Metadata not in Tiger

I just noticed the Metadata JSR has changed from:
"It is intended that this JSR will be delivered as part of the J2SETM "Tiger" release."
to:
"TBD"
Is there a good reason for this?

Maybe the answer is not to do it yourself!Good point! When you're done with the implementation,
if you want to donate it to Sun and we have time
perhaps we can include it in Tiger.Starting now from scratch it would be very hard for anyone to complete it in time for Tiger. Why hasn't anyone started already --- well we all expected Sun to complete it for Tiger and no one wants to duplicate work already being done unless they really have to.
If you really want outside assistance, then it would help if you released information on what progress you have made. What worked (and how well) and perhaps even more useful what didn't work.
Last week I needed to persist a SpringLayout with XMLEncoder, but found that surprisingly this isn't included in 1.4.2 (and due to a defect in the API is rather difficult). I produced a solution, compared notes with Philip Milne (the author of both) and we now have a better solution than either of us had before. Ideally this code (or something derived from it) should now end up in Tiger. So I don't have a problem with contributing work.
Clearly sharing the VM is a much bigger task. You need to start by asking for help.

Similar Messages

Can not update tiger and safari does not start

Hi everybody,
I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
Any ideas?? Thanks...
Crobus

Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
Joe

Metadata not writing to jpgs

We keep all of our photos on a Windows Home Server 2011 shared folder.
Previously, we kept all our photos in a WHS v1 shared folder and it did not exhibit these issues.
The issue:
Metadata not writing to jpgs
We manage all our photos with Adobe Lightroom 3 and it is set to write metadata to a file immediately, which it does intitally or after a new import (We
edit our photos with ratings first, which writes to the file).
Any change after the first metadata write the "!" or "Up Arrow" appears and indicates that metadata has been changed externally. Even after you select
overwrite settings the "!" or "Up Arrow" stays.
If we select a batch set of photos and right click and navigate to Save Metadata...Lightroom will try to write and finish, but none of the changes get
applied to the photo.
Metadata will write if we manually save metadata to each individual file, but the "!" or "Up Arrow" still appears.
If the files are located on a local drive, Lightroom will continue to make metadata changes to the file.
I feel this is a permissions issue. Has anything regarding file permissions changed from WHS v1 to WHS 2011?
Homegroup on WHS 2011 was turned on, but is now disabled.
Any thoughts on how Lightroom gain the proper permissions to keep writing to a file?
Also, since I turned off Homegroup there are permissions for a user Account Unknown. Should this be there?

LR is accessing the file system with the credentials of your user account - so the first step is to verify that your user account has the proper permissions on your WHS (usually FullControl on the share and Read, Write, Modify on NTFS permissions).
I'm not familiar with WHS but I think Homegroup is the workgroup that hosts your user accounts - I would turn this back on then you should see the name of that Account Unknown user

Metadata not displaying properly in movie list view 12.1.0.50

Has anyone had issues with metadata not displaying properly in iTunes iTunes 12.1.0.50?
Seems since the last update or maybe even before that the metadata is not displaying properly in the movies/list view window. All seems fine in the movies window with the display, nice art work along with all the metadata which I've been adding with the Subler app. Been using this app a long time and it has always been fine.
As can be seen in the attached screen shot, the titles of the lower entries are missing and the director information shows where the artists should be.
When I got to get info everything is as it should be. Any solutions out there?

I had been experiencing this very same problem, and it drove me crazy. Luckily, after searching for the answer on multiple forums, I found a solution. MetaX is a program designed specifically for tagging iTunes movies. Not only can you manually input all the required information, but you can also automatically input all the information from outside sources from within the program. It worked beautifully for me with my copy of Donnie Darko, which I ripped using HandBrake.

Rscrm_bapi ERROR : 'Report Metadat not complete' !!

hi Experts,
While executing rscrm_bapi to execute the query in the background I am getting the following error:-
"<b><i>Report Metadata not complete</i></b>"
Please help me to find out where I went wrong and also guide me to solve the problem.
Thanks in advance.

Hi,
Unlike in BW3.5 Dynamic variable selection is not supported in BI7.0.Please check the note below
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=973676&nlang=EN&smpsrv=https%3a%2f%2fwebsmp208%2esap-ag%2ede
Regards
Chandru

Exif metadata not displayed in Metadata panel & searching

Is there a way to customize the exif and/or IPTC data shown in the Metadata panel in LR 5?
And is there a way to search and/or filter on metadata not in that panel?
I needed to find some photos that have the exif category "art filter" and I cannot search for the value in that field in LR, nor does that field show up in the metadata panel. I can see it with J. Friedl's metadata plugin, or in GraphicConverter, so I know it's there. I tried searching on the text, but LR doesn't find it. What I'd really love is the feature where you have the little arrow by the metadata value in the panel and click it to filter by that criteria.
Is there a way to get LR to recognize and display other exif or IPTC data?

