Migrating Trading Partner from test to Production environment

Hi,
My Production environment has configuration for two trading partner.
I need to migrate one more trading partner from test environment to (the existing) production environment.
I see Agreement level export, TP level export, Config level export options in Oracle B2B.
Can you please suggests as to which is the fastest and most accurate way to migrate new trading partner configuration?
Regards,
Ravi Shah

There is nothing as preferred option. However you can keep few things in mind.
1. Agreement Export - Preferred option , if you would like to export only specific Trading Partner and Agreement details.
2. Repository Export - For full repository export.
3. Trading Partner Export - This option do not keep any TP in mind while taking the export, hence you may not information about Delivery channel and Agreement. This provides information about Trading partner profiles and Supported Document defition of the trading partner.
Let me know.

Similar Messages

What is the best practice to deploy the SharePoint site from test to production environment?

We are beginning to start a new SharePoint 2010 and 2013 development projects, soon developing new features, lists, workflows, customizations to the SharePoint site, customization to list forms and would like to put good practice (that will help in deployment)
in place before going ahead with development.
What is the best way to go about deploying my site from Development to Production?
I am using Visual Studio 2012 and also have Designer 2013...
I have already read that this can be done through powershell, also through visual studio and also via designer. But at this point I am confused as to which are best practices specifically for lists, configurations; workflows; site customizations; Visual studio
development features; customization to list forms etc. You can also provide me reference to links/ebook covering this topic.
Thanks in advance for any help.

Hi Nachiket,
You can follow below approach where the environments has been built in similar fashion
http://thesharepointfarm.com/sharepoint-test-environments/
if you have less data then you can use http://spdeploymentwizard.codeplex.com/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b0bdb2ec-4005-441a-a233-7194e4fef7f7/best-way-to-replicate-production-sitecolletion-to-test-environment?forum=sharepointadminprevious
For custom solutions like workflows etc you can always build the WSP packages and deploy across the environments using powershell scripts.
Hope this helps.
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
Hi, can you answer me specifically with regards to the foll:-
lists
configurations
workflows
site customizations like changes to css/masterpage
Visual studio webparts
customization to list forms
Thanks.

Getting error while migrating single mpr from pilot to production environment

Hi,
I am migrating single MPR form pilot to production and I am facing the following issue
Join-FIMConfig : Two objects with same AnchorAttributeValue were detected. A requirement for using this migration tool is that AnchorAttributeValue is unique with objectType
AnchorAttributeNames = DisplayName
AnchorAttributeValues = DisplayName
ObjectType = AttributeTypeDescription
ObjectID 1 = urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1
ObjectID 2 = urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f
Any help to resolve this issue. The DisplayName is built-in attribute.
Thanks
Pavani

Search these object ID in your production environnement it corresponds to something
ObjectID 1 = urn:uuid:acbcad3b-8394-4af3-a1d4-149cabae05d1
ObjectID 2 = urn:uuid:9f35c912-18bb-4b73-b128-281be0cae32f

In Oracle How to migrate .Rdf file from Development to Production Environ..

Hi,
Please explain me step by step how to migrate report(.Rdf) file from development instance to production instance ASAP.
Thanks & Regards,
Raj

Rai,
Please ask your questions in the EBS section, since they are not PeopleSoft related.
Regards,
Hakan

OWB propagation from development to production environment

Our department is in need to implement overall security around our production data warehouse.
One issue that seems to bother our management is having only one OWB Designer where developers would have to be responsible enough to use snapshots and export mappings to mdl files. Management would like to have development and production OWB Designer Repository where production designer would always be in sync with what is deployed in prd database. Also prd OWB Designer Repository would be like a source safe so we have to always get a mapping from prd designer move it dev designer and when done propagate changes back to prd designer and then deploy to prd database.
Would this be a good approach?
Any input on how to handle propagation from development to production environment, and if you are aware of "best practices" when it comes to OWB environment is appreciated.
Best Regards,
Vlasta

Hi,
Copy whole catalog and rpd from dev to prob.
If you want to copy specific report go to OracleBIData\web\catalog\samplesales\root\shared\sample+sales(group folder name)
You can copy reports under folders and dashboards in _portal in Sample sales group folder...both file and .atr file.But you may miss security applied on those dashboards.
http://www.rittmanmead.com/2008/04/28/migration-obiee-projects-between-dev-and-prod-environments/
Best practice is to copy whole catalog and rpd (or) Copy shared and system folders and their .atr files from OracleBIData\web\catalog\samplesales\root so that you will not miss security and you will not over ride users folders which may contain some data created by them.
Thanks,
Srikanth

