Messaging Server 6.2 Configuration

I've just installed Messaging Server for testing purpose on a Solaris 10 x86 (installed for this test).
Each time I send a mail from a Client, I have a message :
'550 5.1.2 <[email protected]>... Host unknown (Name server: mailhost.map.beta.com: host not found).
Here are the explanation of the installations :
I've installed SOLARIS 10 without DNS, the name of the machine is 'wireless'. At the end of the installation of SOLARIS, I've added in etc/hosts the FQDN of my machine which is 'wireless.map.beta.com' in the second column and I made the same thing in etc/inet/ipnodes file. I have checked the 'nsswitch.conf' file and the value for hosts is files.
Afterthat, I've run Java Entreprise Server, and I've choosed 'Directory Server', 'Administration Server', 'Web Server' and 'Access Manager'. I've followed instructions of document '819-2201' to parameter all the applicatiions.
The version of Messaging Server is 6.2 (built Dec 2 2004).
Could someone help me ?

OK, I see why I need an entry in a DNS for the other
servers.
But, in my test I only have one server with all the
applications running and I try to send an email in
the same domain where the server is. Actually, you didn't
[email protected] is not equal to "[email protected]"
How did you create the user? what mail address did you use for the user? what value did you use for "mailhost"?
The FQDN of my server is' wireless.map.beta.com' and
I try to send a mail to '[email protected]'.
So, why the server try to contact another server and
not to route the mail internally ?Please see the several questions above, and answer.
Messaging Server uses quite different mechanisms to route mail, depending heavily on what you place in LDAP, and how you configure your server. . .
Thanks.

Similar Messages

Messaging Server 3.x: Configuration of SMTP-accept port number

This article describes how to change the SMTP-accept port used by Netscape
Messaging Server 3.x for receiving mail. The default port is 25.
<P>
This configuration works with virus detection software like Trend Micro.
<P>
(See attachment)

Hi there
if have sucessfully run the iplanet smtp server on different port then 25 then kindly let me know how to achive that , bcoz even i wanna do that
regards
Prashant

Reconfiguring Message Server

Hello All,
Consider a SAP landscape consisting of a DBCI and a separate Application (DI) server. The message server has been configured at install time to be on the DBCI server. Is it possible to reconfigure so as to host the message server on the APP (DI) server?
Any pointers in this directions are appreciated.
Thanks & Regards,
Subodh

Hi Subodh,
Your DEFAULT Profile should contain the parameter: rdisp/mshost
Change it to point it to the new message server.
and also change the START Profile of that particular application server(DI) to start message server on the application server.
Execute_00 local $(DIR_EXECUTABLE)/sapmscsa -n pf=$(DIR_PROFILE)/<SID>_DVEBMGS<INSTANCE NUMBER>_<hostname>_MS ms.sap<SID>_DVEBMGS<INSTANCE NUMBER>
Something like the above:
replace <SID> , <INSTANCE NUMBER> <hostname> with your details.
However try this thing with your Test instance first.
Regards,
Siddhesh

Directory Server Replica and Messaging Server 6

I install Directory Server 5.2 as Master Replica in one machine (V120) and on the other machine (V240) I install the following:
1. SunONE Directory Server 5.2 (Consumer
Replica) or slave replica.
2. SunONE Identity Server
3. SunONE Messaging Server 6
I have successfully install and configured the 3 Servers, when they are running on just one machine (one box). But when I try to run them in two separate machines as described above, the messaging server acts strangely and it's configuration fails, when i try to configure it on the directory server replica.
In simpler words, I want to know if someone has installed Messaging Server in a Directory Server Replication scenario, where there are two machines involve. Because all works well when we install everything on one machine (one box) but I am having hard time configuring the messaging server in this split setup scenario.
So, if someone has idea about how to run the Messaging Server 6 ( ./configure ) file successfully on a Directory Server 5.2 Replica, please suggest me in detail.
Thanking you,
Farhan Ahmed.
Vision Valley, Dubai.

Messaging Server uses LDAP in two ways. The obvious one is that user/group/domain information is stored there.
The non-obvious way is that some configuration information is stored in LDAP, in the "o=NetscapeRoot" tree. This tree is NOT ususally replicated, so if you perform the installation against one LDAP server, and then attempt to move the configuration to point to another one, and don't make a separate replication agreement for the configuration, your server won't work correctly.
To configure Messaging against a replica, you also need to understand how the replication and "referral" works. Without studying your scenario, I cannot tell what has failed, but indeed, there are users that have configured Messaging 6.0 against a replica LDAP system.
You may want to open a tech support ticket, and get personal help for your issue.

