Messy code problem while translating XString to String in OfficeControl

Hi Expert,
I have messy code problem while translating XString to String in XML-Format Word Doc in OfficeControl.
I upload an XML-Format template Word Doc to server as a MIME Object.
When OfficeControl is started in Web Dynpro, OfficeControl automatically open the XML-Format template.
For the first time, I get the XString-type Context attribute bind to the content of the Word Doc,
then translate it to string, I got the XML-format content, it's great!
However, after the first time, when I input any new contents in MS Word in Web Dynpro,
no matter I execute "Ctrl + S" or click the "savedocument" button,
when I translate the XString Context attribute to String, I got messy code. (but the first time, it is good plain text)
I use the function module: ECATT_CONV_XSTRING_TO_STRING (good for first time, dump after first time),
SCMS_XSTRING_TO_BINARY, SCMS_BINARY_TO_STRING (good for first time, messy code after first time).
My Demo source code is in: (system) SMV --> (local object) zhaode --> (Dynpro Component) ztest_office_control
core source code is as:
clear itab.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
BUFFER = lv_datas
IMPORTING
OUTPUT_LENGTH = lv_length
TABLES
binary_tab = itab.
CALL FUNCTION 'SCMS_BINARY_TO_STRING'
EXPORTING
input_length = lv_length
mimetype = 'text/plain; charset=utf-8'
IMPORTING
text_buffer = lv_datas_string
output_length = lv_data_len
TABLES
binary_tab = itab.
Can you give me some advice?
Many thanks in advance.
Best Regards,

You have already posted this same question several times (and some very similiar questions) within the forum. Please do NOT multiple post your questions. This is against the forum rules of engagement. SAP employee or not, you will find yourself banned from the forums if you don't follow the rules.

Similar Messages

Problem with Column types and String

Hi
I have some problem while comparing against empty string.
My column is of type it_Linked_Button. Actually it seems that column type doesn't matter.
If cell that belongs to this column is empty and based on other columns' values I put some value into this cell.
It works fine.
But when I clear that cell and try to put some value again nothing happens.
In my if statement I'm checking against empty string and it fails second time.
Before I put anything in that cell (in debugger) that value is "" so it is empty and it works.
(OK, I see that after I posted this message it was slightly reformated)
But after I put something and clear that cell and try to put something again (in debugger) I get "(here is some long space) " which fails String.IsNullOrEmpty(var) test.
What is going on? Has it something to do with Column type?
How to clear it so I can put something in it again?
One more thing - to put values and clear it I use DbDataSource SetValue method. And String.Empty or ""(doesn't matter)
Thanks
Kamil
NOTE
I made some workaround that gives me the behaviour I want but still I would like to know what is going on?
Edited by: Kamil Wydrzycki on Sep 24, 2009 12:57 PM

DrLaszloJamf wrote:
warnerja wrote:
DrLaszloJamf wrote:
1. Could you define an Enum? Then you could switch on enum values.
2. Wait for Java 7 which is supposed to extend switch to strings?3. Put the target strings in a collection, write a loop to find the match in the collection and use the matching index in the switch statement. At least that will get rid of the hashcode kludge, where it won't mistakenly 'match' a string which isn't the actual target.3b: Map<String, Command>Yep.
I also wanted to point this out to the OP:
For example, let's say the 7 character string "BugABoo" happens to have the same hashcode as "EDI_DOC". And let's say your input just happens to have the string "BugABoo" in it, where you're extracting the 7 character substring. See the problem? You're getting "BugABoo" but treating it as if it really were "EDI_DOC", by virtue of comparing hashcodes instead of actual strings.
OOPS!

Problem in code with Google Translate

hi
i have Problem in code with Google Translate
Imports Google.API.Translate.Language
Imports Google.API.Translate
Public Class Form1
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim text As String = "hello"
Dim tr As New TranslateClient("https://translate.google.com")
Dim xx As String = tr.Translate(text, Language.English, Language.French, Google.API.Translate.TranslateFormat.Text)
MsgBox(xx)
End Sub
End Class
All things good but it shows an error in the second line

