Oracle Open Script - Failed to open script error

I am receiving the following error when trying to open a script in Oracle open script
'Failed to open script' has encountered a problem.Failed to open <script_name>. See error log for details.
I have tried the Giri Mandalika's solution but there is no "<failing_script_name>" folder in specified path.
Can someone please help me to resolve this issue ?

Hi ,You can try deleting the osworkspace folder .The folder should be at C:\Users\<username>\. May be take a back up copy of the folder before deleting it.Let me know if it works.

Similar Messages

Open dataset fails...says "error opening input file"

Hi,
I am trying to open a file in my BDC program and get the following error "error opening input file". Its a text file with continuous data. No delimiters and hence character count will be used to parse the data.
I am using the following statement to open it..
OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
but sy-subrc is set to 8 !!
what could be the problem ??
thanks

This is pretty confusing !!I would explain to you my exact issue !!
I have a program in which there is no GUI_UPLOAD call but just a direct open dataset statement !!
This program runs fine for my collegue who has the file in a server (not the application server). She gives the full path name as
servername\foldername\filename.
I tried doing the same but as I did not have access to that server, it failed. So I received that file from her and stored it in my local system. So on program execution, i gave the path as c:\filename and I got the error message "Error opening the file"
Find below some code extracts..
PARAMETERS : p_sname TYPE d0100_mapn ,
             p_file(136) TYPE c ,
FORM open_file .
*open file in textmode
OPEN DATASET p_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc = 0.
    DO.
    Read the file data and tranfer to workarea to internal table
      READ DATASET p_file INTO x_legacy_rec.
Please help in debugging this issue !!
thanks

Reboot and shut down scripts failed on open dialogue window

I have a headless server.
It is scheduled to shut down at 01.00 AM via the control panel.
I have a script (tested it works) to shut down the server should the control panel fail.
tell application "System Events"
shut down
end tell
Should this fail for some reason there is a second script that tell the computer to reboot shortly before the control panel schedule should start the server.
tell application "System Events"
restart
end tell
Yesterday it failed to execute either script. ITunes had been running and checked for updates and found one. It was installed and this resulted in the dialogue box appearing that wants you to promise not to steal the code etc. No person there to click OK so it hung and cancelled all processes.
So this stopped the shut down as well as the reboot.
The reason I have this script is as to make sure the computer has no hanging programmes or windows and shuts down and fires up on the desired time.
Anybody knows how to make it force to quit the programme?
Or better would be (and my preference too) to have it check if such windows are open and OK them before shutting down.
I know this is only a one in thousand occurrence, but it would be nice to have it not happen again, this time I was there to fix it.
Thanks.

'b4' - ?
Your problem is not with the provided instructions; but, the version of 'Script Editor', SE, you use.
I use SE, v. 2.0 (43) from a 'Panther' (MacOS X 10.3.x) installation. This application version works on PPC Macs running 'Panther' and 'Tiger' (MacOS X 10.4.x), and Intel Macs running 'Tiger' and (dog crap) 'Leopard' (MacOS X 10.5.x). At least here.
The features and (intuitive) ease of use of SE v. 2.0 are superior to its equivalents of 'Tiger' and (dog crap) 'Leopard'. Besides allowing one to view the 'Description' textarea field of a 'Run Only' script, SE v. 2.0 allows one to select all of the 'Suites' titles in the left side list, click on the right side panel, and then search for any character, word, or string - such as 'a', 'is', 'the', 'reference', 'in MHz' - anything. Try such a search with SE v. 2.1 and v. 2.2.
Try this example:
Select SEs' 'Window, Library' menu item. A window titled 'Standard Additions.asdictionary' will appear.
From the 'Library' windows' list, double click on 'StandardAdditions'.
SE v. 2.0 only - Select all of the suites of the left side panel, then click once on the right side panel.
In the search field (SE v 2.1 and v. 2.2) or search window (SE v. 2.0) enter 'in MHz', and press the <return> key. Did SE v. 2.1 or 2.2 find it? SE v. 2.0 goes right to it; even highlighting the search string result.
As an exercise - waste your time looking for 'in MHz' in SE v. 2.1 and / or v. 2.2.
Hint 01: Search for 'system'. Now you have a one (1) in four (4) chance of locating the user desired string (of 'in MHz') by viewing the text of each listed result.
Hint 02: Try searching by 'Description' - click on the search 'magnifying glass' and a popup button of choices appears - click on the 'Description' menu item. Still, unlike with SE v. 2.0, SE v. 2.1 or v. 2.2 does not actually highlight the located character, word, or string.
Ok, you finally located the line of 'in MHz'; but now - you want to see all of the commands of the related 'Suite' - how do you do it? In SE v. 2.0 you may have to scroll up a little; but, in SE v. 2.1 and v. 2.2 ...