Milter-greylist and Messaging Server

I have been using the milter-greylist for a long time on the sendmail servers and relays, and at least with the older releases I thought this milter only supports local sockets to interact with sendmail (and can listen on the network for peering with other milter-greylist instances). I reviewed the recent release's README, there's no notes of non-local sockets either.
The Wiki [http://msg.wikidoc.info/index.php/About_milter_plugin] suggests, however, that all milters may (and for Messaging Server - must) be configured on a networking socket. It also states that milter-greylist was tested as working with the Sun Messaging Server.
Can somebody please elaborate (ideally - write up a step-by-step how-to on the Wiki) how to integrate this milter with Sun MS, which versions are supported, where do we configure the network-listening socket (is it greylist config or libmilter config), etc.?
Thanks in advance :)

JimKlimov wrote:
The Wiki [http://msg.wikidoc.info/index.php/About_milter_plugin] suggests, however, that all milters may (and for Messaging Server - must) be configured on a networking socket. It also states that milter-greylist was tested as working with the Sun Messaging Server.
I hit this very issue when writing up the guide you refer to -- there is little in the way of information on the Internet regarding the sendmail milter library and getting the milter to listen on a non-unix socket.
Can somebody please elaborate (ideally - write up a step-by-step how-to on the Wiki) how to integrate this milter with Sun MS, which versions are supported, where do we configure the network-listening socket (is it greylist config or libmilter config), etc.?For the milter-greylist I made the following change to the greylist.conf file:
replace:
socket "/var/milter-greylist/milter-greylist.sock"
with:
socket "inet:19025"This causes the milter to listen on an INET port (19025 in this example) vs. a unix socket. You will find that a similar approach will work with other milters that use the sendmail milter library and this is why I mentioned it in the guide:
<snip>
3. Run the milter-server, configure it to run on the INET:<TCP port number> socket.
</snip>
As for writing up wiki's on supported versions and what-not (we don't support specific milters rather we support the milter interface) this is something I simply don't have the time to do. Feel free however to update the milter wiki page with your own testing results.
I did however fix up a number of broken links on the page -- it seems sendmail have moved their milter related information to a new site (milter.org) since I created the page.
If you are looking at greylisting addresses, I would recommend you consider using the following instead as it is far more efficient then calling out to a milter server for this purpose.
http://code.google.com/p/gross/wiki/readme
http://iamthek.com/archives/30
Regards,
Shane.

How to configure Symantec Mail Security for SMTP & Messaging Server 6.3

Hi!
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.
- Could you help me with this issue?,
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.
Regards, CR

ctemp1 wrote:
I want to install a Symantec Mail Security for SMTP 5.0.1(host1) with Messaging Server 6.3 (in production - host2), but when I try to access to POP protocol to send a message from Internet, the system display a message with a relay problem.I take it that you have configured the symantec software like this?
internet -> symantec mail security system -> sun messaging server -> recipientA better approach is the following
internet -> sun messaging server -> recipient
                          |
                         V
              symantec mail security system(refer here: http://blogs.sun.com/factotum/entry/messaging_server_correctly_deploying_the)
- Do you know some documentation that speaks of this?. I can't find any documentation that explain how to configure and integrate SMS and Messaging Server. Thanks in advance.There is no documentation specifically for symantec software but we do document how to send emails via the symantec mail security server using the aliasdetourhost channel keyword:
http://docs.sun.com/app/docs/doc/819-4428/6n6j42615?a=view#bgaqy
Regards,
Shane.

JCo destination/ SLD configuration/ message server GRANT POINTS!

Hi,
I am trying to create JCo Destination, using wizard when I get to the point 3.2 (message server) I do not have my message server listed in the drop down list, althogh it is up running on port 3601.
Here is an error message I ve got at the end.
SLD Data supplier service running and I have HTTP and RFC configuration in place
Thanks Denis
Failed to create new JCO client connection HR_Human_Resouces_Test: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_MsgServJCODestination.CreationClassName="SAP_MsgServJCODestination",Name="HR_Human_Resouces_Test",SystemCreationClassName="SAP_J2EEEngineCluster",SystemName="DE1.SystemHome.sbdevsqlsap2" at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120) at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.getIResult(SimpleResponseAnalyser.java:53) at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:215) at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:147) at com.sap.lcr.api.cimclient.CIMOMClient.createInstanceImpl(CIMOMClient.java:660) at com.sap.lcr.api.cimclient.CIMOMClient.createInstance(CIMOMClient.java:642) at com.sap.lcr.api.cimclient.CIMClient.createInstance(CIMClient.java:730) at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.createInstance(JavaCIMObjectAccessor.java:44) at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.createJCOClientConnection(SystemLandscapeFactory.java:283) at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.createJCOClientConnection(WDSystemLandscape.java:107) at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionFinish(ButtonBar.java:224) at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:265) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304) at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59) at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:159)

