MiFi4510L sporatically hangs on Web sites w/ IE Win6&7 (THIS URL!); TCP Segment Lost

  I had to use Dial-Up just to get this far!!!
  Sometimes it works fine; other times it hangs FOREVER (TCP Segment Lost)! Must manually STOP..
I've let it hang for over 10 minutes; nothing ever happens after the last trace entry. No re-xmits.
  The last time it hung, I collected dumps&traces, then Stop & Refresh in IE and it worked fine.
During the hang, I successfully TELNET'ed to the DNS (same IPAddr), so it's NOT apparently a connection issue.
Certainly YOUR OWN URL should NOT be having constant problems!
  I powered off&on your device. Still occasionally hangs.
  WHAT IS GOING ON? The only solution seems to be to use Dial-Up!!! I have NEVER had this problem in all the many years
using Dial-Up.
  Here are NETMON traces from a recent hang
669 {DNS:131, UDP:130, IPv4:4} 4:01:19 PM 8/4/2011 127    DNS 0x1    192.168.1.2 8.8.8.8 DNS:QueryId = 0xCAB, QUERY (Standard query), Query  for www.goes.noaa.gov of type Host Addr on class Internet
670 {DNS:131, UDP:130, IPv4:4} 4:01:19 PM 8/4/2011 247    DNS 0x2    8.8.8.8 192.168.1.2 DNS:QueryId = 0xCAB, QUERY (Standard query), Response - Success, 129.15.96.23, 140.90.33.23 ...
671 {TCP:132, IPv4:26} 4:01:19 PM 8/4/2011 116 iexplore.exe 0x12d4  TCP 0x1 Half Connected Disregarded  192.168.1.2 129.15.96.23 TCP:Flags=......S., SrcPort=49248, DstPort=HTTP(80), PayloadLen=0, Seq=3442312612, Ack=0, Win=8192 ( Negotiating scale factor 0x2 ) = 8192
672 {TCP:132, IPv4:26} 4:01:19 PM 8/4/2011 116 iexplore.exe 0x12d4  TCP 0x2 Connected Good  129.15.96.23 192.168.1.2 TCP:Flags=...A..S., SrcPort=HTTP(80), DstPort=49248, PayloadLen=0, Seq=3625396553, Ack=3442312613, Win=5840 ( Negotiated scale factor 0x9 ) = 2990080
673 {TCP:132, IPv4:26} 4:01:19 PM 8/4/2011 104 iexplore.exe 0x12d4  TCP 0x1 Connected Disregarded  192.168.1.2 129.15.96.23 TCP:Flags=...A...., SrcPort=49248, DstPort=HTTP(80), PayloadLen=0, Seq=3442312613, Ack=3625396554, Win=4380 (scale factor 0x2) = 17520
674 {HTTP:133, TCP:132, IPv4:26} 4:01:19 PM 8/4/2011 497 iexplore.exe 0x12d4 Request, GET /GIFS/ECIR.JPG  HTTP 0x1 Connected Disregarded  192.168.1.2 129.15.96.23 HTTP:Request, GET /GIFS/ECIR.JPG
675 {TCP:132, IPv4:26} 4:01:19 PM 8/4/2011 104 iexplore.exe 0x12d4  TCP 0x2 Connected Good  129.15.96.23 192.168.1.2 TCP:Flags=...A...., SrcPort=HTTP(80), DstPort=49248, PayloadLen=0, Seq=3625396554, Ack=3442313006, Win=14 (scale factor 0x9) = 7168
676 {HTTP:133, TCP:132, IPv4:26} 4:01:19 PM 8/4/2011 1286 iexplore.exe 0x12d4 HTTP Payload, URL: /GIFS/ECIR.JPG  IPHTTPS 0x2 Connected Good 0x1 129.15.96.23 192.168.1.2 IPHTTPS
  Frame: Number = 676, Captured Frame Length = 1286, MediaType = WiFi
- WiFi: [Unencrypted Data] F.....P, (I) RSSI = -49 dBm, Rate = 67.5 Mbps
  - MetaData: RSSI = -49 dBm, Rate = 67.5 Mbps
     Version: 2 (0x2)
     Length: 32 (0x20)
   - OpMode: Extensible Station Mode
      StationMode:           (...............................0) Not Station Mode
      APMode:                (..............................0.) Not AP Mode
      ExtensibleStationMode: (.............................1..) Extensible Station Mode
      Unused:                (.0000000000000000000000000000...)
      MonitorMode:           (0...............................) Not Monitor Mode
     Flags: 0 (0x0)
     PhyType: 802.11g
     Channel: 1, Center Frequency: 2412 MHz
     lRSSI: -49 dBm
     Rate: 67.5 Mbps
     TimeStamp: 08/04/2011, 22:01:19.606165 UTC
  - FrameControl: Version 0,Data, Data, F.....P(0x4208)
     Version:        (..............00) 0
     Type:           (............10..) Data
     SubType:        (........0000....) Data