Jython scripts fails from cmd line Error: no domain or domain template...

--------------script---------------
connect('weblogic','welcome1','t3://obi5.mnapps.state.mn.us:7101',adminServerName='AdminServer');
print 'Connecting to Domain ...'
try:
     domainCustom()
except:
     print 'Already in domainCustom'
cd('..\..')
print 'Go to biee admin domain'
cd('oracle.biee.admin')
print 'Go to coreapplication_obips1 Mbean'
cd('oracle.biee.admin:oracleInstance=EPM91TD,type=BIDomain.BIInstanceDeployment.BIComponent,biInstance=coreapplication,process=coreapplication_obis1,group=Service')
------------script end---------------------
---works fine if it start wlst and type commands
when runing "java weblogic.WLST RestartOBI.py"
-----------------------------output from command line execution--------------------------
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Error: No domain or domain template has been read.
Connecting to Domain ...
You will need to be connected to a running server to execute this command
Go to biee admin domain
Error: No domain or domain template has been read.
Go to coreapplication_obips1 Mbean
Thanks

Also, you must put the parameters of the net use command in the correct order.
C:\>net help localgroup
The syntax of this command is:
NET LOCALGROUP
[groupname [/COMMENT:"text"]] [/DOMAIN]
groupname {/ADD [/COMMENT:"text"] | /DELETE} [/DOMAIN]
groupname name [...] {/ADD | /DELETE} [/DOMAIN]
This help information tells you that you put the group name first after the words
net localgroup. As Forest brook pointed out, if the group name contains spaces, you must enclose it in quotes.
After the group name, put the name of the user or group you want to add to (or remove from) the local group. If the user or group name contains spaces, as noted, you must enclose it in quotes. After this group name, put the parameter
/ADD to add to the local group, or put /DELETE to remove.
For example, suppose you want to add the domain group FABRIKAM\Account Operators to the local Administrators group. This is the command you would enter:
C:\> net localgroup Administrators "FABRIKAM\Account Operators" /add
This command adds FABRIKAM\Account Operators to the local Administrators group.
In your specific case, it looks like the command would be:
C:\> net localgroup Administrators "XYZ\Desktop Administrator" /delete
Bill

I get this error when I create a new Script : Failed to create script

Hi everyone,
I get this error, and I'm not able to work with this programme. So, I can't have acces to adobe support directly.
Someone know what I could do for this? It seen, I have a problème with adobe server I think.

have you seen this KB article: http://support.apple.com/kb/HT1398 ?
JGG

Oracle R12 Clone failing with RC-00118 Error occurred during creation of...

Im encountering the above error message i have seen the below thread which looks like the same issue, i was wondering if someone could confirm if the clone process requires an off-line backup on the source system for the clone process to work. Currently i'm using a tape backup which runs overnight, the system is up at the time of backup.
RC-00118: Error occurred during creation of database
Thanks

thanks for quick response, its a hot backup.
the steps ive followed are
1. adpreclone on source
2. apps,db,inst directories deleted on destination. (after services have of course been shutdown)
3. oracle variables removed from path
4. backup restored from tape
5. deleted program files/oracle/inventory directory
6. on cmd window run set PERL5LIB=
followed by perl adcfgclone.pl dbTier
is there anything ive missed?