For assistance with Google API's contact Google.
La vida loca

Memory leak problem while passing Object to stored procedure from C++ code

Hi,
I am facing memory leak problem while passing object to oracle stored procedure from C++ code.Here I am writing brief description of the code :
1) created objects in oracle with the help of "create or replace type as objects"
2) generated C++ classes corresponding to oracle objects with the help of OTT utility.
3) Instantiating classes in C++ code and assigning values.
4) calling oracle stored procedure and setting object in statement with the help of setObject function.
5) deleted objects.
this is all I am doing ,and getting memory leak , if you need the sample code then please write your e-mail id , so that I can attach files in reply.
TIA
Jagendra

just to correct my previous reply , adding delete statement
Hi,
I am using oracle 10.2.0.1 and compiling the code with Sun Studio 11, following is the brief dicription of my code :
1) create oracle object :
create or replace type TEST_OBJECT as object
( field1 number(10),
field2 number(10),
field3 number(10) )
2) create table :
create table TEST_TABLE (
f1 number(10),f2 number (10),f3 number (10))
3) create procedure :
CREATE OR REPLACE PROCEDURE testProc
data IN test_object)
IS
BEGIN
insert into TEST_TABLE( f1,f2,f3) values ( data.field1,data.field2,data.field3);
commit;
end;
4) generate C++ classes along with map file for database object TEST_OBJECT by using Oracle OTT Utility
5) C++ code :
// include OTT generate files here and other required header files
int main()
int x = 0;
int y = 0;
int z =0;
Environment *env = Environment::createEnvironment(Environment::DEFAULT);
Connection* const pConn =
env->createConnection"stmprf","stmprf","spwtrgt3nms");
const string sqlStmt("BEGIN testProc(:1) END;");
Statement * pStmt = pConn->createStatement(sqlStmt);
while(1)
TEST_OBJECT* pObj = new TEST_OBJECT();
pObj->field1 = x++;
pObj->field2 = y++;
pObj->field3 = z++;
pStmt->setObject(1,pObj);
pStmt->executeUpdate();
pConn->commit();
delete pObj;
}

Translation problem , While conversion from English to Poland

Hello Gurus
Pl suggest Translation problem , While conversion from English to Poland getting message
"Code page not found for Poland "
Code page 1401 exits in system
SAP version 4.6C
Best regards
Krish

Dear Vamsi,
Please check the below lonk may be it heps.
Translation to different languages. How??????
Regards
Pranay

Problem While Executing T.CODE DP90

Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1.     We are creating Sales Order and system will create Service order automatically as per the configuration.
2.     In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
   Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PM

Hi Prashanth,
      Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of   Cost element and Blank activity type so, we are getting different material in DP90.

Experiencing the problems while encoding the barcode with Code 128 font

Hi Tim,
Hope you are doing good.
We are experiencing the problems while encoding the barcode with Code 128 font.we have followed the Oracle BI Publisher Blog i.e Barcoding 102 http://blogs.oracle.com/xmlpublisher/discuss/msgReader$281.
Before applying the encoding Java class we were able to display the barcode but after applying this encoding Java class we are not able to display the barcode.
We are requesting you to help us for encoding the barcode with Code 128 font and read barcode by scanner.
We will appreciate and thankful if anybody help us in this regard
Thanks,
SubbaRao.

Hi Tim,
I am trying to create 128 Barcode, output shows little junk characters. I followed the your "Barcoding 102 instrucitons but no luck. I apprciate your help if you provide some help on this.
http://blogs.oracle.com/xmlpublisher/2006/06/06
1. Created Java class under $JAVA_TOP/oracle/apps/oracle/xdo/template/util/barcoder
2. Registeted and applied the format the barcode to the form field. I will sedn my XML, RTF and Java class, Would you pleae advice me on this
Thanks
Venu

Problem while executing the transaction code FMBV (Reconstruct)

We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,

Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors.