     DS:             (......10........) DS to STA via AP
     MoreFrag:       (.....0..........) No
     Retry:          (....0...........) No
     PowerMgt:       (...0............) Active Mode
     MoreData:       (..0.............) No
     ProtectedFrame: (.1..............) Yes
     Order:          (0...............) Unordered
    Duration: 48 (0x30)
    DA: 1C659D CA2550
    BSSID: Novatel Wireless, Inc. 04C0AF
    SA: Novatel Wireless, Inc. 04C0AF
  - SequenceControl: Sequence Number = 889
     FragmentNumber: (............0000) 0
     SequenceNumber: (001101111001....) 889
- LLC: Unnumbered(U) Frame, Command Frame, SSAP = SNAP(Sub-Network Access Protocol), DSAP = SNAP(Sub-Network Access Protocol)
  - DSAP: SNAP(Sub-Network Access Protocol), Individual DSAP
     Address: (1010101.) SNAP(Sub-Network Access Protocol)
     IG:      (.......0) Individual Address
  - SSAP: SNAP(Sub-Network Access Protocol), Command
     Address: (1010101.) SNAP(Sub-Network Access Protocol)
     CR:      (.......0) Command Frame
  - Unnumbered: UI - Unnumbered Information
     MMM:  (000.....) 0
     PF:   (...0....) Poll Bit - No Response Solicited
     MM:   (....00..)
     Type: (......11) Unnumbered(U) Frame
- Snap: EtherType = Internet IP (IPv4), OrgCode = XEROX CORPORATION
    OrganizationCode: XEROX CORPORATION, 0(0x0000)
    EtherType: Internet IP (IPv4), 2048(0x0800)
- Ipv4: src=129.15.96.23, Dest = 192.168.1.2, Next Protocol = TCP, Packet ID = 44701, Total IP Length = 1222
  - Versions: IPv4, Internet Protocol; Header Length = 20
     Version:      (0100....) IPv4, Internet Protocol
     HeaderLength: (....0101) 20 bytes (0x5)
  - DifferentiatedServicesField: DSCP: 0, ECN: 0
     DSCP: (000000..) Differentiated services codepoint 0
     ECT:  (......0.) ECN-Capable Transport not set
     CE:   (.......0) ECN-CE not set
    TotalLength: 1222 (0x4C6)
    Identification: 44701 (0xAE9D)
  - FragmentFlags: 16384 (0x4000)
     Reserved: (0...............)
     DF:       (.1..............) Do not fragment
     MF:       (..0.............) This is the last fragment
     Offset:   (...0000000000000) 0
    TimeToLive: 46 (0x2E)
    NextProtocol: TCP, 6(0x6)
    Checksum: 63171 (0xF6C3)
    SourceAddress: 129.15.96.23
    DestinationAddress: 192.168.1.2
- Tcp: [Segment Lost]Flags=...AP..., SrcPort=HTTP(80), DstPort=49248, PayloadLen=1182, Seq=3625399474 - 3625400656, Ack=3442313006, Win=14 (scale factor 0x9) = 7168
ALL HANGS GET "SEGMENT LOST"
    SrcPort: HTTP(80)
    DstPort: 49248
    SequenceNumber: 3625399474 (0xD81734B2)
    AcknowledgementNumber: 3442313006 (0xCD2D872E)
  - DataOffset: 80 (0x50)
     DataOffset: (0101....) 20 bytes
     Reserved:   (....000.)
     NS:         (.......0) Nonce Sum not significant
  - Flags: ...AP...
     CWR:    (0.......) CWR not significant
     ECE:    (.0......) ECN-Echo not significant
     Urgent: (..0.....) Not Urgent Data
     Ack:    (...1....) Acknowledgement field significant
     Push:   (....1...) Push Function
     Reset:  (.....0..) No Reset
     Syn:    (......0.) Not Synchronize sequence numbers
     Fin:    (.......0) Not End of data
    Window: 14 (scale factor 0x9) = 7168
    Checksum: 0xF6BE, Good
    UrgentPointer: 0 (0x0)
    TCPPayload: SourcePort = 80, DestinationPort = 49248
- Http: HTTP Payload, URL: /GIFS/ECIR.JPG
    payload: HttpContentType = NetmonNull
  IPHTTPS:
677 {TCP:132, IPv4:26} 4:01:19 PM 8/4/2011 116 iexplore.exe 0x12d4  TCP 0x1 Connected Disregarded  192.168.1.2 129.15.96.23 TCP:Flags=...A...., SrcPort=49248, DstPort=HTTP(80), PayloadLen=0, Seq=3442313006, Ack=3625396554, Win=4380 (scale factor 0x2) = 17520
  Comments?

