MF41 Error - No operations exist in order X

We tried to reverse a repetitive manufacturing entry via MF41 and received the error message RU008 "No operations exist in order XYZ" - As far as I know, we did not receive any errors at the time that the original confirmation was completed. We did however have to delete and reroll standard costs during the month after the original confirmation was completed. Not sure if MF30 was ran after the new standard costs were released. I'm sure that it is probably tied to the standard cost issues, but would really like to know if there is a different direction that I should be looking at?
Thanks,
Amy

Thanks for the response, but MFBF or MF40 requires that you use MF41 to reverse. MBST or MB1A will not work for repetitive mfg.

Similar Messages

Error ECE_UTL_INVALID OPERATION in Purchase order outbound

Hello
While performing Purchase Order Outbound ECE_UTL_INVALID OPERATION error occurred.
Can anyone help me to resolve this error?
Thanks in Advance,
Kapil

While performing Purchase Order Outbound ECE_UTL_INVALID OPERATION error occurred.
Can anyone help me to resolve this error?Please post the exact error., application release.
Thanks,
JD

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

ERROR: The operation could not be performed because the file can't be accessed or doesn't exist. Please contact your web developer to correct the problem.

Only on one page, the client is receiving this error:
Error - The operation could not be performed because the
file cant be accessed or doesnt exist. Please contact your web
developer to correct the problem.
I tested it with a couple different usernames and a couple different browsers and it works fine on my end.. but none the less it is happening to him. This is the second time it happened to two different clients.
??? Any ideas ??? Anyone else had this happen?

Here's the setup on the two machines in particular...
Machine #1:
XP Pro
Was IE7, now latest FF
No antivirus
Firewall – Windows Firewall, Downloaded AVG free trial ver., but not installed
Machine #2:
XP Pro
IE7
Again, No AV… had Kaspersky… but uninstalled it
Windows Firewall
Maybe that could be of some assistance... not seeing anything that could possibly block or inhibit the ICE. Each machine is independent of the other, separate networks, different locations, JavaScript enabled, no cookie blockers, etc.
....STUMPED!!!

DIServer insert operations for sales orders with error

DIServer insert operations for sales orders with
That even though the insert is inserted DocDueDate DocDueDate it says error.
Subtracting the value of the format 'yyyy-mm-dd', 'yyyy/mm/dd', 'mm-dd-yyyy', 'mm/dd/yyyy' put all reporting
When the input is entered DocDueDate ShipDate also put together ... but I get an error.
The error message 'env: Receiver-10Enter due date [ORDR.DocDueDate] 171AddObject2EEE7D98-AB71-464A-93AB-933F0AD3D4DC'
Purchase order entered into the normal value because the xml is missing or wrong with you.
Please answer all the possibilities that can be resolved
This Xml used.
"<BOM>" +
"<BO>" +
"<AdmInfo>" +
"<Object>oOrders</Object>" +
"</AdmInfo>" +
"<QueryParams>" +
"<DocEntry />" +
"</QueryParams>" +
"<Documents>" +
        "<row>" +
        "<DocType>I</DocType>" +
        "<DocDate>2012-01-11</DocDate>" +
        "<DocDueDate>2012-01-11</DocDueDate>" +
        "<CardCode>CD00001</CardCode>" +
        "<Address>Anymode</Address>" +
        "<DocCurrency>KRW</DocCurrency>" +
        "<Comments>[sales orders] LGU TEST</Comments>" +
        "<TaxDate>2012-01-11</TaxDate>" +
        "<JournalMemo>JournalMemo</JournalMemo>" +
        "<Address2>Addr</Address2>" +
        "<BPL_IDAssignedToInvoice>1</BPL_IDAssignedToInvoice>" +
        "</row>" +
"</Documents>" +
"<Document_Lines>" +
        "<row>" +
        "<ItemCode>ACDT0100ET</ItemCode>" +
        "<Quantity>1</Quantity>" +
        "<Price>5000</Price>" +
        "<DiscountPercent>10</DiscountPercent>" +
        "<WarehouseCode>A100</WarehouseCode>" +
        "<VatGroup>A2</VatGroup>" +
        "</row>" +
"</Document_Lines>" +
"</BO>" +
"</BOM>";

I had the same error change the Date to the format yyyymmdd, and problem solved.

Syntax error (missing operator) in query expression

Hi all
I am creating a couple of pages where a dynamic list is created from an access database and then products from that list are displayed, the user then has the option of clicking more details, this then should pass the KITID over to the details page, However when i click on the details page i get the following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'KitID = Kit 01'.
/classicclocks/Kieninger_gallery.asp, line 21
Here is the code from the page i am building, can anybody see anything obvious here
strKitID = Request.QueryString("KitID")
' If KitID does not exist then redirect to Gallery page
If strKitID = False Then
Response.Redirect("kit_gallerytest.asp")
End If
' SQL Query for specific KitID details only
Dim objRS
Set objRS = Server.CreateObject ("ADODB.Recordset")
' Open new objRS
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = " & strKitID & " ORDER BY KitID"
objRS.Open strSQL, MM_dbConn_STRING,,,adCmdTable
' Get all rows from table and asign values to array for use in form
Do While Not(objRS.EOF)
Images = True
fsImagesArray = objRS.GetRows()
    Const arrKitID = 0
    Const arrImgKitCatalogue = 1
    Const arrKitDescriptionShort = 2
Loop
' Close objConn and objRS
objRS.Close
strSQL = "SELECT * From tblMovements WHERE KitID = " & strKitID
objRS.Open strSQL, MM_dbConn_STRING
thanks
John

