Migration Scripts fail

So in the process of migrating Version 7 to Version 9 on both CUCM and UCCX. Upgrade went fine and systems are up and running. After importing the scripts, documents, prompts from old to new, they will not run. They pass validation and load as an application without error, but calling results in going straight to system default message. Active debug does not work as it fails before Triggering Contact? The script has no C:\ reference relics from old, so I am wondering what the issue is. How best to trouble shoot? These are relatively simple scripts so I guess I could just rewrite them. I note the partial service of the UCCX Engine, but dont know how to locate the cause. Might be something related to script failure? Any input? A;
Also how do I make sure the default language and prompt files are being used. I am thinking that maybe the scripts cant find the prompts? The old system did not use language and the new one does. Duh...

Hieronymous Merkin wrote:Active debug does not work as it fails before Triggering Contact?
Did you mean Reactive debugging? Because generally speaking you cannot Active debug a script that references the Triggering Contact. Also, by "Triggering Contact" did you mean that the script fails before the Accept step? If so, then does that mean that you are able to debug the script up until the Accept step? This could be a codec/media resource issue.
Hieronymous Merkin wrote:How best to trouble shoot?
Sounds like you've already done some work. I.e., You've reviewed your scripts for improper references to the C:\. You have validate your scripts. Etc. The next thing would be to review MIVR logs.
Hieronymous Merkin wrote:These are relatively simple scripts so I guess I could just rewrite them.
That is a possibility, but if the problem is not actually with the script, you'll be fighting a losing battle.
Hieronymous Merkin wrote:I note the partial service of the UCCX Engine, but dont know how to locate the cause. Might be something related to script failure? Any input? A;
You find out in the MIVR logs. But I would also recommend you pulling CUCM logs as well, as like I said before, if it's the Accept step where the script fails, then it's probably a codec/media resource issue, which will only be seen in CUCM logs.
Hieronymous Merkin wrote:Also how do I make sure the default language and prompt files are being used. I am thinking that maybe the scripts cant find the prompts? The old system did not use language and the new one does.
Look at the system default language. Look at the language on your triggers. Look at the MIVR logs to see which prompt files are being loaded (it gives the full path in the log file).
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Similar Messages

How to automatically create the custom migration scripts after recreating SSMA project?

How to automatically create the custom data migration scripts after recreating SSMA project?
There is number of tables ( big tables with BLOBS) which I want to set up automatically to be migrated with custom migration scripts (replacing e.g. attribute named "FILE" with "TO_BLOB('') AS FILE" ).
So the question is how to open MB file (I think that it should be standard db of some destktop RDBMS) ?

Hi Roman.Pokrovskij,
According
to your description, we can use SSMA tool to migrate data from one database (including Access, Oracle and so on) to SQL Server via GUI or the scripts. There is an example about migrating Access database to SQL Server via the
custom migration scripts, you can review refer to them.
<?xml version="1.0" encoding="utf-8"?>
<ssma-script-file xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Microsoft SQL Server Migration Assistant for Access\Schemas\A2SSConsoleScriptSchema.xsd">
<config>
<output-providers>
<output-window suppress-messages="false"
destination="stdout"/>
<upgrade-project action="yes"/>
<data-migration-connection source-use-last-used="true"
target-server="target_1"/>
<progress-reporting enable="false"
report-messages="false"
report-progress="off"/>
<object-overwrite action="skip" />
</output-providers>
</config>
<servers>

<sql-server name="target_1">
<sql-server-authentication>
<server value="$SQLServerName$"/>
<database value="$SQLServerDb$"/>
<user-id value="$SQLServerUsrID$"/>
<password value="$SQLServerPassword$"/>
<encrypt value="true"/>
<trust-server-certificate value="true"/>
</sql-server-authentication>
</sql-server>
</servers>
<script-commands>
<create-new-project project-folder="$project_folder$ "
project-name="$project_name$"
overwrite-if-exists="true"/>
<connect-target-database server="target_1"/>
<load-access-database database-file="$AccessDbFolder$\$AccessDatabaseFile$"/>---

<map-schema source-schema="$AccessDatabase$" sql-server-schema="$SQLServerDb$.dbo" />


<convert-schema object-name="$AccessDatabase$"
object-type="Databases"
conversion-report-overwrite="true"
verbose="true"
report-errors="true" />