Unable to update Partner Unit in Eccs with Trading Partner from FI

Hi,
I had removed the Breakdown category from the FS item Master (CX14) for a reco Acct by mistake .Now when i update the master table in CX14 with the same Break down Category(0110 - Partner Unit (break down Type-4) + Translation Currency (break down type -2)) the sytem than gives a pop up window showing the "Report for Transaction Check" where it asks for the Default Value of Partner Unit to be entered.Once i maintain the default value of partner unit all the document for the reco account gets updated with default Partner unit.However in FI module each of the documents posted for this account have diffrent Trading Partner due to which im unable to do the Interunit Elimination.
Kindly let me know how do i update Partner unit in all the documents in Consolidation with the trading Partner from FI module.
thanks
Karan

Once i maintain the default value of partner unit all the document for the reco account gets updated
this system behavior makes sense as you are trying to change configuration after loading transaction data. what happens if you go back to the underlying accounts and change TP back to what FI is showing? if u have to deal with a lot of documents u may want to set up a BDC session to do the mass update.

Migration from development to production environment for SAP Netweaver BI

All,
When I created a SAP Netweaver BI connection using BeX query in BW development environment, the system is defaulted to the BW development environment. Since the system textbox can't be modified to use a variable to point to production environment, can you share how you migrate your SWF file to production environment and ensure that it points to the BeX production query?
Thanks for sharing ....

After some more searching, I found this link: http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f005a4ca-d4fd-2c10-adb8-8ec24383cb97

Migrating Essbase Application from QA to Production

Hi Experts,
I need to migrate an Essbase application (PLNG) from QA to Production system. This migration include business rules, calc scripts, load rules, and report scripts. The metadata repository resides in an Oracle DB. I am following step:
Shutdown the Essbase application PLNG.
Move the complete files under $ARBORPATH/app/PLNG from QA to Production
Move all the Essbase data files for Essbase PLNG databases pag and ind files from QA to Production
Export the PLNG user from QA and import it to the Production Oracle DB (metadata)
I need comments whether I am following the right procedure or not. Also the PLNG application contains one database PLNG1 which I want to keep as is , so in that case, how do I need to import the metadata from QA to Prod.
Thanks
-Samar-

Hello Nome02:
I would test first what dhowehughes has said. You can find this wizard on File->Wizards->Migration menu in Essbase Administration Services Console. This usually works for all metadata with two exceptions:
1) Security issues. If you are using Shared Services, you will not be able to migrate users, provisioning,... with this method. You must use Shared Services instead. If your Essbase installation is stand-alone, then you can use this wizard to migrate security.
2) Data. You have to export data to a file/s. Transfer this/these file/s to Prod environment and import them.
Regards
Javier

How to migrate xml report from test to prod?

Hi,
We are using BIP 10.1.3.2 standalone. I've one simple question for migrating report from test enviornment to production.
Is there any standard method for migration?
Like in Discoverer we can simply export report and import it in prod environment.
Thanks...

Thanks for your reply. That's one describes for EBS version of BIP. I'm looking for standalone version of BIP enterprise.

Steps for Go Live for Webtools moving from Test to Production

Further to the useful checklist in the wiki recently supplied by Bryce can I ask for some minor gaps to be filled ( perhaps by inserting a few additional steps in that document)
I have yet to hit the issues created by a go live implementation but this is only a matter of time...
I am trying to work out what needs to occur between having :
a) a test B1 database successfully synching to a test WT site and db set up
and
b) the Production B1 database initially synched to the the live WT live WT db ready to accept the first live transactions.
1) Copy WT site from test to live location
2) Change Server config, settings and Tables tabs in Synch Manager click on 'Install Plugin' to add custom fields to Production B1 database
3) ......
I am stuck as to what needs to be done to "reset" the WT back end db and how one goes about this.
Coupled with this and probably part of the answer is the 'Initialise Synch' button. It would be useful to understand exactly what this does in terms of data - presumably it is only transactional data - but which tables are affected?
Also if there's anything else that I might have overlooked in terms of potential pitfalls I'd be grateful for advice - the recent posts regarding product trees and images come to mind.
Thanks

