Migrating ADF Security Policies to Active Directory

Hi,
Curently I'm searching whether it is possible to migrate ADF security policies created during development to a weblogic production environment with Active directory as the identity store.
Whilst I did find documentation relating to standalone WLS, yet no documentation seem to be available for migrating ADF policies to an Active directory. Does anyone has links to documentation that guide throguh this security policy migration.
Thanks.

Similar Messages

How to use ADF Security policies in OID Ldap

Hello
My application uses ADF security policies created by Jdeveloper ADF Security Wizard and page definition Edit Authorization menu. The application runs as expected using file based system-jazn-data.xml. I used the JAZNMigrationTool in order to migrate XML based policies to LDAP based policies. LDIF file was generated by the tool and then using the LDAPModify command the file was uploaded to the OID. No errors were generated during this process.
I used Oracle Directory Manager in order to examine the migration result, and compare the output to that described by
Introduction to ADF Security in JDeveloper 10.1.3.2
An Oracle JDeveloper Article
Written by Frank Nimphius, Oracle Corporation
February, 2007
I was expecting to find Read, Update privileges in the orcljaznpermissionaction and the attribute name in the orcljaznpermissiontarget as shown in Fig 15 ADF security entry in OID.
to narrow down the source of the issue, we examine the LDIF file, and there was no reference to these entries. Below is one example entry from the LDIF file
dn: orclguid=EF37EAA603C611DDBFAE635A1BB60EE0,cn=Permissions,cn=Policy,cn=JAZNContext,cn=Products,cn=OracleContext,dc=realsoft,dc=com
changetype: add
objectclass: orcljaznpermission
objectclass: groupofuniquenames
objectclass: top
cn: EF37EAA603C611DDBFAE635A1BB60EE0
orclGuid: EF37EAA603C611DDBFAE635A1BB60EE0
orcljaznjavaclass: java.security.UnresolvedPermission
orcljaznpermissiontarget: oracle.adf.share.security.authorization.AttributePermission
orcljaznpermissionactions:
uniquemember: orclguid=EF37EAA203C611DDBFAE635A1BB60EE0,cn=Grantees,cn=Policy,cn=JAZNContext,cn=Products,cn=OracleContext,dc=realsoft,dc=com
Note that the orcljazpermissionactions is empty and orcljaznpermissiontarget does not really specify the actual attribute name.
The system-jazn-data.xml includes all entries correctly.
rgds

Eurika
finally solved,
runing the JAZNMigrationTool requires setting the correct classpath,
Setting the classpath to the following
C:\>Set CLASSPATH=d:\jdevstudio10132\j2ee\home\jazn.jar
allows you to run the Jaznmigrationtool successfully, however you will find that the generated LDIF file does not include the premission actions (Read, Update ...)
if however, you add the adfshare.jar to the classpath
C:\>Set CLASSPATH=d:\jdevstudio10132\j2ee\home\jazn.jar;d:\jdevstudio10132\BC4J\lib\adfshare.jar
now the tool will migrate the permission policies , the following shows an extract from the LDIF file
dn: orclguid=A5E662E204D411DDBF8807BC4864C5C2,cn=Permissions,cn=Policy,cn=JAZNContext,cn=Products,cn=OracleContext,dc=realsoft,dc=com
changetype: add
objectclass: orcljaznpermission
objectclass: groupofuniquenames
objectclass: top
cn: A5E662E204D411DDBF8807BC4864C5C2
orclGuid: A5E662E204D411DDBF8807BC4864C5C2
orcljaznjavaclass: oracle.adf.share.security.authorization.AttributePermission
orcljaznpermissiontarget: AppModuleDataControl.VRoleAuthorrizationsView1.RanDateTo
orcljaznpermissionactions: read,update
uniquemember: orclguid=A5E662E104D411DDBF8807BC4864C5C2,cn=Grantees,cn=Policy,cn=JAZNContext,cn=Products,cn=OracleContext,dc=realsoft,dc=com
Ammar Sajdi
www.e-ammar.com/Oracle.html