Purchasing Open Inerface Failed

Hello
We are using the purchasing opne interface in order to isnert lines into Blanket Purchase Agreements after a requisition is approved. After upgrading to 11.5.10 (from 11.5.9), the open interface fails with the following error:
"Column name: update_po_lines_flag head id 123456 line id 123456 error:error: record specified in po_lines_interface is invalid. Neither a new record in PO_Lines nor in PO_Lines_Location will be created".
I wasn't able to find the "update_po_lines_flag" anywhere in the DB (not in the upgraded one and not in the old one).
Does anyone have an idea regarding this column?
Thanks
Vanil_team

Hi Hussein - thank you for the quick reply
the case in the not is not similar to our issue. I didn't mention that when i create
a requisition with only one line, the process completes successfuly, but when trying to insert
more than one line into the inerface, the error occurs. In the po_lines_interface table - the line num is the same
for all of the requisition lines that the interface tries to insert into the PO. Myabe something in 11.5.10
prevents the interface from inserting lines with the same line_num.
Best Regards,
Vanil

Failed to Open/parse setup script.

While installing SAP GUI 6.40 I got error message " Fail to open/parse setup script. Please check if the script setup/sapsetup.xsc exist" I found that said xsc file is in the directory. Any help in this regard?
Thanks and Regards,
Anil

Hey Guys,
I solved the problem. If u encounter this problem, remove the C drive sharing ( drive where the setup file is located) and run the installation in a normal way. To my mind system get confused between C:/ and C$/...
Thanks and Regards
Anil

ICal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed on alert.

iCal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed.

Calendar (not called iCal anymore) does not include that capability any longer, apparently. What you have to do now is go to Automator and create a Calendar Alert action. You can add a Run AppleScript object to the action and paste in your script there, then when you save it, it will become available as a choice in the alert menu in Calendar.

Since I upgraded my Firefox..whenever I click on a link i get this error message...Java Script Exc in ev handl: Error: Bad NPObject as private data! Then I have to click ok to get the page to open.

Since I upgraded my firefox..I get this box most of the time when I click on a link to go to another page...
Java Script
Exc in ev handl: Error: Bad NPObject as private data! Then I have to click ok to get the page to open.

That issue can be caused by the McAfee Site Advisor extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

When opening FF I'm getting a script error "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://tavgp/content/libs/include.js:301"

This started happening after an automatic update to FF. I stop the script and FF opens. I've also lost the Roboform toolbar.

http://www.roboform.com/support/news 
Install Roboform v7.5.0 for Firefox 7 compatibility.
That script message is related to an AVG add-on, or an add-on which is using code from an AVG add-on. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes Disable the add-on that is causing that error until it is fixed by whoever created that add-on.

