Migrate Classificaiton using ICE
Hello:
I have a question regarding migrating the classification for documents in KM using the ICE tool. I have classified a bunch of content into a taxonomy and now I would like to migrate all of that content into my stage environment. Using the ICE tool (via Offline package) I am able to migrate the taxonomy and the content, but not the classification settings for the content.
Does the ICE tool support the migration of the classification settings?
Thanks!
Matt
Hi Matt,
as far as I know this is not supported as ICE is a standard-protocoll.
But you can transport your taxonomy including queries starting with SPS10. After that the classification-process will do the work
Hope this helps
Karin
Similar Messages
-
Folders affected after KM Content Transport using ICE Methodology
Hi All,
I am encountering a strange behaviour when I use ICE methodology to Transport KM Content.
When I migrate a particular folder using ICE package, the folder gets transported successfully to the target system, but after the Transport, the other folders in the target system are getting affected.
Can anyone tell me the reason for this starnge behaviour of ICE package.
Any kind of help would be greatly appreciated.
Regards,
AdrenFollow below defined process
Go to -
>Content Administration--->KM Content->go to ice(folder)->go to Syndicator->go to Global Offer> Clear (delete) all folder shortcut links>above breadcum you will see Folder command click there-> Select New>Select Link>Browse and select the folder you want to transport->select the folder link and click on Complete Package--> file will be downloaded
This file you can upload in other server through Content Management---->Package Upload---> Browse and select file and upload
I think you must be doing the same process but you might not be clearing old folder links which can cause the problem and replace other folders whose link is there available in Global Offer folder.(This step in process is highlighted with underline)
Just Clear and try once ....
Regards,
Tushar Dave -
Hi,
I am needing to use ICE to move some content from an EP5 SP5 system to an upgraded EP5 SP6 clone so we can migrate to NW2004 SPS14. Someone prior to me has removed access to ICE from within the Portal navigation in the roles. I know that there is a direct URL to use ICE in EP5 SP5, but have not been able to find it.
Will someone with great knowledge please advise me as to where I may find the direct URL to ICE in EP5 SP5?
Thank you in advance for any help.
Best Regards,
RickHi Rick,
This 'should' be pretty close. I've not used EP5 for over a year now...
http://<servername>:<port>/irj/servlet/prt/portal/prtroot/com.sapportals.km.navigation/ice
Regards,
Graham -
Error while migrating users using CSSImportExportUtility
Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz -
Just got a new MacMini. Migrated files using Time Machine. However, now, on Launchpad, I see several Firmware updates that were relevant for the old machine, but not for the new one. How do I get rid of these updates? They won't delete!
Only thing I can think of is trying this Lion trick...
http://www.cultofmac.com/106030/how-to-nuke-lions-launchpad-and-start-over/10603 0/ -
How do you increase the maximum number of migration batches using EAC?
When I try to run a new batch, I'm getting the following error message:
The maximum number of migration batches is already running. Please remove a batch before you add another one.
How do I increase the maximum number of migration batches using EAC? Thanks for your help.Hi WinndowsGuy,
Is there any update on this thread?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Re:content transfer using ICE service
Dear all,
we have used ICE online to transfer our contents.
The contents are transferred.
The ACL and metadata properties modified by is transferred correctly,but showing created by as the id which has done the trasfer .
Is there any option to transfer the data regarding Created by also.
points would be rewarded.
Regards
swetha polaHi Hung
I checked the sap note.
I am using ICE offline only .
the second thing is i checked in the repository manager it is using db mode to store the data .
and as its under /documnets ita a cm store .
one thing i want to know is in the repository manager we see some repository services like feedback,discussion ...there i dont see created by .
is that the cause .
I am getting the deatils of the person who carried out the transfer for created by
Can u give some idea on this.
Thanks in advance
regards
swetha pola.
Edited by: swetha pola on Aug 6, 2008 3:11 PM -
Steps to migrate lsmw using Idocs
hello i need to migrate lsmw using idocs ?can anybody please tell me the ateps in idoc method
It's very urgent , help plz.
Thanks in Advance
jdkumargoto--> lsmw.
settings--->idoc inbound processing
here enter file port, trfc port, partner name.
then follow below steps(as suggested above by a frnd)
Project : 060_BUS_TRANS
Subproject : SERVICE_TICKET
Object : SRV_TICKET_ZSVT
click on the execute button .you will reach the screen :
The screen shows the 15 steps to Run the lsmw
Step 2) select the first step ( Maintain object attributes) and click the execute button.After clicking on the execute button you will reach at. the screen
Here you have to specify ( Message type and basic type)
click on the BACK button
Step 3) select the 2nd step ( Maintain source structures) and click the execute button
Here you have to specify the source structures.
