Method execute from the Guided Procedure
Hi All:
I have a web dynpro application that has a view Evaluation and this one has a embed view from another component. I´m using guided procedures and setting in the execute method a parameter that is linked to the embed view.
The problem is that in the view Evaluation, when calls DoInit() I´m sending these parameter to the embed view but I´m not getting any value at that moment. These means that the execute method occurs after the DoInit().
Someone knows in what sequence the methods are call, execute and Doinit(). Where can I set the parameter for the embed view so the execute method had been already call and the parameter set before it call the DoInit method.?
Thanks, regards
Hi
I have two components component A with wiewA and component B with ViewB. The view B is embed in view A.
The view A has the call to the GP. I import the view B and I bind the interface from that componentB with the component Controller of the component A and this one to the view A.
and the view is linked to the Inerface Controller where is the execute method.
In the wdDoinit of the view A I´m setting the context values of the parameters I want to send to the view B. And in the wdDoInit of the view B, I´m calling a method that fills a table according to the parameter.
Thanks for the help
Similar Messages
-
Default email subject for Adobe Form from Netweaver Guided Procedure
Hi everyone.
When we generate an Adobe form from a Netweaver Guided Procedure, a default subject of "Interactive Form {xxxxxxxx}" is used where xxxxxxxx is the Process ID of the Guided Procedure. Is this default subject configurable? Where can I change it?
If we define a custom email template for the form, the subject of the email becomes our custom subject concatenated with the Process ID. Where is it defined that the Process ID must be included in the email subject?
Thanks,
.. CraigHello,
I have no experience regarding the table of pictures, but you could try a workaround if you don´t insist of displaying the images. You could attach the pictures as attachments (you know, the little attachments icon on the left in your Reader). The ABAP coding for this can be found in SE38 FP_* and when you check the descriptions you should be able to find the one working with the attachments.
Would be better than nothing I guess,
Otto -
I can't change channels by typing in a number or selecting it from the guide
Good morning,
Yesterday we noticed that we are no longer able to change the TV channels by typing in the numbers or selecting a channel from the guide. When we attempt to change a channel one of these ways, it acts like the channel is about to change but then it just stays on the channel we are already on. The only way we can change the channel is by hitting the up or down button. Did we accidentally change a setting or is their something wrong with the box. Help...Please!!!
Thanks,
StephReboot the box.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
The method clone() from the type Object is not visible
Hi,
This is my 1st post here for a few years, i have just returned to java.
I am working through a java gaming book, and the "The method clone() from the type Object is not visible" appears, preventing the program from running. I understand "clone" as making a new copy of an object, allowing multiple different copies to be made.
The error occurs here
public Object clone() {
// use reflection to create the correct subclass
Constructor constructor = getClass().getConstructors()[0];
try {
return constructor.newInstance(new Object[] {
(Animation)left.clone(),
(Animation)right.clone(),
(Animation)deadLeft.clone(),
(Animation)deadRight.clone()
catch (Exception ex) {
// should never happen
ex.printStackTrace();
return null;
}The whole code for this class is here
package tilegame.sprites;
import java.lang.reflect.Constructor;
import graphics.*;
A Creature is a Sprite that is affected by gravity and can
die. It has four Animations: moving left, moving right,
dying on the left, and dying on the right.
public abstract class Creature extends Sprite {
Amount of time to go from STATE_DYING to STATE_DEAD.
private static final int DIE_TIME = 1000;
public static final int STATE_NORMAL = 0;
public static final int STATE_DYING = 1;
public static final int STATE_DEAD = 2;
private Animation left;
private Animation right;
private Animation deadLeft;
private Animation deadRight;
private int state;
private long stateTime;
Creates a new Creature with the specified Animations.
public Creature(Animation left, Animation right,
Animation deadLeft, Animation deadRight)
super(right);
this.left = left;
this.right = right;
this.deadLeft = deadLeft;
this.deadRight = deadRight;
state = STATE_NORMAL;
public Object clone() {
// use reflection to create the correct subclass
Constructor constructor = getClass().getConstructors()[0];
try {
return constructor.newInstance(new Object[] {
(Animation)left.clone(),
(Animation)right.clone(),
(Animation)deadLeft.clone(),
(Animation)deadRight.clone()
catch (Exception ex) {
// should never happen
ex.printStackTrace();
return null;
Gets the maximum speed of this Creature.
