Microsoft patches for Office 2007 applications . . . . .

How do I get the MS Office 2007 extensions (.docx, etc) to open and be readable without going to textedit? I have downloaded the Microsoft patches, but apparently they are not being placed in the correct file to automate the process. Can anyone help. Thanks. jn

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office. Please post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Similar Messages

Microsoft Patch for OWA 2007 CRES Secure Mail Recipients

CRES Secure Envelope Recipients attempting to open the CRES Secure Envelope through Microsoft OWA 2007 will need to enable the server side administrative option to disable the HTML/XML filter. Though this HTML filter option will be officially released in the yet-to-be-released Microsoft Exchange 2007 SP1 Rollup 8, Microsoft customers can request an interim patch from Microsoft. How and when to contact Microsoft Customer Service and Support: http://support.microsoft.com/kb/295539

I had this same issue, except I have Symantec mail security not Forefront. It wound up being a line in the adult content filter. For whatever reason, they included "If you received this email" as one of the literal strings. This is probably part
of almost every corporate confidentiality clause I have ever seen!! go figure......
Thanks for the event log hint- since I have the adult content set to delete, I had no good tracking mechanism in Exhange or SMSME. I set email notifications for the future on these.
Brent
I had this same problem, but I have ESET Mail Security Server. in some one case the problem y solved if I attach the "user@domain" in the "white
List". But in many case the problem is continuous. I have Exchange 2007 in MS Windows Server 2003.
Thanks for yours help.

PDFMaker is unavailable in a Microsoft Office 2007 Application after you install (Acrobat 9.0)

From the Adobe Knowledgebase:
> ISSUE
>
> PDFMaker is unavailable in Microsoft Office 2007 applications such as
> Access, Excel, PowerPoint and Word after you install an Adobe Acrobat
> 9.0 product.
See
for recommended fixes.

Ahhh...the link you gave answers that question at rhe top of the page. It is Adobe's recommended tip. Too bad Office 2007 does not install PDF Maker Office Add In by default.
Ian

IFilter 9 not searching OCR .PDFs post SP2 for Office 2007 Servers

Prior to the installation of Service Pack 2 for Office 2007 Servers, .PDF files that were scanned in and then ran against Optical Character Recognition software could be searched with the iFliter 9 for Windows MOSS, x64. Now, those specific files no longer are searchable however; files that were converted directly from another application, such as MS Word or Excel, that were converted directly into .PDF files work fine. Has anyone ever seen anything like this or can give me a direction to go to get this resolved? Adobe's support for this product is non-existant and I am sure Microsoft will not be a help since it is not their product.

See if this discussion helps:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.sha repoint.general&tid=d11d3de7-8344-4dad-9f09-bd84c39e9817&mid=d11d3de7-8344-4dad-9f09-bd84c 39e9817&cat=en_US_2BE0F7C1-F80B-C480-EA27-790E679D7E1B&lang=en&cr=US&sloc=&p=1
or
http://www.adobe.com/special/acrobat/configuring_pdf_ifilter_for_ms_sharepoint_2007.pdf

Export to excel using service for office 2007

Hi All,
I am using a service to download the opport search result data into excel. Inside the code, it gets all the data and opens one window of excel download and closes automatically after few second. And finally does not download anything.
It is working for office 2003, not for office 2007.I am following piece of code.Please help me how to achieve the same.
DATA: l_xstring TYPE xstring,
      app_type type string,
      app_type_c(50) type c.
app_type = 'APPLICATION/MSEXCEL; charset=utf-16le'.
      app_type_c = app_type.
      CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
        EXPORTING
          text     = output      "my data to be exported into excel
          mimetype = app_type_c
        IMPORTING
          buffer   = l_xstring.
      CONCATENATE cl_abap_char_utilities=>byte_order_mark_little
                   l_xstring
                   INTO l_xstring IN BYTE MODE.
server->response->set_header_field( name = 'content-type'
                                    value = app_type ).
server->response->delete_header_field( name = if_http_header_fields=>cache_control ).
server->response->delete_header_field( name = if_http_header_fields=>expires ).
server->response->delete_header_field( name = if_http_header_fields=>pragma ).
server->response->set_header_field( name = 'Content-Disposition'
                                    value = 'attachment;filename=Opportunity_Result.xls' ).
CLEAR lv_length.
lv_length = XSTRLEN( l_xstring ).
server->response->set_data( data = l_xstring
                             length = lv_length ).

