Messages are blocked in XI QUEUES

hi experts
my scenario flow is r/3 ---> Xi -
> again same R/3
data is going to XI automatically and in also from XI inbound QUeue
but the problem is that it is showing Green flag
if we relase the msgs maually from the queues then it showing Single black arrow in place of green flag
if release from here by doing the same thing in queues then it going the R/3 and doing further in R/3
so i want to know why the messages are getting blocked in queues
plz help me its urgent
points should be rewarded
thanks
sreeni

Hi
Please refer the below weblog.
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Also this thread
Message and queue
Check this sravyas blogs with some simple examples:
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Also check this:
/people/riyaz.sayyad/blog/2006/04/23/introduction-to-context-handling-in-message-mapping
Queues for Prioritized Message Processing:
http://help.sap.com/saphelp_nw04s/helpdata/en/04/827440c36ed562e10000000a155106/frameset.htm
Configuring Queue Assignment for Inbound Processing:
http://help.sap.com/saphelp_nw04s/helpdata/en/45/1a97be109921a0e10000000a1553f6/frameset.htm
1) http://www.erpgenie.com/sap/netweaver/xi/howto.htm
in the above link look for
How to Prioritize Exchange Infrastructure (XI) Messages on the Integration Server
2) http://help.sap.com/saphelp_nw04/helpdata/en/04/827440c36ed562e10000000a155106/frameset.htm
3) Re: AE and IE /Que
4) http://www.sapag.co.in/sapbasis.htm
Thanks!!

Similar Messages

How can you tell if messages are blocked with ios7

how can i tell if imessages are blocked with ios7 and can it block facebook im?

Selected guides should become light blue when they're selected. My guides are using the default color of cyan and the guide on the right is selected in the image below.
If you have your guides set to the light blue selection inside the Guides Color drop down menu then you won't see a difference because that specific light blue is the color the guide changes to when it's selected. You can also click on the swatch in the Guides and Grids preferences to select any color you want from a color picker.

Proxy messages are stucked in SMQ2 as scheduled status

Hi,
I am doing File(FCC) >PI 7.0>ABAP proxy. (ECC) Scenario.
Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are getting stucked in queues (SMQ2) in ECC. My message is not having much data , it is very less in size.
And there is no messages in Queue.
I register all queues in SMQR in PI and ECC.
Does I need to do any activity in ECC or PI? What could be a problem. Please suggest .
Thanks
Ayub

Hi Venkata,
Thanks for very quick replay.
Are the messages stuck with any error?--> First I can see the Green Color Flag as scheduled status, I open the message I can see there is no error message.Bt when I have look at end of the message in SXMB_MONI at Q.Status , I can see Message Has error
In SMQ2 -->
Cl. Queue Name               Entries    Status   Date 1     Time 1   NxtDate           NxtTim                  Sender ID                        Wait for queue
200 XBTR0009                         1 SYSFAIL 24.02.2012 10:53:34 24.02.2012 10:53:34      R3DEVQA_RDV_01
And when I double click the XBTR009 I can see the below message :
Cl.       User                  Function Module                 Queue Name                Date        Time                       StatusText
200 ALEREMOTE    SXMS_ASYNC_EXEC                 XBTR0009                  24.02.2012 10:53:34 Screen output without connection to user.
This are status of the messages. Please help me.
Regards,
Ahmed

Message stuck in Adapter Engine queue with status "Delivering"

Hi All,
I have a File to File EOIO scenario. The messages are sucessfully delivered from IE to AE. All entries have a chequered flag in SXMB_MONI. No messages are stuck in IE queue (SMQ2). But the message is stuck in AE queue with status "Delivering". I can not resend or cancel the message coz the status is "delivering".
The reason it is in "delivering" status is due to some config error that I made in Communication Channel FTP parameters. Now it is corrected. But how do I deal with this message now?
Restart of server is not an option here. Is there are place I can delete the message from AE queue?
Thanks
Jaishankar

You can see the queues status (and number of stuck entries etc) through the link:
http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp
There, you can maintain the queues.
There is also a link for the EOIO Sequence Monitor:
http://<host>:<port>/MessagingSystem/monitor/sequenceMonitor.jsp
There you can see the stuck messages and maintain these.
Make sure to handle the proper message IDs.
All of these are acessible through the Messaging System main page:
http://<host>:<port>/MessagingSystem/
Regards,
Henrique.