Problem while incrementing a variable in Jasper Reports

Hi
I am using Jasper Reports for designing reports. These reports will be used by my Java application.
But there is problem while I am trying to increment a variable depending on some condition.
Requirement: I have to display information about all the residents in a hospital in a single report. Resident information will be fetched from the XML file. When a resident ID is found in the XML, then the variable(resno) shoud be incremented. I have set the initial value to 1.
Problem: Only for the first resident, resno is showing as 1. For all the remaining residents, its showing as 0 (zero).The variable 'resno' is not incrementing for each resident.
Even the ResidentID is not null. All the ResidentID's exists in the XML file.
Please find the code below.
<variable name="resno" class="java.lang.Integer" incrementType="Group" incrementGroup="residentbrk" calculation="Count">
<initialValueExpression><![CDATA[new Integer(1)]]></initialValueExpression>
</variable>
<group name="residentbrk" isStartNewPage="true">
<groupExpression><![CDATA[$F{ResidentID}]]></groupExpression>
<groupHeader>
<band height="16">
<textField hyperlinkType="None">
<reportElement positionType="Float" x="0" y="-1" width="96" height="17"/>
<textElement>
<font isBold="true"/>
</textElement>
<textFieldExpression class="java.lang.String"><![CDATA[$R{residentno}]]></textFieldExpression>
</textField>
<textField hyperlinkType="None">
<reportElement positionType="Float" x="96" y="-2" width="64" height="18"/>
<textElement/>
<textFieldExpression class="java.lang.Integer"><![CDATA[$V{resno}]]></textFieldExpression>
</textField>
</band>
</groupHeader>
</group>
Could you please provide a solution for this.

Not clear at all. May be like this
declare
v_temp varchar2(100);
v_final number;
begin
--loop
v_temp:='sun';
v_temp:=translate(lower(v_temp), '1abcdefghijklmnopqrstuvwxyz', '1');
dbms_output.put_line('Temp:'||v_temp);
v_temp := v_temp || 'Mon5.1';
v_temp:=translate(lower(v_temp), '1abcdefghijklmnopqrstuvwxyz', '1');
dbms_output.put_line('Temp:'||v_temp);
v_temp:= v_temp || 'Tue';
v_temp:=translate(lower(v_temp), '1abcdefghijklmnopqrstuvwxyz', '1');
dbms_output.put_line('Temp:'||v_temp);
v_final:=to_number(v_temp);
dbms_output.put_line('v_final'||v_final);
--coalesce
--end loop;
end;
/

Problem while sending unicode (utf-8) xml to IE.

Hi,
I have encoding problem while sending utf-8 xml from servlet to IE (Client), where i am parsing the xml using Ajax.
In the log I can see proper special characters that are being sent from the servlet. but when same is seen in the client end,, it is showing ? symbols instead of special charcters.
This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new StreamResult(new OutputStreamWriter(stream, "iso-8859-1")));
_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));
In the log i can see :
<response status="success" value="1154081722531" hasNextPage="false" hasPreviousPage="false" ><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd �" mode="edit" column_en_US="asdasd �" column_de_DE="? xyz" column_fr_FR="" ></row></response>
But in the Client side I am able to see
<?xml version = '1.0' encoding = 'UTF-8'?>
<response status="success" value="1154082795061" hasNextPage="false" hasPreviousPage="false"><row row_id="PARTY_test_asdasd" column_0="PARTY_test_asdasd" column_1="asdasd ?" mode="edit" column_en_US="asdasd ?" column_de_DE="? xyz" column_fr_FR=""/></response>
I am getting ? instead of �.
It will be greatful if somebody tell how to send utf xml from servlet, for ajax purpose.
Thanks,
Siva1

This is the code that sends the xml from servlet.
ByteArrayOutputStream stream = new
ByteArrayOutputStream(2000);
transformer.transform(new DOMSource(document), new
StreamResult(new OutputStreamWriter(stream,
"iso-8859-1")));Here you produce XML that's encoded in ISO-8859-1. (!!!)
_response.setContentType("text/xml; charset=UTF-8");Here you tell the browser that it's encoded in UTF-8.
_response.getWriter().println(new String(stream.toByteArray(), "UTF-8"));Here you convert the XML to a String, assuming that it was encoded in UTF-8, which it wasn't.
Besides shooting yourself in the foot by choosing ISO-8859-1 for no good reason, you're also doing a lot of translating from bytes to chars and back again. Not only is that a waste of time, it introduces errors if you don't do it right. Try this instead:_response.setContentType("text/xml; charset=UTF-8");
_response.setHeader("Cache-Control", "no-cache");
_transformer.transform(new DOMSource(document_),
new StreamResult(_response.getOutputStream()));

Facing problem while going to catch return result from web-services.