Maybe it's possible, but I doubt it.
Reason is that you're asking the URL to run the report and then once done export out the values and I just don't think the 'i' - or now 'g' versions support this.
This was why the command line interface with the Desktop version was so popular as this is exactly the kind of thing you can do, plus much more.
I checked the documentation for Plus and can find nothing about doing this in the URL. Maybe someone will say otherwise, but with Plus I don't think it's possible.
Russ

Microsoft Query for Office 2013 Home and Business

Where can I get Microsoft Query for Office 2013 Home and Business version? I have used it for years on my old XP machine with Office 2003.
Thank you, Sue

Hi,
You seem got an error like "Microsoft query could not be started because it isn’t installed" when you used it.
It may be not installed yet. We can go to "Control Panel\All Control Panel Items\Programs and Features\Office 2013 Home and Business\change\Microsoft tools\MS query" and check if it is installed/enabled.
If it is not installed, please use the Install CD/ full installation copy to reinstall it.
http://social.technet.microsoft.com/Forums/office/en-US/eb7bfe7d-8fa4-4faf-8563-13ae8b04346d/microsoft-query-could-not-be-started-because-it-isnt-installed?forum=excel (It
also applies to Excel 2013)
Regards,
George Zhao
TechNet Community Support

Zen V Plus support for Office 2007 Supp

Hi All?Anybody heard when the Zen V PLus will have support for Office 2007 to be able to synchronize contacts, etc.Message Edited by stevenvj on 06-20-200703:20 AM

well, I got a very very quick response from Creative. I don;t know if what they said to do will solve my problem but they sent a very detailed list of things to do so we are now off to copy the info from our zen v pluses in case we lose what we put on them and will post an update to let you all know if we solved this and how. While I am not impressed with the product at this moment if this works? then I will be very impressed with how this has been handled so far....

Microsoft Patches for Call Manager

HELP !!
Where do I find the "approved" Microsoft patches for CCM4.x please ?
Regards
Scott

Hi Scott,
You will need a valid CCO account (which I guess you've already got). Then just go to the support section on the Cisco website, choose "download software", then just specify your CCM version etc. and you will see all the patches available.
Cisco guarantees that they will release any critical operating system patch within 24 hours of the Microsoft announcement. Noncritical patches are rolled up into a monthly update.
Please rate if useful....

Problem Embedding 3d objects in Microsoft office 2007 applications

Dear Experts-
I'm currently using adobe X professional with the 3d pdf converter from Tetra4d to embed 3d cad models into a pdf file. Maybe i am wrong to say this but i notice one missing feature if it is to be compared with Adobe Professional Extended 9.
In Adobe professional extended 9 version, i was able to embed 3d cad/object into a microsoft word 2007 by clicking the "embed 3d" on the Acrobat ribbon. However when I recently upgraded to adobe X pro, i cant find this button on the acrobat ribbon.
Am i having some settings problem or does Adobe Pro X cancelled out the ability to embed 3d object in microsoft office 2007?? Are there any work around methods that enable me to do the same?

Correct, Updates to Acrobat X Pro to support MS 2010 have occured and they do not support embedding 3D Objects. Curently the level of effort required to develop our own 3D plugin for MS products is quite large and has been out prioritized by other enhancements request by our customers.
That said, I have personally tried a free Powerpoint plugin that has successfully allowed a PDF to be embeded as a link into a Powerpoint document. Feedback from several customers is that it is also successful.
The product can be found here -
http://skp.mvps.org/liveweb.htm
Tetra 4D is in no way associated to this product, and any questions should be directed to the developer.
Craig@tetra4d