Migrating ADF Security to WLS using OID

I have seen a number of posts on this forum regarding deploying an application which has ADF Security enabled to a stand-alone WebLogic server, but none of them seem to address the following.
I have an application in JDeveloper which uses an XML-based identity store and policy store. I have a stand-alone WLS which is connected to OID. I am trying to migrate the credential store and policy store to the OID configured for my stand-alone WLS. The various blogs and OTN articles mentioned frequently in this forum regarding ADF Security address configuring OID in WLS, as well as how to migrate security to XML-based providers on WLS. However, I have not seen any information on how to migrate security to OID in WLS. I have a few questions in particular:
1) JDeveloper online help has limited information for modifying the jps-config.xml to have a destination context, service instance, and service provider for LDAP (OID). It has configuration parameters for “JpsFarmName” and “JpsRootNodeName”. What are these used for, and what should the values be?
2) Does the jps-config.xml file need to be modified in WLS (i.e. <Domain>/config/oracle/jps-config.xml)? Is this file even used at runtime by WLS?
3) How does WLS know to use OID for obtaining credential, identity, and policy information instead of system-jazn-data?
Any information on this topic would be very appreciated!
Thanks,
Erick

Hi,
I am using migrateSecurityStore for policy migration from xml to OID.
migrateSecurityStore(type="policyStore",configFile="t2p-policies.xml",src="XMLsourceContext",dst="LDAPdestinationContext")
when I run above command I am getting following error.
Jul 9, 2009 11:00:08 AM oracle.security.jps.internal.config.util.BootstrapConfig
urationUtil getCredentialFromBootstrapWallet
SEVERE: Cannot get credential. Reason java.security.PrivilegedActionException: o
racle.security.jps.service.credstore.CredStoreException.
COMMAND FAILED due to an unknown reason, Check the stack trace for details
Traceback (innermost last):
File "<console>", line 1, in ?
File "D:\JDEVST~2\JDEVEL~1\common\wlst\jpsWlstCmd.py", line 780, in migrateSec
urityStore
File "D:\JDEVST~2\JDEVEL~1\common\wlst\jpsWlstCmd.py", line 752, in migrateSec
urityStoreImpl
at oracle.security.jps.internal.policystore.ldap.LdapPolicyStore.<init>(
LdapPolicyStore.java:230)
at oracle.security.jps.internal.policystore.ldap.LdapPolicyStoreProvider
.getInstance(LdapPolicyStoreProvider.java:108)
at oracle.security.jps.internal.policystore.ldap.LdapPolicyStoreProvider
.getInstance(LdapPolicyStoreProvider.java:55)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServ
iceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.DelegatingContextFactoryImp
l.findServiceInstance(DelegatingContextFactoryImpl.java:61)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getConte
xt(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getConte
xt(ContextFactoryImpl.java:206)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getCo
ntextFromConfig(JpsContextFactoryImpl.java:171)
at oracle.security.jps.internal.tools.utility.util.JpsHelper.getContextF
romConfigObj(JpsHelper.java:115)
at oracle.security.jps.internal.tools.utility.mgrs.JpsPolicyAPIManager.g
etPolicyStoreForDestination(JpsPolicyAPIManager.java:157)
at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDs
tPolicy.<init>(JpsDstPolicy.java:186)
at oracle.security.jps.internal.tools.utility.destination.JpsInitializer
Dst.getDestinations(JpsInitializerDst.java:82)
at oracle.security.jps.internal.tools.utility.JpsUtility.<init>(JpsUtili
ty.java:63)
at oracle.security.jps.internal.tools.utility.JpsUtilMigrationPolicyImpl
.migrateAllPolicyData(JpsUtilMigrationPolicyImpl.java:234)
at oracle.security.jps.tools.utility.JpsUtilMigrationTool.executeCommand
(JpsUtilMigrationTool.java:167)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsRuntimeException
: Cannot read the default policy store.
thanks and regards
KishoreM

Migrating ADF Security from file-based provider to LDAP provider

We have deployed a small application using ADF Security with file-based provider in OAS and it works fine.
Now we want to migrate to ADF Security using LDAP provider.
In order to make this possible we followed the next steps:
- Migrate all the roles and policies from the file to OID with JAZNMigrationtool.
- In OAS we've changed the Application Security Provider to 'Oracle Identity Management'.
- Reset the OC4J instance.
But there was no success, the application continues working with the file-based provider.
What more is necessary to configurate?

Hi,
if you use EM make sure you change the setting for the application, not the general OC4J setting.
You can also deploy the provider settings with the orion-application.xml file added to your project
Frank

How to configure security realm for Active Directory ?