<synchronize-target object-name="$SQLServerDb$.dbo"
on-error="fail-script" />


<migrate-data object-name="$AccessDatabase$.Tables"
object-type="category"
report-errors="true"
verbose="true"/>
</script-commands>
</ssma-script-file>
There is a similar scripts about migrating Oracle database to SQL Server, you can use powershell script to automatically run the console for scripts/variable files, saved in the specified folder. For more information, review the following
article.
http://blogs.msdn.com/b/ssma/archive/2010/09/09/performing-database-migration-assessment-using-ssma-console-application.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Trouble with Post Migration Scripts

I try to run the volrepair script but am getting errors. I have run the Update NDS option from nssmu but still now luck.
ccs_fs1:~ # /opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H "ldaps://192.168.0 .6" -x -D "admin.ccboe" "(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning: The following NSS Pools does not exist on the source server. Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server. Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS

$(UYou need to have the same set of pools and volumes on the source server and target server (atleast the names should be identical).
The error says the pools or volumes that exists on the target server doesn't match with those on the source server.
Try updating them from nssmu or iManager.
Refer section "9.0 Preparing for Transfer ID -> 9.1. Prerequisites " of http://www.novell.com/documentation/....html#bookinfo
-Ramesh
>>>
From:
dmilam<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
05/03/2010 11:06 PM
Subject:
Trouble with Post Migration Scripts
I try to run the volrepair script but am getting errors. I have run the
Update NDS option from nssmu but still now luck.
ccs_fs1:~ #
/opt/novell/migration/sbin/serveridswap/scripts/repair/volrepair.rb -a
admin.ccboe -p darabc -f /var/opt/novell/migration/
Information: Checking NSS status ...
Information: Getting GUID for NSS Pool ADMIN
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_ADMIN_POOL)(objectClass=nssfsPool)) " "g uid" -W
Error: Failed to get guid for pool ADMIN
Information: Getting GUID for NSS Pool APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 ..6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS_POOL)(objectClass=nssfsPoo l))" "gu id" -W
Error: Failed to get guid for pool APPS
Information: Getting GUID for NSS Pool SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS_POOL)(objectClass=nssfsPool ))" "gui d" -W
Error: Failed to get guid for pool SYS
Information: Getting GUID for Volume APPS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_APPS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume APPS
Information: Getting GUID for Volume SYS
Information: Executing LC_ALL=en_US;ldapsearch -LLL -s sub -H
"ldaps://192.168.0 .6" -x -D "admin.ccboe"
"(&(CN=CCS_FS1_SYS)(objectClass=Volume))" "guid" -W
Error: Failed to get guid for Volume SYS
Information: Updated NSS Pool objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Information: Updated NSS volume objects successfully
Information: MPVGUID v1.1 - Modify Pool or Volume GUID
List is Empty, there are no Volumes
GUIDModify failed, status -1
Failed to Parse the XML from Buffer
Warning:The following NSS Pools does not exist on the source server.
Use "nssmu " option "Update NDS" for these Pools to repair.
Warning: ADMIN
Warning: APPS
Warning: SYS
Warning: The following NSS Volumes does not exist on the source server.
Use "nss mu" option "Update NDS" for these Volumes to repair.
Warning: APPS
Warning: SYS
dmilam
dmilam's Profile: http://forums.novell.com/member.php?userid=11991
View this thread: http://forums.novell.com/showthread.php?t=409414

Script fails when passing values from pl/sql to unix variable

Script fails when passing values from pl/sql to unix variable
Dear All,
I am Automating STATSPACK reporting by modifying the sprepins.sql script.
Using DBMS_JOB I take the snap of the database and at the end of the day the cron job creates the statspack report and emails it to me.
I am storing the snapshot ids in the database and when running the report picking up the recent ids(begin snap and end snap).
From the sprepins.sql script
variable bid number;
variable eid number;
begin
select begin_snap into :bid from db_snap;
select end_snap into :eid from db_snap;
end;
This fails with the following error:
DB Name DB Id Instance Inst Num Release Cluster Host
RDMDEVL 3576140228 RDMDEVL 1 9.2.0.4.0 NO ibm-rdm
:ela := ;
ERROR at line 4:
ORA-06550: line 4, column 17:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev sum variance
execute forall merge time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> pipe
The symbol "null" was substituted for ";" to continue.
ORA-06550: line 6, column 16:
PLS-00103: Encountered the symbol ";" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable> avg
count current exists max min prior sql stddev su
But when I change the select statements below the report runs successfully.
variable bid number;
variable eid number;
begin
select '46' into :bid from db_snap;
select '47' into :eid from db_snap;
end;
Even changing the select statements to:
select TO_CHAR(begin_snap) into :bid from db_snap;
select TO_CHAR(end_snap) into :eid from db_snap;
Does not help.
Please Help.
TIA,
Nischal

Hi,
could it be the begin_ and end_ Colums of your query?
Seems SQL*PLUS hs parsing problems?
try to fetch another column from that table
and see if the error raises again.
Karl

Start up script fails; Unable to boot...Please, Help.