Web Location URLs for Office 2007 documents (pptx, xlsx, docx) not working

In our current Content Server solution implemented, each content has a Web Location URL and a Native File associated with it. The Web Location URL(for a content in Public security group) is of the following format:
http://ucmurl/groups/public/intranetcontent/CONTENT_ID.doc
So far when a user clicks on this link, they are just presented with an 'Open' 'Save' dialog box, which clearly shows that UCM identifies this file format. So for a Word 2003 document called test.doc, the Open-Save dialog box says:
Name: test.doc
Type: Microsoft Word document..etc.
The behaviour is the same for all Office 2003 documents, pdfs and images. However, it seems like UCM does not identify Office 2007 documents. When I check-in a content - test.pptx, and click on the Web Location URL, it prompts me to Open/Save a 'ZIP' file, which is what UCM does for any unidentified file formats.
Any suggestions on how to fix this?
The file formats under configuration manager have been updated to include the following formats with PASSTHRU conversion (since we dont need any conversion on these):
pptx: application/vnd.openxmlformats-officedocument.presentationml.presentation
docx: application/vnd.openxmlformats-officedocument.wordprocessingml.document
xlsx: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
The desired functionality is that when the user clicks on web location url, UCM should identify these file formats, and NOT consider them as ZIP files. Any help would be greatly appreciated.

Try these - if you're using IIS. If not, them something similar should fix.
Update IIS to include additional MIME types
Also, if you want to add all of the Microsoft Office 2007 mime-types to IIS in one step you can do this:
1. Stop IIS
2. Edit the metabase XML file (C:\WINDOWS\system32\inetsrv\MetaBase.xml) using a text editor.
3. Search for the <IIsMimeMap Location="/LM/MimeMap" â€¦> element and append the lines below to the MimeMap attribute
.docm,application/vnd.ms-word.document.macroEnabled.12
.docx,application/vnd.openxmlformats-officedocument.wordprocessingml.document
.dotm,application/vnd.ms-word.template.macroEnabled.12
.dotx,application/vnd.openxmlformats-officedocument.wordprocessingml.template
.potm,application/vnd.ms-powerpoint.template.macroEnabled.12
.potx,application/vnd.openxmlformats-officedocument.presentationml.template
.ppam,application/vnd.ms-powerpoint.addin.macroEnabled.12
.ppsm,application/vnd.ms-powerpoint.slideshow.macroEnabled.12
.ppsx,application/vnd.openxmlformats-officedocument.presentationml.slideshow
.pptm,application/vnd.ms-powerpoint.presentation.macroEnabled.12
.pptx,application/vnd.openxmlformats-officedocument.presentationml.presentation
.xlam,application/vnd.ms-excel.addin.macroEnabled.12
.xlsb,application/vnd.ms-excel.sheet.binary.macroEnabled.12
.xlsm,application/vnd.ms-excel.sheet.macroEnabled.12
.xlsx,application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
.xltm,application/vnd.ms-excel.template.macroEnabled.12
.xltx,application/vnd.openxmlformats-officedocument.spreadsheetml.template
4. Save the C:\WINDOWS\system32\inetsrv\MetaBase.xml file
5. Start IIS
6. Perform Collection Rebuild on Content Server

WebADI cannot create template for office 2007

Hi all,
When I created document for template office 2007, the page became blank without any error and warning;
Could you please advise solution?
OS: Window 7;
EBS: 11.5.10.2
Office: 2007
Here is the bne.log:
4/25/12 2:19 PM ERROR BneBajaServlet:doRequest() - Throwable: java.lang.NoClassDefFoundError: oracle/apps/bne/integrator/document/template/BneBundleTemplateInterface
4/25/12 2:19 PM ERROR BneBajaServlet:doRequest() - Throwable: java.lang.NoClassDefFoundError: oracle/apps/bne/integrator/document/template/BneBundleTemplateInterface
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at oracle.apps.bne.integrator.document.BneViewerFactory.loadViewerObject(BneViewerFactory.java:110)
at oracle.apps.bne.integrator.document.BneViewerFactory.createViewerObject(BneViewerFactory.java:75)
at oracle.apps.bne.integrator.document.BneDocumentService.createViewerContent(BneDocumentService.java:623)
at oracle.apps.bne.integrator.document.BneDocumentService.createPage(BneDocumentService.java:352)
at oracle.apps.bne.integrator.document.BneDocumentService.handleRequest(BneDocumentService.java:191)
at oracle.apps.bne.framework.BneBajaServlet.doRequest(BneBajaServlet.java:256)
at oracle.apps.bne.framework.BneBaseServlet.doGet(BneBaseServlet.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:499)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
at org.apache.jserv.JServConnection.run(JServConnection.java:294)
at java.lang.Thread.run(Thread.java:534)
Thanks in advance.