public float getMaxSpeed() {
return 0;
Wakes up the creature when the Creature first appears
on screen. Normally, the creature starts moving left.
public void wakeUp() {
if (getState() == STATE_NORMAL && getVelocityX() == 0) {
setVelocityX(-getMaxSpeed());
Gets the state of this Creature. The state is either
STATE_NORMAL, STATE_DYING, or STATE_DEAD.
public int getState() {
return state;
Sets the state of this Creature to STATE_NORMAL,
STATE_DYING, or STATE_DEAD.
public void setState(int state) {
if (this.state != state) {
this.state = state;
stateTime = 0;
if (state == STATE_DYING) {
setVelocityX(0);
setVelocityY(0);
Checks if this creature is alive.
public boolean isAlive() {
return (state == STATE_NORMAL);
Checks if this creature is flying.
public boolean isFlying() {
return false;
Called before update() if the creature collided with a
tile horizontally.
public void collideHorizontal() {
setVelocityX(-getVelocityX());
Called before update() if the creature collided with a
tile vertically.
public void collideVertical() {
setVelocityY(0);
Updates the animaton for this creature.
public void update(long elapsedTime) {
// select the correct Animation
Animation newAnim = anim;
if (getVelocityX() < 0) {
newAnim = left;
else if (getVelocityX() > 0) {
newAnim = right;
if (state == STATE_DYING && newAnim == left) {
newAnim = deadLeft;
else if (state == STATE_DYING && newAnim == right) {
newAnim = deadRight;
// update the Animation
if (anim != newAnim) {
anim = newAnim;
anim.start();
else {
anim.update(elapsedTime);
// update to "dead" state
stateTime += elapsedTime;
if (state == STATE_DYING && stateTime >= DIE_TIME) {
setState(STATE_DEAD);
}Any advice? Is it "protected"? Is the code out-of-date?
thankyou,
Lance 28Lance28 wrote:
Any advice? Is it "protected"? Is the code out-of-date?Welcome to the wonderful world of Cloneable. In answer to your first question: Object's clone() method is protected.
A quote from Josh Bloch's "Effective Java" (Item 10):
"A class that implements Cloneable is expected to provide a properly functioning public clone() method. It is not, in general, possible to do so unless +all+ of the class's superclasses provide a well-behaved clone implementation, whether public or protected."
One way to check that would be to see if super.clone() works. Their method uses reflection to try and construct a valid Creature, but it relies on Animation's clone() method, which itself may be faulty. Bloch suggests the following pattern:public Object clone() throws CloneNotSupportedException {
ThisClass copy = (ThisClass) super.clone();
// do any additional initialization required...
return copy
if that doesn't work, you +may+ be out of luck.
Another thing to note is that Object's clone() method returns a +shallow+ copy of the original object. If it contains any data structures (eg, Collections or arrays) that point to other objects, you may find that your cloned object is now sharing those with the original.
Good luck. -
Can I use SubPanels to display and run multiple executables from the same GUI?
I have two Labview executables that performs some A/D I/O, each using an independent USB-6008. I would like to run both of these executables from a single UI. Is this possible usin SubPanels? Or some other method?
I found KB regarding exe's and VI Server but can't seem to get the suggested workarounds implemented.
http://digital.ni.com/public.nsf/allkb/8545726A00272EB0862571DA005B896C?OpenDocument
I am using Labview2009
Thanks
Dan
Solved!
Go to Solution.DBerry wrote:
No, of course I am not sure yet. I have only begun testing this method.
Not sharing common hardware (separate USM-6008s).
Here is the whole picture:
I have developed a top-level VI that performs Daqmx IO using a single USB-6008. The top-level VI references a Project Daqmx Task that points to the desired 6008. I would like to create a single UI that uses this top-level VI to control twoUSB-6008s simultaneously. I thought I could build the top-level VI into 2 separate exes, where the only difference between the exes is the hardware it points to (one exe to each of the 6008s). But I have been unsuccessful at running these two exes within a single UI. I attempted use subpanels on a tab control to do this but I am unable to obtain a reference to the top-level vis once they have been built into an exe. I have also tried building a dll and exporting the top-level vi from the dll build but i can't seem to get that to work either. In both of these cases my Open VI reference function returns errors (Error 1445). I am aware of the changes in referencing VIs from within an exe/dll since LV8.2 - http://digital.ni.com/public.nsf/allkb/8545726A00272EB0862571DA005B896C
The link seems to suggest that I should be able to obtain a reference to the top-level vi within the dll but I can't get it to work.