Hi everybody,
I am new to BPEL. I am facing problem while going to catch the attributes of resultsets returning from web-services(QAS). As far as my knowledge, two types of results it should return - XML entities and another is attributes which is coming as the part of XML entitites. I am able to catch the XML entities, but can't catch the attributes under it. Even, I am not able to see whether web-services returning something within that field.
When, I tried to catch the attribute and store to a temporary varilable using the following code:
*<assign name="AssignQASDoGetAddress1">*
*<copy>*
*<from variable="InvokeQAS_DoSearch_OutputVariable"*
part="body"
query="/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded"/>
*<to variable="temp"/>*
*</copy>*
*</assign>*
but, I am facing the following selectionFailure errors after running it:
*"{http://schemasxmlsoap.org/ws/2003/03/business-process/}selectionFailure" has been thrown.*
-<selectionFailure xmlns="http://schemasxmlsoap.org/ws/2003/03/business-process/">
-<part name="summary">
*<summary>*
empty variable/expression result.
xpath variable/expression expression "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')" is empty at line 269, when attempting reading/copying it.
Please make sure the variable/expression result "bpws:getVariableData('InvokeQAS_DoSearch_OutputVariable', 'body', '/ns6:QASearchResult/ns6:QAPicklist/ns6:PicklistEntry/@PostcodeRecoded')"is not empty.
*</summary>*
*</part>*
*</selectionFailure>*
Getting this error it seems to me that web-service is returning nothing, but, it returns something as it has been catched using a method called isPostcodeRecoded() Java Code in Oracle ADF. This method has been used as it should return boolean whereas for catching the xml entities using java code we used the method like getPostcode(), getMoniker().
For your information, we are using Jdeveloper as the development tool for building the BPEL process.
Am I doing any syntax error. Please consider it as urgent and provide me asolution.
Thanks in advance.
Chandrachur.

Thanks Dave and Marc, for your suggestions. Actually what I found is QAS web-service is returning nothing as attributes when the attributes are set to the default value. For example, following is the part of the wsdl of the result which QAS webservice returns.
<xs:element name="QASearchResult">
- <xs:complexType>
- <xs:sequence>
<xs:element name="QAPicklist" type="qas:QAPicklistType" minOccurs="0" />
<xs:element name="QAAddress" type="qas:QAAddressType" minOccurs="0" />
</xs:sequence>
<xs:attribute name="VerifyLevel" type="qas:VerifyLevelType" default="None" />
</xs:complexType>
</xs:element>
<xs:complexType name="QAPicklistType">
- <xs:sequence>
<xs:element name="FullPicklistMoniker" type="xs:string" />
<xs:element name="PicklistEntry" type="qas:PicklistEntryType" minOccurs="0" maxOccurs="unbounded" />
<xs:element name="Prompt" type="xs:string" />
<xs:element name="Total" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="AutoFormatSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoFormatPastClose" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinSafe" type="xs:boolean" default="false" />
<xs:attribute name="AutoStepinPastClose" type="xs:boolean" default="false" />
<xs:attribute name="LargePotential" type="xs:boolean" default="false" />
<xs:attribute name="MaxMatches" type="xs:boolean" default="false" />
<xs:attribute name="MoreOtherMatches" type="xs:boolean" default="false" />
<xs:attribute name="OverThreshold" type="xs:boolean" default="false" />
<xs:attribute name="Timeout" type="xs:boolean" default="false" />
</xs:complexType>
<xs:complexType name="PicklistEntryType">
- <xs:sequence>
<xs:element name="Moniker" type="xs:string" />
<xs:element name="PartialAddress" type="xs:string" />
<xs:element name="Picklist" type="xs:string" />
<xs:element name="Postcode" type="xs:string" />
<xs:element name="Score" type="xs:nonNegativeInteger" />
</xs:sequence>
<xs:attribute name="FullAddress" type="xs:boolean" default="false" />
<xs:attribute name="Multiples" type="xs:boolean" default="false" />
<xs:attribute name="CanStep" type="xs:boolean" default="false" />
<xs:attribute name="AliasMatch" type="xs:boolean" default="false" />
<xs:attribute name="PostcodeRecoded" type="xs:boolean" default="false" />
<xs:attribute name="CrossBorderMatch" type="xs:boolean" default="false" />
<xs:attribute name="DummyPOBox" type="xs:boolean" default="false" />
<xs:attribute name="Name" type="xs:boolean" default="false" />
<xs:attribute name="Information" type="xs:boolean" default="false" />
<xs:attribute name="WarnInformation" type="xs:boolean" default="false" />
<xs:attribute name="IncompleteAddr" type="xs:boolean" default="false" />
<xs:attribute name="UnresolvableRange" type="xs:boolean" default="false" />
<xs:attribute name="PhantomPrimaryPoint" type="xs:boolean" default="false" />
</xs:complexType>
here the attributes like FullAddress, PostcodeRecodedare , etc. are not being return by the web-service when it is getting the default value false. But, if it gets true then , it is being displayed at the BPEL console.
Do you have any idea how can I catch the attributes and its value even when it gets the default value which is already set. Previously, it was returning(it was not being displayed at the console).
Thanks once again for your valuable suggestions...!!!
Chandrachur.