RECEIVING OPEN INTERFACE TABLE의 STRUCK RECORDS 정보 취합 SCRIPT

제품 : MFG_PO
작성날짜 : 2005-01-27
RECEIVING OPEN INTERFACE TABLE의 STRUCK RECORDS 정보 취합 SCRIPT
=================================================================
PURPOSE
RCV_TRANSACTIONS_INTERFACE table에 있는 struck receipt records의 정보를
취합하여, struck 원인 및 해결에 도움을 줄 수 있다.
(Oracle Purchasing - Version: 11.5.2 to 11.5.9)
Explanation
Receiving Open Interface Tables에 걸려 있는 receipt struck의 source
document의 추가 정보를 어떻게 취합할 수 있을것인가?
(RCV_TRANSACTIONS_INTERFACE)
Source document는 아래 중 하나가 될 수 있다.
* Purchase Order
* Return Material Authorization (RMA)
* Internal Requisition
아래에 소개하는 scripts는 interface tables에 많은 수의 records가 있을때,
많은 수의 records의 정보를 한 번에 취합하길 원할때 사용하면 유용하다.
만약 interface tables에 단지 몇 개의 records만 있다면 Note: 171257.1
- Oracle Procurement (Purchasing)/iProcurement Diagnostic Tests 에 소개
되어져 있는 적당한 diagnostic script를 이용하는편이 낫다.
Example
1.Error가 발생한 Purchase Order receipts의 추가 정보를 취합하는 script:
SELECT SUBSTR(POH.SEGMENT1,1,10) "PO Number",
POR.RELEASE_NUM "Release Num",
POL.LINE_NUM "Line Num",
RTI.INTERFACE_TRANSACTION_ID "Intf Trx Id",
RTI.TRANSACTION_DATE "Trx Date",
RTI.PROCESSING_MODE_CODE "Proc Mode",
RTI.TRANSACTION_STATUS_CODE "Trx Status",
RTI.PROCESSING_STATUS_CODE "Proc Status",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message",
POH.ORG_ID "Op Unit Id",
RTI.PO_HEADER_ID "PO Hdr Id",
RTI.PO_RELEASE_ID "Rel Id",
RTI.PO_LINE_ID "PO Line Id",
RTI.PO_LINE_LOCATION_ID "Line Loc Id",
RTI.QUANTITY "Intf Qty",
POLL.QUANTITY "Order Qty",
POLL.QUANTITY_RECEIVED "Qty recvd",
POD.QUANTITY_DELIVERED "Qty Delv",
NVL(POLL.CLOSED_CODE,'OPEN') "Closed Code",
OOD.ORGANIZATION_CODE "To Inv Org",
RTI.DESTINATION_TYPE_CODE "Dest Type",
RTI.TRANSACTION_TYPE "Intf Trx Type",
NVL(POLL.QTY_RCV_EXCEPTION_CODE,'NONE') "Qty Exception",
POLL.QTY_RCV_TOLERANCE "Qty Tolerance",
POLL.RECEIVE_CLOSE_TOLERANCE "Receipt Tolerance"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
PO_HEADERS_ALL POH,
PO_RELEASES_ALL POR,
PO_LINES_ALL POL,
PO_LINE_LOCATIONS_ALL POLL,
ORG_ORGANIZATION_DEFINITIONS OOD,
PO_DISTRIBUTIONS_ALL POD,
PO_INTERFACE_ERRORS PIE
WHERE POH.PO_HEADER_ID = RTI.PO_HEADER_ID
AND POR.PO_RELEASE_ID(+) = RTI.PO_RELEASE_ID
AND POL.PO_LINE_ID = RTI.PO_LINE_ID
AND OOD.ORGANIZATION_ID(+) = RTI.TO_ORGANIZATION_ID
AND POLL.LINE_LOCATION_ID = RTI.PO_LINE_LOCATION_ID
AND POD.LINE_LOCATION_ID = POLL.LINE_LOCATION_ID
AND RTI.INTERFACE_TRANSACTION_ID = PIE.INTERFACE_TRANSACTION_ID(+);
2.Error가 발생한 RMA receipts의 추가 정보를 취합하는 script:
SELECT RTI.INTERFACE_TRANSACTION_ID "Interface Transaction ID",
RTI.PROCESSING_STATUS_CODE "Processing Status",
RTI.PROCESSING_MODE_CODE "Processing Mode",
RTI.TRANSACTION_STATUS_CODE "Transaction Status",
RTI.TRANSACTION_TYPE "Transaction Type",
RTI.TRANSACTION_DATE "Transaction Date",
