Migration of Tax calculation procedure---TAXINJ to TAXINN

Hi Gurus,
Currently we are doing technical upgrade from 4.7 to Ecc 6.0.
Considering benefits and advantages of TAXINN procedure,we want to migrate from TAXINJ to TAXINN so that it will also support CRM.
Kindly help me about the roadmap and guide for the migration.
Regards,
Krishna

Mr. Krishna,
changing from TAXINJ to TAXINN is not simple, as such SAP also has no guide for it.
We tried doing it in one of our upgrades from 4.6B to ECC 6.0 (for a Chemical MFG company in 2008) but SAP said they have no guide lines / notes available for this.
TAXINJ will also support CRM, and SAP will support TAXINJ procedure as long as the client is with the current SAP version.
This is what they told us. And it is logically correct, because when we change tax procedure, we should take care of 4 big things.
1. Open PO update after tax procedure change
2. Open SO update after tax procedure change
3. Change account determination
4. Create new condition records
And more over, we will have to create all access sequences againa and maintian the master data.
It is a risky item... although not impossible. As far as I know and I came to know from SAP, no client who has upgraded has migrated the tax procedure.
For more details contact SAP Helpdesk and put your query.
Thanks & regards
Hameed Parvez

Similar Messages

Calculation procedure TAXINJ and tax key E1 not in table T007A

Hi guys,
While creatig a sales order I am getting the following error:
" Calculation procedure TAXINJ and tax key E1 not in table T007A"
Kindly suggest corrective measures.
Bst regards,
Ashok

Dear ashok
please check for the Tax code assignment which is determined in UTXJ condition.
for the sales order.
and check that tax code is defined as output TAX in FTXP.
for country IN and Tax procedure TAXINJ.
Thanks & regards

Condition types in tax calculation procedures

hi sap Gurus,
Tax calculation procedures cointains the order of steps, tax types{condition types}, and account keys.I am not able to understand what condition types are and its importance in the tax calculation procedures.
Please help me SAP Gurus
C.S.N Ajay
SAP Certified Consultant

hi
Check out the standard pricing procedure RVAA01 - MWST
http://www.erpgenie.com/sd/create-new-condition-types-and-procedure
http://www.sap-img.com/sap-sd/steps-involved-in-condition-technique.htm
nag

Set-up tax Calculation procedure for Morocco

Where can I found information to set-up the tax Calculation procedure for Morocco and the VAT codes

Check whether this link is useful.
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Otherwise, check in google.
Regards,
Ravi

Set-up tax Calculation procedure for Israel

Where can I found information to set-up the tax Calculation procedure for Israel and the VAT codes

Check if this is any use:
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Regards,
Ravi

Condition table for access sequence (taxes calculation procedure)

Hi,
We need to perform tax calculation procedure in which there will be fields in condition table for a particular access sequence such that whenever we give the Country, Region and city in the condition table it will pick up the corresponding tax value.
Condition table field -- KOTABNR.
Path -->
FI -- **** -- Taxes on sales / purchase -- Check calculation procedure -- Access sequences.
Select tax calc say for country US with jurisdiction and check acess sequence. There we have condition table referred to as 53 and we can see the fields by clicking on fields.
How to create a new condition table.
Please guide me through asap.
Thanks and regards,
Priyajit Ghosh

Hi,
This does not allow us to create a new condition table. However we are allowed to change a standard SAP standard condition table. Is there any way to create a new Z table (condition table) . Please revert back asap.
Thanks and regards,
Priyajit

Tax jurisdiction for taxinj vs taxinn procedure

Hello,
I am trying to configure CIN, and would like know how system will determine the tax jurisdiction for taxinn procedure.
As if we use procedure taxinj then for tax code we can maintain the tax jurisdiction but if we use the procedure Taxinn then tax jurisdiciton field is not available. my question is does it mean tax jurisdiction from configuration perspective becomes irrelevant for taxinn procedure and system will determine the jurisdiction based on the address maintained in the configuration?
Appreciate your response.
regards
Bhaskar

On SAP oss there are several documents associated to different tax procedures are available.

Cayman Islands tax calculation procedure

Hi,
There appears to be no SAP standard calculation procedure for the Cayman Islands. I have a couple of Cayman Islands company codes that require a tax procedure. Could anyone help ??
Cheers.