So I then moved on to the above method (making all the subvis reentrant). I just haven't figured this all out yet.
If you have suggestions on other problems I may run into please share. I think I can eliminate my FGs but haven't gotten back to this yet.
Thanks
Dan
When I am designing apps of the type you described I have kept the ned goal in mind from the begining since of the issue you are mentioning. I also don't want to tell you to throw it all away and start over. So with that in mind I have been looking at your posts and only offering the least destrutive ideas first. With that in mind I would like to invite yo uto look at the code i posted in this thread (reply #18 has a zip).
That code shows how to realize un-dockable GUI regions but it passes the ref of the top level VI to a reentrant VI it instanciate for each undockable region. It may have enough hints and technique to give you some ideas that will work for you.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Runtime Exception occured while test the Guided Procedure Webservice
Hello All,
As per my scenario, i have to get the process status in guided procedure by using the java application thro default guided procedure web service. Before starting, i have test the web service by the web service navigator. I took default web service as GPRuntimeFacadeWS in the list. I have selected this web service and method GetProcessResult, gave the input parameters for ProcessInstanceGUID after that i am getting the result like "com.sap.caf.eu.gp.model.gpws.exception.ProcessRuntimeException". Before testing i have created one process in GP. I am not able to see the result of the web service. This is exception occured while iam working in the EP7.0 SP17. Eventhough iam working in EP7.0 SP13 also had i got the same exception like "test.ProcessRuntimeException".
Please help me for this.
Thanks
Prakash THi Salvatore,
This is a very wide error. You did not provided any other info as specified by Michael. Just a wild guess, this sort of error occurs generally when classpath or java_home properties are not set correctly. But, as i said it is very wide, some more info will be useful.
Regards
Chander Kararia -
Unable to get the data from the stored procedure
Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date date;
v_end_date date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id stage_bill.batch_id%TYPE;
v_beginning_service_date stage_bill.beginning_service_date%TYPE;
v_bill_id stage_bill.bill_id%TYPE;
v_bill_method stage_bill.bill_method%TYPE;
v_bill_number stage_bill.bill_number%TYPE;
v_bill_received_date stage_bill.bill_received_date%TYPE;
v_bill_status stage_bill.bill_status%TYPE;
v_bill_type stage_bill.bill_type%TYPE;
v_change_oltp_by stage_bill.change_oltp_by%TYPE;
v_change_oltp_date stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code stage_bill.client_datafeed_code%TYPE;
v_client_id stage_bill.client_id%TYPE;
v_created_date stage_bill.created_date%TYPE;
v_date_of_incident stage_bill.date_of_incident%TYPE;
v_date_paid stage_bill.date_paid%TYPE;
v_deleted_oltp_by stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill stage_bill.duplicate_bill%TYPE;
v_ending_service_date stage_bill.ending_service_date%TYPE;
v_event_case_id stage_bill.event_case_id%TYPE;
v_event_id stage_bill.event_id%TYPE;
v_from_oltp_by stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status stage_bill.oltp_bill_status%TYPE;
v_review_status stage_bill.review_status%TYPE;
v_schema_name varchar(50);
v_Load_date date;
v_Load_user varchar(50);
v_Row_Effective_Date date;
v_Row_End_Date date;
Begin
if p_data_load_date is null then
select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
LOOP -- cursor c_get_data loop begin
FETCH c_get_data
INTO
v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
V_Row_Effective_Date,
v_Row_End_Date;
EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
END LOOP;
CLOSE c_get_data;Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date DATE;
v_end_date DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
NVL (p_data_load_date, SYSDATE) - 1
INTO v_start_date,
v_end_date
FROM DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING (SELECT *
FROM stage_bill
WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
INSERT (batch_id,
beginning_service_date,
bill_id,
bill_method,
bill_number,
bill_received_date,
bill_status,
bill_type,
change_oltp_by,
change_oltp_date,
client_datafeed_code,
client_id,
created_date,
date_of_incident,
date_paid,
deleted_oltp_by,
deleted_oltp_date,
duplicate_bill,