First thing is to plan for some downtime in your B1 databases. Nothing more frustrating than having new data come into b1 when you're trying to set this up. So perhaps do this at night or on a weekend when no one is using B1.
Install Plugin operation adds UDF's, edits the stored proc in b1 db, and creates the queue table, PRX_Transaction_Queue
Initialize synch runs upgrade scripts(if applicable), deletes all data that has synched from B1 previously(or would synch from Wt to B1, like a test order created in Wt) and inserts all relevant data into the queue table in B1 db. Also the synchid's are reset. It's pretty much the same list as is displayed on the Settings page of the Synch Manager. Please someone correct me if I'm missing something here!
Pre-requisites:
- Name the Wt db relevant to its position in the environment. B1Webtools is not the greatest name, it's meant to be a jumping off point. Rename your Wt db in the way that you would for B1. ie WebtoolsLive, WebtoolsTest. Makes things easier
Two options:
1) Presuming you have a test Wt db and a test b1 db or even a test Wt db and a production(live) B1 db, you could duplicate the test Wt db and change the synch manager config to point to the B1 live db. Install the "plugin" on the new B1 live db and enter your table mappings. Initialize synch will delete all the data that has synched from B1 test db to Wt db(now live db) and reset the synch id's to zero. These will be populated during the synch. Then Run Synch.
Caveat: This option is fine if your synch takes a "short" period of time. Short being an hour. If you have say 20,000 business partners with 3 years of order history and 300 lines per order... expect several hours.
2) Create a test synch profile and a live synch profile in tandem and update only the live synch profile with data. Also, have two web tools websites but work primarily in the live one. The synch manager will auto synch both profiles every time the service runs(set by you)
When it's go time, copy the live db's over the test db's so you have a test environment exactly matching your live environment. Now, obviously as soon as new data goes into the live db it's out of synch, but this way you have a test system you can break or use to test upgrades, etc.
As you might guess, there are a number of ways to go with this. It really does depend on a) how comfortable you are with moving data around in SQL and b) what your setup entails.
I think the best thing you can do is make it as simple as possible. Don't overthink things and make sure you have a backup of everything before you start.
Good luck!

Automatic Deploying of Portal Configuration from Staging to Production Environment

Hello,
I'm anlyzing the opportunituy to write an automatic procedure that synchronize
our WebLogic Portal production environment with the staging one. These two environments
are physically separated.
I have found the BEA Propagation Tool. However it seems that is not possible to
define a procedure that is really totally automatic.
Firts of all, it is necessary to hava an manual operator that selects the objects
that have to be propagated and after starts the propagation process.
Besides it is necessary to have database connections beetween the progation tool
and both the environments.
What I'm looking for is a solution that
1. analyze the staging environment
2. export some files that contain both code, configuration and data (code, LDAP
and DB data)
3. import these files into the second enviroment
has someone deal with this problem?
Thans in advance
Ciao

Manish,
to answer your questions -
1. You can find the exact date and time for these refreshes/maintenance schedule on your production pod. Just go to 'Training & Support' in your production. There will be a calendar in which you can see the maintenance schedule. The details are quite accurate. to be sure of the time I would suggest you get in touch with the Service/Support rep at Oracle.
2 & 3) Oracle CRM On Demand provides a Migration Tool that can be used to migrate configuration changes from on POD to another. This can be between Staging --> Production and vice versa. Although, I would recommend that you go through the migration tool bookshelf and understand in detail the use of this tool. There are limited configurations that can be migrated. So it would be wise to create a plan based on what changes you are looking to migrate.
Note: Reports are copied on the Staging after the refresh only from Prod to Staging. This does not happen from Staging to Production. Reports will have to be created in Production and will be copied on Staging on a Quarterly basis (Check your refresh schedule)
4) You can use the migration tool to migrate configuration changes from a live environment into another instance.
The migration tool can be downloaded from:
Admin --> Import and Export Tools -->Oracle Migration Tool On Demand
You can download the Migration Tool Bookshelf here:
http://docs.oracle.com/cd/E22393_01/books/OnDemMigrTool.pdf
Thanks,
Royston

Deployment from DEV to Production environment

Hi,
What are the best possible ways to deploy the visual web parts and Pages from development environment to Production environment.
As I am very much new to Sharepoint, I would like to have the safest methods to do the deployment into production. Please also suggest the prerequisites.
I have a solution with number of visual web parts in the development environment which is working fine. Need to move the Visual web parts to production (Existing site). So please suggest the safest methods.
Thanks and Regards,
Satish
Sathiish Reddy

