Microsoft RMS Add-in Operation is not valid due to the current state of the object

Microsoft Rights Management sharing application for Windows
Microsoft Windows 7/Office 2010 Service Pack 2
Click 'Share Protected'
Receive the following error message 'Microsoft RMS Add-in Operation is not valid due to the current state of the object'
Microsoft Windows 7/Office 2013 Service Pack 1
Works fine
Any ideas why this is not working?

Hi lra,
As per my understanding, I think this issue can be caused by MaxHttpCollectionKeys settings in report manager web.config file.
For more details, please refer this similar thread to override the default value of MaxHttpCollectionKeys:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object?forum=sqlreportingservices
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Error occurred in deployment step 'Add Solution': Operation is not valid due to the current state of the object

hi,
when i was trying to deploy a SP solution from my vs 2012 solution. this error is displayed.
i tried many things like
1) get the wsp and apply power shell cmds to add and deploy, here also it failed:
Add-SPSolution -LiteralPath d:\mywsp.wsp
Install-SPSolution mywsp.wsp -GacDeployment -AllWebApplications -Local
2) restart the timer services and do iisreset and reboot the server. etc .as mentioned in one of the the below blogs:
http://sharepoint1on1.blogspot.in/2014/04/sharepoint-error-occurred-in-deployment.html
http://suehernandez.wordpress.com/2011/03/31/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
http://www.dotnetsharepoint.com/2014/04/error-occurred-in-deployment-step-add.html
http://social.msdn.microsoft.com/Forums/en-US/63adde23-03cf-4b65-923e-1219da94a780/error-occurred-in-deployment-step-add-solution-operation-is-not-valid-due-to-the-current-state-of?forum=sharepointdevelopmentprevious
http://www.shakirmajeed.com/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
but even after doing all these steps, the error still persists!. and am not deploying into a remote server, the dev env is in a VM, where sp 2013, vs 2012, sql 2012 are installed.
just wanna share one note: there is a isue in my search admin component. index was reset due to some reason. and from that time onwards my search full/incremental crawls were not working!
will this cause an issue in my wsp deployment ? i hope it wont, still asking...
can anyone help me how to resolve this error.because this is a show stopper for me for the last few days!
help is highly appreciated!

This issue cause because of feature activation failure while WSP deployment.
when you create a WSP using visual studio, it creates WSP package with default deployment configuration settings.
Please restrict feature activation configuration, this will help you to troubleshoot this issue.
- Click on Project in WSP and press F4, it will open "Project Properties"
- set "Active deployment Configuration" - as "No Activation"
- you can activate this features in required sequence after deployment using Activate-SPFeature
If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
Thanks, ShankarSingh(MCP)

Error_27_Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.

I created a SharePoint 2013 farm solution project in Visual Studio 2013 (running on the same machine where SharePoint 2013 server is running) with
event receiver. I added web.config at project root level to store connection string (I'm working off external SQL DB) and got the following error during deployement:
Error 27
Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.
When I commented out the ConfigurationManager.ConnectionStrings["MyConnectionString"].ConnectionString; the error went away. Am I missing something or not supposed to add my own App.config to SharePoint project solution?

Hi,
From your description, you might want to store your connection string in web.config and there is an error during deployment.
It is recommended to store the configuration data of SharePoint solution in either property bags or hierarchical object store.
The links below will provide more information about this:
http://blogs.msdn.com/b/zwsong/archive/2012/03/27/where-should-you-store-your-sharepoint-solution-s-configuration-data.aspx
http://msdn.microsoft.com/en-us/library/ff647766.aspx
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they
help and unmark them if they provide no help. If you have feedback for TechNet
Subscriber Support, contact [email protected]
Patrick Liang
TechNet Community Support

WCF Service update UPS. Operation is not valid due to the current state of the object.