Hi,
Can any body suggest how to configure security realm in weblogic 8.1
I have simple login page where in user can enter his credentials, and i have MS-Active Directory where we maintain all users.
users who loged into web application has to be authenticated from Active Directory.
please suggest what are the steps that we need to follow
thanks in advance

Hi Sankar,
You can login to the weblogic server admin console and create a new realm.
Once you have created the realm you can add the authentication provider.You add the Active Authentication Provider.But you must have the the configuration inforamation of MS AD.You can read my blog http://dev2dev.bea.com/blog/bishnu_kumar/
where the integration is with iPlanet LDAP.Steps will be similar.
You must have a login portlet in your portal application and that should have been in accordance with j2ee security standards.For example you may use basic authentication or userlogin control or p13n API
Regards
Bishnu

DBMS_LDAP adding user to security group on Active Directory

Hi forum members,
I am accessing and manipulating Active Directory using the DBMS_LDAP package and its API's.
My initial code is to add a new entry in our MUsers group.After establishing the session and binding it , I supply the required credentials and the user , ex: 366944 is created successfully in the MUsers group which is a global users group.
My package then calls another function to now add the same user to the MGroups group and under that the Researcher security group.
When I do a search on the "Researcher" group this is the result : (I have deleted a few irrelevant entries)
ATTIBUTE_NAME: objectClass = top
ATTIBUTE_NAME: objectClass = group
ATTIBUTE_NAME: cn = Researcher
ATTIBUTE_NAME: member = CN=3,OU=MUsers,DC=xxx,DC=yyy
ATTIBUTE_NAME: member = CN=2,OU=MUsers,DC=xxx,DC=yyy
ATTIBUTE_NAME: member = CN=1,OU=MUsers,DC=xxx,DC=yyy
ATTIBUTE_NAME: distinguishedName =
CN=Researcher,OU=MGroups,DC=xxx,DC=yyy
ATTIBUTE_NAME: instanceType = 4
ATTIBUTE_NAME: whenCreated = 20100315150614.0Z
ATTIBUTE_NAME: whenChanged = 20100322172413.0Z
ATTIBUTE_NAME: uSNCreated = 97190
ATTIBUTE_NAME: uSNChanged = 102960
ATTIBUTE_NAME: name = Researcher
ATTIBUTE_NAME: objectGUID = ?P??|F?
?Q?'
ATTIBUTE_NAME: objectSid =
ATTIBUTE_NAME: sAMAccountName = $1B1000-EVVA2O0MRRBE
ATTIBUTE_NAME: sAMAccountType = 268435456
ATTIBUTE_NAME: groupType = -2147483646
ATTIBUTE_NAME: objectCategory =
CN=Group,CN=Schema,CN=Configuration,DC=xxx,DC=yyy
My add_in_group function is : (I am hardcoding certain values for simplicity)
FUNCTION add_in_group
(ldap_session dbms_ldap.SESSION
RETURN PLS_INTEGER
IS
lv_vals dbms_ldap.string_collection;
lv_array dbms_ldap.mod_array;
ln_retval PLS_INTEGER;
l_group VARCHAR2(256);
BEGIN
-- Initialize the varray for the modify command
lv_array := dbms_ldap.create_mod_array(10);
IF lv_array = NULL THEN
dbms_output.put_line('Error add_in_group: lv_array not initialized.');
NULL;
END IF;
dbms_output.put_line ('lv_array successfully initialized');
-- Populate the varray
lv_vals(1) := 'CN=366944,OU=MUsers,DC=xxx,DC=yyy';
dbms_ldap.populate_mod_array(lv_array,DBMS_LDAP.MOD_ADD,'member',lv_vals);
--Populate the object class variables
lv_vals(1) := 'group';
BEGIN
DBMS_LDAP.populate_mod_array(lv_array,DBMS_LDAP.MOD_ADD,'objectclass',lv_vals);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Populating object classes failed');
END;
--BEGIN
-- Group Modification
l_group := 'cn=Researcher,OU=Mgroups,DC=xxx,DC=yyy';
BEGIN
ln_retval := dbms_ldap.modify_s(ldap_session, l_group, lv_array);
--EXCEPTION
--WHEN OTHERS THEN
--dbms_output.put_line ('Error in modify_s ');
END;
-- Free the varray
dbms_ldap.free_mod_array(lv_array);
RETURN ln_retval;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('add_in_group : '|| SQLCODE||' '||SQLERRM);
RETURN -1 ;
END add_in_group;
My error is :
ORA-31202: DBMS_LDAP: LDAP client/server error: Already exists. 00000562:
UpdErr: DSID-031A0F4F, problem 6005 (ENTRY_EXISTS), data 0
The error descriptions reads like this :
Indicates that the add operation attempted to add an entry that already exists, or that the modify operation attempted to rename an entry to the name of an entry that already exists.
In this case , I am using the modify_s operation.I am supplying the credentials of the researcher group and trying to set the 'member' attribute as the user already existing in a diff group(MUsers).
The researcher group already has 3 uers , namely ,1,2 and 3 as members . These users are also part of MUsers group.
Hence I am not trying to rename any entry to the name of an entry that already exists.
Any help on this would be appreciated.