Did you ever get an answer to this? I'm trying to do the exact same thing. Thanks.

Tax Calculation procedure

Dear Experts,
In the testing client the default tax calcualtion procedure is not available in our system for india.
This may be deleted by oversight.
Can you please suggest how to retireve this data
Venkatesan

Dear,
Thanks for the information.
Actually this procedure is not available in Training server.(IDES)
Can I have any suggestion to retrieve the data
Venkatesan

Tax Pricing Procedure TAXINJ

Hi Experts
The client requirement is to calculate Education Cess. Now we have same account key for in the pricing procedure for Tax and education cess so now everything is posting to same GL.
Now client wants to post Tax and education cesss separate GLu2019s can you please help me to change the Tax Pricing Procedure?
Requirement is like this
Tax %ge 10.3
10% Tax GL
2% ED Cess
1% Higher Edcess
Help

Hi,
Can you specify if you are looking for postings from MM or postings from SD?
In any case I believe you would need new condition type in you tax procedure and have a new account key if you need to post to separate GL`s. You can setup the new account keys to GL mapping through OB40.
Hope this helps.
Regards,
SGP

TAXINJ to TAXINN in 4.7 SAP

My client is currently using taxinj ( ED inventorizing ) in 4.7 system. Now they want to have tax credits & going as excise registration. can this be achieved in TAXINJ only Or can we configure taxinn in 4.7 only ?
Please let me know how to proceed in htis scenario. also what are the pre-requisities for the same.

Hi,
In TAXINJ also you can fulfill the tax credit requirement.
Please follow the steps for TAXINJ (Formula Based Tax Calculation):
1-Master data maintainance:(Maintain Chapter Id for Material,material Assessable Value,cenvate,vendor excise,Excise indicator for Plant)
2- Excise Rates-Excise Tax Rate i.e Cess Rates ,Exceptional Material Excise Rate, Quantity based AED and SED
3-Access Sequence-
Menu Path: IMG->Financial Accounting-> Financial Accounting Global Setting->Tax on Sales / Purchases->Basic Setting ->Check Calculation Procedure->Access Sequences.
Standard Access Sequence for tax procedure is JTAX & MWST. So we can use these without any modification. But if there is any specific requirement from client we can create a new Access Sequence by copying and modifying the existing one to meet that requirement.
4-Condition Type-
Menu Path: IMG->Financial Accounting->Financial Accounting Global Setting->Tax on Sales / Purchases->Basic Setting -> Check Calculation Procedure-> Define Condition Types.
For formula based Tax Calculations the MM tax conditions are as follows:
MM Excise Conditions
MWVS-Input tax ,JMO1- IN: A/P BED deductib, JAO1- IN: A/P AED deductib,JSO1- IN: A/P SED deductib, JMO2- IN: A/P BED non dedu, JAO2- IN:A/P AED nondeduct ,JSO2- IN:A/P SED non deductible
LST/CST/VAT Conditions
JIP3- IN: A/P ST setoff, JIP1- IN: A/P CST, JIP2- IN: A/P LST
Service Tax Conditions
JSER- IN: Service tax, JSVD- IN: Service tax debit
5-Tax Procedure Setting
Menu Path: IMG->Financial Accounting-> Financial Accounting Global Setting->Tax on Sales / Purchases->Basic Setting ->Check Calculation Procedure-> Define Procedures.
Tax calculation procedures TAXINJ containing the necessary specifications with grouping of above mentioned tax condition types, for the purpose of calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for Country Version India. The latest changes of Educational CESS and VAT needs to be added to the TAXINJ procedure.
6-Account Key Setting
Menu Path: IMG->Financial Accounting-> Financial Accounting Global Setting->Tax on Sales / Purchases->Basic Setting -> Check Calculation Procedure-> Check and Change Setting for Tax Processing.
7-Account Key
Standard Acc.keys are:
ESA - Output acquisitn tax, ESE- Input acquisitn tax, JI1- India Basic Excise, JI2- India Addl Excise, JI3- India Special Excise ,NVV- Non-d.input tax dist, VS5- Input Tax PST Gross
8-Assignment of Tax Procedure to Country
Menu Path: IMG->Financial Accounting-> Financial Accounting Global Setting->Tax on Sales / Purchases->Basic Setting ->Check Calculation Procedure-> Assign Country to Calculation Procedure.
Country IN - Tax procedure TAXINJ
9-Define Tax Codes
10-Assignment of Tax Code to Company Codes
This will complete the settings for TAXINJ.
Hope this will solve your query.
Thanks & regards,
Bijay Pradhan

