get-Mailboxdatabase | Clean-Mailboxdatabase which will clean all of your DB's wait for some time until it gets completed
Also try running the command with the MRS server parameter switch and specify a CAS FQDN and see the results if it gets succeded
Get-Mailbox -Database 'DBNAME'| New-MoveRequest -TargetDatabase DBNAME -BatchName "BATCHNAME" -BadItemLimit 100 -AcceptLargeDataLoss -MRSserver CAS server FQDN Good Luck !!Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Error Message when Trying to Sync to MS Outlook 2010, "No Available Message Stores"

Hi,
I am trying to Sync My blackberry 8330 Phone with MS Outlook 2010 Beta.
I can not Sync to any part of MS Outlook (Calendar, E-Mail, etc) I always get the same error message "No available Message Stores". Does anyone know what is causing this or how to fix it.
Specs:
Windows 7 64 bit
MS Outlook 2010 Beta 32 bit
Default Profile
Blackberry OS V5.0
Latest BlackBerry Desktop Manager.
Thanks to anyone who can help.
-Scoobs
Solved!
Go to Solution.

Hi and welcome to the forums!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Take a look at this link: No available msg stores
Happy to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

ORA-00001: unique constraint during "Configure Database Security Store for OIM Domain"

Hi Guru's,
I am following the below steps for OIM 11.1.2.1 with SOA 11.1.1.7 Installation and facing below error during step "Configure Database Security Store for OIM Domain".
Installed Database 11.2.0.3
Installed RCU (Here I used two versions.
RCU 11.1.2 - Used IDAM prefix for (Metadata Services, OPSS, OIM)
RCU 11.1.1.7 - Used SOA prefix for(Metadata Services,SOA Infrastructure, User Messaging service)
Installed JDK 7 (Java 1.7)
Installed WL 10.3.6 (MW_HOME-/u01/Middleware/fmw, WL_HOME=/u01/Middleware/fmw/wlserver_10.3)
Installed FMW 11.1.2.1 for OIM. (ORACLE_HOME=Oracle_IDM1)
Installed FMW 11.1.1.7 for SOA (ORACLE_HOME=Oracle_SOA1)
WL Domain creation. (Domain Name – idam_domain1)
Configure Database Security Store for OIM Domain.
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (IDAM_OPSS.IDX_JPS_RDN_PDN) violated
Also followed the below bug solution, but issue still occurs.
Bug 16690836 : CONFIGURE DATABASE SECURITY STORE (CONFIGURESECURITYSTORE.PY) SCRIPT IS FAILING
@ 1. Delete the Schemas using RCU.
@ 2. Recreate the OAM schemas.
@ 3. Reinstall the WLS and OAM software.
@ 4. Run config.sh to create a new domain.
@ 5. Run setDomainEnv.sh from user_projects/domains/<Domain_name>/bin
@ 6. Run the configureSecurityStore.py from same window.
Not sure if anyone tried with different steps that fixed the issue? Could you please help.
Thanks
VG

Hi Gurus, I got the solution from Oracle. SOA 11.1.1.7.0 shouldn't be used with Identity Management 11.1.2.1.0(11GR1-PS1) version. Identity Management 11.1.2.1.0(11GR1-PS1) is bundled with SOA 11.1.1.6.0. When used this SOA version, Installation went smooth. Thanks VG

Message Store for OSB

Similar Messages

Maybe you are looking for