I try import custom data to custom user properties from my own wcf service (on sharepoint server machine), but i got
Message "Operation is not valid due to the current state of the object. "
on line
userProfile[PropertyConstants.Department].Value = "SDDDD";
Why i cant modify property value?
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite("http://portal.local"))
SPServiceContext serviceContext = SPServiceContext.GetContext(site);
using (var web = site.OpenWeb())
Debug.WriteLine(web.CurrentUser); //Here AppPoolAccount user of current wcf service
Debug.WriteLine(WindowsIdentity.GetCurrent().Name); //Here too AppPoolAccount user of current wcf service
UserProfileManager userProfileMgr = new UserProfileManager(serviceContext);
ProfilePropertyManager profilePropMgr = new UserProfileConfigManager(serviceContext).ProfilePropertyManager;
ProfileSubtypePropertyManager subtypePropMgr = profilePropMgr.GetProfileSubtypeProperties("UserProfile");
UserProfile userProfile = userProfileMgr.GetUserProfile(accountName);
userProfile[PropertyConstants.Department].Value = "SDDDD";
userProfile.Commit();
My service running under domain\SPSvcAcc what have full permissions on UPS service, it's management account and UPS admin with full rights.
If i create console app with identical code and run it under SPSvcAcc account it working without problems
What i do wrong?

Hi,
pls seee if you can add threading like this below to solve the pbm
https://social.technet.microsoft.com/Forums/office/en-US/b6d6f85c-e12b-4540-a821-690e296b7b56/operation-is-not-valid-due-to-the-current-state-of-the-object-exception-when-activating-a?forum=sharepointdevelopmentprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

"Operation is not valid due to the current state of the object" error when trying to create a link for a shared folder in OneDrive

I'm trying to share a folder in OneDrive with another user in my organization, and create a link so that people outside of the company can see the folder. Whenever I try to create a link I get an error that says: "Couldn't create the link sorry something
went wrong operation is not valid due to the current state of the object" How do I resolve this?

Hi,
Sorry for replying late and I noticed that you posted another thread in this forum:
http://social.technet.microsoft.com/Forums/en-US/2b8c6f54-9c59-4b37-b28f-1d49a1b7913b/operation-is-not-valid-due-to-the-current-state-of-the-object-error-when-trying-to-create-a-link?forum=officeitpro
I've replied and kindly refer to it to see if it is helpful.
Regards,
Melon Chen
TechNet Community Support

The update operation is not allowed in the current state of the request

When users have logged a request through the service manager 2012 portal and they go back in to add user input they sometimes receive a message that says " The update operation is not allowed in the current state of the request." The state of the
request has not changed it is still Active and has not breached its service level .
I can't seem to find any information about this error and don't know how to troubleshoot it. Any help and advice would be appreciated.
Thanks
Sarah

ok, so they're adding user comments after creating the service request. looks like this:
the first thing to check is that the user is added to the default, un-scoped "End User" security role, or the custom end user security role they are added to has a scope that includes all work items. The "user input" field adds a user comment related
to the SR, so the ability to create user comments is required to use this field.

Error occurred in deployment step 'Activate Features': Operation is not valid due to the current state of the object.

I recently copied a solution from one dev box to another. After pushing through a handful of other errors I hit a wall with this one. Any hints as to the human translation would be appreciated. The solution works on the original box. Also if there's
a way to make the Forum Category list on this page smaller but with more items while making the icons and white space bigger, Microsoft would like to know. Thanks

Hi George Takei,
This is a common error message which is not easy to find the root cause directly.
Here are some general checking steps:
Check to make sure you haven’t change any objects like namespace, class name, that make feature cannot find specified class.
Deactivate the feature on the site, reset IIS, and redeploy the solution.
Kill the vssphost4.exe in Task Manager, to redeploy the feature.
If the issue persists, it would be better to share the solution here to help to do troubleshooting, what’s the solution used for, is it an event receiver, feature, workflow or other type?
Thanks,
Qiao Wei
TechNet Community Support