11103 {TCP:736, IPv4:735} 7:02:15 AM 8/24/2011 104 iexplore.exe  0x598 TCP 0x2 Connected Good  129.15.96.23 192.168.1.2 Flags=...A...., SrcPort=HTTP(80), DstPort=49472, PayloadLen=0, Seq=3370795655, Ack=3806480488, Win=14 (scale factor 0x9) = 7168 TCP:Flags=...A...., SrcPort=HTTP(80), DstPort=49472, PayloadLen=0, Seq=3370795655, Ack=3806480488, Win=14 (scale factor 0x9) = 7168
  Frame: Number = 11103, Captured Frame Length = 104, MediaType = WiFi
- WiFi: [Unencrypted Data] F.....P, (I) RSSI = -51 dBm, Rate = 67.5 Mbps
  - MetaData: RSSI = -51 dBm, Rate = 67.5 Mbps
     Version: 2 (0x2)
     Length: 32 (0x20)
   - OpMode: Extensible Station Mode
      StationMode:           (...............................0) Not Station Mode
      APMode:                (..............................0.) Not AP Mode
      ExtensibleStationMode: (.............................1..) Extensible Station Mode
      Unused:                (.0000000000000000000000000000...)
      MonitorMode:           (0...............................) Not Monitor Mode
     Flags: 0 (0x0)
     PhyType: 802.11g
     Channel: 2, Center Frequency: 2417 MHz
     lRSSI: -51 dBm
     Rate: 67.5 Mbps
     TimeStamp: 08/24/2011, 13:02:15.623759 UTC
  - FrameControl: Version 0,Data, Data, F.....P(0x4208)
     Version:        (..............00) 0
     Type:           (............10..) Data
     SubType:        (........0000....) Data
     DS:             (......10........) DS to STA via AP
     MoreFrag:       (.....0..........) No
     Retry:          (....0...........) No
     PowerMgt:       (...0............) Active Mode
     MoreData:       (..0.............) No
     ProtectedFrame: (.1..............) Yes
     Order:          (0...............) Unordered
    Duration: 48 (0x30)
    DA: 1C659D CA2550
    BSSID: Novatel Wireless, Inc. 04C0AF
    SA: Novatel Wireless, Inc. 04C0AF
  - SequenceControl: Sequence Number = 2338
     FragmentNumber: (............0000) 0
     SequenceNumber: (100100100010....) 2338
- LLC: Unnumbered(U) Frame, Command Frame, SSAP = SNAP(Sub-Network Access Protocol), DSAP = SNAP(Sub-Network Access Protocol)
  - DSAP: SNAP(Sub-Network Access Protocol), Individual DSAP
     Address: (1010101.) SNAP(Sub-Network Access Protocol)
     IG:      (.......0) Individual Address
  - SSAP: SNAP(Sub-Network Access Protocol), Command
     Address: (1010101.) SNAP(Sub-Network Access Protocol)
     CR:      (.......0) Command Frame
  - Unnumbered: UI - Unnumbered Information
     MMM:  (000.....) 0
     PF:   (...0....) Poll Bit - No Response Solicited
     MM:   (....00..)
     Type: (......11) Unnumbered(U) Frame
- Snap: EtherType = Internet IP (IPv4), OrgCode = XEROX CORPORATION
    OrganizationCode: XEROX CORPORATION, 0(0x0000)
    EtherType: Internet IP (IPv4), 2048(0x0800)
- Ipv4: src=129.15.96.23, Dest = 192.168.1.2, Next Protocol = TCP, Packet ID = 62246, Total IP Length = 40
  - Versions: IPv4, Internet Protocol; Header Length = 20
     Version:      (0100....) IPv4, Internet Protocol
     HeaderLength: (....0101) 20 bytes (0x5)
  - DifferentiatedServicesField: DSCP: 0, ECN: 0