Hi,
I tried the same code that you have mentioned and did some changes as follows and now able to add members to a group.
remove the section that contains the following commands, then it will work
h5. lv_vals(1) := 'group';
h5. DBMS_LDAP.populate_mod_array(lv_array,DBMS_LDAP.MOD_ADD,'objectclass',lv_vals);
Thanks & Best Regards,
Indika

JDev11g : How to add java servlet under ADF security policies

I'm trying to set a same login on http servlet ( i create it trough wizard in jDev ) as it is for other .jspx pages.
I configured the jazn-data.xml and login ( user roles, realms ) is working fine.
But i can't configure http servlet to be under this authorization.
This problem occured when I was migrating from jDev 11g TP4 to production also from OC4J to WebLogic,
but if I create a new http servlet I am also unable to put it under JAZN authorization.
Thank you in advance for your help, Rok Kogovšek

I reproduced problem on new test application, it was working fine until I set up ADF Security by wizard.
I choose ADF Authentication and Authorization then Http Basic Authentication ( on real project is form based but probablly this doesn't matters )
then for Identy store I chose Application XML, no automatic grants and without redirect.
I also set inside web.xml this ( to put servlet under same login as other pages ).
*<security-constraint>*
*<web-resource-collection>*
*<web-resource-name>testServlet</web-resource-name>*
*<url-pattern>/test</url-pattern>*
*</web-resource-collection>*
*<auth-constraint>*
*<role-name>valid-users</role-name>*
*</auth-constraint>*
*</security-constraint>*
When I finish this i got same error as on first project.
Here is whole error:
oracle.jbo.common.ampool.ApplicationPoolException: JBO-30003: The application pool (oracle.fod.mobile.testModuleLocal) failed to checkout an application module due to the following exception:
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2262)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3086)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:424)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:419)
at oracle.jbo.client.Configuration.getApplicationModule(Configuration.java:1395)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1363)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1335)
at oracle.fod.mobile.testServlet.doGet(testServlet.java:22)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.adf.share.security.ADFSecurityAuthenticationException: JAAS login error.
Invalid null input: name
at oracle.adf.share.security.authentication.JAASAuthenticationService.doLogin(JAASAuthenticationService.java:120)
at oracle.adf.share.security.authentication.JAASAuthenticationService.login(JAASAuthenticationService.java:89)
at oracle.adf.share.security.authentication.JAASAuthenticationService.login(JAASAuthenticationService.java:71)
at oracle.jbo.common.UserAznUtil.authenticate(UserAznUtil.java:62)
at oracle.jbo.common.UserAznUtil.authenticateUser(UserAznUtil.java:29)
at oracle.jbo.server.ApplicationModuleImpl.prepareSession(ApplicationModuleImpl.java:6387)
at oracle.jbo.server.ApplicationModuleImpl.prepareSession(ApplicationModuleImpl.java:6356)
at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:171)
at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:8377)
at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(ApplicationPoolImpl.java:4364)
at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2421)
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2207)
... 25 more
Caused by: javax.security.auth.login.LoginException: Invalid null input: name
at javax.security.auth.login.LoginContext.init(LoginContext.java:229)
at javax.security.auth.login.LoginContext.(LoginContext.java:367)
at javax.security.auth.login.LoginContext.(LoginContext.java:444)
at oracle.adf.share.security.authentication.JAASAuthenticationService.doLogin(JAASAuthenticationService.java:102)
... 36 more
*And here is the sample application on which i reproduced this error [http://www.k-invent.si/doc/testServlet.zip|https://marvin/exchweb/bin/redir.asp?URL=http://www.k-invent.si/doc/testServlet.zip]*
Thank you for your help, Rok Kogov&scaron;ek

Unable to migrate ADF security policy updates to Weblogic production server

Hi all,
I am using JDeveloper 11.1.1.2.0. I can successfully deploy & run the application on my Integrated & Standalone WLS 10.3.2.
If I make changes to the security policy, I can see the change reflecting in the next run, after being deployed on the Integrated & Standalone server.
However, making changes to the security policy & deploying it on the production UNIX WLS server (10.3.2) does not reflect the changes. In fact I do not see the changes on System-jazn-data.xml on the server.
I will appreciate any help on this issue.
Thank you,

Hi again
for a work around we tried deploying the .ear with a different name. Every thing is now working.
The problem is not completely resolved as this should not be an idle way to deploy.
The System-jazn-data.xml on the Unix server still shows the old deployed file name along with the new (with correct policies).
Thanks,

Foreign Security Principles in Active Directory global group

Our AD set-up involves users on two domains. The domains fully trust each other. We have created a group on the one domain that contains users from both domains. The users inherit proper rights when conducting file operations on servers (e.g. reading, writing, modifying, deleting files) in either domain.
We successfully add the group to the Mapped AD Members Groups section in the authentication manager. However, the foreign security principals are not created as users in BOE XI 3.1. We are using .NET and NTLM authenticaiton.
We can create groups in each of the domains, but it would be easier for AD administrators to only have to manage users group membership in one or the other of the domains.
Is this behavior a limitation of the AD API? Or do we need to do some additional set up in AD to recognize users from the primary as well as the trusted domain?