Operation is not valid due to the current state of the object

We are working with the System.Transactions for transaction control. An error is happening when confirming a transaction. Even without having changed any information. The user opens a register and does not modify any information, press the Change button and generates the error. Is not processed any UPDATE, DELETE, INSERT. Only queries. Below is the error details:
Data base: Oracle 11g
Application Server: Windows 2003 64 bits. Client 11g 32 bits and 64 bits
Location: System.Transactions
StackTrace:
at System.Transactions.TransactionState.ChangeStatePromotedCommitted(InternalTransaction tx)
at System.Transactions.DurableEnlistmentDelegated.Committed(InternalEnlistment enlistment)
at System.Transactions.SinglePhaseEnlistment.Committed()
at Oracle.DataAccess.Client.PromotableTxnMgr.SinglePhaseCommit(SinglePhaseEnlistment spe)
at System.Transactions.TransactionStateDelegatedCommitting.EnterState(InternalTransaction tx)
at System.Transactions.TransactionStateDelegated.BeginCommit(InternalTransaction tx, Boolean asyncCommit, AsyncCallback asyncCallback, Object asyncState)
at System.Transactions.CommittableTransaction.Commit()
at System.Transactions.TransactionScope.InternalDispose()
at System.Transactions.TransactionScope.Dispose()
at FPw.InfraEstrutura.DataAccess.FPwTransacao.Dispose()
at LG.FPw_Cad.ServicoMapeador.Servicos.FichaCad.Update(Int32 lUserId, Int32 lMatFunc, LGVariant avRegFun, LGVariant avRegATF, Double dSalario, Boolean bConsiste)

What I meant is that it's done any kind of alteration of the tables involved, because the user does not change any of your information on the screen.
The problem happens on a client and does not happen in our test environment.
The version of Oracle.DataAccess both 32-bit and 64 bit is 2.112.1.0.
What is the code in the following summary:
1) Is created transactional context:
Dim TxOptions As New TransactionOptions
Dim OpcaoDeEscopo As TransactionScopeOption
Dim Transacao As System.Transactions.TransactionScope
TxOptions.IsolationLevel = Transactions.IsolationLevel.ReadCommitted
OpcaoDeEscopo = TransactionScopeOption.Required
Transacao = New TransactionScope(opcaoDeEscopo, TxOptions, EnterpriseServicesInteropOption.Full)
2) From this point are open connections are made and query commands to the database.
Are opened and closed connections to the database.
3) At the time of effecting the transaction Dispose of the error happens:
Transacao.Dispose
Note: Our way of working has its own peculiarities, the connection pool is always disabled: ";Pooling = false". It is inserted directly in the connection string. We need to do this because the pool had memory problems turned prey.
Therefore the process of opening and closing connections, you can leave the system slow. So to avoid open connections within the transactional context, in some cases we enforce the transaction enlist. As follows:
Dim TransacaoCorrente As ITransaction = CType(ContextUtil.Transaction, ITransaction)
Conexao.EnlistDistributedTransaction(TransacaoCorrente)
Can you help us?
Edited by: 893128 on Oct 25, 2011 9:24 AM

Operation is no valid due to current state of object.

I have created a web part. And in that web part I have a link which refer to a page in share point with query string.
Some thing like as :
<a href=http://sharepoint:79/codelibrary/PageName.aspx?Id=1/>
It gives the error that Operation is not valid due to current state of object.
But when I call this page with out Id=1 or without any query string, it works fine.
Please help me, where I am doing wrong.
Many Thanks

Hi Naeem,
Thanks for posting your query, Kindly Do NOT call .Update() inside Evelvated Permission’s delegate Just do it below SPSecurity.RunWithElevatedPrivileges
Also, Check out the detail for more details in below mentioned URL
http://blogs.msdn.com/b/suresh/archive/2014/08/26/getting-quot-operation-is-not-valid-due-to-the-current-state-of-the-object-quot-error.aspx
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