     DSCP: (000000..) Differentiated services codepoint 0
     ECT:  (......0.) ECN-Capable Transport not set
     CE:   (.......0) ECN-CE not set
    TotalLength: 40 (0x28)
    Identification: 62246 (0xF326)
  - FragmentFlags: 16384 (0x4000)
     Reserved: (0...............)
     DF:       (.1..............) Do not fragment
     MF:       (..0.............) This is the last fragment
     Offset:   (...0000000000000) 0
    TimeToLive: 46 (0x2E)
    NextProtocol: TCP, 6(0x6)
    Checksum: 46808 (0xB6D8)
    SourceAddress: 129.15.96.23
    DestinationAddress: 192.168.1.2
- Tcp: Flags=...A...., SrcPort=HTTP(80), DstPort=49472, PayloadLen=0, Seq=3370795655, Ack=3806480488, Win=14 (scale factor 0x9) = 7168
    SrcPort: HTTP(80)
    DstPort: 49472
    SequenceNumber: 3370795655 (0xC8EA4287)
    AcknowledgementNumber: 3806480488 (0xE2E24868)
  - DataOffset: 80 (0x50)
     DataOffset: (0101....) 20 bytes
     Reserved:   (....000.)
     NS:         (.......0) Nonce Sum not significant
  - Flags: ...A....
     CWR:    (0.......) CWR not significant
     ECE:    (.0......) ECN-Echo not significant
     Urgent: (..0.....) Not Urgent Data
     Ack:    (...1....) Acknowledgement field significant
     Push:   (....0...) No Push Function
     Reset:  (.....0..) No Reset
     Syn:    (......0.) Not Synchronize sequence numbers
     Fin:    (.......0) Not End of data
    Window: 14 (scale factor 0x9) = 7168
    Checksum: 0x14A8, Good
    UrgentPointer: 0 (0x0)
11104 {HTTP:737, TCP:736, IPv4:735} 7:02:15 AM 8/24/2011 1286 iexplore.exe HTTP Payload, URL: /GIFS/ECIR.JPG  0x598 HTTP 0x2 Connected Good 0x1 129.15.96.23 192.168.1.2 [Segment Lost]Flags=...AP..., SrcPort=HTTP(80), DstPort=49472, PayloadLen=1182, Seq=3370798575 - 3370799757, Ack=3806480488, Win=14 (scale factor 0x9) = 7168 HTTP:HTTP Payload, URL: /GIFS/ECIR.JPG
  Frame: Number = 11104, Captured Frame Length = 1286, MediaType = WiFi
- WiFi: [Unencrypted Data] F.....P, (I) RSSI = -51 dBm, Rate = 67.5 Mbps
  - MetaData: RSSI = -51 dBm, Rate = 67.5 Mbps
     Version: 2 (0x2)
     Length: 32 (0x20)
   - OpMode: Extensible Station Mode
      StationMode:           (...............................0) Not Station Mode
      APMode:                (..............................0.) Not AP Mode
      ExtensibleStationMode: (.............................1..) Extensible Station Mode
      Unused:                (.0000000000000000000000000000...)
      MonitorMode:           (0...............................) Not Monitor Mode
     Flags: 0 (0x0)
     PhyType: 802.11g
     Channel: 2, Center Frequency: 2417 MHz
     lRSSI: -51 dBm
     Rate: 67.5 Mbps
     TimeStamp: 08/24/2011, 13:02:15.626528 UTC
  - FrameControl: Version 0,Data, Data, F.....P(0x4208)
     Version:        (..............00) 0
     Type:           (............10..) Data
     SubType:        (........0000....) Data
     DS:             (......10........) DS to STA via AP
     MoreFrag:       (.....0..........) No
     Retry:          (....0...........) No
     PowerMgt:       (...0............) Active Mode
     MoreData:       (..0.............) No
     ProtectedFrame: (.1..............) Yes
