MessageHeader XSD is not getting imported

Hello,
In my scenario, i have a webservice in which its refering to MessageHeader in External Refereneces.
So, imported the XSD from
http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd
Internally, its referring other XSDs as well.
1. http://www.w3.org/TR/xmldsig-core/xmldsig-core-schema.xsd
2. http://www.oasis-open.org/committees/ebxml-msg/schema/xlink.xsd
3. http://www.oasis-open.org/committees/ebxml-msg/schema/envelope.xsd
4. http://www.w3.org/2001/03/xml.xsd
So i uploaded all the XSD's and imported for External References...
But while importing 1 & 4, am getting the following error message
Unable to convert imported document to WSDL
Reason:
Error when loading XML document (Connection timed out: connect)Check the selected category
Unable to convert imported document to WSDL
Reason: Error when parsing the XML document (External entity -//W3C//DTD XMLSCHEMA 200102//EN from address XMLSchema.dtd in XML document is not supported)
Check the selected category
Because of this am not able to get Header messsage.
Let me know if you have any solution
Regards,
sreeni

For technical reasons, proxy generation and the respective editors in the Integration Builder do not support the entire language range of XML schema and WSDL.
For an overview of which language elements are supported, see [http://help.sap.com/saphelp_nw04/helpdata/en/43/ce993b45cb0a85e10000000a1553f6/frameset.htm]

Similar Messages

GRAC_ROLE_MASS_IMPRT : roles not getting imported

Hi Friends,
I am working on GRC AC migration from AC 5.3 to 10.1
Currently I am importing the Data from backend systems.
While performing intra-migration tasks before RAR data import, I am stuck at below step :
Importing roles for defined connectors : GRAC_ROLE_MASS_IMPRT
My roles are not getting imported from backend systems. I have tested the connection and it is working properly.
Profile, role and authorization sync also has been done successfully.
I am looking forward for help from you expert people.
Thanks in advance,
Achala.

Hi,
I am able to import few roles. When I try to import say 'XC:*' roles, I can see only around 500 roles in the output log where there are around 7000 "XC:*"roles present in the system.
Secondly, when I try to enter multiple roles in the role tab, the import gets executed only for first role and not for remaining once. Please find attached file of screenshots.
Please advise if there is any limit for number of roles imported at a time via GRAC_ROLE_MASS_IMPRT.
Please also adivse if any workaround available.

Stats Not getting imported while importing partition using DATAPUMP API

Hi,
I am using datapump API for exporting a partition of a table and the importing the partition into table on another DB.
The data is getting imported but i could the partition stats are not getting imported. I am using TABLE_EXISTS_ACTION = APPEND.
any idea on how to achieve the stats also to be imported into the partition.
Thanks!

Hi,
I am using datapump API for exporting a partition of a table and the importing the partition into table on another DB.
The data is getting imported but i could the partition stats are not getting imported. I am using TABLE_EXISTS_ACTION = APPEND.
any idea on how to achieve the stats also to be imported into the partition.
Thanks!

Importing package from ecc5.0 to 4.6c - gui not getting imported????

Hi,
We are importing package from ecc5.0 to 4.6c, but gui is not getting imported. Please advice.....
Thanks for your help in advance.
Thanks,
Sheel

Hi Sheel,
Have you looked through SAP Note 330367 and what is the error you are getting? Are you going from a unicode box to a non-unicode box (SAP Note 638357 discusses the requirements for this)?
Generally, you can move everything from the ECC 5.0 box to the 4.6 box except for some CUA interfaces (you might see an error concerning EUDB table entries on the transport log). First you will want to update the transport programs (including tp) and then make any needed changes for going from UC to NUC. Finally you will bring in the transports and transfer the CUA screens using a program called from SE38 (detailed in SAP Note 327565).
Hope that helps!
J. Haynes