SSRS runtime error - The specified operation is not valid

I found a similar post here, but it didn't solve my problem. so i re-post it.
i develop a report with vs2008. i have sql 2008 r2 on my local machine. when i preview the report on my local machine all fine. but when i deployed the report to sql 2008 ssrs server, i got "#Error" in my subtotal field. i opened the log file and found the
error message:
The specified operation is not valid. , ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: The specified operation is not valid.
i used a formular in the expression:
=Sum(IIf(Fields!flag.Value="S",Fields!Size.Value,0))
can someone help?
thanks

I want to make my problem more clear:
1. with the original formula: =Sum(IIf(Fields!Fundflag.Value="S",Fields!FundSize.Value,0)) works very well on my local machine with clicking on Preview. Once deploy to server, i got error.
2.Shahfaisal, your formula works on both side, but not the result i except. because the size field in sp unioned from different source. i only want to subtotal when flag is "S".
any help will be appreciated!
Try this
=Sum(IIF(IsNumeric(Fields!Size.Value)
AND Fields!flag.Value="S",Fields!Size.Value,0))

Destroying connection that is not valid, due to the following exception [com.microsoft.sqlserver.jdbc.SQLServerException: Connection reset]

Hi everyone,
I'm facing the following problem in a Server runing Linux with JBoss AS 4.2.2, JRE 1.6, and MSSQL Server 2005 with JDBC 2.0 (sqljdbc4.jar).
The thing is: on friday morning I started up the server and everything worked fine ... next, from Friday at 6pm to Saturday at 8am nobody has used the system.
Then on Saturday at 8:05 got the following warning lines every time I tried to do something in my application. While it seems that everything works, after a few days the system starts to decrease their performance and malfunction, so I want to know why it
might happen these warnings.
I have tried to find a solution to this problem in several places but I'm not succeeding. That's why I'm writing my problem here...
Hope somebody can help me!
Thanks in advance and best regards!
Cristian.
This is the "error" log.
2011-06-11 08:05:29,680 WARN [org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory] Destroying connection that is not valid, due to the following exception: ConnectionID:2941
com.microsoft.sqlserver.jdbc.SQLServerException: Connection reset
at com.microsoft.sqlserver.jdbc.SQLServerConnection.terminate(SQLServerConnection.java:1352)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.terminate(SQLServerConnection.java:1339)
at com.microsoft.sqlserver.jdbc.TDSChannel.read(IOBuffer.java:1654)
at com.microsoft.sqlserver.jdbc.TDSReader.readPacket(IOBuffer.java:3694)
at com.microsoft.sqlserver.jdbc.TDSCommand.startResponse(IOBuffer.java:5022)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(SQLServerStatement.java:773)
at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(SQLServerStatement.java:676)
at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4575)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1400)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:179)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:154)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.execute(SQLServerStatement.java:649)
at org.jboss.resource.adapter.jdbc.CheckValidConnectionSQL.isValidConnection(CheckValidConnectionSQL.java:58)
at org.jboss.resource.adapter.jdbc.BaseWrapperManagedConnectionFactory.isValidConnection(BaseWrapperManagedConnectionFactory.java:435)
at org.jboss.resource.adapter.jdbc.BaseWrapperManagedConnection.checkValid(BaseWrapperManagedConnection.java:231)
at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.matchManagedConnections(LocalManagedConnectionFactory.java:200)
at org.jboss.resource.connectionmanager.InternalManagedConnectionPool.getConnection(InternalManagedConnectionPool.java:211)
at org.jboss.resource.connectionmanager.JBossManagedConnectionPool$BasePool.getConnection(JBossManagedConnectionPool.java:538)
at org.jboss.resource.connectionmanager.BaseConnectionManager2.getManagedConnection(BaseConnectionManager2.java:341)
at org.jboss.resource.connectionmanager.TxConnectionManager.getManagedConnection(TxConnectionManager.java:315)
at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:396)
at org.jboss.resource.connectionmanager.BaseConnectionManager2$ConnectionManagerProxy.allocateConnection(BaseConnectionManager2.java:842)
at org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:88)
at org.hibernate.connection.DatasourceConnectionProvider.getConnection(DatasourceConnectionProvider.java:69)
at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:423)
at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:144)
at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:139)
at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1547)
at org.hibernate.loader.Loader.doQuery(Loader.java:673)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:236)
at org.hibernate.loader.Loader.doList(Loader.java:2220)
And this is my mssql-ds.xml
<local-tx-datasource>
<jndi-name>jdbc/bpmsdb</jndi-name>
<connection-url>jdbc:sqlserver://ipaddress:1433;DatabaseName=BPMS</connection-url>
<driver-class>com.microsoft.sqlserver.jdbc.SQLServerDriver</driver-class>
<user-name>user</user-name>
<password>pwd</password>
<min-pool-size>5</min-pool-size>
<max-pool-size>50</max-pool-size>
<exception-sorter-class-name>
org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter
</exception-sorter-class-name>
<metadata>
<type-mapping>MS SQLSERVER2000</type-mapping>
</metadata>
<new-connection-sql>select 1</new-connection-sql>
<check-valid-connection-sql>select 1</check-valid-connection-sql>
<idle-timeout-minutes>5</idle-timeout-minutes>
</local-tx-datasource>

