Messages on the N96

i often send messages on to other people that i receive and have created a group for these people.
Sometimes when i receive a message and forward it it changes from a text message to a multimedia message automatically.
if i manually put in the people to send the message to it stays as a text message - any idea what could be causing this?
Solved!
Go to Solution.

forget this - it seems that you can only do 20 recipients before it changes to mms - strange...

Similar Messages

Problem when trying to transfer messages using the...

Hey all.
I rang Nokia Support today, but they didn't seem to understand the issue that I was having, so I've decided to post it here.
I reesently sent my N95 away to be repaired, because it had a broken speaker. I got it back on monday, and decided that I would try and transfer the messages from my old N73 to the N96. I launched the Switch application on the N95, and turned Bluetooth on on the N73. I selected the messages option from the list, and hit the ok option. After fetching about 250 messages, I noticed that the status line on the screen wasn't updating, so I figured that for some unknown reason the message transfer had crashed. I hit the stop option on the N95, and got a message stating that the connection had been broken. I checked in the inbox of the N95, and saw that some of the messages were there. I attempted to transfer the itoms again, and this time the connection held. However, upon recieving all of the messages from the N73, the N95 informed me that It was sending messages to the N73! I figured that this must be because it was sincrinising the messages that it had first attempted to fetch (the first time, when the connection broke). When it had finished, I checked in the inbox of both phones. The N95 had the correct number of messages, and so, surprisingly did the N73.
So my question: does anyone know what would have happened to the messages that the N95 attempted to fetch first (the time the Bluetooth connection broke half way through), and the messages that the N95 had transfered to the N73?
I am assuming that may be after transfering both of the phones look through the messages, and if it finds any messages with the same timestap it just overwrites them. If someone knows the answer to this question, please let me know.
Sorry for the long post, and I hope everyone understands my question!
Thanks a lot in advance,
Elliott.

Never had a transfer crash on me before. Apart from using switch to transfer, I also use it to sync my phones and that also involves the messges being transferred back and forth except I do it fairly regularly and I have yet ended up with any duplication. Hence, your theory about the phone checking checking for dupliction is probably correct.

Message Alert Tones N96

Is it possible to change message alerts on the N96 so that different contacts have different tones? So I know if its the girlfriend of the ex-wife. Thanks.
Solved!
Go to Solution.

1. You can edit your own post, that way you don´t need to post again. On the top corner of your post it says "options" there choose "edit" to edit your post.
2. I don´t think it is possible to assign different message tones for different people...
Then it looks like this:
Message Edited by illinjah on 23-Nov-2008 07:44 PM
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

How to delete the messages in the purges folder?

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
Search-Mailbox dave -searchdumpsteronly
-deletecontent
so my question is how to delete the messages in the purges folder with some script or retention policy?
Please click the Mark as Answer button if a post solves your problem!

Thank you all,
As the mailbox is enabled single item recovery.
I just want to make the items neither in deletion folder, nor in purges folder.
So I think there are two ways to achieve this.
Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable single item recovery .
So I want to use the Method 2
Please click the Mark as Answer button if a post solves your problem!

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to che

I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
This happens a lot regardless of the web page. I continually have to restart FF and it persists still

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Why can I send email from my iPad, but my iMac which is connected to the same modem keeps telling me that it can't send the message using the same server?

I have an iPad 2, connecting via Wifi to an Actiontec Q1000 modem. The iMac (3.06 GHz Intel Core 2 Duo, 4 GB 1067 MHz RAM, running OS 10.8.2) is also hard wired to the same modem. Internet access is via CenturyLink. Main email is from Shaw cable in Calgary (Phoenix is a vacation property), not through CenturyLink.
Can receive email on the iMac, but every time I try to send, I get a pop up saying "Cannot send message using the server .......". Further prompts me to verify the address in the email, and SMTP settings in Mail preferences, or to select a different outgoing mail server. I've tried using a number of servers, always the same result.
Using same settings in both devices.

Mail is not my forte, but what I noticed was that you have Centurylink and presumably have your Mail set up with their settings? But then you mention Shaw/vacation property/etc - you can send out email only through the server that you have set up as an account using the ISP you are using. If you switch places, do you have separate accounts set up with both Centurylink and Shaw so you can switch and use whichever one you're at? A Phoenix ISP won't work with a Mail POP account unless you're in your home - Phoenix - area.
Do you have a data plan with your iPad? That would explain why that works - it'll function sort of like a cellphone - works anywhere where there are signals.