Hi Tim,
I tried to add the FQDN registry key. However, this has no effect. I set the key's value to 1 and when that didn't work to True. Is this the correct setup?
Just to be clear, below is what is happening.
Group1 in domain1 contains users domain1\x and domain1\y. I add domain1\Group1 to the AD Mapped Member Groups in the CMC. These users can both log-in to the Infoview portal.
Group2 in domain2 contains users domain2\w and domain2\z. I successfully add domain2\Group2 to the AD Member Groups in the CMC. These users can both log-in to the portal.
Group3 in domain1 contains users domain1\s and domain2\t. I successfully add domain1\Group3 to the AD Member Groups in the CMC. Only domain1\s can log-in.
Trying to manually create a user for domain2\t produces the error, "Creation of the user domain2\t cannot complete because the user is not a member in any of the mapped groups." This, of course, is not true because he is a foreign security principal in domain1\Group3. Yet, the AD plug-in for some reason does not recognize his account.
Worst case scenario, I will have to ask the domain admins to maintain groups separately based on the user's domain. This is OK if we keep the number of groups small. But, if our security scheme grows to include many groups, it will become more difficult to manage.
Thanks for your help,
Gabriel
Edited by: Gabriel Rua on Apr 22, 2009 1:04 PM

How to copy information from a user account's Security tab of Active Directory User and Computer Security tab to another user account?

Hi, I'm using vs2012
Grammatically, by C# code, I need to copy a user account's Security (from ADUC Security tab) and apply it to a new user account I created by code. My application creates new AD accounts when needed. I need to duplicate/copy attribute from another
user account that we use as a base template. I can copy most other attributes through property["xxxxx"] but how do I copy all that permission access information under the ADUC Security tab?
How can I do that? Thank you.
Thank you

I would recommend asking them in C# forums: https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=csharpgeneral&filter=alltypes&sort=lastpostdesc
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

ADF with Active Directory

I want to use ADF security using my active directory
I successfully do the following stps
1- configured new Security Realms to get users from my AD
2- build ADF application with users added into jazn-data.xml
I don't know how to replace the user in jazn-data.xml with users from my new realm

Nope. In Java EE the application does not care about specific users in the standard application setup. It just cares about roles (aka groups) for example by using the method isUserInRole(). You have to add them with your Active Directory tools.
Having said that, some servers provide additional functionality by setting stuff up in server specific deployment descriptors. In OC4J you can do this for file based authentication by providing a jazn-data.xml if you use an EAR file.
HTH,
--olaf

SSO (single sign on) on NetWeaver 7.0 Enterprise Portal based on spnego with Microsoft Active Directory

Hi,
we are using SAP Netweaver Enterprise Portal 7.0 (SP25) based on Windows 2008 R2/Oracle 11g.
When we setup the Portal, we used the UME of the ECC - ABAP.
The portal is used internally only.
Now we want to provide SSO.
User authenticate against Windows Active Directory (Windows 2003).
We thought SSO via spnego would be the best solution.
Any better alternates, we should use?
We are following the SAP documentation:
SAP-Bibliothek - Benutzerauthentifizierung und Single Sign-On
We still want to create users in ABAP and assign them the portal roles. LDAP access should only have read access, to verify the security token from Active Directory.
When we setup the portal from scratch using ABAP as its UME, in the system configuration, LDAP can't be selected/add as data source.
In case we understand the documentation correctly, we would now need to add LDAP via the configtool for read access.
What is not clear to us, when we active now LDAP via config tool, if we would now lose the ABAP connection.
Is there a tutorial for SSO Netweaver 7.0 EP, like for EP 7.3, available?
In 7.3 SSO is pretty simple to get it running, thanks to the many tutorials here and on the internet.
Thanks for your help.
Best regards
Carlos Behlau