I´m facing similar problem with Linux and SQL Server 2008 R2. I made the downgrade of JDK 1.6 from 27 to 26 (some people reporting errors when upgraded to jdk1.6_29 and rolling back is ok) but for me the error persists. At this moment we are testing with
sqljdbc4.jar version 4.0 (released in 3/6/2012). The curious I have two equals Linux boxes and only one have presented connection reset errors.
Thanks in advance.
Carlos

OracleConnection.ClearAllPools() throws exception Operation not valid due t

My app allows new logons so during the app startup I call my general "new logon" procedure that among other things does a ClearAllPools.
OracleConnection.ClearAllPools() throws exception "Operation not valid due to current state of the object".
I have converted from
System.Data.OracleClient.OracleConnection
to
Oracle.DataAccess.Client.OracleConnection
Did not have any problem when using the former.

According to the documentation, ClearAllPools() throws an exception if there's no connection pool to clear. Most likely in that case the System.Data.OracleClient version is just not doing anything instead.
You should just be able to catch InvalidOperationException() at that point and ignore it.

SQL Server Mgt Studio 2008 installation problem - Key not valid for use in specified state

I'm setting up SQL Server Management Studio 2008 on my laptop. It installed fine, but failed to import a regsrver file exported from another machine. This appears to have been due to the fact that I exported the file with usernames and passwords, although I must admit that's pretty darned inconvenient if it can't be done.
Nevertheless, I exported the file again without usernames and passwords, but the new install now won't let me even see servers, let alone import any new ones.
When I start Studio, it gives me the "Key not valid for use in specified state" error. When I 'continue', I'm delivered to a screen with the 'registered servers' pane crippled. It has no contents at all and no ability to add, select, import, export. Nothing there.
How do I rectify this?
The installation is on Windows 7 Home Premium.
Thanks for any suggestions.

Hi Don,
Since this issue was still not resolved even after you reinstall SQL Server 2008, I think that this issue is probably related to some corrupted files or registry keys. Please refer to the following steps to see if you can resolve this issue:
1. Close your SSMS;
2. Go to the folder %appdata%\Microsoft\Microsoft SQL Server\100\Tools\ and check if there is a Shell folder, if so, rename it to Shell-Copy;
3. Re-open your SSMS to see if the error persists.
Everytime SQL Server 2008 Management Studio starts, it will read information from this folder to retrieve and recover some data. If the information does not exists, it will recreate new ones. Please check if this helps.
Best regards,
Charles Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help
To add to Don's comment, if you are using a different account (for example, an SA account) to run SQL Server management studio then make sure to change the user profile name when you browse to "%appdata%\Microsoft\Microsoft SQL Server\100\Tools\".
I know many of us developers have multiple accounts and I usually have my SA account have logon privileges on databases not my regular AD Account.
Other than that, the reason why this fails is because MS encrypted the regsrvr file on the source computer using the source computer's ID and is therefore unable to decrypt the file on the destination computer. To me that just doesn't make sense since the
whole idea of Export and import was to move this information across computers! And that's why this works when you import without username and passwords - no more encryption/decryption. Since we use integrated windows logon (trusted_connection=true) it works
great. For the few servers that we had SQL Logons I had to manually type them in and save. But all in all, pretty painless.