I'm not sure which metadata field you want to search -- is it the IPTC field "Category"? That field is displayed in Metadata > IPTC panel in the right column:
Unfortunately, that field is not searchable using LR's text search filter or smart collections.
In general, to view and search metadata fields not fully handled by LR, you've got to use a third-party plugin:
- Metadata Extensions makes additional fields that LR knows about searchable using the filter bar and smart collections.
- ExifMeta makes nearly all metadata fields viewable and searchable in LR.
- Data Explorer lets you more quickly view, search, and browse more of the fields that LR knows about.
- Any Filter lets you search any field LR knows about, writing boolean search queries similar to smart collections.
These plugins have different capabilities and are optimized for different use cases.

WSDL Metadata not available to create the proxy, either Service instance or ServiceEndpointInterface com.microsoft.bingads.campaignmanagement.ICampaignManagementService should have WSDL information

package com;
import java.rmi.*;
import com.microsoft.bingads.*;
import com.microsoft.bingads.campaignmanagement.*;
public class AdExtensions   {
    static AuthorizationData authorizationData;
    static ServiceClient<ICampaignManagementService> CampaignService;
    private static java.lang.String UserName = "chandan-ai";
    private static java.lang.String Password = "Algo1234";
    private static java.lang.String DeveloperToken = "BBD37VB98";
    private static long CustomerId = 9548596;
    private static long AccountId = 38360461;
    public static void main(java.lang.String[] args) {
        try
           authorizationData = new AuthorizationData();
            authorizationData.setDeveloperToken(DeveloperToken);
            authorizationData.setAuthentication(new PasswordAuthentication(UserName, Password));
            authorizationData.setCustomerId(CustomerId);
            authorizationData.setAccountId(AccountId);
        //      String namespace ="https://bingads.microsoft.com/CampaignManagement/v9";
            // String url ="https://api.sandbox.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?wsdl";
       CampaignService = new ServiceClient<ICampaignManagementService>(
                        authorizationData,ApiEnvironment.SANDBOX,
                        ICampaignManagementService.class);
             ArrayOfCampaign campaigns = new ArrayOfCampaign();
             Campaign campaign = new Campaign();
             campaign.setName("Winter Clothing " + System.currentTimeMillis());
             campaign.setDescription("Winter clothing line.");
             campaign.setBudgetType(BudgetLimitType.MONTHLY_BUDGET_SPEND_UNTIL_DEPLETED);
             campaign.setMonthlyBudget(1000.00);
             campaign.setTimeZone("PacificTimeUSCanadaTijuana");
             campaign.setDaylightSaving(true);
             campaign.setDailyBudget(52.00);
             campaigns.getCampaigns().add(campaign);
          ArrayOflong campaignIds = addCampaigns(AccountId, campaigns);
          printCampaignIdentifiers(campaignIds);
         } catch (Exception ex) {
             // Ignore fault exceptions that we already caught.
             if ( ex.getCause() instanceof AdApiFaultDetail_Exception ||
                  ex.getCause() instanceof EditorialApiFaultDetail_Exception ||
                  ex.getCause() instanceof ApiFaultDetail_Exception )
             else
                 System.out.println("Error encountered: ");
                 System.out.println(ex.getMessage());
                 ex.printStackTrace();
     // Adds one or more campaigns to the specified account.
     static ArrayOflong addCampaigns(long accountId, ArrayOfCampaign campaigns) throws RemoteException, Exception
       AddCampaignsRequest request = new AddCampaignsRequest();
         // Set the request information.
         request.setAccountId(accountId);
         request.setCampaigns(campaigns);
         System.out.println(request.getCampaigns() + "\n"+ request.getAccountId());
         return CampaignService.getService().addCampaigns(request).getCampaignIds();
     // Prints the campaign identifiers for each campaign added.
     static void printCampaignIdentifiers(ArrayOflong campaignIds)
         if (campaignIds == null)
             return;
         for (long id : campaignIds.getLongs())
             System.out.printf("Campaign successfully added and assigned CampaignId %d\n\n", id);
when running this program i am getting error
WSDL Metadata not available to create the proxy, either Service instance or ServiceEndpointInterface com.microsoft.bingads.campaignmanagement.ICampaignManagementService should have WSDL information
javax.xml.ws.WebServiceException: WSDL Metadata not available to create the proxy, either Service instance or ServiceEndpointInterface com.microsoft.bingads.campaignmanagement.ICampaignManagementService should have WSDL information
   at com.sun.xml.internal.ws.client.WSServiceDelegate.getPort(Unknown Source)
   at com.sun.xml.internal.ws.client.WSServiceDelegate.getPort(Unknown Source)
   at javax.xml.ws.Service.getPort(Unknown Source)
   at com.microsoft.bingads.internal.ServiceFactoryImpl.createProxyFromService(ServiceFactoryImpl.java:117)
   at com.microsoft.bingads.ServiceClient.getService(ServiceClient.java:94)
   at com.AdExtensions.addCampaigns(AdExtensions.java:91)
   at com.AdExtensions.main(AdExtensions.java:49)