SAP XI HR patch XI7_0_SAP_HR_6.00_83_00.tpz not getting imported

SAP XI HR patch XI7_0_SAP_HR_6.00_83_00.tpz not getting imported
Hi Team,
We are trying to import this patch to SAP XI in IR, but this is
not getting imported. Everytime it is getting errored out or running for more
than 7 hours and still not completing.
This patch is per below note:
1969094 - PY-GB: Earlier Year Update Report Changes 2013/2014The .TPZ file was downloaded from below from SAP Market place.
The .TPZ file was downloaded from below from SAP Market place.
GO to SAP Service
Marketplace:
http://service.sap.com/sp-stacks
Then follow the path given below
-> Support Packages and Patches
=> A - Z Index
o Click on index "E"
-> Click on "ESR Content (XI Content)"
XI content for SAP HR are available for 600 and 604 releases seperately.
FOR SAP HR 600
=> XI CONTENT HR
o XI CONTENT HR 600
=> #Database independent
o DOWNLOAD: SP83 XI Content SAP HR 600To track the progress of the import we
have also enabled the trace. Below is the trace log:
To track the progress of the import we have also enabled the
trace. Below is the trace log:
#135 13:07:29 [AWT-EventQueue-0] DEBUG
com.sap.aii.ib.clsif.login.LoginService: Found cached remote interface
LoginServiceBean
Feb 28, 2014 1:07:30 PM [1393592850003]:Info : Thread[AWT-EventQueue-0,6,m...
com.sap.engine.services.rmi_p4: com.sap.engine.services.rmi_p4.Call.sendRequest
MSG: com.sap.aii.ib.sbeans.login.LoginServiceRemote_Stub@d61efd:
Calling remote method: getSystemMessages(com.sap.guid.IGUID) call id: 49
connection: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null] server id: 8005050
Feb 28, 2014 1:07:30 PM [1393592850019]:Path : Thread[AWT-EventQueue-0,6,m...
com.sap.engine.services.rmi_p4.Connection.reply: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null]: sending message with size 410 bytes to
server 8005050
Feb 28, 2014 1:07:30 PM [1393592850019]:Path : Thread[Thread-23,6,main]
com.sap.engine.services.rmi_p4: com.sap.engine.services.rmi_p4.Parser.newRequest
MSG: Received message type: REPLY call id: 49 size:197 received from: com.sap.engine.services.rmi_p4.Connection@1150389
: None:192.168.29.48:50004 [null]
Please help on this urgently to find out the root cause and import the patch successfully.
Many thanks.
Binod Kumar

Hi Binod,
you can configure the java heap size in PI exchange profile. change the max heap size (to 1024 or check with basis)
com.sap.aii.ib.client.jnlp.j2se.maxheapsize = 1024m
refer the below wiki question 19
QA for PI - One stop for all (Part - 1) - Netweaver Technology - SCN Wiki
regards,
Harish

HT1688 Not getting important emails to my yahoo email account

I'm not getting important emails from my job to my yahoo email account

And what does this have to do with the iPhone?
Check the Yahoo account on a computer, are the emails there? If not... contact Yahoo and the email admin at work to address the issue.

App-v OSD's not getting imported to SCCM 2012

Hi
Currently i am migrating APP-V 4.6 PACKAGES to SCCM 2012, as part of this process few OSD's of applications are not getting imported.
ex:- if application has 10 OSD then only 5 OSD are getting imported.
Since App-v 4.6 was earlier standalone all the OSD were published to different user using different AD groups,
Do the package has to be edited again to import all OSD or manifest files has to be changed to include all OSD to get imported to SCCM 2012.
Thanks

Open up the app in the sequencer, add the file to your scripts folder. If the script requires to be run elevated, you'll want to use the Deployment config file and use Global publishing....
If you don't need elevation you can use the User Config and won't need to publish globally.
Fore more info and some examples, check this out:
http://blogs.technet.com/b/appv/archive/2012/12/10/scripting-and-embedded-scripting-for-appv-5-0-dynamic-deployment-and-user-configuration-scripting.aspx
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

PMD Custom ruleset file is not getting imported in Eclipse Luna

I am using Eclipse Luna 4.4.0 and trying to import the custom PMD ruleset in Eclipse but I see the OK button being disabled.
I read it on some post which says it may be because of PMD ruleset being from old version of PMD.
However, I modified it to match PMD 5.0 but still I see the same issue i.e. OK button is not getting enabled.
I am attaching the PMD ruleset file.
can someone suggest what needs to be done to fix the issue ?
Saurabh

Hi Kali
Before doing translations have you set these 2 profile options at site level
Fnd Xliff Export Root Path / FND_XLIFF_EXPORT_ROOT_PATH
You will set this root path to generate the full path where the XLIFF files are exported when you extract your translated personalization’s using the Extract Translation Files page in OA Personalization Framework. T
Fnd Xliff Import Root Path / FND_XLIFF_IMPORT_ROOT_PATH
Use this profile option to set the root path used to derive the full path from where the Xliff files are uploaded when you use the Upload Translations page in OA Personalization Framework to upload translated personalizations
Please go through this page .If it helps
http://apps2fusion.com/at/46-an/240-translating-personalizations-stored-in-mds
Thanks
AJ

Records are not getting imported due to new line charactor in the field

Dear All,
I am trying to load a file into target but the import is failing. The error thrown is as below;
During the import of leads into CRMoD through loading the New lead/Step lead file received from CA, leads have not been imported and we encountered the following
error message:
"Import field 'LAST_NAME' had a blank value for the required Oracle CRM On Demand field 'Last Name'. This record was not imported. Please enter desired values for
the required fields and re-import this record."
Reason:
Leads are not imported due to an additional new line (Enter) character, which results in the subsequent lines not being picked up and the error of import failure.
Please help me to resolve this to remove the new line charactor in the field so that import succeeds..
By the way, I am working on ODI 11g.
Thanks in Advance
Regards
Santy

While i was reading your post i remembered an issue that madded me. I don't know Oracle CRM, but a possible workaround could be to create a temporary Oracle table and load all data inside it. After that load in CRM only valid rows.