ending_service_date,
event_case_id,
event_id,
from_oltp_by,
oltp_bill_status,
review_status,
schema_name,
load_date,
load_user,
row_effective_date,
row_end_date
VALUES (a.batch_id,
a.beginning_service_date,
a.bill_id,
a.bill_method,
a.bill_number,
a.bill_received_date,
a.bill_status,
a.bill_type,
a.change_oltp_by,
a.change_oltp_date,
a.client_datafeed_code,
a.client_id,
a.created_date,
a.date_of_incident,
a.date_paid,
a.deleted_oltp_by,
a.deleted_oltp_date,
a.duplicate_bill,
a.ending_service_date,
a.event_case_id,
a.event_id,
a.from_oltp_by,
a.oltp_bill_status,
a.review_status,
'HRI',
SYSDATE,
'ETLPROCESS001',
v_start_date,
NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter -
How to get an UPDATABLE REF CURSOR from the STORED PROCEDURE
using C# with
ORACLE OLE DB version: 9.0.0.1
ADO version: 2.7
I returns a REF CURSOR from a stored procedure seems like:
type TCursor is ref cursor;
procedure test_out_cursor(p_Dummy in varchar, p_Cur out TCursor) is
begin
open p_Cur for select * from DUAL;
end;
I create an ADO Command object and set
cmd.Properties["IRowsetChange"].Value = true;
cmd.Properties["Updatability"].Value = 7;
cmd.Properties["PLSQLRSet"].Value = 1;
cmd.CommandText = "{CALL OXSYS.TEST.TEST_OUT_CURSOR(?)}";
and I use a Recordset object to open it:
rs.Open(cmd, Missing.Value,
ADODB.CursorTypeEnum.adOpenStatic,
ADODB.LockTypeEnum.adLockBatchOptimistic,
(int) ADODB.CommandTypeEnum.adCmdText +
(int) ADODB.ExecuteOptionEnum.adOptionUnspecified);
The rs can be opened but can NOT be updated!
I saved the recordset into a XML file and there's no
rs:baseschema/rs:basetable/rs:basecolumn
attributes for "s:AttributeType" element.
Any one have idea about this?
thanks very muchIt is not possible through ADO/OLEDB.
Try ODP.NET currently in Beta, it is possible to update DataSet created with refcursors. You need to specify your custom SQL or SP to send update/insert/delete.
As I remember there is a sample with ODP.NET Beta 1 just doing this. -
Firefox won't let me run and executable from the website-it wants to save it
Looks like I lost all this information when I clicked to install the troubleshooter???
again-- problem is I deleted old Internet Explorer and tried to install I.E. 8. With Firefox, I can't click download and choose run. When I click download I can only save.
The saved download doesn't produce a file that works (it just tries to install I.E. , cleans off old files and restarts the PC OVER AND OVER.)
I would like the choice to RUN a file instead of saving but I can't find out how to get this option back.
I disabled all plugins, add ons, looked for possible limiting causes in Firefox to disable. STILL--I have NO CHOICE.
Maybe this plea for help won't fix my problem and I will have to REPAIR windows--hate to risk it--I would have to back everything up, etc.
Hopefully a simple answer to this question will solve my problem.
Thank you to all who consider my question. I appreciate your time.
LibbyHi--
Thanks for the response. I was sure I used to have the choice to '''run '''or '''save '''when I started using Firefox and somehow I lost it with one of my adjustments. Forgot how or what I did!
Before going back to Microsoft to try that I.E. program file again, I tried one more time to run it. That was the 5th time I tried to install I.E. from the saved file --and it worked!
However, after that I tried to download an executable file from malwarebytes--- with and without my Kaspersky internet security program on--- the file RAN automatically anyway instead of insisting on SAVING!
Maybe this was a microsoft issue?
I am relieved that all is settled. Always try things 3 or more times is the rule with computers, right?
But thanks for the tips--I may need them someday. Likewise the Safe mode w/ network support tip.
ALSO--The page you referred me to was one I hadn't found with my own searching--it was much much better than the others. I bookmarked it.
Thanks again... -
How to measure a pdf file from the guides?
Hi,
I need to check 200 pdf files before go to print,
essentialy the size
So i wanna know if there are an easy way to measure the pdf file from the cut guides
using indd cs6 or Illustrator
thanksThanks guys
The thing is that i dont have the indd file
I just have a lot of PDF files and i need to check all files gone correct for print
what Im doing is open PDF file in Illustrator and with the measure tool check the size of the crop marks
the "page size" in Acrobat includes the bleed area so i can´t be sure if the file gone correct
Im looking for a fast way to check that.