     Order:          (0...............) Unordered
    Duration: 48 (0x30)
    DA: 1C659D CA2550
    BSSID: Novatel Wireless, Inc. 04C0AF
    SA: Novatel Wireless, Inc. 04C0AF
  - SequenceControl: Sequence Number = 2339
     FragmentNumber: (............0000) 0
     SequenceNumber: (100100100011....) 2339
- LLC: Unnumbered(U) Frame, Command Frame, SSAP = SNAP(Sub-Network Access Protocol), DSAP = SNAP(Sub-Network Access Protocol)
  - DSAP: SNAP(Sub-Network Access Protocol), Individual DSAP
     Address: (1010101.) SNAP(Sub-Network Access Protocol)
     IG:      (.......0) Individual Address
  - SSAP: SNAP(Sub-Network Access Protocol), Command
     Address: (1010101.) SNAP(Sub-Network Access Protocol)
     CR:      (.......0) Command Frame
  - Unnumbered: UI - Unnumbered Information
     MMM:  (000.....) 0
     PF:   (...0....) Poll Bit - No Response Solicited
     MM:   (....00..)
     Type: (......11) Unnumbered(U) Frame
- Snap: EtherType = Internet IP (IPv4), OrgCode = XEROX CORPORATION
    OrganizationCode: XEROX CORPORATION, 0(0x0000)
    EtherType: Internet IP (IPv4), 2048(0x0800)
- Ipv4: src=129.15.96.23, Dest = 192.168.1.2, Next Protocol = TCP, Packet ID = 62249, Total IP Length = 1222
  - Versions: IPv4, Internet Protocol; Header Length = 20
     Version:      (0100....) IPv4, Internet Protocol
     HeaderLength: (....0101) 20 bytes (0x5)
  - DifferentiatedServicesField: DSCP: 0, ECN: 0
     DSCP: (000000..) Differentiated services codepoint 0
     ECT:  (......0.) ECN-Capable Transport not set
     CE:   (.......0) ECN-CE not set
    TotalLength: 1222 (0x4C6)
    Identification: 62249 (0xF329)
  - FragmentFlags: 16384 (0x4000)
     Reserved: (0...............)
     DF:       (.1..............) Do not fragment
     MF:       (..0.............) This is the last fragment
     Offset:   (...0000000000000) 0
    TimeToLive: 46 (0x2E)
    NextProtocol: TCP, 6(0x6)
    Checksum: 45623 (0xB237)
    SourceAddress: 129.15.96.23
    DestinationAddress: 192.168.1.2
- Tcp: [Segment Lost]Flags=...AP..., SrcPort=HTTP(80), DstPort=49472, PayloadLen=1182, Seq=3370798575 - 3370799757, Ack=3806480488, Win=14 (scale factor 0x9) = 7168
    SrcPort: HTTP(80)
    DstPort: 49472
    SequenceNumber: 3370798575 (0xC8EA4DEF)
    AcknowledgementNumber: 3806480488 (0xE2E24868)
  - DataOffset: 80 (0x50)
     DataOffset: (0101....) 20 bytes
     Reserved:   (....000.)
     NS:         (.......0) Nonce Sum not significant
  - Flags: ...AP...
     CWR:    (0.......) CWR not significant
     ECE:    (.0......) ECN-Echo not significant
     Urgent: (..0.....) Not Urgent Data
     Ack:    (...1....) Acknowledgement field significant
     Push:   (....1...) Push Function
     Reset:  (.....0..) No Reset
     Syn:    (......0.) Not Synchronize sequence numbers
     Fin:    (.......0) Not End of data
    Window: 14 (scale factor 0x9) = 7168
    Checksum: 0xD681, Good
    UrgentPointer: 0 (0x0)
    TCPPayload: SourcePort = 80, DestinationPort = 49472
- Http: HTTP Payload, URL: /GIFS/ECIR.JPG
  - payload: HttpContentType = NetmonNull
     HTTPPayloadLine: 4ïücvÖ#8íÒª×wªx!fÕ.î Ô-`µ’whð˜URÇT1Ç ªsxXLdß«Ç(Ü’¤YVú‘ÈèGZ