Site behind load balancer - Key not valid for use in specified state

Hi,
I have created a sharepoint application page to access an active end point on ADFS and establish a fedauth session. All works well in single server. But when the page runs behind load balancer with 2 servers, it fails with key not valid for use in specified
state exception. Stickiness is enabled on load balancer. verified that.
I had made few changes to config file in microsoft.identitymodel section to accomodate adfs custom login. This included removing securitytokenhandlers and issuertokenresolvers as well. Is this impacting the encryption/decryption in anyway?
Any pointers would help.
Reference point for my application page : http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=76

Hi,
As I understand, you encountered the error “Key not valid for use in specified state” when ADFS custom login.
In order to run in Windows Azure Web Sites a Web application which uses WIF for handling authentication, you must change the default cookie protection method (DPAPI, not available on Windows Azure Web Sites) to something that will work in a farmed environment
and with the IIS’ user profile load turned off.
1. If you are using the Identity and Access Tools for VS2012, just go to the Configuration tab and check the box “Enable Web farm ready cookies”.
2. If you want to do things by hand, add the following code snippet in your system.identitymodel/identityConfiguration element:
   <securityTokenHandlers>
     <add type="System.IdentityModel.Services.Tokens.MachineKeySessionSecurityTokenHandler,
             System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
      <remove type="System.IdentityModel.Tokens.SessionSecurityTokenHandler,
            System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </securityTokenHandlers>
There is a similar case:
http://stackoverflow.com/questions/19323287/key-not-valid-for-use-in-specified-state-error-for-net-4-5-mvc-4-application
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Reporting Service Integration mode and Key not valid for use in specified state

I had to uninstall SharePoint Foundation 2013 and reinstall it.
What I have done:
I uninstalled SharePoint and after that I removed all databases.
I reinstalled SharePoint Foundation 2013 and it completed without errors.
Everything else is working, except SSRS in Sharepoint Integrated Mode.
If I check Central Administration - Manage services on server, I can found out that SQL Server Reporting Service Service is
"Started". But if I try to create new service application (SQL Server Reporting Services Service Application), it gives me an error message:
"Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)"
I uninstalled SSRS in Sharepoint Integrated Mode and I reinstalled it but problems exists.
It seems that "Encryption Keys" cause this problem.
https://support.microsoft.com/kb/955757
https://msdn.microsoft.com/en-us/library/ms156010%28v=sql.110%29.aspx
I tried to Re-create Encryption Keys and Delete keys, but its not working either. It gives me only error message that:
"Unable to locate the Reporting Server Windows service for instance MSSQLSERVER."
I don't have any reporting server databases, because I removed all
databases when I uninstalled SharePoint. Also I don't have Encryption
Keys backups.
I have found several similar question but no answer, example here:
https://social.technet.microsoft.com/Forums/ie/en-US/df02dc05-5ce8-499d-9ba3-ab392a5fc3af/sharepoint-2013-ssrs-application-error-key-not-valid-for-use-in-specified-state-exception?forum=sharepointdevelopment
Any ideas how I can fix this problem?

Hi,
From the Reporting Server Configuration Manager you have to restore the encryption key.
Please try to delete databases(reportserver & reportservertempdb) and delete the reportserver and reports site on IIS. Then you have to start over the configuration again.
If the issue still exists, Please check ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log locates in
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS"
More information about SQL Reporting services Installation with SharePoint 2013 for your reference:
http://expertsharepoint.blogspot.de/2014/03/sql-reporting-services-installation.html
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Microsoft RMS Add-in Operation is not valid due to the current state of the object

Similar Messages

Maybe you are looking for