The Adobe measuring tool is basically the same as im doing in Illustrator
and in the Preflight profile i can´t find the page size
I guess there's no faster way
thanks a lot Danny Whitehead and John Mensinger for your interest
and sorry about the bad english -
If the result from the stored procedure returns 0 rows I get this error returned:
If the result from the following stored procedure returns 0
rows I get this error returned:
faultCode:Server.Processing faultString:'Variable transfers
is undefined.' faultDetail:''
How can I get round this?Well if I try this in a cfm page:
<cfstoredproc procedure="GetTransfers"
datasource="datasource" returncode="true">
<cfprocparam type="in" cfsqltype="CF_SQL_VARCHAR"
value="4">
<cfprocparam type="in" cfsqltype="cf_sql_date"
value="12/09/2006 08:42:00">
<cfprocparam type="in" cfsqltype="cf_sql_date"
value="12/09/2008 08:42:00">
<cfprocresult name="transfers">
I get an error like:
[Macromedia][SQLServer JDBC Driver][SQLServer]Procedure or
function 'GetTransfers' expects parameter '@fromdate', which was
not supplied.
But this procedure only accepts 3 parameters. -
Compilation process generates a diferent executable from the original
Hello!!
I'm at Guayaquil Equador and I have the next question:
I am working with forms 6i. I have a form backup that a person of tecnical support gave me, including REPARTO.fmb and the REPARTO.fmx, both have the same date and hour equal to 20/04/2011 16:59.
But if I test the compiled form in production it woks fine but if I compile the old .fmb generating a new .fmx; this .fmx has a diferent size from de original, with 4000 bytes less than the original compiled, and then it has some execution errors.
Do you know How those the compilation process works? how is constructed the REPARTO.fmb, this diference and the error could be caused by some environment caracteristics?
Thank you for your help and regards.
Alejandrauser6500532 wrote:
this .fmx has a diferent size from de original, with 4000 bytes less than the original compiledThis is nothing uncommon; there are some things compiled into the form; for example signatures of the database objects you are accessing within your forms (the structure of tables, or the parameters of a certain stored procedure).
So it very much depends on what database schema you are compiling against. So giving you just the form is just one part of the story.
As there is no way you can reverse-engineer your fmx into a fmb there is also no way to tell if your fmx has been built from the fmb you have (except for the file date which can of course be modified by a simple touch ).
So in short there is no way around debugging your form, and see what error is thrown where. If you don't know why a certain error is thrown at a certain point then by all means post a sample here, and someone should be able to assist you.
cheers -
[SOLVED] Question about "loadkeys" from the install procedure
https://wiki.archlinux.org/index.php/In … ard_layout
https://wiki.archlinux.org/index.php/Be … the_keymap
# loadkeys ro_win
They show up as black squares... Even after generating these locales, as per the Beginner's Guide:
[root@archiso ~]# locale-gen
Generating locales...
en_US.UTF-8... done
ro_RO.UTF-8... done
ro_RO.ISO-8859-2... done
Genetation complete.
What do?
PS: I noticed that they're activated with "Alt+Shift". There's no mention in the Install Guide or Beginner's Guide about this. Heh.
Last edited by DSpider (2012-08-24 14:45:34)From the LiveCD (in VirtualBox):
# nano x
<wrote these characters>
# cat x | curl -F "sprunge=<-" http://sprunge.us
And they show up fine: http://sprunge.us/MKBj
ăîşţâ
ĂÎŞŢÂ
Until a better explanation comes along, I've added this info to the BG:
Don't worry if some of the letters show up as white squares or as other symbols. It's probably just the console font missing those glyphs. The glyph codes are correct and if you press the correct keys they will show up fine when (or if) you set up a graphical environment later.
https://wiki.archlinux.org/index.php/Be … the_keymap
I guess I can mark it as solved... -
2 different actions being executed simultaneously through guided procedure
Hi All,
Can you let me know whether it is possible two run 2 different actions embedding 2 different callable objects simultaneously through guided procedure? Please let me know the procedure.
Thanks in advance,
SwaralipiCan any one help me regarding this questions?
-
Query Takes more Time when i execute from the Instant client.
Hi,
Currently in our Env we have some Queries takes more time when we run from the Instant Client.