"cannot send email message using the server icloud" on 10.6.8

I use mail from my desktop, not from iCloud on the Internet. I have a MacBook Pro with 10.6.8 Snow Leopard. My mail was working fine until yesterday.
It says "Cannot send message using the server iCloud. connections to the server smtp.me.com on the default ports timed out. Select a different outgoing mail server from the list below.
The list has:
ICloud offline
and Icloud
Neither of them work.
What has Apple changed regarding this in September?
(I know others have posted similar message, but they were on 10.7)

Same problem here.
Recently an @icloud.com version (alias) of my existing @me.com email address appeared on my account. I can still send messages form the OSX build in Mail client as long as I am using the @me.com version of my email, but I do get this message when I try to use the new @icloud.com account.
My account with iCloud states that both @me.com and @icloud.com versions of my email are active.
Would be nice to know if this is a temporary problem of if this is a permanent one.
The settings on the outgoing mail server are default as retrieved from apple when I configured the @me.com email for the first time. I went through the troubleshooting suggestions as provided on Apple website, double checking all the settings, no joy. At the very list I can still use the old @me.com alias with no problem (for now)
MacBook Pro / Mountain Lion 10.8.2

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

Cannot send message using the server (null)

i use mail 2.1.
i have a .mac account and have three other email accounts attached to my mail account.
lately, i cannot send any email.
the switchiing ports fix hasn't helped either.
this is the error message:
CANNOT SEND MESSAGE USING THE SERVER (null)
The server response was: 5.1.0 <email [email protected]>...
From address does not match authentication.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: email <[email protected]>
Send message using: [there is a combo box here with all the four accounts servers listed]
no matter which one i pick it doesn't work and no email is sent.
anyone have this error before? or now how to fix it?
i'd be appreciative.
thanks
1.67 GHz Power PC PowerBook G4 Mac OS X (10.4.6) Sony HDR HC3 HD HandyCam MiniDV

I was having a similar problem (don't feel like typing all the details)
I was about to to delete my com.apple.mail.plist, when finally it hit me.
I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

OSX Mail - Cannot send message using the server ....

Hi there,
Mac Pro with OSX 10.6.
*Can receive mail, but can no longer send email* using the program Mail.
Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
I googled this problem, and found solutions like:
1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
4. We even totally deleted my account, and started a new fresh one. Didn't work
The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
So there, I'm stumped.
Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through 5 OS's (I am using Lion but I had the issue using leopard as well) is a disgrace.

Nokia Has Forsaken the N96 in Asia-Pacific.

Go to the Nokia Asia Pacific support page for the N96 - http://www.nokia-asia.com/get-support-and-software/product-support/nokia-n96 and it's official - Nokia have forsaken this handset.
It's actually quite embarrassing. This page has not changed since December 2008 when firmware version 12.043 came out. And that's been it for Asia Pacific customers. As of today, 31st October 2009, the page still invites you to update to the 'latest' 12.043!!
Meanwhile, the rest of the world has enjoyed firmware releases 21.xxx and now 30.033 (not that it instills me with any confidence that in 30 software versions, Nokia STILL cannot get it right), but this is a downright slap in the face to customers who have paid TOP DOLLAR for this phone (remember, it was the flagship model 12 months ago). It simply isn't good enough, Nokia!
After repeated emails and calls to Nokia, and similar to my service provider, Optus, reporting all the daily crashes, lock-ups and overall SLOWNESS of this phone, I finally took my case to the Telephone Industry Ombudsman (TIO) here in Australia.
I kid you not, within HOURS I had a customer service rep from Optus phoning me to apologise profusely for the lack of support for this phone. Some investigations were made, and Optus, still unable to get any reasonable response from Nokia, offered me an entirely new phone - to my choice - without having to sign up to another plan (I still have 12-months to go on the N96).
So that's it for me everyone! Reading around the forum here I see the N97 is beset with just as much **bleep** as the N96, and so my nice shiny new iPhone 3GS 32GB is on the way. Thanks Optus!!
This N96 is going now where it thoroughly deserves to be - in the bin!! And good riddance!
Needless to say, it is definitely the last Nokia that will ever darken my doorstep. After over 15 years of customer loyalty, I'm off.
See you all over on the iPhone forums?
Ian
Ian Nicholson
Poor Sod/N96 Owner
Nokia: Connecting People... with iPhones.

I think Optus may have been telling you some porkies.
I had similar experiences with my Vodafone Ireland N95 8gb. I bought it with V12. When V21 was released, I waited a few months and nothing happened so I contacted Vodafone who immediately blamed Nokia, so I contacted Nokia only to be told the firmware update had been sent to Vodafone for their modification and approval. It was up to Vodafone to modify the soft to include their branding nd then return it to Nokia for release. After further frustrating calls to Vodafone, I was finally put through to someone who told me that the update was on his desk and he would get round to it the next week and he did. I got my V21 the next week.
When the next update came along, once again I waited and finally decided to ring when there was no sign of it. Again Vodafone's immediate response was to blame Nokia. However I knew better this time and finally got put through to the correct person again. This time he told me they had no intentions of spending anymore time on updates for the N95 8gb because it was not a popular phone for them and that V21 was stable enough. In other words I am stuck at V21 and still amto this day. Maybe I should contact the ombudsman as well.
I think Optus have not told you the truth and have paid you off with a new phone to keep you quiet. The truth is they can't be bothered working on the update since you could be the only one shouting for it.

How to add an error message in the application module?

Hi,
I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
How could I achieve this?
I am using JDeveloper 10G
Thanks

Muhammed,
Have you tried throwing a JboException in your AM code?
John

Messages on the N96

Similar Messages

Maybe you are looking for