Hi Susan,
As my understanding, your development and production environments are two (two way) trusted domains in one forest, and the SharePoint instance was built on the development domain. If this is the truth, please first verify whether your production domain account
profile has been imported into the user profile service application. If it is not, refer to the following article to check the configuration of your user profile synchronization.
https://technet.microsoft.com/en-us/library/ee721049.aspx
If your user profile can be searched correctly, the issue might be caused by fact that the people picker search was limited to the development domain. Please use the following command to configure the people picker search domains:
stsadm –o setproperty –pn peoplepicker-searchadforests –pv <list of forests or domains> -url <WebApp>
More information can be found in
https://technet.microsoft.com/en-us/library/cc263460.aspx
Thanks,
Reken Liu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Acrobat Pro 8.1.2 won't create PDFs by itself or within an Office 2007 application. Please help.

Well, needless to say, everything was working fine when our department was running Acrobat 7 and Office 2003. We made the choice a few weeks ago to upgrade to Office 2007 and Acrobat 8. Both are pushed via Group Policy. One other thing to note, as I think it might be an issue, is that our users have their My Documents redirected to a server. I only mention this, because the Default PDF Output Folder within Acrobat 8 is My Documents.
Here are the strange things that we've noticed so far:
1) When you open up the Adobe PDF Properties within Printers and Faxes, the Location displays an "x" followed by two non-standard box characters that I can't seem to write out here. I've uploaded a screen shot if that makes it easier. On a manually installed copy of Acrobat 8, this location box will say My Documents.
http://i57.photobucket.com/albums/g223/daedalus42/adobe_weird_characters.png
2) The Adobe PDF printer port grabs LPT1, even if there is another printer already on that port. This behavior is seen when being pushed via GPO. When it's manually installed via the disc, Adobe PDF gets it's own special port "My Documents\*.pdf" with a description of "Adobe PDF Port". When I try to see if I can add such a port on the GPO pushed computers, it doesn't list it as an option. Here again are two screen shots to show what I'm talking about.
Weird Port:
http://i57.photobucket.com/albums/g223/daedalus42/adobe_weird_port.png
Adobe Port:
http://i57.photobucket.com/albums/g223/daedalus42/adobe_correct_port.png
Ok, so those are just the oddities seen after performing a GPO installation.
3) When I right click on a Word 2007 (*.docx) file and choose "Convert to Adobe PDF", it asks me where I want to save the newly created PDF at. It will start converting it, but a few seconds later a balloon error pops up saying that the document failed to print.
4) When I try to create a PDF via the Word 2007 ribbon add-on for Acrobat, I get the same error.
I decided to bump a standard user up to administrator of the local machine. All these errors go away and they can create PDFs to their heart's content. As soon as I bump them back down to a standard user, new errors arise.
5) Now when they try to create a PDF, they get prompted TWICE for the PDF Save As location. When I click on Convert to PDF via the context menu of the Word 2007 file, I get the Adobe PDF Status box, then a few seconds later, I get the Save Adobe PDF File As box. I tell it where to save the PDF to. I then get a second box asking me where to save the PDF to, but it's titled different. This new box is "Save PDF File As". Whatever location I choose there, I get an Access Denied error and an Adobe Printer error that the document has failed to print. I've created screen shots of those as well. Here they are in order:
http://i57.photobucket.com/albums/g223/daedalus42/adobe_access_denied_01.png
http://i57.photobucket.com/albums/g223/daedalus42/adobe_access_denied_02.png
http://i57.photobucket.com/albums/g223/daedalus42/adobe_access_denied_03.png
http://i57.photobucket.com/albums/g223/daedalus42/adobe_access_denied_04.png
Does anyone have any solutions whatsoever to fix this? I'm not about to go around to 100 computers and install Acrobat manually when it should work correctly via GPO. If Acrobat doesn't like the fact that a user My Documents is redirected to the server, I noticed that I can change the default PDF file location within the Adobe Customization Wizard. I've not tested that yet to see if it would even help.
I should mention that I have tried running a repair. Didn't help. Uninstalling and reinstalling via GPO. Didn't help. So, we've installed the Microsoft Office PDF Creator plug-in and that works perfectly. For the time being Acrobat Pro has basically dropped itself down to a reader for all intents and purposes.