TAX Calculation in SD

Dear SAP Gurus,
In the Tax calculation procedure TAXINJ
we maintain the Condition Types (JES4 Say!)
We then define the TAX Codes with the calcutaion
Tax Condtion type has Access MWST ( Country /Tax Code)
Now in the SD We define the same condtion type with Access JDUM and UTXJ with same access(JDUM).
I want to Know how thw system captures the taxes in the SD pricing when we are not defining any records......if it is taking from FI account ,
Can anyone explain me how it captures the same in depth..
Thanks in advance
regards,
Amlan Sarkar

Thanks for your inputs.
The Pricing procedure analysis as follows.
Basic price
Discounts
TAX
-->UTXJ ( Access JDUM=ININPlantTAX Calls CustoTax Cllasi Material)
Condition record : 100%.
-->JSE4 (Access JDUM KEY : Sales org/Destination Country)) Condition record had been found: 12%
-->JES4 (Access JDUM KEY :Sales Or/Destination Count)
Condition record has been found :1 %
-->JES(Access JDUM KEY :Sales Or/Destination Count)
Condition record has been found :2 %
All the Three Conditon types has same access as UTXJ !
Internally form where is the taxes getting captures.
reagrds,
Amlan

Tax Calculation in TAXINN procedure

Hi Seniors,
I know TAXINN procedure is condition based. But in FTXP while defining new tax codes, should i give value for the condition types there or need to create condition record in FV11 for all condition types ?? what are the condition types need to maintained for tax coces ? what is the difference between maintaining tax codes in TAXINJ and TAXINN ? Kindly explain me please.
Thanks&Regards,
Jana

Hi,
TAXINJ is a tax calculation procedure for country version India and it supports formula-based excise determination. You need to configure this tax calculation procedure
Excise Conditions
§         JMOD   IN: A/R BED
§         JNED    IN: A/R NCCD
§         JAED    IN: A/R AED
§         JSED    IN: A/R SED
§         JCES    IN: A/R Cess
§         JECS    A/R Educational CESS
LST/CST/VAT Conditions
§         JIN1      IN: A/R CST
§         JIN2      IN: AR LST
§         JIN4      IN: A/R CST Surcharge
§         JIN5      IN: AR LST Surcharge
§         JIN6      A/R VAT Payable
§         JIN7      A/R CST Payable VAT
○     Service Tax Conditions
§         JSE4    Service Tax
§         JES4    ECS on Service Tax
2.      Set up the following Account Key in the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Check and Change Settings for Tax Processing.
○     VS6    Input Tax
       3.      Define the Tax Procedure according to the settings in the figures below.
You can do this in the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Check Calculation Procedure ® Define Procedures.
4.      Assign Tax Procedure to the country.
You can do this in the IMG under Financial Accounting ® Financial Accounting Global Settings ® Tax on Sales/Purchases ® Basic Settings ® Assign Country to Calculation Procedure.
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination.
Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make the settings in Customizing for Logistics u2013 General, by choosing Taxes on Goods Movements ® India ® Basic Settings ® Excise Duties Using Condition Technique and u2026 ® Account Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
There are good liiks for both the precedures .Due to new rules i am not in a position to give them.
Regards,

Are tax procedures TAXIN and TAXINN same?

Guys, in OBYZ transaction I don't find TAXINN, I find only TAXIN. Are these one and the same? If not, how do I activate TAXINN in the system?
Regards,

Hi,
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique. The standard system comes with two tax calculation procedures:
- TAXINN - IN; India taxes new
- TAXINJ - Sales Tax India
TAXINN:
1. It is Condition Based Tax procedure.
2. Tax Code is required to be maintained in Condition Record, & if Tax Code is not found in Condition Record, Sales Cycle will go upto billing, but not release to accounting. Hence even a single Tax code may suffice the requirement for different Tax rate.
3. Tax condition record is maintain through TCode FV11.
4. It only supports condition-based excise determination.
TAXINJ:
1. It is Formula Based Tax procedure.
2. It was most commonly used upto initial phase of R/3 4.7, but the latter implementations were with TAXINN.
3. Tax Code plays a vital role, as the Tax Rate are maintained in Tax Code in TCode FTXP..
4. It is complex compared to TAXINN
5. It can supports both condition-based excise determination and formula-based excise determination.
6. For Example, code for 362 routine for Condition formula for alternative calculation type
Activation steps are same as above:
>Go to transaction code OBCO to define the tax procedure TAXINN and TAXINJ.
>Then assign country to tax procedure in transaction code OBBG
Regards,
Jyoti