Problem while inserting into a table which has ManyToOne relation

Problem while inserting into a table *(Files)* which has ManyToOne relation with another table *(Folder)* involving a attribute both in primary key as well as in foreign key in JPA 1.0.
Relevent Code
Entities:
public class Files implements Serializable {
@EmbeddedId
protected FilesPK filesPK;
private String filename;
@JoinColumns({
@JoinColumn(name = "folder_id", referencedColumnName = "folder_id"),
@JoinColumn(name = "uid", referencedColumnName = "uid", insertable = false, updatable = false)})
@ManyToOne(optional = false)
private Folders folders;
public class FilesPK implements Serializable {
private int fileId;
private int uid;
public class Folders implements Serializable {
@EmbeddedId
protected FoldersPK foldersPK;
private String folderName;
@OneToMany(cascade = CascadeType.ALL, mappedBy = "folders")
private Collection<Files> filesCollection;
@JoinColumn(name = "uid", referencedColumnName = "uid", insertable = false, updatable = false)
@ManyToOne(optional = false)
private Users users;
public class FoldersPK implements Serializable {
private int folderId;
private int uid;
public class Users implements Serializable {
@Id
@GeneratedValue(strategy = GenerationType.IDENTITY)
private Integer uid;
private String username;
@OneToMany(cascade = CascadeType.ALL, mappedBy = "users")
private Collection<Folders> foldersCollection;
I left out @Basic & @Column annotations for sake of less code.
EJB method
public void insertFile(String fileName, int folderID, int uid){
FilesPK pk = new FilesPK();
pk.setUid(uid);
Files file = new Files();
file.setFilename(fileName);
file.setFilesPK(pk);
FoldersPK folderPk = new FoldersPK(folderID, uid);
// My understanding that it should automatically handle folderId in files table,
// but it is not…
file.setFolders(em.find(Folders.class, folderPk));
em.persist(file);
It is giving error:
Internal Exception: java.sql.SQLException: Field 'folderid' doesn't have a default value_
Error Code: 1364
Call: INSERT INTO files (filename, uid, fileid) VALUES (?, ?, ?)_
_ bind => [hello.txt, 1, 0]_
It is not even considering folderId while inserting into db.
However it works fine when I add folderId variable in Files entity and changed insertFile like this:
public void insertFile(String fileName, int folderID, int uid){
FilesPK pk = new FilesPK();
pk.setUid(uid);
Files file = new Files();
file.setFilename(fileName);
file.setFilesPK(pk);
file.setFolderId(folderId) // added line
FoldersPK folderPk = new FoldersPK(folderID, uid);
file.setFolders(em.find(Folders.class, folderPk));
em.persist(file);
My question is that is this behavior expected or it is a bug.
Is it required to add "column_name" variable separately even when an entity has reference to ManyToOne mapping foreign Entity ?
I used Mysql 5.1 for database, then generate entities using toplink, JPA 1.0, glassfish v2.1.
I've also tested this using eclipselink and got same error.
Please provide some pointers.
Thanks

Hello,
What version of EclipseLink did you try? This looks like bug https://bugs.eclipse.org/bugs/show_bug.cgi?id=280436 that was fixed in EclipseLink 2.0, so please try a later version.
You can also try working around the problem by making both fields writable through the reference mapping.
Best Regards,
Chris

Jdev11.1.1.6.0-Error while translating message to native format-FileWrite

Im reading a file from a service and transforming the data and writing them into a file through the external reference using a Mediator component.
I have no problem while building or deploying.
But while executing I get an error as follows:
Non Recoverable System Fault :
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'WriteAppointmentRequestInLogFile' failed due to: Translation Error. Translation Error. Error while translating message to native format. Please make sure that the payload for the outbound interaction conforms to the schema. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
My input is a File Adpater Read operation and output is File Adapter Write operation.
The schemas are as below:
Input schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
targetNamespace="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
<xsd:element name="doctorAppointmentRequestRoot"><xsd:complexType>
<xsd:sequence>
<xsd:element name="doctorAppointmentRequest" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C7" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C9" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C10" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C11" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C12" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C13" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C14" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C15" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Output Schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
targetNamespace="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
<xsd:element name="AppointmentRequestsLog"><xsd:complexType>
<xsd:sequence>
<xsd:element name="AppointmentRequest" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C3" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C7" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C9" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>