Hi,
I was able to generate the key via ktab program.
But when I am enable SSO, nothing is happening when I try to log-on via SSO to the portal.
I installed WebDiag tool on the portal server and ran trace.
The users are located in domain: company.com of activate directory.
The Java AS are located in domain: sap.company.com of activate directory.
The sap.company.com domain acts as child of company.com.
When I check the WebDiag trace, I see for the SPNegoLoginModule - the entry "... no key (etype: 23) for realm sap.company.com available ..."
I would except company.com as realm key, as the keytabs have been generated on the domain controller of company.com.
Is it possible to get SSO with child domain running?
Based on the statement of the network folks, child and father domain having a trust.
Thanks for your help.
Best regards
Carlos

Web Center app with ADF Security - login problem

I have a custome Oracle Web Center app.
I have a page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the root page http://127.0.0.1:7101/MyApp-ViewController-context-root/
and i get
Error 403--Forbidden
I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the required entries are there.
This works fine if i use a Login link with
destination="#{'/adfAuthentication?login=true&end_url=/faces/postLogin.jspx'} "
which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.
P.S. Have been advised to try here when I originally asked this in the WebCenter forum. Web Center app ADF Security - login problem
Edited by: new_to_webcenter on 18-Jan-2011 05:25

Thanks for your response Frank.
The web.xml has
<security-constraint>
<web-resource-collection>
<web-resource-name>adfAuthentication</web-resource-name>
<url-pattern>/adfAuthentication</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>valid-users</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>FORM</auth-method>
<form-login-config>
<form-login-page>/login.html</form-login-page>
<form-error-page>/error.html</form-error-page>
</form-login-config>
</login-config>
When configuring ADF Security via JDev , I chose "Redirect upon successful authentication" to the Welcome Page
"/faces/postLogin.jspx"
this then adds into web.xml
<servlet>
<servlet-name>adfAuthentication</servlet-name>
<servlet-class>oracle.adf.share.security.authentication.AuthenticationServlet</servlet-class>
<init-param>
<param-name>success_url</param-name>
<param-value>/faces/postLogin.jspx</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
So the sequence which works is:
Login via the '/adfAuthentication?login=true&end_url=/faces/postLogin.jspx' and this redirects to login.html (OOTB form which posts to j_security_check) and then to the postLogin.jspx
I'm trying to do away with a Login link, and trying the simple login form embedded in my page alongwith other content.
So should the form be posting to j_security_check directly or to the adfAuthentication ?

Web Center app ADF Security - login problem

I'm making an Oracle Web Center app.
I have an app page.html with an embedded login form posting to j_security_check. I've configured the ADF security policies to redirect to a JSPX on successful login.
When I try the correct username/password, I get redirected not to the page I defined in ADF, but to the http://127.0.0.1:7101/MyApp-ViewController-context-root/
and i get
Error 403--Forbidden
I've checked the weblogic.xml as per http://andrejusb.blogspot.com/2009/12/solving-error-403-forbidden-in-adf.html, all the entries are there.
This works fine if i use a Login link with
destination="#{'/adfAuthentication?login=true&end_url=/faces/postLogin.jspx'} "
which redirects to the default login.html and then to the right page. I've copied the form from the default login.html into my master HTML page.
Hope my question is clear. Any suggestions why it is going to the wrong URL after login.
Is there anything specific I should see in the jazn-data.xml or web.xml regarding the post-login URL since i cant see that in either.

Ah so when you try to access a JSPX page it works but when you try to access an HTML page it does not work?
I can't see what the problem could be if it works for a JSPX but not for an HTML. Perhaps something with the filters in the web.xml
Maybe you should ask this at the ADF forum: JDeveloper and ADF
The guys there have way more understanding about this stuff than here.