Hello.
Please make sure you have the correct dependency versions e.g. cxf-rt-frontend-jaxws version 3.0.2. You can find a list of all dependencies for the Bing Ads Java
SDK here:http://mvnrepository.com/artifact/com.microsoft.bingads/microsoft.bingads/9.3.2-beta
If you create a Maven project e.g. in Eclipse, the dependencies are included automatically.
I hope this helps!

Image Metadata Not Displaying in Leopard

Since upgrading my iMac's Tiger installation to Leopard, I've noticed that the More Info section in the Get Info window no longer displays a selected image's dimensions. I just get two dashes. Also, image dimensions aren't displayed underneath the filename if I turn on "Show item info" in the Finder's view options. Both of these features work correctly on my old 12" PowerBook.
I'm curious to know if anyone else has come across this problem? I did a clean install of Leopard on my PowerBook but did an upgrade on my iMac.

The metadata for the more advanced info won't display if the items aren't indexed by Spotlight. So, is Spotlight working correctly? Are the items perhaps not showing up when you do a search? If that is the case you may have the problem I did with an upgrade install, where Spotlight did not index a batch of files because of permissions problems. I eventually gave up and did an erase and install and then used Migration Assistant to bring my stuff back in.
Francine
Francine
Schwieder

White Balance Metadata not showing in Adobe Bridge CS6

Hi there, I am running Bridge CS6 on a Mac, and use Canon 5D and 5DMark 111 cameras. I have an issue with Bridge which I can not seem to figure out. Whether I shoot Raw or JPG and I am trying to do some testing for white balance, once I open the images in Bridge, in the little icon panel just below the folders/favourites panel etc I can see the f stop info, speed, metering , ISO etc, but the only icons I get for WB are if use auto - then I see AUTO. But when I do a manual WB like 'cloudy', 'tungsten', or 'shade' etc all I get are the symbols for 'Custom" or "Manual". How do I get the actual symbols for what type of WB i've chosen to show up?
I have purged the Cache - both in the individual folder and the overall Cache in preferences. I have checked that all the boxes are ticked in the preferences panel for the Metadata. So not sure what else to do.
Cheers D

Ok thanks for that, at least I wont be chasing my tail.
I did install the DNG converter 8.3 but I still NEF files as a NEF icon. Any clues to what I may not be doing right there?

Printing notes in Tiger

The last "I can't print notes from iCal, just headers, which is stupid" post mentioned that they were running Panther. Has there been any fix for Tiger, so that I can print the notes?

the only solution i have found is to change font size to times 12 and be aware of how i lay things out, eg unnecessary returns etc, that take up real estate
it is a shortfall of the program. i sent them a feedback suggestion.....but no one listens to me

Airport express works with windows xp but not OS Tiger

Hi all
I’m a troubled man.
I have recently bought a new Mac pro along with an airport express. I am a first time user of Mac’s.
Here is my problem.
I use a DSL modem and my airport express is connected with the LED indicator in solid green. When I try to connect using my user name and password the “searching for POPPE sever appears at the top of my screen.” And after a few seconds “could not find POPPE server. This happens all the time. I tried to get air tunes working but itunes could not detect my airport express.
Now since I’m an engineer I needed to run auto cad on my Mac so I downloaded Bootcamp, partitioned my Macpro hard drive and installed windows XP on my Mac book pro and to my surprise windows xp found my airport and connected to the server straight away. So I experimented and download the xp version of itunes and what do you know the xp version of itunes detected my airport express and everthing worked fine for Windows! This suggests to me that the problem lies with the mac software as the airport express is working fine. Whats going on! I do not understand.
When I go back to tiger it sees my airport but cannot connect. I run the airport assistant but it cannot detect my airport. I run the utility airport program but it cannot see my airport express. I go back to windows XP everything works fine???????
If you can come up with a solution to this strange problem I would be very grateful.
Thanks

The user name and password may be just fine but the dialer software for OS X may be quirky to the point where it doesn't work with your modem through an Airport connection. My recommendation is to try uninstalling the DSL dialing software from the computer and setting up the Express to do the dialing for you. Your computer connection then becomes straight Ethernet.
If that doesn't work, have you checked to see if there's a newer version of the OS X dialing software available?