@ Bill@VT: I did try adding a port. That's the problem. When it's on a problematic installation, those special Adobe Port aren't available for me to choose from.
OK, I have some new information regarding my issue. I've done some more testing and this is what I have learned and how I arrived at that conclusion.
b It appears to be an issue with the 8.1.2 update.
1) I manually installed Acrobat 8.0.0 via the executable file I downloaded from Adobe Licensing. I had to go through all the installation prompts, enter the serial key, accept the EULA, etc. I even applied the 8.1.0 update. At this point, everything was fine. Any user on this computer could create PDFs via any method. The Adobe PDF Port was correct and no listed under LPT1 like in the above screen shots. And My Documents was listed as the Default PDF Location, even though users have their My Docs redirected to the server. Like I said, everything worked perfectly.
2) I decided to install via the Administrative Install Point (AIP) on the server for Acrobat 8.1.2 and the corresponding transform file. After doing this, the problems came back. My first assumption is that the transform file is causing the problem.
3) To verify that it was in fact the transform file I perform an install from the AIP using the AcroPro.msi file only. No switches and no transform file. Guess what? Problems are still there. So, that wipes out the transform file problem.
A couple of notes:
It could be related to the AIP and doing administrative installation upgrades to 8.1.2. My next test is to install 8.0.0 from scratch and manually upgrade that installation to 8.1.0, then 8.1.1, then 8.1.2 to find out when and if it breaks.
I was able to get a contact number for Adobe's "Volume Licensing" department, so I might end up giving them a call. In fact, even if I narrow down what appears to be the problem, I'm still going to have to give them a call to find out what can be done about it. Because at the moment, the issue is there for 100+ users and something needs to be fixed. All I'm doing at this point is working backwards to figure out what may have caused the problem in the first place.

Uploading files Mime Type not correct for Office 2007 default extensions.

hi all,
My company has recently moved over to MS Office 2007 and the default extensions for word, excel etc are now .docx, xlsx etc (ie xml based).
Unfortunately now when we upload files through APEX to the database the MIME TYPE value for these files isn't being recognised and not loadeding correctly into the APEX_APPLICATION_FILES table and subsequently any future retrieval of these files fails.
I could put some logic inthe up load procedure to look at the filename in APEX_APPLICATION_FILES and hard code in the releavnt mime types but this still causes problems when retrieving the content.
Has anyone come across this and got a workround? Is it a bug in AE?
regards
James
FYI - using APEX 3.0.2 over 11G.

I have not any response to my question and not sure if it is in Apex I need to look or the tomcat server that I need to look. I have a useful application to try to show others what Apex can do for our customers to collaborate. However, most of our customers are using office 2007 so, hoping this is possible.
I am using apex 3.2.0.00.27 if that helps someone to point me where to find more info on being able to have Word 2007 or excel 2007 fire up to open a .docx or .xlss file stored in a table blob column. Word or Excel does fire up to open .doc and .xls files.
The following is the query for a report selecting the filenames uploaded into a blob column in my table:
{ SELECT s.ID, SUBSTR(s.NAME,INSTR(s.NAME, '/',1,1)+1,length(s.NAME)) SHORT_FNAME, s.SUBJECT
FROM spp_attachments s
WHERE s.PROGRAM_ID = :P2_PROGRAMID }
Below is the stored procedure called from the link on the short_fname column in report query above.
{ create or replace PROCEDURE download_file(p_file IN number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
APEX_APPLICATION.G_FLOW_ID :=245;
IF NOT (wwv_flow_custom_auth_std.is_session_valid) then
owa_util.status_line(404, 'Page Not Found',true);
return;
else
SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM spp_attachments
WHERE id = p_file;
-- set up HTTP header
-- use an NVL around the mime type and
-- if it is a null set it to application/octect
-- application/octect may launch a download window from windows
owa_util.mime_header( nvl(v_mime,'application/octet'),
FALSE );
-- set the size so the browser knows how much to download
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment;
filename="'||replace(REPLACE(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),NULL),chr(13),NULL)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end if;
end download_file; }
Thank you,
Mark

Support for Office 2007 files (especially docx) ?