IDoc meta data not getting imported

Hello
I am trying to get IDoc meta-data using transaction IDX2. I have configued RFC destinations of type R3 in both the systems (ECC and XI). Also I have created port using transaction IDX1.
When tried to import MATMAS04 using the defined port it gives Information box displaying "I::000" and nothing happens. The information box does'nt contain any message.
Anybody faced this problem with IDoc?
Thanks in advance.
Regards
Rajeev

Hi,
actually it was authorization problem which I noticed when I checked the short dump in ECC.
anyways thanks for the reply.
Regards
Rajeev

Data source not getting imported

Hi,
Triggering following error when I am try to import the DS '/IRM/LIS_RM_IPCRITM' from BW development to quality.I have replicated the data source in qty and imported once again
Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS ( )
Name /IRM/CALIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
Name /IRM/CCLIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
Errors occurred during post-handling RS_AFTER_IMPORT for
The errors affect the following components:
BW-WHM-MTD (Metadata (Repository))
Please help me in fixing the issue
Thanks,
Sarasu

Hi Pani,
I already tried using the program,same error with program also
@5B\QInformation@    Activation of Objects with Type DataSource
@5B\QInformation@    Checking Objects with Type DataSource
@5B\QInformation@    Checking DataSource /IRM/LIS_RM_IPCRITM EQ1CLNT300
@5D\QWarning@    Changes to Field ZZKSTBWNT ( Position 126 ) are not compatible with database
@5B\QInformation@    Saving Objects with Type DataSource
@5B\QInformation@    Saving DataSource /IRM/LIS_RM_IPCRITM           EQ1CLNT300
@5C\QError@    Name /IRM/CALIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
@5C\QError@    Name /IRM/CCLIS_RM_000020000001 is not in the namespace for generated BW Metaobjects
@5C\QError@    Error saving DataSource /IRM/LIS_RM_IPCRITM           EQ1CLNT300
@5C\QError@    DataSource /IRM/LIS_RM_IPCRITM (EQ1CLNT300) could not be activated

When validating XML against XSD DateTime not getting recognised

In the XSD the element is defined as
<xs:element name="CreateDate" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="CreateUser" type="xs:string" nillable="true" minOccurs="0"/>
<xs:element name="ModifyDate" type="xs:dateTime" nillable="true" minOccurs="0"/>
in the XML
<CreateDate>1995-04-19 14:37:43</CreateDate>
<CreateUser>JDC</CreateUser>
<ModifyDate>2010-09-21 14:37:43</ModifyDate>
When i validate it
its throwing me error.
ORA-30992 error occured at xpath
ORA-01861 leteral does not match format string.
But when i remove the Time part then it is not throwing error.
<CreateDate>1995-04-19</CreateDate>
<CreateUser>JDC</CreateUser>
<ModifyDate>2010-09-21</ModifyDate>
Help me out.

Your date/time value is formatted incorrectly.
See http://www.w3.org/TR/xmlschema-2/#dateTime
The ·lexical space· of dateTime consists of finite-length sequences of characters of the form: '-'? yyyy '-' mm '-' dd 'T' hh ':' mm ':' ss ('.' s+)? (zzzzzz)?, whereSo you are missing the T between the date and time.
I will agree that the error message is not too helpful. How are you validating it and what version of Oracle (4 digits)?

Webcenter Application Roles not getting imported in UCM on Migration

Hi All,
I migrated the webcenter resources (Service Data, Customizations and security policies) and UCM content (Using configuration utility, Archiver and Folder Archive components). After migration I am able to see the application roles in the destination webcenter spaces instance by navigating to Webcenter Spaces -> Security -> Application Roles, but I am not able to see the corresponding accounts created in the UCM for that particular user.
For Ex: I have a application role: s1a472022_f8bb_48e1_a519_15841780df72#-#Moderator in Webcenter Spaces for user ABC
In UCM I am not able to see the account AUTHEN/s1a472022f8bb48e1a51915841780df72 for the user ABC.
I verified in the source UCM instance and I am able to see the accounts in that instance.
Please help me out. Let me know if extra details required.
Thanks,
Sachin

Hi Srinath,
Yes, I have migrated data from UCM1 to UCM2 using insert script. But, I think there should be some other way also. There may be some options to check while creating export archive. We can migrate UCM schema tables also while migrating the content but I was not able to find USEREXTENDEDATTRIBUTES table. There are some other options like export additional user config, I need to check those options also.
Thanks,
Sachin

Not getting all the layers while converting/exporting from ai to psd

cant fix..need help

Can you please paste the snapshot from the Layers panel from AI (the Layers which are not getting imported).
Regards,
Raghuveer

Free Goods are not getting exploded in to Sales Return Order

Dear All
I have created one order in which I am giving 13:1 (inclusive) free goods using VBN1.
Order Qty               Converted to             Item Category
288 (13:1)              266 (With Price)      ZTAN
                               22 (Free)               ZTNN
I am having no problem upto Invoice. But while making return sales order with ref. to the invoice, it's throwing a message 'The system didn't find a valid bill of material' and free qty of 22 pcs are not getting imported into the return order.
Please help

Hi
Returns Orders has document category H where the free goods are not supported may be because of this it is not get imported.See details below.
http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm
Regards
Ramesh

MessageHeader XSD is not getting imported

Similar Messages

Maybe you are looking for