Transformation XSL used in Mediator:
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/ReadFileDoctorsAppointmentRequest"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:imp1="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:ns1="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:bpmn="http://schemas.oracle.com/bpm/xpath"
xmlns:ns0="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/LogDoctorAppointmentRequests"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
exclude-result-prefixes="xsi xsl tns pc plt wsdl imp1 jca xsd ns1 ns0 xp20 bpws bpel bpm ora socket mhdr oraext dvm hwf med ids xdk xref bpmn ldap">
<xsl:template match="/">
<ns1:AppointmentRequestsLog>
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C4>
<xsl:value-of select="concat(/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2,/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C3)"/>
</ns1:C4>
<ns1:C5>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C4"/>
</ns1:C5>
<ns1:C6>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C5"/>
</ns1:C6>
<ns1:C7>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C12"/>
</ns1:C7>
<ns1:C8>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C14"/>
</ns1:C8>
<ns1:C9>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C15"/>
</ns1:C9>
</ns1:AppointmentRequest>
</ns1:AppointmentRequestsLog>
</xsl:template>
</xsl:stylesheet>
Just in case if you are aware, Im trying the example in Lucas Jellema's book Chapter 7 and Im getting the error there in the first example project.
I have seen few very old threads on this problem in the forum but none of them had any answers so opening up a new one.
Thanks.

Your transformation with for-each look is incorrect.
This is what you have right now:
<ns1:AppointmentRequestsLog>
<xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C3>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2"/>
</ns1:C3>This is the correct way to write for-each within XSLT:
<ns1:AppointmentRequestsLog>
<xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C3>
<xsl:value-of select="imp1:C2"/>
</ns1:C3>Also, check the flow trace in the EM console for the instance which errored out and paste here the data which is being sent to the FileWrite Adapter. Also, you need to ensure that any elements which are defined as xs:int should not have empty string as values. For example in your write schema C3 has int. So you should map C3 in XSLT like following:
<xsl:choose>
<xsl:when test="imp1:C2 and string-length(imp1:C2) > 0">
<ns1:C3>
<xsl:value-of select="imp1:C2"/>
</ns1:C3>
</xsl:when>
<xsl:otherwise>
<ns1:C3>0</ns1:C3>
</xsl:otherwise>
</xsl:choose>