Hi,
can you please give me a hint if it's possible to use ora-text with the current office 2007 file formats ?
I need to have support for word 2007 (docx) format very soon
Is it already available ?
If not, is there a plan to support those formats ?
Thank you

Hi,
the workaround descrived above would also work for your plsql app. Therefore you can use the PL/SQL XSLT Processor in order to extract the content needed from the office 2007 documents. See DBMS_XSLPROCESSOR.
What is your business case? How do you store and index your documents?
p.s Here is an example of an xslt to extract the text content from an docx document. The internal structure of docx document is based on the Open Packaging Conventions (see http://openxmldeveloper.org/articles/OPC_parts.aspx )
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:w="http://schemas.openxmlformats.org/wordprocessingml/2006/main"
xmlns:v="urn:schemas-microsoft-com:vml"
exclude-result-prefixes="w v">
<xsl:output method="text" indent="no" encoding="UTF-8" version="1.0"/>

<xsl:template match="/">

<xsl:apply-templates select="w:document"/>

<xsl:apply-templates select="w:hdr"/>

<xsl:apply-templates select="w:ftr"/>

<xsl:apply-templates select="w:comments"/>

<xsl:apply-templates select="w:footnotes"/>

<xsl:apply-templates select="w:endnotes"/>

<xsl:apply-templates select="w:glossaryDocument"/>
</xsl:template>

<xsl:template match="w:document">
<xsl:for-each select="//w:p">
<xsl:apply-templates select="*/w:t"/>
<xsl:text>
</xsl:text>
</xsl:for-each>

<xsl:apply-templates select="//v:textpath"/>
</xsl:template>

<xsl:template match="*/w:t">
<xsl:value-of select="."/>
</xsl:template>

<xsl:template match="//v:textpath">
<xsl:value-of select="@string"/>
</xsl:template>


<xsl:template match="w:hdr">
<xsl:for-each select="//w:p">
<xsl:apply-templates select="*/w:t"/>
<xsl:text>
</xsl:text>
</xsl:for-each>
</xsl:template>


<xsl:template match="w:ftr">
<xsl:for-each select="//w:p">
<xsl:apply-templates select="*/w:t"/>
<xsl:text>
</xsl:text>
</xsl:for-each>
</xsl:template>


<xsl:template match="w:comments">
<xsl:for-each select="//w:t">
<xsl:value-of select="."/>
<xsl:text> </xsl:text>
</xsl:for-each>
</xsl:template>


<xsl:template match="w:footnotes">
<xsl:for-each select="//w:p">
<xsl:apply-templates select="*/w:t"/>
<xsl:text> </xsl:text>
</xsl:for-each>
</xsl:template>


<xsl:template match="w:endnotes">
<xsl:for-each select="//w:p">
<xsl:apply-templates select="*/w:t"/>
<xsl:text> </xsl:text>
</xsl:for-each>
</xsl:template>


<xsl:template match="w:glossaryDocument">
<xsl:for-each select="//w:p">
<xsl:apply-templates select="*/w:t"/>
<xsl:text>
</xsl:text>
</xsl:for-each>

<xsl:apply-templates select="//v:textpath"/>
</xsl:template>

</xsl:stylesheet>
Edited by: user304344 on Mar 30, 2009 10:23 PM

Acrobat add-in for Office 2007 Word

I had a problem with the tab for acrobat in Word 2007 it suddenly decided to disappear. I found it in the disabled add-ins. but it would not re activate.
the solution was to completely remove the add-in and then add it back in from the file menu. all now works as it should

Presenter has never been a "free" download. If you are a
member of the Authors group in Connect then you can get your plugin
from the "Getting Started" link on your homepage. The current build
is Presenter 6.2 and it does work in Office 2007.
Jorma@RealEyes

Microsoft patches for Office 2007 applications . . . . .

Similar Messages

Maybe you are looking for