Similar Messages

  • I am unable to download Acrobat XI Standard purchased 19Feb15 & unable to locate on your web site simple steps to do this - please help; what am I not doing?

    I am unable to download Acrobat XI Standard purchased 19Feb15 & unable to locate on your web site simple steps to do this - please help; what am I not doing?

    Make sure you have cookies enabled and clear your cache.  If it continues to fail try using a different browser.

  • Why in address bar in not the url but "go to the web site"? How can I see url in the address bar?

    Why in the address bar is not URL but "go to the web site"? How can I see the URL in the address bar?

    those are some addons that other users have reported to cause the same problem in the past: Gom player, Ask Toolbar, DivX (Plus) Web Player, RealPlayer Browser Record Plugin...
    in case you have one of them present, try to disable/remove it - otherwise you could disable all your extensions & reenable them one by one (a restart of the browser might be necessary after each step) until you find the culprit.

  • Product Database Management For Manufacturers Web Site - How do I do this W/ Templates?

    In short, I have an excell database of product. I am
    developing a web site for a factory with many products. I have
    never used a database to fill specific template data, except for
    3rd party shopping carts...
    So, how do create a database, upload it to the site, and
    allow users to access product information? Looking for your typical
    database to template set up with tags in specics spots withint he
    HTML of the template that reference the columns of data in a
    specific row of the database.
    I basically need a shipping cart, but with no "BUY" or "VIEW
    CART" buttons.
    Thanks!

    I'm not an expert on this but you need to know what sort of
    server
    you're going to be using. The server can drive what database
    you're
    going to use.
    MySQL?
    MSSQL?
    Access?
    There are others.
    If you're on a PHP server you may want to stay with MySQL.
    Talk to your
    server admin to see what is installed. MySQL has a control
    panel called
    "Workbench" that can manage the database.
    MSSQL uses Enterprise Manager to administer the database.
    Whether it's MySQL or MSSQL, each will be able to import
    data; same can
    be said for Access. Access is probably the least flexible; in
    other
    words, it's not built for as high of performance but for
    small sites
    without a lot of traffic, it's probably fine. With Access,
    you basically
    build the tables and everything on your own computer and then
    upload the
    mdb file to the server.
    Once you have the database, you can start to build a page in
    Dreamweaver. The first thing you should do is pick your
    server script
    language VBScript, php, ... You then create a connection to
    the
    database. Once the connection is made, those tables become
    available to
    drag and drop on your page. From there you can do repeats and
    form
    columns of data to display products.
    That's it in a nutshell.

  • HT1918 I went to my account and changed from Credit Card to Paypal but it hangs on web site Telling me "One moment please"

    Just wanted to change over from credit card to paypal and nothing happens

    Hey mha007,
    thanks so much for taking the time to respond. Out of desperation, I called my ISP and they removed it from my computer. Man, I wish I knew what caused this. I would share my screen with you but all info, I've either deleted or it was removed when ATT Support Tech did their stuff.
    Again, thanks for your kindness. Leeflea

  • Re-opening most recent files/web sites--how can i disable this?

    when I close a window and then reopen it, or when i log out and then log back in, the most recent thing I was looking at from before immediately pops open.  That is not necessarily the way I would like it to work--didn't do that with Snow L.  How can I disable this?