Problem while accessing a complex data type

hi,
I am getting a problem while accessing a complex data type
I have a wsdl as:
<?xml version="1.0" encoding="UTF-8" ?>
- <definitions name="OutlookReminderService" targetNamespace="http://ws.aftek.com/outlook-reminder" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:ns2="http://ws.aftek.com/outlook-reminder/schemas" xmlns:ns3="http://java.sun.com/jax-rpc-ri/internal" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://ws.aftek.com/outlook-reminder" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <types>
- <schema targetNamespace="http://ws.aftek.com/outlook-reminder/schemas" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://ws.aftek.com/outlook-reminder/schemas" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
<import namespace="http://java.sun.com/jax-rpc-ri/internal" />
- <complexType name="TaskVO">
- <sequence>
<element name="dueDate" type="long" />
<element name="percentageComplete" type="int" />
<element name="priorty" type="int" />
<element name="reminderDate" type="long" />
<element name="reminderSet" type="boolean" />
<element name="startDate" type="long" />
<element name="status" type="int" />
<element name="subject" type="string" />
<element name="taskId" type="string" />
</sequence>
</complexType>
- <complexType name="NoSuchUserException">
- <sequence>
<element name="message" type="string" />
</sequence>
</complexType>
- <complexType name="ArrayOfContactVO">
- <complexContent>
- <restriction base="soap11-enc:Array">
<attribute ref="soap11-enc:arrayType" wsdl:arrayType="tns:ContactVO[]" />
</restriction>
</complexContent>
</complexType>
- <complexType name="ContactVO">
- <sequence>
<element name="birthDate" type="long" />
<element name="companyAddress" type="string" />
<element name="companyName" type="string" />
<element name="emailID1" type="string" />
<element name="emailID2" type="string" />
<element name="emailID3" type="string" />
<element name="faxNumber" type="string" />
<element name="firstName" type="string" />
<element name="homeAddress" type="string" />
<element name="lastName" type="string" />
<element name="middleName" type="string" />
<element name="mobileNumber" type="string" />
<element name="phoneNumber" type="string" />
<element name="workContactNumber" type="string" />
</sequence>
</complexType>
</schema>
- <schema targetNamespace="http://java.sun.com/jax-rpc-ri/internal" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://java.sun.com/jax-rpc-ri/internal" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
<import namespace="http://ws.aftek.com/outlook-reminder/schemas" />
- <complexType name="arrayList">
- <complexContent>
- <extension base="tns:list">
<sequence />
</extension>
</complexContent>
</complexType>
- <complexType name="list">
- <complexContent>
- <extension base="tns:collection">
<sequence />
</extension>
</complexContent>
</complexType>
- <complexType name="collection">
- <complexContent>
- <restriction base="soap11-enc:Array">
<attribute ref="soap11-enc:arrayType" wsdl:arrayType="anyType[]" />
</restriction>
</complexContent>
</complexType>
</schema>
</types>
<message name="OutlookServer_addTaskResponse" />
- <message name="OutlookServer_getListResponse">
<part name="result" type="ns3:arrayList" />
</message>
- <message name="OutlookServer_getContactListResponse">
<part name="result" type="ns2:ArrayOfContactVO" />
</message>
- <message name="NoSuchUserException">
<part name="NoSuchUserException" type="ns2:NoSuchUserException" />
</message>
- <message name="OutlookServer_getContactList">
<part name="String_1" type="xsd:string" />
</message>
- <message name="OutlookServer_getList">
<part name="String_1" type="xsd:string" />
</message>
- <message name="OutlookServer_addTask">
<part name="String_1" type="xsd:string" />
<part name="TaskVO_2" type="ns2:TaskVO" />
</message>
- <message name="OutlookServer_reminderOccurredResponse">
<part name="result" type="xsd:boolean" />
</message>
- <message name="OutlookServer_reminderOccurred">
<part name="String_1" type="xsd:string" />
<part name="TaskVO_2" type="ns2:TaskVO" />
</message>
- <portType name="OutlookServer">
- <operation name="addTask" parameterOrder="String_1 TaskVO_2">
<input message="tns:OutlookServer_addTask" />
<output message="tns:OutlookServer_addTaskResponse" />
<fault message="tns:NoSuchUserException" name="NoSuchUserException" />
</operation>
- <operation name="getContactList" parameterOrder="String_1">
<input message="tns:OutlookServer_getContactList" />
<output message="tns:OutlookServer_getContactListResponse" />
<fault message="tns:NoSuchUserException" name="NoSuchUserException" />
</operation>
- <operation name="getList" parameterOrder="String_1">
<input message="tns:OutlookServer_getList" />
<output message="tns:OutlookServer_getListResponse" />
<fault message="tns:NoSuchUserException" name="NoSuchUserException" />
</operation>
- <operation name="reminderOccurred" parameterOrder="String_1 TaskVO_2">
<input message="tns:OutlookServer_reminderOccurred" />
<output message="tns:OutlookServer_reminderOccurredResponse" />
<fault message="tns:NoSuchUserException" name="NoSuchUserException" />
</operation>
</portType>
- <binding name="OutlookServerBinding" type="tns:OutlookServer">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <operation name="addTask">
<soap:operation soapAction="" />
- <input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</input>
- <output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</output>
- <fault name="NoSuchUserException">
<soap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" name="NoSuchUserException" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</fault>
</operation>