This is my first major problem that I have had with this computer. It has been running fine until this past Sunday night. I was running AOL, Firefox & iTunes. The computer was running slow and iTunes was skipping frequently. I rebooted and resumed my activities only to have the same problems and the computer booted slower than usual. I closed all my applications and rebooted once again. Then, I ran Disk Utility had used Verify Disk. It found an error on my system volume stating an incorrect block count in one sector and referenced a file cache_003, all other volumes passed. Disk Utility was unable to repair the volume. Repair Disk ran slow. I did a search for the file cache_003 and discovered that it was part of a Netscape profile back up on a different partition. I deleted the profile and used Disk Utility again. This time, the system volume passed and a different volume failed due to incorrect block size, Repair Disk failed. The next time I tried to boot the computer the gray screen with apple and loading indicator came up and stayed for several minutes followed by a blue screen with loading indicator for several minutes and stayed blue for nearly 40 minutes. Eventually, the screen went black and displayed that the start up script failed. Here is some of what was displayed.
Darwin/BSD(Computer Name-Computer.local)(console)
System Starter[35]
login date&time Internet Sharing[96]:Libinfo[Socket_open():2318]connect():2318]connect:()connection refused (This line repeated continuously)
I am able to input commands at this stage but I am not knowledgeable enough to know what to do.
When I push the power button to turn it off the computer beeps once and the led light flashes three times and turns off.
Each time when I attempt to boot either into Safe Mode or from the Software Install DVD I encounter the same problem.
Now, Monday night by chance on another boot attempt the computer started up although it took about 20-30 minutes. It was missing one volume which showed up in Disk Utility under a different name. While I had the computer up I backed up what I could on the volumes that mounted. One file I was unable to burn using Toast 9 due to a data fork error. The computer eventually froze during my activities and since I have had no luck at my start up attempts and have had the same problem. Luckily, I was able to back up everything I needed with the exception of what was on the AWOL volume.
The last thing I had installed recently was the latest Security Update which went fine and was two days before the trouble started.
I am at a loss for what to do next. I would like to retrieve the files on that one volume but at this point if I can start up I would just like to reformat and install the OS.
Any help with this problem would be much appreciated. Thank you.

Well, originally when I ran Disk Utility, although it performed slower than usaual it found the error as previously mentioned and was unable to Repair Volume. As to using the Hardware Disc & Install Discs(original & Tiger) the computer failed to boot although you could hear the disc spinnning for awhile. In both and every instance regardless of any or no disc, the computer starts the boot process and you see the gray screen with white apple and loading indicator for about 3 minutes then it switches to the blue screen with loading indicator. After quite some time the loading indicator goes away and it's just a blue screen for nearly a half-hour followed by a black screen which starts the above prompt. I can post all of what that said later as I have written all of it down at home, a portion of it is in my original post. The start up chime doesn't sound at all. I do get a tone and flashing LED lights when I hold the power button down to turn it off after the above described boot process. There is not much I can do except try and try again. I may need to get a new hard drive but I would like to resolve it without doing so if possible. When trying to boot from both discs I was holding down the C key as directed and I have tried just letting the computer boot with disc in drive without any key interaction.

Getting Error in Adobe Form as Script failed (language is formcalc:context

Hi Experts,
While acessing Adobe forms from MSS ,
After Selecting the Scenario
After Edit Form
Before the form is Displayed
I am getting a POP-UP message stating the following Error.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0]. PCR_PAGE1[0].PCRheader[0].EmployeeDataCI[0].EmployeeDataCIContent[0].EmployeeInfo[0])
Script=concat($record.ENAME.DATA.FIELD,u201D(u201C,$record.PERNR.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.ENAME.DATA.FIELDu2019is unknown.
Script failed (language is formcalc;context is xfa[0].data[0].RequestSeparationEnhanced[0].PCR_PAGE1[0].PCR_DE[0].PCRDEContent[0].RequestSeparationEnhanceDDLOverlay[0])
Script=concat($record.MGTXT.DATA.FIELD,u201D(u201C,$record.MASSG.DATA.FIELD,u201D)u201D)
Error: acessor u2018$record.MGTXT.DATA.FIELDu2019is unknown.
ENAME & MGTXT are the fields which has to be displayed by default when the form is shown.
But when the Adobe form is displayed it comes without any Value for ENAME - Employee Name
MGTXT - Reason for Action Text .
Please provide me solution to over come this problem.
Thanking you in advance,
Suriya.