My outbound messages are not processing in XI

Hi All,
When i try to test my scenario i.e sending message from SRM to MDM , all my messages are struck in the Queue in XI. Even i deleted queues in SMQ2 , my messages are not processing and in sceduled for outbound processing stage. Even i restard also its on pending status. Please help me How to process my messages which is pending in XI.
Thanks in advance
Regards,
KK

Hi..
go to sxmb_moni->monitor processed messages
select ur message.. scroll towards right..
click on ur message queue ID.
check if there is any errored out message in that queue.
if yes .. delete that message,
and release the queue by unlocking that.
Regards
Pushkar

SMQ2 queue is blocked and messages are in u201Cwaitingu201D status in RWB

Hello,
A SMQ2 queue is blocked with XXX data and these messages are in u201Cwaitingu201D state in RWB.
What could be the reason?
Im sure its not because of the space because all the messages which flow after that was there in the directory.
Regards,
Mathangi

Hi Mathangi,
double click on the queue and click on the first message which will direct to MONI
--> check what exactly the error is and try to resolve the error accordingly
if you are unable to do that
Right click on the first message and save LUV it will be saved in SMQ3
then unlock the queue and execute again it will process successfully..
later you can process the message which is saved
Regards,
Naveen

[Urgent] Queues are blocked in status SYSFAIL

Hi experts,
I have the following problem that arose unexpectedly in an XI 3.0 installation:
Queues are blocked in SYSFAIL status and when I click on one entry, I get message: XI Error CLIENT_RECEIVE_FAILED.INTERNAL: Queue stopped
It seems to me that J2EE stack cannot connect to ABAP stack.
When I test INTEGRATION_DIRECTORY_HMI connection in sm59, I get no reply..
I cannot logon to Visual Administrator. It stops at 99%.
Hardly can I connect to Integration Builder.
Any ideas.
I need your help ASAP.
Evaggelos

Hi Evaggelos,
>I cannot logon to Visual Administrator. It stops at 99%.
Is your XI installation over?
We had a similar problem in one of my earlier projects. We restarted the server and everything started working fine.
If it is possible you can try the same.
Regards,
Sumit

Queues are blocked in PI

Queues are blocked in PI,I am unable to release it from SMQ2.Can you please tell me what other methods can I follow to release them.Can I delete them?is it ok
Thanks

Hi there,
what is the error message showing there..
if open the queues you can c message there..
act according to that..
If in production system it is not a good idea to delete the queues.
Regards
Rao

How do I get Firefox to display the information bar when a pop up is blocked I accidentally clicked on "Don't show this message when pop-ups are blocked" when a pop up was blocked. How do I get this message to reappear again when a pop up is blocked?

I just updated Firefox but can't get it to display the message when a pop-up is blocked. Most times I want them blocked but sometimes I need them enabled.

You can see a pop-up block icon in the right corner of the Status Bar if you have chosen to hide the information bar at the top.
You can left-click that pop-up block icon on the Status Bar and remove the check mark from "Don't show info message when pop-ups are blocked"
You can look at these prefs on the '''about:config''' page and reset them via the right-click context menu:
Status bar icon: browser.popups.showPopupBlocker
Info bar at the top: privacy.popups.showBrowserMessage
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

Proxy messages are stucked in SMQ2.Can I pass these msgs in separate queue?

Hi Guys,
File >PI>ABAP proxy. (ECC)
Once i pick and process the file, the resultant message is updating the table in ECC through ABAP proxy. These messages are high priority and they should not stuck in the queues in ECC.
The problem is some of the messages of this interface are getting stucked in queues (SMQ2) by colliding with other low priority messages which are failed due to some data issues.
Is there any way I can separate these high priority messages into separate custom queue and process them?
Do I need to this in ECC or PI?
Thanks
Deepthi

Hi,
As Debashis has already said, use message prioritization in PI to handle your requirement.
For SAP NetWeaver PI 7.0, navigate to SAP NetWeaver 7.0  SAP NetWeaver 7.0 Library  SAP NetWeaver Library  SAP NetWeaver by Key Capability  Process Integration by Key Capability  SAP NetWeaver Exchange Infrastructure  Runtime  Integration Engine  Prioritized Message Processing.
For SAP NetWeaver PI 7.1 (including EHP 1), navigate to SAP NetWeaver  SAP NetWeaver PI/Mobile/IdM 7.1  SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1  SAP NetWeaver Process Integration Library  Function-Oriented View  Process Integration  Integration Engine  Prioritized Message Processing.
For more details about message prioritization within the Advanced Adapter Engine, please refer to SAP Help Portal http://help.sap.com, and navigate to SAP NetWeaver  SAP NetWeaver PI/Mobile/IdM 7.1  SAP NetWeaver Process Integration 7.1 Including Enhancement Package 1  SAP NetWeaver Process Integration Library  Function-Oriented View  Process Integration  Process Integration Monitoring  Component Monitoring  Prioritizing the Processing of Messages.