Step 4) Select the 3rd step ( Maintain source fields) and click on the execute button :
Here you have to specify the fields present in the source structure
Step 5) select the 4th step ( Maintain structure relationship ) and click on the execute button :
Here you have to specify relationship between source and target structures
Step 6) select the 5th step ( Maintain field mapping ) and click on the exécute button :
Here you have to map the fields between source and target structure. Also you have to apply conversion rules here if any
STEP 7) select the 6th step and click on the exécute button
Here you can define any fixed value or user define routines
Step 8) select the 7th step ( Specify files) and click on the exécute button :
At This screen we have to specify the files for This we should be in change mode .So please click on the button shown in the above screen. After clicking on This button you will be in change mode and will be able to specify the files :
Step 9) select the 8th step ( Assign files) and click on the exécute button
For assigning files yoy should be in change mode do the same thing click on the button as shown in the above screen :
Then assign the files to different structures.
Step 10 ) select the 9th step ( Read Data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Again click on the exécute button . After clicking on the exécute button you will reach to the next screen
Here you will see data is read.
Step 11) select the 10th step ( Display read data) and click on the exécute button :
Here you can see your test data present in test files assign to source sturcture
Step 12 ) select the 11th step ( Convert data) and click on the exécute button :
After clicking on the exécute button you will reach to the screen
Click on the exécute button as shown on the : After click on the exécute button you will reach to the next screen
Data is converted
Step 12th ( Display converted data is same as Display read data )
Step 13 ) select the 13th step ( Start idoc generation) and click on the exécute
button :
At this step Idoc is generated using converted data
Step 14) select the 14th step ( Start idoc processing ) and click on the exécute button :
After clicking on the exécute button you will reach to the screen :
And then click on the exécute button : After clicking on the exécute button you will reach to the final processive screen
If data is processed correctly you will see ( 53 Status message with green sign -
Migrating db using golden gate
Hi,
I heared about a word that is golden gate. which is used for migration.
how can migrate db using golden gate..? and where it has to install. is there any other features of this.
please let me know
thank youHi;
Please see:
Migration of an Oracle Database Across OS Platforms [ID 733205.1]
http://www.databasejournal.com/sqletc/article.php/3780766/Successful-Database-Migration.htm
Regard
Helios -
Can i use ICE Faces and JBoss RichFaces combinely in JSF
hi
I can use ICE Faces and JBoss RichFaces in Jsf.But my requirement is that can i use both(ICE Faces&JBoss RichFaces) components in single .jspx page.is that possible
plz tell me
regards
niranjanthanks for your reply
plz clarify what it means "JSF Implemetation".i.e for example can i place an Rich Face Component In ICEFaces Form
<ice:form>
<rfc:inputText/>
</ice:form>
because we have some components in IFaces and some in JBoss Rich Faces which are needed for our application.
Thanks & regards
nsanagari -
Is it possible to transport KM workflows using ICE?
Hi All,
Is it possible to transport KM workflows using ICE.
I am using offline transport. The permissions and properties are getting transfered. But the approval process which I have configured is not getting transported.
Can any one tell me why its happening like this?
Regards
GeorgeHi jan Bo ,
i think you are looking for the same stuff given in below link
Re: How to download the SAP client into text file
Regards,
S.Manu. -
Using ice-Package for import in other systems?
Hi, we would like to import ice-packages into other applications. No specific applications are meant, but we are researching other usage possiblities for our current KM-Content.
What's the format/content of an ice-package?
How can it be read by other applications?
Thanks for your replies.
Best regards
Sandrahi
An XML based distribution protocol that enables controlled distribution of information from a content provider (syndicator) to a set of subscribers (server to server)
Defines
roles and responsibilities of syndicators and subscribers
format and method for content exchange
Provides support for management and control of syndication relationship
Catalog A set of subscription offers. A Subscriber obtains
a catalog from a Syndicator, and uses the offers within
the catalog to initiate the ICE subscription protocol.
ICE/HTTP The specific binding of the ICE protocol to the HTTP protocol.
Package A single delivery instance of a group of items. For example,
a single issue of a parts manual or a single set of headlines.
A package is the atomic unit of information distribution in ICE.
Payload A protocol structure encapsulating a set of logical ICE
operations delivered at discrete intervals. An instance
of an XML document formatted according to the protocol
definitions contained in this specification.
Subscriber One of the two parties in an ICE relationship
(the other one being the Syndicator). The Subscriber uses
ICE to obtain information and content from the Syndicator.