CHANGE OVER FROM TAXINJ TO TAXINN

HI ALL ,
TAXINJ and TAXINN cannot co exist in the same system.
If you are talking about technical Upgrade, then I don't think this would be feasible since old Txn would have got posted with TAXINJ procedure with rates as defined in Tax codes and now after migration to TAXINN in same box, the system would pick value from Condition records.
Just check this basic point of feasibility before we go ahead and look for changes.
In SuN the change is for existing implementation, here at present they have R/3 4.7, and are now in the process of technical upgrade to ECC 6.00; TAXINN is required to be implemented in the upgraded version.
At present they are using around 129 pricing procedures, 25 sales org,220 tax codes in TAXINJ. Suzlon has 21 company codes, 219 plants and 1300 end users the whole nature of group activities results in use of all possible types of indirect taxes in India like VAT, CST, Excise, Service Tax etc...
i have tried to search on sap help, service market place and others but could not come across any document for the change over. However i will try again.
what are the things i need to take care before any implications busisneww point of view, what will be the status of open sales order and purchase orders, and splitting delivery docs. which are under process, what will be the cutoverstrategy.
need ur help and guidance, thanks in advance.
We are migrating from 4.7 to ECC 6.00 ( technical upgrade only), at the same time we will shift from TAXINJ to TAXINN,please let us know the steps requred to do this activity.
RELEASE NOTES OR OSSNOTES, ANY DOCUMENT STEP BY STEP IS REQUIRED asap.
CHEERS
SRI_CNU