This was fixed by commenting the script in the form since I don't require it.
Suriya

The Group Policy client-side extension Scripts failed ...

This is an error I've been seeing forever and it was always the impression that upgrading would resolve it, but it never has even in 10.3. 100% of our users get these errors in the Event Viewer:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1085
Date: 10/21/2010
Time: 8:04:52 AM
User: NT AUTHORITY\SYSTEM
Computer: XXXXXX
Description:
The Group Policy client-side extension Scripts failed to execute. Please look for any errors reported earlier by that extension.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
We also seem to have flakey policy issues where once in awhile a user will not be able to logon to Windows with Workstation Only while getting the " not allowed to logon interactively" message, other times the users report not being able to access the Windows Date and Time Properties and further sometimes they are unable to make system changes.
We have troubleshooted this and the only resolutions we've found are to run zac cc, zac ref, zac pl and sometimes it seems like deleting c:\windows\system32\grouppolicy will help.
In regards to the Event Viewer entry I posted, on any given machine I can issue the command gpupdate and it will put another entry into the Event Viewer (sometimes multiple ones). I've learned through research that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the errors go away, but once the policy is refreshed they come right back.
This is the version ZenWorks gives the users:
[General]
gPCFunctionalityVersion=2
gPCFunctionalityVersion=2
gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
Version=6488106
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
This is the version I cleaned up:
[General]
gPCFunctionalityVersion=2
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
I'm not sure how to get Zenworks to use the cleaned up version nor and I too sure what those extra extensions are and how they got in there. I may need to contact Novell in regards to this, but since I'm already working on an SR with them I figured I'd go ahead and post here first.
Any help or advice would be greatly appreciated.