System Details
OS=Solaris 10 x86 64bit
Oracle 10.2.0.4
Client Side
$ sqlplus trd_trd_ro/trd_trd_ro@prdba001/TRADE1
SQL*Plus: Release 10.2.0.2.0 - Production on Mon Aug 9 16:26:25 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
SQL> set timing on
SQL> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:01:54.19
SQL> Disconnected from Oracle Database 10g Release 10.2.0.4.0 - ProductionSame Query running on Server Side
^C130-oracle@prdba001 txt: sql
Database: trd_trd_owner/trd_trd_owner@prdba001/TRADE1
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Aug 9 17:15:18 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production
trd_trd_owner@TRADE1> set timing on
trd_trd_owner@TRADE1> select mod(lastinstmessagesequence, 1000000000) LastInstIDSeqNo from tibex_msgseqbyuseralias where useralias='2221';
no rows selected
Elapsed: 00:00:00.12
trd_trd_owner@TRADE1> exitKindly help me what could be the Issues.Hi Charles,
Thanks for your Quick response.I pulled the info.
sys@TRADE1> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('bpxr7axhxaqvy',NULL,'ALLSTATS LAST'));
PLAN_TABLE_OUTPUT
SQL_ID bpxr7axhxaqvy, child number 0
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 0 |00:00:00.06 | 6121 |
| 2 | VIEW | | 1 | 21 | 0 |00:00:00.06 | 6121 |
| 3 | UNION-ALL | | 1 | | 0 |00:00:00.06 | 6121 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.05 | 3073 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 30080 | 0 |00:00:00.05 | 3073 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 971 | 0 |00:00:00.01 | 3 |
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 971 | 0 |00:00:00.01 | 3 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 2862 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.01 | 2862 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 1
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 0 |00:00:00.12 | 8545 |
| 2 | VIEW | | 1 | 21 | 0 |00:00:00.12 | 8545 |
| 3 | UNION-ALL | | 1 | | 0 |00:00:00.12 | 8545 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.10 | 5496 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 21056 | 0 |00:00:00.10 | 5496 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 4 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 660 | 0 |00:00:00.01 | 4 |
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 660 | 0 |00:00:00.01 | 4 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.02 | 2862 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.02 | 2862 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
PLAN_TABLE_OUTPUT
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 |
Predicate Information (identified by operation id):
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
SQL_ID bpxr7axhxaqvy, child number 2
select /*+ GATHER_PLAN_STATISTICS */ mod(lastinstmessagesequence, :"SYS_B_0") LastInstIDSeqNo from
tibex_msgseqbyuseralias where useralias=:"SYS_B_1"
Plan hash value: 1955857846
| Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads |
| 1 | SORT GROUP BY NOSORT | | 1 | 21 | 1 |00:00:00.13 | 8476 | 3 |
| 2 | VIEW | | 1 | 21 | 1 |00:00:00.13 | 8476 | 3 |
| 3 | UNION-ALL | | 1 | | 1 |00:00:00.13 | 8476 | 3 |
| 4 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.10 | 5283 | 0 |
|* 5 | TABLE ACCESS FULL | TIBEX_QUOTE | 1 | 21056 | 0 |00:00:00.10 | 5283 | 0 |
| 6 | SORT GROUP BY NOSORT | | 1 | 1 | 1 |00:00:00.01 | 148 | 3 |
| 7 | TABLE ACCESS BY INDEX ROWID| TIBEX_ORDER | 1 | 660 | 150 |00:00:00.01 | 148 | 3 |
PLAN_TABLE_OUTPUT
|* 8 | INDEX RANGE SCAN | TIBEX_ORDER_IDX_OLT | 1 | 660 | 150 |00:00:00.01 | 5 | 0 |
| 9 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 10 | TABLE ACCESS FULL | TIBEX_TSTRADE | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 11 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 12 | TABLE ACCESS FULL | TIBEX_IOIREQUEST | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 13 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 126 | 0 |
|* 14 | TABLE ACCESS FULL | TIBEX_BESTEXREL | 1 | 1 | 0 |00:00:00.01 | 126 | 0 |
| 15 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.02 | 2862 | 0 |
|* 16 | INDEX FAST FULL SCAN | SYS_C0058325 | 1 | 339 | 0 |00:00:00.02 | 2862 | 0 |
| 17 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 31 | 0 |
|* 18 | TABLE ACCESS FULL | TIBEX_EDPPULLORDERS | 1 | 1 | 0 |00:00:00.01 | 31 | 0 |