- <operation name="getContactList">
<soap:operation soapAction="" />
- <input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</input>
- <output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</output>
- <fault name="NoSuchUserException">
<soap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" name="NoSuchUserException" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</fault>
</operation>
- <operation name="getList">
<soap:operation soapAction="" />
- <input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</input>
- <output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</output>
- <fault name="NoSuchUserException">
<soap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" name="NoSuchUserException" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</fault>
</operation>
- <operation name="reminderOccurred">
<soap:operation soapAction="" />
- <input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</input>
- <output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</output>
- <fault name="NoSuchUserException">
<soap:fault encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" name="NoSuchUserException" namespace="http://ws.aftek.com/outlook-reminder" use="encoded" />
</fault>
</operation>
</binding>
- <service name="OutlookReminderService">
- <port binding="tns:OutlookServerBinding" name="OutlookServerPort">
<soap:address location="http://truptid:8080/outlook-reminder-service/outlook" />
</port>
</service>
</definitions>
My client is :
private static String     BODY_NAMESPACE_VALUE     = "http://ws.abc.com/outlook-reminder";
     private static String     ENCODING_STYLE_PROPERTY     = "javax.xml.rpc.encodingstyle.namespace.uri";
     private static String     NS_XSD                         = "http://www.w3.org/2001/XMLSchema";
     private static String     URI_ENCODING               = "http://schemas.xmlsoap.org/soap/encoding/";
try{
ServiceFactory factory = ServiceFactory.newInstance();
                    Service service = factory.createService(new QName("OutlookReminderService"));
                    QName port =new QName("OutlookReminderService","OutlookServerPort");
                    Call call =service.createCall(port);
                    call.setTargetEndpointAddress("http://localhost:8080/outlook-reminder-service/outlook?wsdl");
                    call.setProperty(Call.SOAPACTION_USE_PROPERTY, new Boolean(true));
                    call.setProperty(Call.SOAPACTION_URI_PROPERTY, "");
                    call.setProperty(ENCODING_STYLE_PROPERTY, URI_ENCODING);
                    call.getReturnType();
                    call.setOperationName(new QName(BODY_NAMESPACE_VALUE, "getList"));
                    QName QNAME_TYPE_STRING = new QName(NS_XSD, "string");
                    call.addParameter("String_1", QNAME_TYPE_STRING, ParameterMode.IN);
                    //http://ws.aftek.com/outlook-reminder/schemas
                    QName QNAME_TYPE_VO = new QName("http://schemas.xmlsoap.org/soap/encoding/", "Array");
                    System.out.println("Before Add Parameter");
               //     call.addParameter("result", QNAME_TYPE_VO, ParameterMode.OUT);
                    call.setReturnType(QNAME_TYPE_VO,ArrayList.class);
                    System.out.println("After Add Parameter");
                    Object[] params ={oUserVO.getUserName()};
                    oArrayList =(ArrayList)call.invoke(params);
                    System.out.println("After Invoked");
                    //System.out.println("invoked"+ arrayList);
               catch(SOAPFaultException faultException)
                    moLogger.debug("SOAPFaultException : ", faultException);
               catch(RemoteException oremoteException)
                    moLogger.debug("RemoteException", oremoteException);
          catch(ServiceException oServiceException)
                    moLogger.debug("ServiceException", oServiceException);          }
Error got is :
trailing block elements must have an id attribute
     at com.sun.xml.rpc.encoding.SOAPDeserializationContext.deserializeMultiRefObjects(SOAPDeserializationContext.java:81)
     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:239)
     at com.sun.xml.rpc.client.dii.CallInvokerImpl.doInvoke(CallInvokerImpl.java:103)
     at com.sun.xml.rpc.client.dii.BasicCall.invoke(BasicCall.java:492)
     at com.ail.dhg.poc.business.dao.ContactDAO.getList(ContactDAO.java:255)
     at com.ail.dhg.poc.business.facade.ContactFacade.getList(ContactFacade.java:189)
     at com.ail.dhg.poc.business.AcceptInput.main(AcceptInput.java:72)
java.lang.NullPointerException
     at com.ail.dhg.poc.business.dao.ContactDAO.getList(ContactDAO.java:277)
     at com.ail.dhg.poc.business.facade.ContactFacade.getList(ContactFacade.java:189)
     at com.ail.dhg.poc.business.AcceptInput.main(AcceptInput.java:72)
Message was edited by:
trupti_d

Use lower case letters for your variable names (name, pwd). The code works then.
package com.bluenile.bean;
import java.io.*;
public class Bean1 implements Serializable
private String name="Uname";
private String pwd="Pword";
public String getName()
return name;
public String getPwd()
return pwd;
void setName(String name)
this.name = name;
void setPwd(String pwd)
this.pwd = pwd;
<HTML>
<BODY BGCOLOR="#FFFFFF">
<%@ page language="java" contentType="text/html" %>
<jsp:useBean id="b1" class="com.bluenile.bean.Bean1" />
<ul>
<li>Name : <jsp:getProperty name="b1" property="name" />
<li>Pwd : <jsp:getProperty name="b1" property="pwd" />
</ul>
</BODY>
</HTML>

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

Messy code problem while translating XString to String in OfficeControl

Similar Messages

Maybe you are looking for