Unable to expand Roles n policies after enabling Active directory security

I am running weblogic 10.3 on Linux and integrated console security with Microsoft AD.
Below error occurs when I tried to expand roles and policies.
Please help.
Message: weblogic.management.utils.NotFoundException: [Security:090311]Failed to set resource expression
Stack Trace: com.bea.console.exceptions.ManagementException: weblogic.management.utils.NotFoundException: [Security:090311]Failed to set resource expression at com.bea.console.actions.security.roles.RoleTableAction.createRoleNode(RoleTableAction.java:678) at com.bea.console.actions.security.roles.RoleTableAction.expandGlobalRolesNode(RoleTableAction.java:208) at com.bea.console.actions.security.roles.RoleTableAction.expandNode(RoleTableAction.java:193) at com.bea.console.actions.security.roles.RoleTableAction.execute(RoleTableAction.java:102) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044) at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116) at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:255) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853) at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631) at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158) at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414) at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133) at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199) at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686) at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266) at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107) at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292) at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739) at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395) at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361) at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208) at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162) at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388) at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258) at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211) at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196) at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:54) at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(Unknown Source) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: weblogic.management.utils.NotFoundException: [Security:090311]Failed to set resource expression at com.bea.security.providers.xacml.entitlement.RoleManager.getRole(RoleManager.java:134) at weblogic.security.providers.xacml.authorization.XACMLRoleMapperImpl.getRoleExpression(XACMLRoleMapperImpl.java:499) at weblogic.security.providers.xacml.authorization.XACMLRoleMapperMBeanImpl.getRoleExpression(XACMLRoleMapperMBeanImpl.java:389) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean.java:437) at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836) at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:447) at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:445) at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10$1.run(AuthenticatedSubjectInterceptor.java:582) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor$10.run(AuthenticatedSubjectInterceptor.java:580) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterceptor.invoke(AuthenticatedSubjectInterceptor.java:573) at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:307) at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1426) at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72) at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1264) at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1366) at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788) at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174) at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222) at javax.management.remote.rmi.RMIConnectionImpl_1030_WLStub.invoke(Unknown Source) at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:978) at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544) at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380) at $Proxy70.getRoleExpression(Unknown Source) at com.bea.console.actions.security.roles.RoleTableAction.createRoleNode(RoleTableAction.java:671) ... 81 more