Hi Denis,
The below is the Wiki which i have created, please go through the notes.
Configure SLD for JCo and Creation of JCo Destinations
To create JCo connections you need to configure SLD (System Landscape Directory) first and then create JCo destinations.
First lets see as how to configure SLD.
Start Visual Administrator.
To start it
1)     Go to Server Installed path i.e. usr\sap\<systemid>\<systeminstance>\J2ee\admin
2)     Choose go.bat and start it.
3)     Under Global Server Configuration, choose <Serverid>.
4)     Choose Services under it.
5)     Find SLD Data Supplier.
6)     Under System Landscape Directory select HTTP Settings.
7)     Give all the required fields like Host Name, Port Number, User Name and Password.
8)     Similarly choose CIM Client Generation Settings and give Host Name, Port Number, User Name and Password.
9)     You can test the SLD is configured properly or not. Just click CIM Client Test.
10)     Save the settings and close Visual Administrator.
Now that you have configured SLD through Visual Administrator, we can create JCo Connections. To create JCo connections
1)     You will need Super Administrator permissions to create JCos.
2)     Log on to the Portal.
3)     Go to Content Administration  Web Dynpro
4)     Since we have configured SLD, now we can see a button to Create JCo Destination. Click it
5)     Now you can observe Create new JCo Destination on right side panel.
6)     Give the Following Details.
a)     General Data:
Name: Give the name of JCo
Client: Give the Client number to which system you want to create JCo for. Click Next.
b)     J2EE Cluster: Check the Use Local J2EE engine. Click Next.
c)     Connection Type: Select Dictionary Meta Data. Click Next.
d)     Application Server Connection: Select the existing Message Server and Logon Group.
It might sometimes happen that Message Server and Logon Group is not configured to configure them, follow the process
For Message Server:
i.     Log on to SDL through portal i.e. http://<servername>:<portnumber>/sld
ii.     Choose Technical System. Click it.
iii.     You will observe New Technical System button, click it.
iv.     System Type: Select Web AS ABAP , if you want to connect to R/3 System and incase you are using Java application use Web AS Java
v.     General: Log on to R/3 System through SAP Log on pad. Go to System  Status, check for SID, Installation Number and Database Host Name.
vi.     Central Servers: Give Host Name and Port Number and Instance Number.
For Logon Group:
i.     Click on Add New Logon Group, this will open a row in the table.
ii.     Log on to R/3 through Logon pad and get Logon Groups ids and the transaction code is SMLG.
vii.     Application Servers: Click on Add Application Server and then give Host Name and Instance Number of R/3 System.
viii.     Clients: Give Client number (System id) and Logical Client Name (which we can get from SMLG code). And click finish.
7)     Message Server Connection:
i.     Name: Give the logon name of R/3 System
ii.     Password & Confirm Password: Give appropriate password of R/3 System.
8)     Click Finish.
regards
Anil

Instant Messaging Server configuration failed after installation

Hi,
I have a problem with the configuration of Instant Messaging server as part Sun Java Communications Suite 6u2.
IM had been installed using commpkg install --altroot -installroot /opt/sun/comms2 (should run in cluster environment).
Running configure failed when looking for package SUNWiimin. Due to the altroot installation the package information resides under /opt/sun/comms2/var/sadm/...
Since configure is just a shell script those incorrect calls could be fixed (e.g. pkgparam -R /var/opt/sun/comms2 SUNWiimin instead of
pkgparam SUNWiimin.
Unfortunately configure calls com.sun.im.config.core.Configurator as a Java program. In this program IM_BASE seems not tobe set which leads to:
Executing command : null/sbin/impermissions inetuser r /var
Error in executing command : null/sbin/impermissions inetuser r /var
java.io.IOException: null/sbin/impermissions: not found
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:53)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:429)
at com.sun.im.util.Command.execute(Unknown Source)
at com.sun.im.config.util.CommandExecutor.execute(CommandExecutor.java:134)
at com.sun.im.config.util.CommandExecutor.executeRuntimeCommand(CommandExecutor.java:41)
at com.sun.im.config.validation.SROValidator.createRuntimeDir(SROValidator.java:220)
at com.sun.im.config.validation.SROValidator.isValid(SROValidator.java:133)
at com.sun.im.config.validation.PanelValidator.isValid(PanelValidator.java:33)
at com.sun.im.config.core.CLIEngine.renderUI(CLIEngine.java:124)
at com.sun.im.config.core.Configurator.main(Configurator.java:157)
Return value: -1
Is this bug fixed somewhere??
Regards,
Rudiger

rudidotk wrote:
Is this bug fixed somewhere?? This has been known issue for some time that still hasn't been fixed:
bug #6733030 - "IM7.3: altroot installation causes configure to error with null/sbin/impermissions: not found"
Please raise a Sun support request to have this bug escalated.
Regards,
Shane.