String values in a SQL where clause must be wrapped in quotes. Try this:
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = '" & strKitID & "' ORDER BY KitID"

Import new sales order line in existing sales order

Hi All,
I want to import new sales order line in existing sales order using these open Interface tables or APIs.
I did some test but the import request always give me the error message:
You are trying to insert an existing order or update an order that does not exist. Please enter a correct operation code.
Help..
BR,
Edited by: user7993358 on 2011/5/26 下午 8:48

Hi,
The script available in Oracle Note 746796.1 may be of help with your troubleshooting.
Cheers,
Arun

Error while saving the Sales Order

Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.

I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

Error While saving the Production Order

Dear Experts
Pls let me know why am getting the below error while saving the production order after release..
PSFC_STD_LAYOUT does not exist
Message no. SSFCOMPOSER004

Dear,
Please check have you assigned the scheduling profile in work scheduling view of materail master?
Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
Regards,
R.Brahmankar

Error in Conversion of Planned order to Production Order

Hi,
I am getting error while converting the planned order to Production order.
Error is " Scheduling parameters not defined for the production orders"
I have maintained the parameters in Prod-> Shop Floor Control -> Operations -> Scheduling....but after that also the same error is coming.
And also I have maintained in the Capacity Req Planning
Kindly assist me where I can define the scheduling parameters for the production orders in MTO cycle.
Regards
Toshi

Hi ,
My production order has been created ....but now m getting error while releasing it.
Its saying that "No checking rule maintained for operation"
I have maintained the checking rule in OPJK. But still m getting the same error.
Kindly assist me for the above error.
Regards
Toshi

Internal order - Error - Different logical system for order

Hello all,
I try to send IDoc (INTERNAL_ORDER) from system A to system B.
I have done:
- BD64 / WE20 / WE21
But after having customizing I have got following error:
Different logical system for order xxxxxx
Message no. 2075ALE001
Diagnosis
Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
System Response
Internal order xxxxxxx with master system A cannot be distributed in system B.
Procedure
Check customizing for ALE for internal orders.
How to solve this?
My aim is to maintain internal order master data in test system.
Thanks for your help.
David

I have found something.
If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
Then: how to define "master"?

Error in operation level result recording

Hi,
I need held; result recording of inspection type =03 (operation level Quality inspection)
A product manufacture via three operations (10, 20, 30)
All operation quality inspection active let operation no-10, all products reject and confirm as rework.
Next operation level quality record is done but confirmation not allow Reason is operation -10, rework quantity, (Actual quantity is more than planned quantity)
How to add the quantity after reworks for next operation quality inspection?
Pl helps me finding the solution.

Hi,
As per your more clearence , As per Example production order Quanity =1, passes 3 operation10,20,30
Operation=10 require rework as per quality ,
Operation =20 system raise the error message = Operation =10 rework .
If want to operation =10 ok Quantity =1 then system raise error messges =Actual quanity more than planned Quanitity
( 1 Rework + 1 Ok ) .
Supose rework order create and confirm then next 20 & 30 operation how complete .
Real scenerio :- Rework on operation =10 then again Quality check then goes to 20 operation Quality check pass / Rework if rework then again quality pass then goes to next operation level
I hope under stand my problem
Need help- please

Payment run error "No check exists which meets the selection criteria"

I have done a payment run successfully, maintained a variant for the check print program but when I want to display the cheques i get this error: " No check exists which meets the selection criteria"
I have mantained the check lot for the house bank and the ID as well.
What could be the problem? Please help.
Regards
Debra

Hi
I have checked FBZP t. code and the check lots , all seem to be in order. I still have not found out where the problem is.
Thanks Shammi
Regards
Debra

Custom program for availability check and update for existing sale order at Item level(VA02)

Hi,
I came to know Bapi_Saleorder_Simulate can be used for availability check and update an existing sale order.but there is no sample program explaining the process.I have tried this by passing parameters ORDER_HEADER_IN , ORDER_ITEMS_IN ,ORDER_PARTNERS and ORDER_SCHEDULE_EX(for getting details),also i have assigned the sale document number ,custom document type(ZSO) in ORDER_HEADER_IN . while executing the BAPI I am getting the error external number range is not assigned for the document type ZSO . I am confused on seeing this error. It is possible to do availability check for existing sale order using this BAPI. Please explain how to achieve this.It will be really helpful if it is expalained with an example.
Regards,
Shanmuga

Hello, I think you may have been misinformed about this BAPI updating a sales order at item level. As far as I understand it this BAPI can be used to simulate the creation of a sales order which obviously would include and ATP check. This is why it is giving the error because it is simulating creation but you are entering a value in a field that should be automatically generated (i.e. the sales order number). For change the sales order at item level have you looked at BAPI_SALESORDER_CHANGE? I pretty sure this BAPI both updates sales order (header or item level) and can do an ATP first.
Points are always welcome if you feel an answer has been helpful.

MF41 Error - No operations exist in order X

Similar Messages

Maybe you are looking for