| 19 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 20 | INDEX RANGE SCAN | SYS_C0058803 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 21 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 22 | INDEX RANGE SCAN | SYS_C0057785 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 23 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 24 | INDEX RANGE SCAN | SYS_C0057827 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 25 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 26 | TABLE ACCESS FULL | TIBEX_DELETEADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 27 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 28 | INDEX RANGE SCAN | SYS_C0058148 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 29 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 30 | INDEX RANGE SCAN | SYS_C0058264 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 31 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 32 | INDEX RANGE SCAN | SYS_C0058516 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 33 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 34 | INDEX RANGE SCAN | SYS_C0058561 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 35 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 36 | INDEX RANGE SCAN | SYS_C0058783 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 37 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 38 | INDEX RANGE SCAN | SYS_C0058977 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 39 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 40 | INDEX RANGE SCAN | SYS_C0058859 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 41 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
|* 42 | INDEX RANGE SCAN | SYS_C0059197 | 1 | 1 | 0 |00:00:00.01 | 1 | 0 |
| 43 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 44 | TABLE ACCESS FULL | TIBEX_CANCELTRDADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
| 45 | SORT GROUP BY NOSORT | | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
|* 46 | TABLE ACCESS FULL | TIBEX_BULKCANCELADMIN | 1 | 1 | 0 |00:00:00.01 | 3 | 0 |
Predicate Information (identified by operation id):
5 - filter("LASTINSTUSERALIAS"=:SYS_B_1)
8 - access("LASTINSTUSERALIAS"=:SYS_B_1)
10 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
12 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
14 - filter(("LASTINSTUSERALIAS" IS NOT NULL AND "LASTINSTUSERALIAS"=:SYS_B_1))
16 - filter("USERALIAS"=:SYS_B_1)
18 - filter("USERALIAS"=:SYS_B_1)
20 - access("USERALIAS"=:SYS_B_1)
22 - access("USERALIAS"=:SYS_B_1)
24 - access("USERALIAS"=:SYS_B_1)
26 - filter(("USERALIAS" IS NOT NULL AND "USERALIAS"=:SYS_B_1))
28 - access("USERALIAS"=:SYS_B_1)
30 - access("USERALIAS"=:SYS_B_1)
32 - access("USERALIAS"=:SYS_B_1)
34 - access("USERALIAS"=:SYS_B_1)
36 - access("USERALIAS"=:SYS_B_1)
38 - access("USERALIAS"=:SYS_B_1)
PLAN_TABLE_OUTPUT
40 - access("USERALIAS"=:SYS_B_1)
42 - access("USERALIAS"=:SYS_B_1)
44 - filter("USERALIAS"=:SYS_B_1)
46 - filter("USERALIAS"=:SYS_B_1)
249 rows selected.
Maybe you are looking for
-
Java to create hyperlinks from database-specified paths
Hi, I�m using Tomcat 5.5/Java 5.0. and Windows 2000 and Internet Explorer 6 I have a network path specified in a MySQL database table (e.g. one path might be: \\Rpfs01\Department\Finance\Public\Requisitions 4000+\req 4005 Sigma.xls) I�d like to query
-
2110 all-in-one not printing all text in documents
My printer has stopped printing all parts of documents. It just seems to skip certain parts of word documents, excel spreadsheets, pdfs, etc. And, if I print the same document more than once, different parts of the document will print, but never the
-
[solved] Running HPGCC on a 64bit install
Hi, I've bought a HP 50g and I'd like to "play" a little with HPGCC but it's precompiled as a 32bit binary. I realize I can run 32bit binaries on a 64 bit install if I install some lib32-* packages, but I don't know which ones to install. Can anyone
-
Odd Vibrate Behaviour after 3.1.2 Update
I saw one other post concerning this issue, and was curious how many others have experienced this 'problem' (or if anyone has stumbled on a 'fix'): Since I updated to 3.1.2, with my iPhone vibrate setting ON, after the 'sound switch' is placed to sil
-
Xerces Sax not parsing a Unicode char
My SaxParser (xerces) is failing when parsing, complaining about Unicode: 0x1d. I am reading from a file (InputSource), and have set the encoding to UTF-8. Is there any way to not parse data in specified xml elements? Without explicitly escaping the