Midi notes in Flash?

Is it possible to read midi notes in flash from a
midi-keyboard?
If so, how?
// Hexster

Can you guys change the character codes your MIDI keyboards
export? Your midi keyboard has to generate the same binary code
(interrupts) generated by the normal keyboard then and only then
flash can detect them as keystrokes

Similar Messages

For what reason on my tablet with OS Android 4.1 does not work flash on the sites?

Hi! I recently bought a Google Nexus 7 tablet with Android 4.1 operating system and on my tablet does not work flash sites. Why adobe does not release a new version of flash for android 4.1? Why it was necessary to buy a company Macromedia, if adobe does not want to develop web technology? I think against Adobe can sue for violation of antitrust

I found this for example:
http://www.slashgear.com/adobe-no-jelly-bean-flash-flash-player-pulled-altogether-august-1 5-29236404/

How do I move cc 64 (sustain) data in sync when I move midi notes?

In the matrix editor, when I 'Select All Following' in order to move everything that follows back a few ticks to get rid of a rythmic hesitation, the sustain pedal data doesn't move with the notes. Obviously, this messes up the piano pedaling. Is there a way to 'attach' the controller info to the notes when I move them, or is there a better view window in which to this sort of editing? Thanks!

I was trying to figure this out myself and didn't understand the previous reply at first. But after a few seconds playing around I got it. If you open the midi matrix editor (in the 'windows' menu) you can select the notes you desire to move. After selecting the notes go to the event list (in the 'windows' menu). You should see the notes you've already selected in the event list highlighted in gray.
The items listed as 'control' are the sustain pedal controls in the midi information. (you can tweak these number values here as well). Holding the 'shift' key down, click all of the sustain pedal control items that you want to move. They should be within and/or around the already highlighted notes (the list is in order of sequence of the song). Once all is selected you can switch back to the matrix editor and drag the notes where you want them like normal, but you will also be moving the sustain information since you selected it in the event list.
Also, within the matrix editor itself you can use the view menu and navigate to the hyper draw option and choose sustain pedal. Now you can see the sustain controls under the midi notes and edit the length, etc. You can use the little arrow on the left to change what the hyper draw editing will change as well (volume, sustain pedal, etc.). Hope that helps.

How to create a group of midi notes and...?

Hi, I was thinking about if it's possible to create for example a group of 32 nidi notes with a specific duration and a specific separation between them without painting them.
And then, I have a drum on the beat with its midi notes, now I want to have a sound wich midi note is off the beat at the first time but after a time it gets on the beat linearly, is it possible without painting the notes?Maybe with the transform window??
Thanks a lot!

Is there a ny option in logic to create multiple midi notes at once?
In my comment here, I described how to use the Hyper Editor to create multiple midi notes at once. That was for the purpose of creating a drum roll, but the method can also be used in other situations.
the second is a little bit earlier, the third a little bit more
I'm not sure I understand, but I might. I think the easiest way to do this is to convert the midi to audio, and then use Flex to alter the length (i.e., tempo) of the region.

Midi notes or audio region do not play at the start of a bar?

I am having an issue with a midi loop I have created. If I let the song play a bit until it reaches the loop, logic works just as you'd expect it and everything plays correctly. But if I stop the song, or if I set the song into cycle mode so it repeats, the very first note of the midi loop is ignored, and not played.
So for example, if I set the cursor to start at bar 9, the starting point of the loop, the first midi note is not played. But if a set the cursor at bar 8 and let it play into bar 9 and the loop, all of the notes in the loop play correctly.
I found the following description of the same problem on another forum, but it seemed to suggest that there is no fix for this, which if true, seems kinda bad for a pro application. I was wondering if anyone knew of a workaround or fix to this, because its really annoying missing the notes, or having to expand the cycle region just to get all of the notes to play. Here is the text from the other forum:
_Logic doesn't play the very start of my audio regions when I start playback_
Question: If a region starts at e.g. 1 1 1 1, and it starts playing from the same position, it seems that Logic misses the first few samples - which is especially noticeable with fast-attack transients.
Answer: Apparently Logic doesn't use some kind of pre-play buffering. The workaround is to have your entire song start e.g. one bar later, at 2 1 1 1, and let Logic play from 1 1 1 1. This workaround obviously doesn't work if you've set up a cycle - in which case Logic will miss the first samples when it starts playing as well. Next time it loops through the cycle it does play properly. There's no workaround for this - it's a serious shortcoming of the way Logic handles audio playback. With cycles, you could resort to using the Pause instead of the Play button/command: this will let you start playback from somewhere before the start of the cycle instead of starting at cycle-start (which is what Play does).