Hi Satish,
From your description, my understanding is that you want to deploy your solution from development environment to production environment with a safest method.
These links below about moving content from environment to another environment could be helpful to you:
SharePoint 2013 Dev/Test/Production environment - Moving content
http://sharepoint.stackexchange.com/questions/78483/sharepoint-2013-dev-test-production-environment-moving-content
How to deploy webpart on production (not debugging) server?
http://sharepoint.stackexchange.com/questions/17779/how-to-deploy-webpart-on-production-not-debugging-server
you could also have a look at this link below about SharePoint Content Deployment Wizard:
How do you deploy your SharePoint solutions?
http://stackoverflow.com/questions/9543/how-do-you-deploy-your-sharepoint-solutions
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ERROR WHILE MIGRATING SSIS PACKAGE FROM DEVELOPMENT TO PRODUCTION IN EXECUTION

HI,
I have a problem while executing the package after migrating from DEVELOPMENT to PRODUCTION.
We have two SQL database connections DEVMIDDLEWARE and PRODMIDDLEWARE for dev and prod respectively. When we have created package in development we have used DEVMIDDLEWARE and we have credentials in CONFIG file of that package and executed sucessfully. When
we migrated this same package to PRODUCTION when have given credentials of PRODMIDDLEWARE in CONFIG FILE of this package we are getting error as below
"Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic
error. Verify that the correct key is available. End Error Error: 2014-10-28 07:41:44.24     Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node
"DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC0202009     Source: Package Connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware"     Description: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.".
End Error Error: 2014-10-28 07:41:44.85     Code: 0xC020801C     Source: Package Log provider "SSIS log provider for SQL Server"     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "DEVBIZTALKDB01.RHUL_Staging.devmiddleware" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method
call failed. COM error object information is available. Source: "Package" error code: 0xC0202009 Description: "SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE
DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'devmiddleware'.". ". End Error Error: 2014-10-28 07:41:44.98
Code: 0xC0202009     Source: Package Connection manager "AGRDB01.abwr66"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record
is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user 'CC\epsdbuser'.". End Error Error: 2014-10-28 07:41:44.98     Code:
0xC020801C     Source: Data Flow Task OLE DB Source [1]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "AGRDB01.abwr66"
failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC0047017
Source: Data Flow Task SSIS.Pipeline     Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. End Error Error: 2014-10-28 07:41:44.99     Code: 0xC004700C
Source: Data Flow Task SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-10-28 07:41:45.00     Code: 0xC0024107     Source: Data Flow Task
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 07:41:44 Finished: 07:41:45 Elapsed: 0.859 seconds. The package execution failed.
The step failed."
Can anyone help for this error.
Many thanx in Advance

Hi Babloo,
According to the error message, the package may have failed are as follows:
The user account that is used to run the package under SQL Server Agent in PRODUCTION server differs from the original package author.
The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
The package may not run in the following scenarios:
The current user cannot decrypt secrets from the package. This scenario can occur if the current account or the execution account differs from the original package author, and the package's ProtectionLevel property setting does not let the current user
decrypt secrets in the package. In this scenario, we can change the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword, then modify the SQL Server Agent job step command line to include this password.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses. In this scenario, we can create a SQL Server Agent proxy account. This proxy account must use a credential
that lets SQL Server Agent run the job as the account that created the package or as an account that has the required permissions.
References:
SSIS package does not run when called from a SQL Server Agent job step
Run an SSIS Package Under a Different Account
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Migrate BQY files from Test to Prod.

I have published some reports in workspace manually earlier. But, now i have so many reports which i need to migrate from Test to Prod.
Please suggest the steps, and how to handle the OCE files and Security.
Version is 11.1.2.1
windows 2008 server
Thanks in advance.

You can use LCM utility to migrate to different env's provided they are on same version.
http://docs.oracle.com/cd/E17236_01/epm.1112/epm_lifecycle_management.pdf
Thx

Transfer data from Test to Production Server

Dear All
I want to know how to transfer data from test server to production server.
Lets say we have done all the setup steps of GL, and we have also feeded chart of accounts, journal entries, recurring etc. at our test server. Now we want to shift our data from Test Server to Production Server.
What can be the procedure?
I shall be really thankful.
Best Regards
Muhammad Habib
http://mhabib.wordpress.com

Dear hsawwan
Thanks for your reply. Can you send me this document via email. My email id is: [email protected]
Secondly can you please tell me how to just transfer my Chart of Account.
I shall be really thankful to you.
Best Regards
Muhammad Habib

Migrating Trading Partner from test to Production environment

Similar Messages

Maybe you are looking for