Manage Queues - Messages are in Schedule status after upgrade to ERP2004

Hi,
We upgraded SAP to version ERP2004. ABAP proxy XI messages are in schedule status even though we deregister and register & activated all queues.
When I click on the queues it is in running status.
Does anyone has any idea where should I look?
Thanks in advance!
Mrudula

Hi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish

Messages are not moving to Error Queue in OSB if Error is Raised

Hi All,
My OSB process is as below.
Queue1-->OSB-->Queue2.
OSB Proxy is listening to the Queue1.When messages comes to Queue1 Proxy will pick the message and after applying the business logic it will put the message to Queue2.
If OSB is not able to deliver the message succesfully to Queue2 then it should retry for 2 times.If retry exhausted then the message should move to the error Queue.
I have configured Queue 1 with delivery failure paramaters redelivery limit and redelivery delay.Also the Connection factory is XA enabled.Even if any error happens (i am not using reply activity in the error handler) its retrying infinitely and messages are not coming to the error Queue.If i use reply activity its not retrying its failing at first time and the message is moved out of the main Queue1.
Can any one please help me on this?
Thanks.
Edited by: 892479 on Dec 21, 2011 6:31 AM

Since the messages are getting retried, it means that messages are getting rolled back to Queue1 when any errors happen. So transactional behavior is configured correctly.
Now the problem yu face is that the messages are not moving to error queue.
Make sure that you have configured following in the delivery failure tab of the queue>
Redelivery Delay Override - delay in miliseconds between retries
Redelivery Limit - number of retries
Expiration Policy - Redirect
Error Destination - Choose the error queue here
After that make sure that the Server is restarted, even though a server restart sign is not mentioned on the config page, some of these settings might not take effect without a restart.

Inbound Messages are struck in Queue.-Production environment of client box.

Dear All,
We have scheduled a Job(RSQIWKEX) to process messages in Inbound Queue. we are facing probem after restarting the XI server that the messages are struck in Queue and scheduled job also not getting executed. Even manually also not able to process the messages.
Could anyone help as how to proceed or what could be the cause of this problem.
Regards,
Siva

What is the error message?

Cases where messages are not being consumed from a queue

MQ 4.0
I have a cluster of 3 brokers. Java clients use RANDOMIZE to connect to the cluster of brokers. Message selectors are not used. My consumers are all synchronous, and connection.start() is called prior to calling MessageConsumer.receive().
What I have seen on random occassions are messages not being consumed from the queue. The problem seems to be sporadic.
I was thinking that the reason it is sporadic is because of the RANDOMIZE configuration of the client connetion / object-store.
That is, there is a possibility for the following to happen:
1) There were messages produced on a queue on broker A, but before these messages were consumed, all the consumers have been shutdown. Thus, the messages on queue stayed on broker A .... and have not been copied / clustered to the other brokers in the cluster ( As per online documentation, a queue is "copied" to other brokers only when there is a consumer for that queue on the other brokers ).
2) Then the client applications started up produced and consumers again. This time, the producers were all connected to broker B, and all consumers for the queue were also connected to broker B.
3) Because there are no other consumers for the queue on the other brokers, the messages in the queue on broker A are never consumed.
Can someone confirm that this is a possibility ?

Well ... it does seem to be the case.
I changed the object-store so that instead of using RANDOMIZE for imqAddressListBehavior, it uses PRIORITY. Therefore, all clients ( producers and consumers ) will connect to only 1 broker out of the 3 in the cluster.
After restarting all JMS clients with the new imqAddressListBehavior, there were messages in various queues in the other brokers that were not being consumed, because there are no longer any consumers on any of the other brokers.
All the messages in that broker that all JMS clients connect to are being consumed ...
Except for about 6 messages that stays in the queue for whatever reason. All consumers receiving with receive( 10000 ), and after consuming all messages above the 6, it returns without any more messages in the queue.
Well ... so much for cluster of brokers. I'll have to think of an alternative.

Why old message are still in the mail queue

Hi all,
I would like to know why old messages are still in the ims-ms queue and not deliver to recipient?
qm.maint> summ
Messages
Channel Queued Size (Kb) Oldest
tcp_local 0 0.00
tcp_intranet 0 0.00
tcp_auth 0 0.00
reprocess 0 0.00
process 0 0.00
pmxchannel 176 50912.86 4 Dec, 10:06:04
native 0 0.00
ims-ms 93 83309.79 3 Dec, 11:25:04
defragment 0 0.00
Totals 269 134222.65
I went to message location and saw the "ZZf0M2s0h2Xp1.HELD" message in /opt/SUNWmsgsr/queue/ims-ms/000
what does this mean "HELD" messages?
Anyone can explain in this? thanks.

Yap wrote:
I would like to know why old messages are still in the ims-ms queue and not deliver to recipient? As always, what version of messaging server are you running (./imsimta version)?
qm.maint> summ
Messages
Channel Queued Size (Kb) Oldest
ims-ms 93 83309.79 3 Dec, 11:25:04
If you run the following command, are the emails all destined to the same user?
./imsimta qm
dir -env ims-msAlso have you experience a core dump/process crash recently (do you have coreadm enabled)?
I went to message location and saw the "ZZf0M2s0h2Xp1.HELD" message in /opt/SUNWmsgsr/queue/ims-ms/000
what does this mean "HELD" messages? Refer here:
http://docs.sun.com/app/docs/doc/819-4428/bgbhg?a=view
Regards,
Shane.
Anyone can explain in this? thanks.

Messages are blocked in XI QUEUES

Similar Messages

Maybe you are looking for