I'm having the same problem.
one workaround is to change the delay to +1/192=20 in the delay box in inspector on the given midi track...but this is a terrible thing to have to do over and over again.
PLEASE help if you know what's going on.....I ran logic on my macbook and this NEVER happened. I just bought a macbook pro 2.5 and it's apparently now an issue?
I have searched the net for fixes, and none work....logic does have a pre-play buffer, but it's range isnt large enough to buffer the instrument I'm using...which means the range is less than 1/192...come on....that's messed.
If anyone figures this out, please message me back at [email protected]

To flash...or not to flash... that is the question

Hey guys you have been a great source of help to me and my system is up and running smoothly 2.8C NEO-FIS2R 2x512 corsair @ 2-3-3-5-8, bios revision 1.4. I am debating whether or not to flash to 1.6--the reason i'd like to do this is 1) MAT 2) want to get my memory to run at its rated 2-2-2-5-8.

Memory bandwidth has been fixed too since 1.4.

Safari will not display flash sites

safari will not display flash sites? Instead it will show a small box that says "flash" and once you click on it, it then displays the flash site!!
Any ideas as to why this is happening?
I am running .....
Vendor: Oracle Corporation
Version: Java SE 7 Update 25
and
Flash Player: 11.8.800.94

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

Midi note B below middle C is being played as Eb (below middle C) in the region only

When I'm recoding midi I'm running into a very strange problem..... randomly the B below middle C gets re-routed to Eb (below middle C). It shows right visually in the region, and when I go back to the controller and play the B note it plays correctly but when playing back the region it plays the Eb. Sometimes it will play back correctly but after a while it will happen and when it happens there is no way to make it do anything else....i tried other plugins , other tracks but it stays the same. Again, when you open the region to look at the midi, the midi notes are in the right place, if I click on the Bb note in the region it plays an Eb but if I go to the controller and play a B it plays a B...???. I have looked through everything to try and find anything that would be causing this but haven't found any reason for this.... it is very strange that it is only happening to one note and it always does the same thing....B to Eb....

Yep, that's a known glitch. Very hard to repeat, but reports keep trickling in. There are a few solutions though, but no method of preventing it. Since I reported it first, I haven't encountered it again. Knock on wood.
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=99041&p=523387
http://www.logicprohelp.com/forum/viewtopic.php?p=517486#p517486
https://discussions.apple.com/message/22796767#22796767
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=104849

I'm getting a stuck MIDI note with Garageband 10.0.2?

Using IMAC 3.2Ghz Intel Core i5 running Garageband 10.0.2 with a Yamaha PSR-3500 with MIDI to USB interface.
Everything seems fine at first but then one note will be 'stuck' and continuously sound. Some following actions may stop it, including switching the keyboard mains power on and off. It doesn't seem to be a continuous signal sent because I can see the corresponding MIDI note is not appearing on the piano roll etc. It's just like Garageband 'won't let the note go'?
Any ideas would be appreciated, especially if there are any long-time MIDI users out there - I am brand new to MIDI, via Garageband.

Welcome to the Apple Community Russell.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Not all flash videos on websites work

Hi guys,
First off all, I'm really excited because I made the switch to Apple and Leopard. Yay! But I have one issue I can't figure out.
Not all flash videos on websites work, for example: www.x17online.com
Sometimes it's a blank square and sometimes I see an image but I can't play the video. I have flash installed so what's wrong?
Any help is appreciated!

Got a mbpro 2.4 multi touch, 2gb 250gb safari 3.1.x
Video glitches in flash in safari [not in ffox 2.x] !
The video:
http://www.symfony-project.org/screencast/cart
Seems like build up problems...

Why is the first MIDI note always delayed?

Hi all
I'm having some trouble recording MIDI in Logic Pro X. When using virtual instruments (built-in Logic instruments) there is a latency issue with the first note. When recording or playing along, the first note I play has quite audible latency, but everything after that is fine, no latency. If the song is stopped and I am just playing the instrument it's fine, the problem only occurs when recording or playing back. If I am recording, the MIDI note is recorded in the correct place, it sounds fine in playback.
Really not sure what's going on. I've been looking round on the interwebs, and it seems that others are having the same issue, but I couldn't find any answers that fixed it for me. Any help would be appreciated
I am running Logic 10.0.7 on a MacBook Pro, using Mavericks.
Thanks in advance

This isn't just the first time after I select the track though, even if the track is in live mode it will still have this issue, if I record over and over on the same track, it happens every time. If I hit record, then use pitch bend or something like that during the count in it will be fine, but I have to do this every time I record, and it will create the new region early. I could do this every time I record, but I'm wondering if there's something else I can do to fix it more permanently.
Thanks for the help

Logic randomly playing midi notes. How do I turn it off?