Will not read tiger software

I recently bought tiger to upgrade from panther and my imac will not read the software disk. it may read it once in every ten tries but after having to restart the computer it will not read it. So I have been unable to install it. can anyone help?
imac g4 Mac OS X (10.3.9)

What exactly do you mean by, "will not read the software disk?" Do you mean it won't start up from the DVD? Do you mean you cannot list the files on the DVD?
Does the disc have a black label with large gray "X" or does it have a gray label? The latter is an OEM disc that can only be used with the computer model with which it came. Does the DVD have the word Upgrade printed on the label?
If you are trying to boot from the DVD are you doing it correctly? Insert disc into the optical drive and wait until it mounts on the Desktop. Restart the computer and after the chime press and hold down the "C" key. Wait for the gray startup screen to appear. Release the key when the spinning gear appears beneath the dark gray Apple logo.

Save Metadata not working - please help!

Hi there,
I just purchased LR2 tonight and have imported files from an external hard drive. They are jpgs. I've rated various images and made adjustments in the Develop screen. When I go to manually Save Metadata it tells me "'Writing XMP Metadata' did not complete successfully". When I go to "Edit a photo in CS3" and I choose to "Edit a copy with LR adjustments", I get "Lightroom was unable to prepare the selected file at /Volumes/PERSONAL/ Photos/2009/2009_05_Mother's_Day/2009_05_Everyday_00025.JPG for editing. It will not be opened."
I've tried starting a new catalog, I've tried moving files from my external to my hard drive and importing from there and nothing is working. I've checked the 'Automatically write changes to XMP' in the Lightroom Catalog Settings (I'm on a Mac). I'm THIS close to losing my mind. Has anyone experienced this before? What am I missing? Obviously, I'm a beginner, so any help would be greatly appreciated.
Wendy

Wendy-
It's going to be all right.... for one, writing Metadata to JPEGs is not going to produce sidecar files, and your catalog will track all metadata changes and edits, anyway.
Now, as to the other problem, the folder containing your images, or its parent folder may be locked or have permissions set wrong. Check with Get Info on each relevant folder in the hierarchy.
Also try renaming the image to a nice short name. The file path as a whole is a lot longer than any on my Mac, and possibly poses a problem.
best of luck!

Why is metadata not showing in CS3?

Hi,
Having just upgraded Mac 0S10.4 Macs from CS2 to CS3 the metadata on some files is no longer displaying in Photoshop 10.01. The files that are affected seem to have been created in CS2 for Windows. Can see the metadata in Bridge, Preview and Graphic Converter but have no idea how to get it to display in Photoshop. (Its not a Mac OS10.4 issue because it doesn't work in Leopard either.)
If anyone has any ideas they would be very gratefully received!!!
Thanks!
Tippareth
PS: If the image is opened and saved in Preview the metadata will then display in Photoshop

Thanks Rabbitman,
Good to hear I'm not the only one with this problem but concerned that no one else seems to know of it or has answered it yet. If anyone has any ideas it would be great to hear them, or perhaps if it is a known bug in Photoshop CS3 it would be good to know that too!
Thank you,
Tippareth

RIFF Metadata not showing in Windows Explorer

Hi -
I've been testing CS6 for inputting Metadata into the RIFF and BWF headers, and then opening them up in Audition 3.0.1 to see if the mapping is the same, or, if any fields are missing across products.
One thing I've discovered is that when I add metadata in CS6 and save the file, the file information (from the RIFF fields) does not display in Windows Explorer.
However, if I open the same file in Audition 3.0.1, the metadata is there, and if I re-save the file in Audition with a different name, the metadata does display in Windows Explorer.
Is this a bug, or, am I doing something wrong in CS6?
Thanks!
Allison

ensure you have some image in your "Camera Roll". Take a picture then plug it back. if still didn't show use your "Scanner and Camera Wizad".

Metadata not in Tiger

Similar Messages

Maybe you are looking for