    In System Preferences > General > uncheck Restore windows when quitting and re-opening apps.
    Note that this preference affects all apps.
    Regards,
    Captfred

  • When I try to go to ITunes store web site dozens of tabs of this site open immediately and the browser freezes

    When I'm in the store and click the "View in ITunes"
    button in App Preview, a seemingly endless number of tabs open and navigation is impossible. Help, please.

    You will probably have an incorrect action set for a content type, it will be incorrectly set to "Use Firefox". For details on fixing it see the "Change the action for a content type" section of the following link - https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

  • HT5242 so it tells me to go to this web site to downlode to eliminate this malware but i just get this page

    How do I down lode this anti malware fix

    To install software updates on OS X:  > Software Update
    If the Apple Java update is not offered, then you don't have Java installed, or you're on a release of OS X prior to 10.6, or you're using a local Software Update Server or local Reposado server and it hasn't cached the Apple upate yet.  (And if you don't know what the Software Update Server or Reposado servers provide, then you're probably not one of those.)
    Here's the most recent Apple update on this: About the security content of Java for OS X 2012-003 and Java for Mac OS X 10.6 Update 8 (HT5247)
    This particular Java 2012-003 download apparently hasn't reached the Apple downloads servers yet, based on some of the chatter, so there's not yet a place to download it other than via Software Update.

  • Firefox on iMac keeps defaulting to mobile version of web sites - i want the full desktop version of web site - how do i set this up?

    Question says it all - i've gone all through settings and can find nothing that looks like it will allow a choice

    hey,
    Type '''about:config''' in address bar and hit enter.
    A page will open which has a search box at top, in that box type '''network.http.accept.default''' and when that option appears below '''Right click on it and choose the option reset'''.
    If this doesn't solve your problem you can additional view the link below or get back to us.
    [http://rosamundwo.com/2011/firefox-always-open-mobile-website-solved/ The link]
    Hope it helps.

  • Flash embed in my web-site

    I recently add two flash (.swf) file in to my web-site of selling ink for cartridges, But it seems they are not well embed in the posistion of the web-site front page. Why this happen, is there anyone could give me some suggestions?
    Rink

    I see the Important Notice in every browser I look at.  There does not appear to be anything wrong with it.  If you cannot indicate more specifically what you see is wrong with it, it looks fine to me.

  • How to read the data in a txt file on a web site?

    I want to extract the numbers located in txt files on a web site. It's a normal url. Not a ftp.
    Does anyone know how to do it?

    Hi Tom,
    What do you want to extract from the text file??
    I wanted to extract an IP address from a pearl script from my FTP server and this was the vi that I used .I dont know if you are trying to do the same?
    Here is the vi.It is in LV 7.1
    Hope its helps .
    Good luck.
    ohiofudu.
    Certified LabVIEW Architect
    Certified TestStand Developer
    Attachments:
    PublicIP-Adresse.vi ‏31 KB

  • How do I get to the contacts manager on VZW web site? I last used it months ago but it doesn't work now.

    A family member has an LG Revere flip phone, and when we need to add several or remove several contacts, it USED to be easier to go into the contacts management page on the VZW web site, but when I went to look tonight, it kept showing the Backup Assistant information for the wrong phone, and ONLY showing me the (nonexistent) contacts for that other phone. The Revere is the only non-smartphone on the account, so it's the only phone I have ever wanted to use the backup assistant and online contacts manager for.
    Now that I think of it, tonight it was also asking me to agree to use the Backup Assistant, which I thought was strange because (as I said) we were already using it for that one phone but not the others. But when i agreed it showed me the (default -- generic Verizon) contacts for MY phone, not the one I was looking for. When I have tried several different ways to get to the other phone information, I have been seeing more and more website errors.
    I guess there was a glitch somewhere... I will try again but I'm putting this out there in case someone has an answer.