When i solo a track logic triggers a midi note. same with mute and selecting and pretty much every button and menu in logic triggers a midi note or CC. What is going on here? My midi keyboard keeps playing notes cuz logic keep triggering them.
Solo plays a F1
Mute plays a E1
Record plays a C2
selecting a track plays a D4
Everything triggers a midi note or CC. it's bugging me a messing up my sessions. Pleases help me.

Andrew_to wrote:
This is happening to me to. Everytime I open logic to work on something new, the midi instrument just keeps looping C2 over and over again. What gives?
Is it C2 or C-2?

MIDI note input appears 1 octave lower when controller pads are hit

I can't figure this out and I've wasted 5 hours today trying to correct it....
I have recently noticed that midi input from my padKontrol is being transposed down 1 octave (ie I hit an A2, it appears and sounds in my midi applications as A1). This does not occur with midi data that comes direct from my Axiom 61 keyboard; however, it does happen with another device (MV8000) I have that uses the Axiom's Midi IN interface. I hit a pad on the Mv that is assigned to A2, it shows up as A1 in the Logic transport. In Battery it will trigger the cell assigned to A1 instead of A2.
I'm perplexed because it is happening with two different devices on two different interfaces, yet the Axiom doesn't do it on its own ouput, but it does occur on the data received at the midi in on its interface. Doesn't make sense and it occurs both in Logic and Battery. I'm thinking its an AMS/Core Midi issue since hte padKontrol is truly plugnd play (did not have to install drivers), but I dont have clue on how to get AMS to act right. I couldn't find another applicable forum to post this so I am asking here since Logic is the closest subject to my issue.
Anybody have any ideas?

Thanks for the response. I know the two pieces of hardware that are impacted pretty well and they have no setting to transpose outbound midi notes in realtime. I bellieve I found the problem to actually be software related, In Logic, somehow I had the middle C setting set to C3. When I switched it to Roland C4, which I think is the default, the notes I hit on my controller and the MV appeared in the transport as they were programmed. As far as Battery goes, I think it may default to midlle C at C3 (I'll have to check), but I set it to transpose midi input up 1 octave.

Is there a way to reverse a region with midi notes?

i have a two bar loop of some midi notes and want to reverse the region and see what it sounds like.

Try a transformer operation with the Reverse Position preset. Page 730 of the manual. This is the most powerful midi sequencer, use the features!
B

Not displaying flash

I spent 90 minutes in live chat yesterday without a resolution or follow up.
Suddenly Firefox can not display video, animation, flash, etc. It replaces this with white space (no errors, no red X).
I have uninstalled Firefox and reinstalled with no success.
I have re-downloaded flash 10.1 with no success.
Content settings are set to load images automatically.
Clearing cache/history does not help.
This issue happens ONLY in Firefox. Chrome, Opera etc perform as normal.
This is a Windows 7, 64-bit OS.

Thanks for proposing a solution.
This is an old year old question so I will lock the thread.
Anyone reading this please either start your own question using the link [/questions/new/] or try to look at current advice.
Note at the current date Firefox especially firefox on Windows is experiencing problems with Flash Player. In many cases users have had to downgrade from Flash Player 11.3 to the secure Flashplayer 10.3 or he not secure Flash 11.2.
Developers from Flash & Firefox have been cooperating in looking for solutions, and at the time of this post a new release has been made by Adobe that it is hoped will resolve some issues. The release may not even be seen yet on all Adobe pages, and and we are watching for reports from those who try it. It is available from http://get.adobe.com/flashplayer/ (Adobe Flash Player 11.3.300.262 for Firefox)
General information and the specific issue is dealt with in these articles.
* [[Flash 11.3 crashes]] (Includes detailed uninstall and install information)
* [[Flash Plugin - Keep it up to date and troubleshoot problems]] (At this moment in time be careful when considering which version to choose.)

Midi notes in Flash?

Similar Messages

Maybe you are looking for