Subscription Precise meaning directly related to the corresponding protocol
data structure; do not confuse the usage of an agreement to
deliver a package sequence from a Syndicator to a Subscriber.
There may be many independent subscriptions between a
Syndicator and a Subscriber.
Subscription offer A proposed set of parameters for a particular subscription.
Within ICE, the term subscription offer has the term "offer" in
this specification with the more generic and abstract concept of
offers in the business world sense.
Syndicator One of the two parties in an ICE relationship (the other one
being the Subscriber). The Syndicator uses ICE to send information
and content to the Subscriber.
A syndicator bundles content (resources) as offers.
A subscriber requests a catalog of these offers and wishes to subscribe to one of them.
The syndicator assigns a subscription ID and accepts the subscription.
The subscriber pulls content by requesting current state of his subscription.
The syndicator answers with payloads containing packages of items and updates the subscribers state.
Create and edit offers
Assign a delivery method and an automatic delivery schedule to an offer
Admit subscribers
Allow anonymous access to content offers
Maintain syndicator properties (e.g. server name,...)
Establish a connection to a syndicator
Subscribe to an offer in the content catalogue of a syndicator
Edit or delete existing subscriptions
Maintain subscriber properties.
Hope this helps you .please don,t forget to give points
with regards
subrato kundu -
HT4413 Does Migration Assistant use a lot of internet data?
We're on a set limit and don't want to exceed it..
Anyone with prior experience would be greatly appreciated.Welcome to the Apple Support Communities
Migration Assistant doesn't use Internet. If you want to use Migration Assistant via Wi-Fi or Ethernet, Migration Assistant uses the router to migrate data to the other Mac that has to be connected to the same router -
I currently use both a MacMini at home and a MacBook Pro while I'm on the road.
My email is sync'd via Google Mail, but I have photo's and documents (for my projects) that are not sync'd between the two computers.
I use Time Machine with difference external drives to backup each computer.
I would like to migrate to using only the MacBook but I need to make sure that both machines are sync'd and my photo's and documents are the same on both.
Any help is greatly appreciated.
The Mac Mini is running OSX 10.7.5 and the Mac Book is runing OSX 10.8.3
Thanks in advance
S4DucatiYou could try using sync/backup software that could do that automatically. You have several from which to choose that might work best:
Suggested Backup Software
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
7. Sync Folders Pro 2.9.3
8. Folder Sync v1.4.4
9. SyncTwoFolders 1.8.4
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. -
Migrating owb using import/export
Hi All,
Please could anyone throw some light on how to Migrate owb using import/export.
we are presently having owb installed on 32 bit database with RHEL 4 os. we planning to migrate to 64 bit database with 0el5 os.
we have planned to do export/import. my question in this is could we use export/import for migrating owb schemas with owb installed in the new server.
Thanks in advance,
Regrads,
PrajwalHi Prajwal,
I do not recommend exporting and importing the owb repository schema, it will not work properly.
First, create a new repository on the new db. Then export your projects (make sure you select include all dependencies) using owb metadata export and evetnually import it into the new database.
Note that you wil loose all deployment status information.
If you also have target schemas in your db, then unregister them first before migrating the data to the new db. In the new db you have to register them at the new repository. Finally you have to redeploy all mappings (using replace) in order to make them work again.
Regards,
Carsten.
Maybe you are looking for
-
How to rpad spaces for the below code
begin dbms_output.put_line(rpad(null,10,' ') ||'b'); end; The output is not appending spaces. I have a requirement to append spaces between columns. Some times the column will be empty. In that case the space is not getting appended.Please let me kno
-
Problems with Patch 7.0.3 for PSE 7.0
I'm still using PSE 7.0. Secunia PSI told me, that the .exe file is unsecure and I should apply the patch mentioned above. I did so and afterwards the system told me the program is uptodate. So did PSE 7.0 when I looked for updates. But still Secunia
-
Call appModule function inside a managed bean?
How can I call an Application Module public function from a managed bean?
-
How to Use Backslah() in webi report formula
Hi My client is using web intelligence XI 3.1 SP2. I have a formula in a report as: =Sum(If([Level 08 Node] InList ("Correlation & Index";"EM\FX Option JV";"Short Dated Exotic Options";"Long Dated Options";"Short Dated Vanilla Options";"Options");[SR
-
Can I extract VBAP-EAN11 based on the country Field ?
Hello, Is there a way I can extract VBAP-EAN11 from a different field dependent on the country KNA1-LAND1 or any other table where I should be able to extract EAN11 based on the country. Please suggest, if i can extract the data with this condition o