Here are the groups I'm using. NOTE: These have been in affect throughout the issues experienced. Users will work perfectly fine then suddenly the problem will start happening without any policy change on our side.
-Member of-
Network Configuration Operators+
Remote Desktop Users+
Users+
-Assigned Rights under a group I called "Other Rights"-
Access this computer from network
Change the system time
Log on locally
Shut down the system
The only condition I have is that these issues happen when logging in Workstation Only and I'm not able to recreate the problem on demand with tests.
Originally Posted by craig_wilson
The "Interactive Logon" is a Windows Security Permission.
It is generally assigned to certain local groups such as "User".
Which groups are assigned this right can be changed manually and
controlled by local security policies.
When user's get this error, it generally means their account is not in a
local group that has been assigned that right.
If using "DLU", make sure the user accounts are a member of "Users".
And If anyone was messing with security policies, make sure they did not
take away "Interactive Logons" from anyone.
On 10/29/2010 7:06 AM, jcsmith1 wrote:
>
> Thanks for replying craig.
>
> My policy woes have only grown since my first post. We are currently
> testing the removal of administrative rights and now we're having
> teleworkers (who login Workstation Only) getting the message "policy
> does not allow interactive login". What -seems- to fix it is a zac cc,
> zac ref and zac pl, however we just started getting call backs from
> users.
>
> I seem to have no further leads and Novell's ZenWorks tech supports
> seems to be going through some kind of painful-to-the-customer
> transition as one of my thoughts on resolving the issue is to go to 10.3
> or 10.3.1, but my Satellites appear to be upgrading but in reality do
> not upgrade (but the primary servers upgraded) (See SR 10655976331).
>
> Does anyone knows how to troubleshoot policy issues when the users
> aren't loggin into ZCM?
>
> craig_wilson;2036646 Wrote:
>> See: 'Group Policy Error: The Group Policy client-side extension Script
>> failed to execute.'
>> (Group Policy Error: The Group Policy client-side extension Script failed to execute.)
>>
>> This would never be fixed in any patch, since it would be the job of
>> GPEDIT to properly maintain the GPT.INI.
>>
>> Most of the Time these errors are cosmetic and caused by stray script
>> extensions.
>>
>> You may want to create an Enhancement Request to allow the creation of
>> "Filters" so certain errors are discarded and not sent to the DB/ZCC.
>> This way an Admin could choose to filter out various error messages
>> that
>> they deem are not actually of concern.
>>
>> On 10/21/2010 9:36 AM, jcsmith1 wrote:
>>>
>>> This is an error I've been seeing forever and it was always the
>>> impression that upgrading would resolve it, but it never has even in
>>> 10.3. 100% of our users get these errors in the Event Viewer:
>>>
>>> -Event Type: Error
>>> Event Source: Userenv
>>> Event Category: None
>>> Event ID: 1085
>>> Date: 10/21/2010
>>> Time: 8:04:52 AM
>>> User: NT AUTHORITY\SYSTEM
>>> Computer: XXXXXX
>>> Description:
>>> The Group Policy client-side extension Scripts failed to execute.
>>> Please look for any errors reported earlier by that extension.
>>>
>>> For more information, see Help and Support Center at
>>> http://go.microsoft.com/fwlink/events.asp.
>>> -
>>> We also seem to have flakey policy issues where once in awhile a
>> user
>>> will not be able to logon to Windows with Workstation Only while
>> getting
>>> the " not allowed to logon interactively" message, other times the
>> users
>>> report not being able to access the Windows Date and Time Properties
>> and
>>> further sometimes they are unable to make system changes.
>>>
>>> We have troubleshooted this and the only resolutions we've found are
>> to
>>> run zac cc, zac ref, zac pl and sometimes it seems like deleting
>>> c:\windows\system32\grouppolicy will help.
>>>
>>> In regards to the Event Viewer entry I posted, on any given machine
>> I
>>> can issue the command gpupdate and it will put another entry into
>> the
>>> Event Viewer (sometimes multiple ones). I've learned through
>> research
>>> that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the
>> errors
>>> go away, but once the policy is refreshed they come right back.
>>>
>>> This is the version ZenWorks gives the users:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
>>>> Version=6488106
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> This is the version I cleaned up:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> I'm not sure how to get Zenworks to use the cleaned up version nor
>> and
>>> I too sure what those extra extensions are and how they got in there.
>> I
>>> may need to contact Novell in regards to this, but since I'm already
>>> working on an SR with them I figured I'd go ahead and post here
>> first.
>>>
>>> Any help or advice would be greatly appreciated.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Ecatt script fails due "Error in OLE API method Call" error

Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha

>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN.

Migration Assistant fails after showing 157 KB or 0 KB to transfer

I spent 4 days trying to get OS X Migration Assistant to successfully migrate between two desktop machines, both running Mavericks 10.9.3.
The two machines were connected by an ethernet cable, and all migrations would fail after 16-24 hours, with the progress bar stalling out at "Less than one minute remaining".
Before every failed transfer, Migration Assistant would inaccurately show "157 KB selected" for transfer if the "Computer & Network Settings" option was checked, or "0 KB selected" for transfer if only the "Applications" or "Documents & Data" options were checked.
I finally realized that the migrations were failing because I was opening and clicking through Migration Assistant on both the source and target machines at around the same time.
The eventual solution was to open Migration Assistant on the source machine first, and click through as far as I could until the source machine was actively looking for other machines on the network.
As long as I waited until then to open Migration Assistant on the target machine, it would correctly calculate the size of the files to be transferred and the migration would succeed.
So, the order in which you open Migration Assistant seems to make a big difference: source first, then target.
My problem is solved, but only after several days of hassle, so I wanted to post this in case other people had a similar issue.
(I tried many suggested fixes that did not work, included reinstalling OS X on the target machine, running disk repair and fixing permissions on both source and target, changing file sharing on the source machine to include the whole drive, trying to migrate Applications and Documents & Data separately, turning off wifi before the transfer, etc.)

Thanks for posting this. I was having the same problem. You saved me hours, maybe days, of frustration!

Migrate script to Smartforms

Hello ,
<b>Background :</b>
1) After I migrate Script to smartforms . I get around 200 windows .
As 200 windows have been defined in a script .( 1 window per box).
2) The layouts are pretty complex and it would take around 2-3 days to create a new smartform .
3) I cannot use the existing scripts for a few modifications have to be made to header and footer and it's easier to make them in smartforms
4)The output after migration is good . A few Modifications But it's fine.
<b>Problem :</b>
i)Would it lead to a performance problem due to presence of 200 windows if I migrate .
ii)Would it lead to maintainance problem if I migrate as I cannot see all the 200 windows at once in the form painter . I can see only the window on which I have placed the cursor .
Kindly Help me find a solution.