<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/wls http://www.bea.com/ns/weblogic/90/security/wls.xsd http://www.bea.com/ns/weblogic/920/domain http://www.bea.com/ns/weblogic/920/domain.xsd http://www.bea.com/ns/weblogic/90/security/xacml http://www.bea.com/ns/weblogic/90/security/xacml.xsd http://www.bea.com/ns/weblogic/90/security http://www.bea.com/ns/weblogic/90/security.xsd">
<name>ABC</name>
<domain-version>10.0.1.0</domain-version>
<security-configuration>
<name>ABC</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType">
<sec:control-flag>OPTIONAL</sec:control-flag>
<wls:propagate-cause-for-login-exception>false</wls:propagate-cause-for-login-exception>
</sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:active-directory-authenticatorType">
<sec:name>MYSECURITY</sec:name>
<sec:control-flag>OPTIONAL</sec:control-flag>
<wls:propagate-cause-for-login-exception>false</wls:propagate-cause-for-login-exception>
<wls:host>ad.win.XYZ.com</wls:host>
<wls:port>3210</wls:port>
<wls:user-name-attribute>SamAccountName</wls:user-name-attribute>
<wls:principal>CN=ABC (APPLICATION),OU=Service Accounts,OU=Infrastructure Solutions,OU=USPC,DC=americas,DC=win,DC=xyz,DC=com</wls:principal>
<wls:user-base-dn>DC=americas,DC=win,DC=xyz,DC=com</wls:user-base-dn>
<wls:credential-encrypted>{3DES}3gr1b24C1+ZescfrcJGfTA==</wls:credential-encrypted>
<wls:user-from-name-filter>(&(SamAccountName=%u)(objectclass=user))</wls:user-from-name-filter>
<wls:cache-size>3200</wls:cache-size>
<wls:group-base-dn>DC=americas,DC=win,DC=xyz,DC=com</wls:group-base-dn>
<wls:bind-anonymously-on-referrals>true</wls:bind-anonymously-on-referrals>
<wls:all-groups-filter>(objectclass=group)</wls:all-groups-filter>
<wls:group-membership-searching>limited</wls:group-membership-searching>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://www.bea.com/ns/weblogic/90/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{3DES}Da9bWdtd5q7ah0l1OlmgTprs5EsrhL0siPsTNKzMDOasnQwrpgSVnAKFIdM3O/CjsXOzrq2fBACcbtup4aQCbNpjynWFUDB1</credential-encrypted>
<node-manager-username>system</node-manager-username>
<node-manager-password-encrypted>{3DES}IwjibsnAdGEU/pYi+0n1bg==</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>byTime</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25000</listen-port>
<server-debug>
<debug-scope>
<name>default</name>
<enabled>true</enabled>
</debug-scope>
<debug-scope>
<name>weblogic</name>
<enabled>true</enabled>
</debug-scope>
</server-debug>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server1</name>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25010</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<server>
<name>ABC_server2</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25020</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server4</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25040</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server5</name>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine xsi:nil="true"></machine>
<listen-port>25050</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
</server>
<server>
<name>ABC_server6</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25060</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server7</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25070</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server8</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25080</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server10</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25100</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server9</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25090</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>ABC_server3</name>
<log>
<file-name>logs/AdminServer.log</file-name>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-time-span>24</file-time-span>
<rotation-time>00:00</rotation-time>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Info</logger-severity>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Trace</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<listen-port>25030</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<server-debug>
<debug-scope>
<name>default</name>
<enabled>true</enabled>
</debug-scope>
<debug-scope>
<name>weblogic</name>
<enabled>true</enabled>
</debug-scope>
</server-debug>
<listen-address></listen-address>
</server>
<embedded-ldap>
<name>ABC</name>
<credential-encrypted>{3DES}RhnPr+8XsDxhU8rgpPiikqpyeP74wxX/T2mnALX9oFI=</credential-encrypted>
</embedded-ldap>
<configuration-version>10.0.1.0</configuration-version>
<configuration-audit-type>logaudit</configuration-audit-type>
<app-deployment>
<name>ABC25090</name>
<target>ABC_server9</target>
<module-type>ear</module-type>
<source-path>/home/arajpoot/working/default-app/dist/ABC.9.5.0.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC25080</name>
<target>ABC_server8</target>
<module-type>ear</module-type>
<source-path>/home/aherleka/working/default-app/dist/ABC.10.1.0.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC25030</name>
<target>ABC_server3</target>
<module-type>ear</module-type>
<source-path>/home/rprajapa/working/default-app/dist/ABC.10.1.0.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC25060</name>
<target></target>
<module-type>ear</module-type>
<source-path>/home/xyin/working/default-app/dist/ABC.10.1.0.ear</source-path>
<sub-deployment>
<name>/</name>
<target></target>
</sub-deployment>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>ABC25010</name>
<target>ABC_server1</target>
<module-type>ear</module-type>
<source-path>/home/payadav/working/default-app/dist/ABC.10.1.0.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC25050</name>
<target>ABC_server5</target>
<module-type>ear</module-type>
<source-path>/home/nchanda1/working/default-app/dist/ABC.10.0.3.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC8070</name>
<target>ABC_server7</target>
<module-type>ear</module-type>
<source-path>/home/irakshit/working/default-app/dist/ABC.10.1.0.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC8020</name>
<target>ABC_server2</target>
<module-type>ear</module-type>
<source-path>/home/wchou/working/default-app/ABC.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC8100</name>
<target>ABC_server10</target>
<module-type>ear</module-type>
<source-path>/home/amulik/working/default-app/dist/ABC.9.5.0.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>ABC8040</name>
<target>ABC_server4</target>
<module-type>ear</module-type>
<source-path>/home/nchanda1/working/default-app/dist/ABC.10.0.3.ear</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>ABCCDWDataSource</name>
<target>ABC_server9,ABC_server8,ABC_server3,ABC_server1,ABC_server5,ABC_server7,ABC_server2,ABC_server10,ABC_server4,ABC_server6</target>
<descriptor-file-name>jdbc/ABCCDWDataSource-2021-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>ABCCDWDataSource_coper</name>
<target>ABC_server9,ABC_server8,ABC_server3,ABC_server1,ABC_server5,ABC_server7,ABC_server2,ABC_server10,ABC_server4,ABC_server6</target>
<descriptor-file-name>jdbc/ABCCDWDataSource_coper-9655-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>ABCOracleDS</name>
<target>ABC_server9,ABC_server8,ABC_server3,ABC_server1,ABC_server5,ABC_server7,ABC_server2,ABC_server10,ABC_server4,ABC_server6</target>
<descriptor-file-name>jdbc/ABCOracleDS-5997-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>ABCReportDataSource</name>
<target>ABC_server9,ABC_server8,ABC_server3,ABC_server1,ABC_server5,ABC_server7,ABC_server2,ABC_server10,ABC_server4,ABC_server6</target>
<descriptor-file-name>jdbc/ABCReportDataSource-6033-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>ABC_NEON_DATASOURCE</name>
<target>ABC_server9,ABC_server8,ABC_server3,ABC_server1,ABC_server5,ABC_server7,ABC_server2,ABC_server10,ABC_server4,ABC_server6</target>
<descriptor-file-name>jdbc/ABC_NEON_DATASOURCE-9653-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>ABCRDRDS</name>
<target>ABC_server9,ABC_server8,ABC_server3,ABC_server1,ABC_server5,ABC_server7,ABC_server2,ABC_server10,ABC_server4,ABC_server6</target>
<descriptor-file-name>jdbc/ABCRDRDS-5401-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>ABCtest</name>
<target>ABC_server6</target>
<descriptor-file-name>jdbc/ABCtest-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>ABCreport</name>
<target>ABC_server6</target>
<descriptor-file-name>jdbc/ABCreport-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
</domain>

Migrating ADF Security Policies to Active Directory

Similar Messages

Maybe you are looking for