Just updated to 3.6.8. Now can't navigate reliably. Frequently get this error message: "Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies th

Just updated to 3.6.8. Now can't navigate reliably. Frequently get this error message: "Server Error in '/' Application. Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster." Pending fix of this glitch, is there a way to go back to previous version of Firefox that worked perfectly well?
== URL of affected sites ==
http://www.americanleather.com/ComfortSleeper/Madison.aspx?page=2

Hi JH,
According to your description, my understanding is that you got an error when you deleted columns in SharePoint 2010.
Please add the following string in <system.web> section of your web.config file :
<pages validateRequest="false" enableEventValidation="false" viewStateEncryptionMode ="Never" />
Note: before changing web.config, please make a backup for the file.
Here are some similar posts for you to take a look at:
http://forums.asp.net/p/1355367/2778642.aspx
http://forums.asp.net/t/1166634.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Is it possible to delete message in the server using Mail configured using IMAP?

Is it possible to delete message in the server using Mail configured using IMAP?
Currently when I delete the message in Mail, the server still keep a copy of it, which means it is not deleted on the server. I know that POP can do this but I still want the option of being able to access it from other computers.
My server has only a small size, so I hope that I can just delete it from my Mail instead of having to log in to the server and delete it again.
Thank you.

yxchng wrote:
Is it possible to delete message in the server using Mail configured using IMAP?
Yes, but doing so will remove it from everything else.

Installed sync on Firefox 3.6.8. I receive error message: Server Incorrectly Configured. How to fix it?

I installed Sync on Windows XP Home Edition, Firefox 3.6.8, with Zone Alarm and AVG anti-virus. Sync is not updating, instead it produces error message: Server Incorrectly Configured and hangs up. How to fix it?

You might want to also post on this Google Group dedicated to Sync (formerly known as Weave), since it's such a new add-on.
http://groups.google.com/group/mozilla-labs-weave

MESSAGING SERVER CONFIGURATION service.http.smtphost

Hi!
I've migrated from Messaging Server 6.3 to MS 7.0, in previous version there was a property service.http.smtphost, in this property I configured my Antivirus Server, but in version 7, where can I do this?, Is there an equivalent property/configuration?
Thanks!!

JulioMedjav wrote:
I've migrated from Messaging Server 6.3 to MS 7.0, in previous version there was a property service.http.smtphost, in this property I configured my Antivirus Server, but in version 7, where can I do this?, Is there an equivalent property/configuration?The parameter hasn't changed:
bash-3.00# ./configutil -H -o service.http.smtphost
Configuration option: service.http.smtphost
Description: SMTP relay host. If you are using LMTP, set this to the machine name of the LMTP host.
Syntax: string
service.http.smtphost is currently set to: 127.0.0.1Regards,
Shane.

How to install and configure Sun java messaging server 6 2005Q4

Hi all,
Please tell the steps to install and configure Sun Java Messaging Server 6 2005Q4.
Thanks.

You aren't providing a lot of informations... in this case the answer could be: run the command
/cdrom/jes_05_q4_dvd/Solaris_sparc/installer
if you just want to install messaging server on a single host, for evaluation purpose, in the documentation
http://docs.sun.com/app/docs/doc/819-4879
there is an exhaustive guide. If instead you're trying to addres some specific question, then please give us more details such as O.S., schema version, and so on...
regards

Is there a possibility by which i can configure Netscape Messaging server as a POP server.

I'm running Netscape Messaging server on Solaris 8 is there a provision to configure the NMS as a POP server.SO user's could download the mail through mail clients like Outlook express.

Which version is it? Netscape 4.x or Iplanet 5.x? In both cases the information to configure your mailrelay server as a pop3-server is contained in the administration guide. There you can find everything there is to know about pop3. And it is a lot...
The manuals can be found on the internet: www.iplanet.com.
Good luck.
Paul

Configure messaging server and MTA on different machine

Is there anyways to install / configure messaging server and MTA on different machine? I am using Sun One Messaging server 6.0
Thanks
Haris

Thanks for the reply, How MTA can be disabled on the
messaging server? how can i disable the store on the
MTA machine, Is there any documentation for it?Yes, the documentation helps you. You cannot totally disable the MTA. If you did, how would you get mail to the store?
Also
is it possible to use some another machine for
webmail?Well, um, kind of. The webmail interface provided with Messaging Server interacts directly with the store, so you can't truly run that remotely, but .. .
You can install the server on a remote box, and turn on "Messaging Express Multiplexor", a proxy for webmail. Users can then connect to the MEM box, and be forwarded to the store for their mails.
It should be possible to use a third-party webmail product that uses something like IMAP to talk to the store, too. that would be unsupported, but possible. Most users find MEM to be very good.
What problem are you trying to solve? Perhaps I can better help you if I know why you're asking these questions, and offer a better solution to you.
>
Thanks
Haris

Messaging Server 6.2 Configuration

Similar Messages

Maybe you are looking for