Thanks Sooness .
Actually there are around 12 scripts .
So Total Development time will be around 30 days if I create a new smartform. since the layout is very complex .
And 9 days if I migrate scripts to smartforms with changes ..
So the Conflict in my my mind is whether to go for less Development Time now and maintainance problem later
<b>Would a good TS / FS documented as follows suffice :</b>
1) By taking a printout of the layout .
2)Writing the variable name in each window .
3)Scanning it and using it as FS.
I feel FS/TS is usually not read afterwards .
So even after documentation , Maintainace problem will not be solved .
I do not have that much time . So I would have to put extra efforts at night for creation of new smartforms.
i have to deliver them in 15/20 days .
So Do you suggest putting extra efforts now to make a new smartforms to avoid maintainence problem later .
Kindly give your valuable suggestion.
Message was edited by:
Gaurav
Message was edited by:
Gaurav

SCOM 2012 SP1 - PowerShell Script failed to run - 3 alerts appear after every reboot of the SCOM Server

Brand new SCOM 2012 SP1 install with Update Rollup 1 applied
Single server, local SQL install, SQL Server 2012 SP1
Hyper-V VM running on Server 2012. VM has 8GB Ram, single vCPU
Going through initial management pack importing and configuration, at this point I have the Windows Server 2012 and SQL 2012 MP's installed.
See screenshot
http://i.imgur.com/l0Molh1.png
I am getting the following alerts in my SCOM console and cannot find a resolution to fix the issue. I don't want to set an override, as an override will prevent the PowerShell alert in other instances, where I might want to receive an alert.
Looking at the alert description, it states "The Data Access service is either not running or not yet initialized"
The SCOM Console launches and responds fine, and I get no other errors. I check the Data Access service and it is online. I have left the system alone for a couple of hours and no other errors. I then closed those alerts and restarted the
server, and they came right back in, so I know that this is something that is happening at either server startup of during the start of the SCOM services.
Is it possible that SCOM is trying to execute these scripts and the Data Access service has not come online yet?
Has anyone else come across this before?

Please try the method in the following thread:
Note: As there is operations related to Registry, please perform a backup before doing this.
OpsMgr 2012 - Power Shell Script failed to run
http://social.technet.microsoft.com/Forums/de-DE/systemcenterde/thread/4be37f8d-1e7b-450c-8cb9-f1e95f3b2bd0/
Thanks.
Nicholas Li
TechNet Community Support

Oracle Open Script - Failed to open script error

I am receiving the following error when trying to open a script in Oracle open script
'Failed to open script' has encountered a problem.Failed to open <script_name>. See error log for details.
I have tried the Giri Mandalika's solution but there is no "<failing_script_name>" folder in specified path.
Can someone please help me to resolve this issue ?

Hi ,You can try deleting the osworkspace folder .The folder should be at C:\Users\<username>\. May be take a back up copy of the folder before deleting it.Let me know if it works.

The PowerShell script failed with below exception

I'm receiving the following errors on all SQL Express Servers (every machine that has SQL Express inside).
it seems that the discovery has found SQL Express but could not connect to the instance.
details on the alerts:
Date and Time:
10/22/2013 12:04:22 PM
Log Name:
Operations Manager
Source:
Health Service Modules
Generating Rule:
Collect Power Shell Module Events
Event Number:
22406
Level:
Error
Logging Computer:
SQLEXPRESS.DOMAIN.COM
User:
N/A
Description:
The PowerShell script failed with below exception
System.Management.Automation.RuntimeException: Exception calling "Fill" with "1" argument(s): "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not
accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"
At line:44 char:19
+ $SqlAdapter.Fill <<<< ($DataSet)|out-null
at System.Management.Automation.FlowControlNode.Execute(Array input, Pipe outputPipe, ExecutionContext context)
at System.Management.Automation.ParseTreeNode.Execute(Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
at System.Management.Automation.StatementListNode.ExecuteStatement(ParseTreeNode statement, Array input, Pipe outputPipe, ArrayList& resultList, ExecutionContext context)
Script Name: StolenServerMemory2008.ps1
One or more workflows were affected by this.
Workflow name: Microsoft.SQLServer.2008.DBEngine.StolenServerMemoryMonitor
Instance name: SQLEXPRESS
Instance ID: {9705795C-4F3B-C2EF-AA7D-C736B40FD6A4}
Management group: SCOMGROUP