    I have tried clicking all around and I cannot get to the contact manager at all anymore. Now when I click to it I go to My Verizon Online Sign In - Verizon Wireless (not sure if that link works here) and the web site says:
    You are seeing this page for one of the following reasons:
    1) The Sync & Connect feature does not appear on your account. To add this feature click on Home above, then click on the Change Features link.
    2) The Sync & Connect feature has recently been added to your account and the request is in process or pending completion. Please sign in again later.
    There's no "Home" or "Change Features" visible on that page. The more I do the stranger the site has gotten. This time it kept telling me I needed to sign back in, but then it would continue acting as normal (I AM signed in).
    I suppose there's a glitch.

  • Most times when trying to access web sites get page stating Server Not Found..... Try Again. As soon as I hit try again I always get the web site - annoying!!!

    When I try to google websites OR even try to access my email I will be taken to a notice which states "Server Not Found" with several explanations with a TRY AGAIN button at the bottom. When I hit the try again button I am immediately taken to the web site or to my email. This happens constantly and very rarely can I access a web site or my email without this frame popping up.

    This is a very generic error message. 
    What user you are trying to search. Are you using username, display name or email address when searching
    Was any domain related changed done
    What if that users tried to logon to sharepoint site. 
    Does this error occur with all the account when you click edit? If not, based on the error,
    the user account which might be removed from Active Directory or renamed accidentally. Please have a check.
    Try to follow below:
    http://architectevangelist.wordpress.com/2010/12/07/sharepoint-2010-the-specified-user-or-domain-group-was-not-found/

  • How to upload images to your own Web site?

    I recently bought a Creative WebCam NX Pro. Installation was fine, the product works great.
    The problem is that I want the cam to upload images to my own web site, www.fogwatch.com. This is basically a weather cam, with images uploading regularly.
    The problem is that the Creative software creates a new name for the image file every time it uploads a new image -- 0.jpg, 02.jpg, 03.jpg, etc. The problem is that the HTML code on my Web site is programmed to recognize only one file name for the Web cam image -- image.jpg. With my old Logitech cam, the software would overwrite the old image with the new image with the same file name, and every was fine.
    So, with the Creative software, I would have to change the file name in my HTML code every time the cam uploaded a new image?and that's impossible. I don't want to use the default Creative web page that it uploads images to as that doesn't fit in my site design.
    Is anyone using a Creative camera to upload images to their own Web site? How are you doing it's

    Bcasey,
    I spent some time working with Webcam monitor and have found the way to do what you are wanting. You need to set up your FTP settings, arrange for a continuous upload and then go over to the custom web page section. Put a checkmark in "upload custom webpage" and go to the section where it says how many pictures to display. Set this to and then remove the checkmark from "upload custom webpage". The program will now upload a single file called img.jpg updated at the interval you choose.
    Jeremy

  • Firefox always say web site can't be found ! why is this

    my firefox has problem going into other web site ! it always display web site can't be found .
    == URL of affected sites ==
    http://

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, maybe after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Maybe you are looking for

  • Month View:start and END times

    Here is feature that i really need In the Month view: The option to have start and end times displayed. Now that their is no info drawer i have open and info drawer to see when the event is supposed to end. I have a lot of events in a day and some ar

  • How can I put Locale.loadString("IDS_001") into button.label

    I am retrieving the Locale from the system, and need to place the fields of the Array into their respective places. One of these being for example, IDS_001 This works, and returns what I'd probably expect. Although why it returns multiple instances I

  • Motion Wont even open

    After i have installed motion and try to open it, it says has encounterd an unxepected error and must close, re-open, try again. Help!

  • Ship-to (KUNWE) not transferred in COPA (missing in CE1* table and COPA documents)

    I am trying to solve very strange problem  - in COPA some billing documents got transferred with missing ship-to characteristic (KUNWE). The ship-to is there when looking at the FI document profitabilty segment section, and also is getting transferre

  • Merged dims incorrect results?

    BOEXI31 SP3 Report has 12 queries,  6 KPIs retruning data for cur month and  YTD. Dims: Month, Organization, KPI Measures: num, denom,  value, target I then create a calc by "num/denom" For this calculation, if I unmerge the dims, I get the correct r