Hi
Vasu Sri,
I got this document from some body might help u a bit.
Condition-Based Excise Determination in MM (New)
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), the system can calculate excise duties
and sales tax in Materials Management (MM) using the standard condition technique.
SAP has enhanced the existing tax procedure, TAXINJ, so that it now supports formula-based
and condition-based excise determination. The R/3 System also comes with a new tax procedure,
TAXINN, which only handles condition-based excise determination.
Which Tax Procedure Must I Use?
Existing customers must continue to work using the same tax procedure.
If you switch to a new tax procedure, you cannot display any documents that you have already
posted using the old tax procedure.
If you have worked with formula-based excise determination in previous releases and wish to
continue, you do not have to do anything. However, if you wish to start using the
condition-based excise determination method, proceed as specified below.
We recommend that new customers use the condition-based excise determination and tax
procedure TAXINN.
<b>How Do the New Functions Work?</b>
First, customize the system in the activities listed below. Then, for each material, create one
condition record for each form of excise duty and sales tax that applies, and enter the tax code
for purchasing documents (see below) in every condition record.
When you come to create a purchase order, enter the tax code in each line item. The tax code
tells the system whether to look in the condition types for formula-based or condition-based
excise determination
To set up the new excise determination method, carry out the following activities:
IMG activity
What to do
Check Calculation Procedure
Existing customers: Adjust your tax procedure to
match the changes to TAXINJ. Steps 560-583 are new, as are 593-598.
New customers: Create a copy of TAXINN.
Select Tax Calculation Procedure
New customers only: Assign the copy of
TAXINN to India.
Maintain Excise Defaults
New customers only: Enter the condition type
that you use for countervailing duty.
Define Tax Code for Purchasing Documents
Define a tax code.
Assign Tax Code to Company Codes
Assign the tax code to the company codes that it
is relevant for.
Classify Condition Types
Specify which condition types you want to use
for condition-based excise determination.
Define Tax Accounts
Check which G/L accounts the various taxes will
be posted to. Define G/L accounts for the account keys used in the tax procedure
6 MM
Materialwirtschaft
16.1 Country Version India in Standard R/3 System
Verwendung
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), Country Version India is no longer
delivered as an add-on but as part of the standard R/3 System.
Integration of functions in the SAP Easy Access menu
The functions for withholding tax have been integrated into the SAP Easy Access menu, under
Accounting -> Financial Accounting -> Accounts Payable -> Withholding Tax ->
India and Accounting -> Financial Accounting -> Accounts Receivable -> Withholding
Tax -> India.
You can access all other functions using the area menu J1ILN, which you can call from the
SAP Easy Access screen using the transaction code J1ILN.
Country Version India Implementation Guide
The Country Version India Implementation Guide (IMG) has been integrated into the standard
Reference IMG (see Changes to Structures for Country Version India).
Release Notes
You can access release notes from previous add-on releases using the links below.
SAP Library Documentation
The SAP Library documentation for Country Version India is also delivered on the standard
SAP Library documentation CD (see below).
New and Changed Functions
For information about new and changed functions for Country Version India, see the other
release notes for this release.
Auswirkungen auf den Datenbestand
You do not need to change any data.
Auswirkungen auf das Customizing
IMG activity
What to do
Activate Country Version India for Specific Fiscal Years
Delete the entry ZIND and
create a new entry for IND.
Siehe auch
SAP Library -> Financials or Logistics -> Country Versions -> Asia-Pacific -> India.
Release Notes from Country Version India Add-On (FI)
Release Notes from Country Version India Add-On (SD)
SAP AG
1
SAP-System
Page 9
Release Notes from Country Version India Add-On (MM)
16.2 Condition-Based Tax Calculation (New)
Verwendung
As of SAP R/3 Enterprise Core 4.70 (SAP_APPL 470), a new method for calculating taxes
in Brazil is available, which makes use of the standard condition technique. Tax rates, tax laws,
and special indicators that influence whether tax line items are included in the nota fiscal are all
stored in the system as condition records. An additional tax calculation procedure, TAXBRC, is
delivered for this new method, in addition to the existing one for Brazil, TAXBRJ.
Auswirkungen auf den Datenbestand
You can continue to calculate taxes using the former method: when the system processes the tax
procedure assigned to the country (TAXBRJ), it calculates the taxes externally by calling
function module J_1BCALCULATE_TAXES. We do, however, recommend that you assign the
new procedure TAXBRC and use the condition-based tax calculation functions, as it enables you
to flexibly adapt the tax calculation logic to cover new legal requirements or special customer
needs.
You will need to migrate your existing tax rate table entries to condition records, which you
can do directly from the Tax Manager's Workplace described below. You can check all tables
and subsequently convert the entries, whereby the system generates condition records. After the
initial migration, each time you create or change a tax rate table entry, the system automatically
generates a condition record as needed.
Auswirkungen auf das Customizing
If you want to employ the new condition-based tax calculation, you need to activate it and
carry out all related Customizing activities, under Financial Accounting -> Financial
Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Brazil
-> Condition-Based Tax Calculation, all of which are new:
o
Activate Condition-Based Tax Calculation
o
Map MM Tax Values to Nota Fiscal Fields
o
Map SD Tax Values to Nota Fiscal Fields
o
Map MM Tax Laws to Nota Fiscal Fields
o
Define Internal Codes for Tax Conditions
o
Assign Internal Codes for Tax Conditions to Condtion Types
o
Assign Tax Rate Tables to Condition Tables
In addition, you need to assign the new tax calculation procedure TAXBRC to the country in
Customizing, under Financial Accounting -> Financial Accounting Global Settings ->
Tax on Sales/Purchases -> Basic Settings -> Assign Country to Calculation Procedure.
A new Customizing tool called the Tax Manager's Workplace is available that enables you to
SAP AG
2
SAP-System
Page 10
make all tax-related settings for Brazil. You access it under the same path as above through
Tax on Sales/Purchases, then Calculation -> Settings for Tax Calculation in Brazil ->
Access Tax Manager's Workplace, or alternatively by entering transaction J1BTAX. You can
use the Tax Manager's Workplace regardless if you use condition-based tax calculation; it
simply brings all tax activities to a single transaction (only the Migration, Nota-Fiscal Mapping,
and Condition Mapping options under the Condition Setup pulldown menu are relevant only for
condition-based tax calculation).
16.3 Changes to Structures for Country Version India
Verwendung
As of SAP R/3 4.7, Country Version India is no longer delivered as an add-on, but forms part
of the standard system.
SAP has discontinued the Country Version India Implementation Guide (IMG) and has added its
activities have been added to the standard Reference IMG as follows:
Activities relating to withholding tax are now located in Customizing for Financial
Accounting (FI), under Financial Accounting Global Settings -> Withholding Tax.
Activities relating to excise duty and excise invoices are in Customizing for Logistics -
General, under Tax on Goods Movements -> India.
As far as the activities under Preparatory Activities are concerned, two of them (Activate
Country Version India for Accounting Interface and Activate Processes) are no longer
relevant and have been removed from the IMG entirely. The activity Execute Country
Installation Program is already included in the standard IMG under the name Localize Sample
Organizational Units. And the other two activities (Activate Country Version India for Specific
Fiscal Years and Activate Business Transaction Events) have been added to the standard IMG.
For information about other changes to the IMG relating to changes in the functions in Country
Version India, see the other release notes.
16.4 Release Notes from Country Version India Add-On (MM)
Verwendung
The Release Notes from Releases 3.0A and 4.0A of Country Version India for Materials
Managment (MM) are listed below. For more Release Notes, see the alias globalization in
SAPNet, and choose Media Center -> Country-Specific Documentation -> Country Version
India - Release Notes.
Release 3.0A
o
CENVAT Credit on Capital Goods After Budget 2000 (Changed)
o
Multiple Goods Receipts for Single Excise Invoices
SAP AG
3
SAP-System
Page 11
o
Enhancements to CVD Solution
o
Pricing Date Control in Excise
o
Order Price Unit in Excise
o
Alternate Assets MODVAT Capitalization
o
Enhancements for 57 F4
o
User Exits for Customer Validations
Release 4.0A
o
Procurement Transactions for Excise Invoices
o
New Transactions Based on User Roles for Incominng Excise Invoices
o
Capture Excise Invoices with Reference to Multiple POs for the Same Vendor
o
Capture Excise Invoice and Post CENVAT in a Single Step
o
Open Schedule Quantity Defaulted in Excise Capture for Scheduling Agreement
o
Accounting Document Simulation for CENVAT Postings
o
Rejection Codes for Excise Invoices
o
Single-Screen Transaction for All Excise-Related Entries
o
Stock Transfer Orders Through MM Route
o
Excise Invoices for Multiple Import Purchases
o
Customs Invoices Can Be Captured Using Logistics Invoice Verification and Conventional
Invoice Verification
o
Material Type at Line Item Level
o
Excise Invoice Capture Without PO
o
Excise Invoice Without PO - Capture and Post in a Single Step
o
Recalculation of Duty and Excise Defaults Restore Feature Available
o
Split of Nondeductible Taxes During Excise Invoice Capture
o
Error or Warning Messages Displayed at the Time of Saving
o
Reversal of Excise Duty
o
MIGO Solution Available as a Note 0408158 (Featuring All Functionalities as in MB01)
o
Excise Invoice Defaults in Excise Popup at Goods Receipt
o
Split Accounting Lines for CENVAT Posting
o
Authorization for Incoming Excise Invoices Extended
o
Authorization Available for Part I Entry at GR
o
Authorization Available for Register Update Transaction
o
User Exit Available for Incoming Excise Invoice Transaction for Defaulting Values
SAP AG
4
SAP-System
Page 12
o
User Exit Available for Incoming Excise Invoice Transaction Before Database Update
o
User Exit Available for Register Update for Validations on Fetched Records Based on
Selection Criteria
o
User Exit Available for Register Update of RGSUM Register
o
User Exit Available for Excise Invoice Create for Other Movements to Default the Excise
Details
o
Register Update Separately Handled for Receipts and Issues Based on Classification Code
o
Ship-From Vendor Can Be Defaulted and Captured in Incoming Excise Invoices for Other
Movements
o
Removal Time Can Be Captured in Excise Invoices for Other Movements
o
Field Selection of Incoming Excise Invoices
o
Transaction Code Customizing for Incoming Excise Invoices
o
Excise Group Setting for Part I Indicator for Blocked Stock, Stock Transfer Order, and
Consumption Stock
o
Multiple Goods Receipts and Multiple/Single Credit Settings Available at Excise Group
Level
o
Rejection Code Master Setting for Posting on Hold Is Available
o
Stock Transport Orders

Migration of Tax calculation procedure---TAXINJ to TAXINN

Similar Messages

Maybe you are looking for