Some additional inf.
http://stackoverflow.com/questions/6466974/unable-to-connect-to-sql-express-error-26-error-locating-server-instance-speci?rq=1
anyway you can disable this rule/monitor as no control from monitoring solution in that case. Or try to rewrite the same monitor...
The problem in your case is when function tries to get Max Server Memory MB by connecting to master DB, but you can replace it with performance counter like Target Server Memory (KB)...
just see the function main in StolenServerMemory2008.ps1 and what you need to replace
$api = New-Object -comObject "MOM.ScriptAPI"
$bag = $api.CreatePropertyBag()
$msg = [Environment]::NewLine
$err = [Environment]::NewLine
#try {
$maxMemoryMB = GetMaxServerMemoryMB $ComputerName $InstanceName
$stolenPages = (Get-Counter ("\" + $PerformanceCounterObject + ":Buffer Manager\Stolen Pages")).CounterSamples[0].CookedValue
$pakeSizeKB = 8
[double]$stolenMemoryMB = $stolenPages * $pakeSizeKB / 1024
[double]$stolenMemoryPercent = 0
if($maxMemoryMB -gt 0){
[double]$stolenMemoryPercent= 100.0 * $stolenMemoryMB / $maxMemoryMB
$bag.AddValue("StolenMemoryMB", $stolenMemoryMB)
$bag.AddValue("StolenMemoryPercent", $stolenMemoryPercent)
$msg += "StolenMemoryMB=$stolenMemoryMB StolenMemoryPercent=$stolenMemoryPercent"
$msg += [Environment]::NewLine
#debug $api.LogScriptEvent("SQL 2008 Stolen Server Memory data source", $SCRIPT_EVENT_ID, $INFORMATION_EVENT_TYPE, $msg + $err)
#catch {
#             $header = "Managegement Group: $Target/ManagementGroup/Name$. Script: {0}" -f ($MyInvocation.MyCommand).Name.ToString()
#             $msg += "Error occured during SQL 2008 Stolen Server Memory data source executing.{0}Computer:{1} {0}Reason: {2}" -f [Environment]::NewLine, $env:COMPUTERNAME, $_.Exception.Message
#             $api.LogScriptEvent($header, $SCRIPT_EVENT_ID, $ERROR_EVENT_TYPE, $msg + $err)
$bag

SQL migration scripts for MS SQL and Oracle when leaving Pointbase

We have created a project that has some data in pointbase that is Portal related
and need to migrate that information to MS SQL. Has anyone written or know of
migration scripts that would move the data? Thanks in advance.
Sincerely,
Eric Ballou

Here is a progression of the steps I'm taking in picture:
Start
http://img136.imageshack.us/my.php?image=oracle1ry9.jpg
http://img504.imageshack.us/my.php?image=oracle2xt5.jpg
http://img401.imageshack.us/my.php?image=oracle3id0.jpg
http://img185.imageshack.us/my.php?image=oracle4pp7.jpg
http://img76.imageshack.us/my.php?image=oracle5vi1.jpg
End
http://img73.imageshack.us/my.php?image=oracle6jl5.jpg
Message was edited by:
Cybercat

CJS-00084 SQL Statement or Script failed. Error Message: Executable

Hello
Hello
I am facing one problem at the time of installing 4.7 IDES can you please guide me on that. Do I need to reinstall system ageing or it can be sort it out in this stage.
ERROR AT THE TIME OF INSTALLING SAP 4.7 IDES ARE
1. CJS-00084 SQL Statement or Script failed. Error Message: Executable
C:\oracle\ora92/bin/sqlplus.exe returns 3.
2. FJS-00012 Error when executing script.
Complete error log :--
INFO 2000-06-15 20:56:57
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: C:\oracle\ora92\database\initGOD.ora.
INFO 2000-06-15 20:56:57
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2000-06-15 20:56:57
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl stat' returned with '3'.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl start' returned with '0'.
INFO 2000-06-15 20:56:58
Copying file D:/SAP_DUMP/CD1/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 20:57:00
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 20:57:00
FJS-00012 Error when executing script.
INFO 2000-06-15 20:56:57
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: C:\oracle\ora92\database\initGOD.ora.
INFO 2000-06-15 20:56:57
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2000-06-15 20:56:57
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl stat' returned with '3'.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2000-06-15 20:56:58
See 'C:\oracle\ora92/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2000-06-15 20:56:58
'C:\oracle\ora92/bin/lsnrctl start' returned with '0'.
INFO 2000-06-15 20:56:58
Copying file D:/SAP_DUMP/CD1/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2000-06-15 20:56:58
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 20:56:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 20:57:00
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 20:57:00
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:29
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:29
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:37
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:37
FJS-00012 Error when executing script.
INFO 2000-06-15 21:04:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:04:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:04:51
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:04:51
FJS-00012 Error when executing script.
WARNING 2000-06-15 21:07:00
Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (276), with parameter (C:\oracle\ora92/bin/sqlplus.exe /NOLOG @ora_scr_tmp.sql).
ERROR 2000-06-15 21:07:00
MDB-06029 Caught exception while trying to start script executing application: [C:\oracle\ora92/bin/sqlplus.exe].
ERROR 2000-06-15 21:07:00
MDB-06030 A call to the system library failed. System error message: [No such file or directory].
ERROR 2000-06-15 21:07:00
MUT-02011 Internal error: A call to syslib failed. System error message: No such file or directory.
ERROR 2000-06-15 21:07:00
FJS-00012 Error when executing script.
WARNING 2000-06-15 21:11:52
Error 1326 (Logon failure: unknown user name or bad password.
) in execution of a 'LogonUser' function, line (537), with parameter (SAPTRANSHOST\godadm).
ERROR 2000-06-15 21:11:52
MDB-06029 Caught exception while trying to start script executing application: [C:\oracle\ora92/bin/sqlplus.exe].
ERROR 2000-06-15 21:11:52
MDB-06030 A call to the system library failed. System error message: [Unknown error].
ERROR 2000-06-15 21:11:52
MUT-02011 Internal error: A call to syslib failed. System error message: Unknown error.
ERROR 2000-06-15 21:11:52
FJS-00012 Error when executing script.
INFO 2000-06-15 21:11:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:11:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:11:54
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:11:54
FJS-00012 Error when executing script.
INFO 2000-06-15 21:13:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-15 21:13:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-15 21:13:42
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-15 21:13:42
FJS-00012 Error when executing script.
INFO 2000-06-16 02:00:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:00:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:00:07
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:00:07
FJS-00012 Error when executing script.
INFO 2000-06-16 02:08:16
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:08:16
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:08:18
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:08:18
FJS-00012 Error when executing script.
INFO 2000-06-16 02:09:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:09:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:09:49
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:09:49
FJS-00012 Error when executing script.
INFO 2000-06-16 02:14:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2000-06-16 02:14:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2000-06-16 02:14:33
CJS-00084 SQL Statement or Script failed. Error Message: Executable C:\oracle\ora92/bin/sqlplus.exe returns 3.
ERROR 2000-06-16 02:14:33
FJS-00012 Error when executing script.

> WARNING 2000-06-15 21:07:00
> Error 2 (The system cannot find the file specified.
> ) in execution of a 'CreateProcess' function, line
> (276), with parameter
> (C:\oracle\ora92/bin/sqlplus.exe /NOLOG
> @ora_scr_tmp.sql).
> ERROR 2000-06-15 21:07:00
> MDB-06029 Caught exception while trying to start
> script executing application:
> [C:\oracle\ora92/bin/sqlplus.exe].
> ERROR 2000-06-15 21:07:00
> MDB-06030 A call to the system library failed.
> System error message: [No such file or directory].
> ERROR 2000-06-15 21:07:00
> MUT-02011 Internal error: A call to syslib failed.
> System error message: No such file or directory.
> ERROR 2000-06-15 21:07:00
> FJS-00012 Error when executing script.
> WARNING 2000-06-15 21:11:52
> Error 1326 (Logon failure: unknown user name or bad
> password.
> ) in execution of a 'LogonUser' function, line (537),
> with parameter (SAPTRANSHOST\godadm).
> ERROR 2000-06-15 21:11:52
> MDB-06029 Caught exception while trying to start
> script executing application:
> [C:\oracle\ora92/bin/sqlplus.exe].
is that file there (sqlplus)?
as which user are you installing?
Markus

Migration Scripts fail

Similar Messages

Maybe you are looking for