RTI.OE_ORDER_HEADER_ID "Order header Id",
OOH.ORDER_NUMBER "Order Number",
OOH.ORG_ID "Oper Unit Id",
RTI.OE_ORDER_LINE_ID "Order Line Id",
OOL.INVENTORY_ITEM_ID "Order Item",
OOL.FLOW_STATUS_CODE "Line Flow Status Code",
RTI.QUANTITY "Intf Qty",
RTI.UNIT_OF_MEASURE "Intf UOM",
OOL.ORDERED_QUANTITY "Qty Ordered",
OOL.SHIPPED_QUANTITY "Qty Shipped",
OOL.FULFILLED_QUANTITY "Qty Fulfilled",
OOL.OPEN_FLAG "Open Flag",
OOL.CANCELLED_FLAG "Cancelled",
WH.ORGANIZATION_CODE||' - '||WH.ORGANIZATION_NAME
"Ship To Organization",
WH1.ORGANIZATION_CODE||' - '||WH1.ORGANIZATION_NAME
"Ship From Organization",
OOL.BOOKED_FLAG "Booked",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
OE_ORDER_LINES_ALL OOL,
OE_ORDER_HEADERS_ALL OOH,
ORG_ORGANIZATION_DEFINITIONS WH,
ORG_ORGANIZATION_DEFINITIONS WH1,
PO_INTERFACE_ERRORS PIE
WHERE OOL.HEADER_ID = RTI.OE_ORDER_HEADER_ID
AND OOL.LINE_CATEGORY_CODE = 'RETURN'
AND OOL.LINE_ID = RTI.OE_ORDER_LINE_ID
AND OOH.HEADER_ID = RTI.OE_ORDER_HEADER_ID
AND OOL.SHIP_TO_ORG_ID = WH.ORGANIZATION_ID(+)
AND OOL.SHIP_FROM_ORG_ID = WH1.ORGANIZATION_ID(+)
AND RTI.INTERFACE_TRANSACTION_ID = PIE.INTERFACE_TRANSACTION_ID(+)
ORDER BY RTI.INTERFACE_TRANSACTION_ID;
3.Error가 발생한 Internal Requisition receipts의 추가 정보를 취합하는
script:
SELECT RTI.RECEIPT_SOURCE_CODE "Receipt Source Code",
RTI.REQUISITION_LINE_ID "Intf Req Line Id",
RTI.SHIPMENT_HEADER_ID "Ship Hdr Id",
RTI.SHIPMENT_LINE_ID "Ship Line Id",
RTI.ITEM_ID "Item Id",
RTI.QUANTITY "Intf Qty",
RTI.UNIT_OF_MEASURE "UOM",
RTI.FROM_ORGANIZATION_ID "From Org Id",
RTI.TO_ORGANIZATION_ID "To Org id",
PRH.REQUISITION_HEADER_ID "Req Hdr Id",
PRH.SEGMENT1 "Req Num",
PRL.REQUISITION_LINE_ID "Req Line Id",
NVL(PRL.QUANTITY_DELIVERED,0) "Qty Delv",
NVL(PRL.QUANTITY_CANCELLED,0) "Qty Canc",
PRL.QUANTITY "Qty Ordered",
PRL.QUANTITY - (nvl(PRL.QUANTITY_CANCELLED,0) +
NVL(PRL.QUANTITY_DELIVERED,0))"Qty Remaining",
PRL.SOURCE_TYPE_CODE "Source Type",
PRH.TRANSFERRED_TO_OE_FLAG "XFR to OE Flag",
NVL(PRL.CANCEL_FLAG,'N') "Cancelled",
NVL(PRL.CLOSED_CODE,'OPEN') "Closed Code",
LIN.LINE_ID "ISO Line Id",
NVL(LIN.ORDERED_QUANTITY,0) "ISO Line Qty",
NVL(LIN.SHIPPED_QUANTITY,0) "ISO Ship Qty",
NVL(FULFILLED_QUANTITY,0) "ISO Fulfilled Qty",
NVL(LIN.CANCELLED_QUANTITY,0) "ISO Cancelled Qty",
NVL(LIN.OPEN_FLAG,'N') "ISO Line Open",
NVL(LIN.BOOKED_FLAG,'N') "ISO Line Booked",
NVL(LIN.CANCELLED_FLAG,'N') "ISO Line Cancelled",
OOH.ORDER_NUMBER "ISO Order Number",
PIE.COLUMN_NAME "Intf Column",
SUBSTR(PIE.ERROR_MESSAGE,1,75) "Error Message"
FROM RCV_TRANSACTIONS_INTERFACE RTI,
PO_REQUISITION_HEADERS_ALL PRH,
PO_REQUISITION_LINES_ALL PRL,
PO_INTERFACE_ERRORS PIE,
OE_ORDER_LINES_ALL LIN,
OE_ORDER_HEADERS_ALL OOH
WHERE PRL.REQUISITION_HEADER_ID = PRH.REQUISITION_HEADER_ID
AND RTI.REQUISITION_LINE_ID = PRL.REQUISITION_LINE_ID
AND LIN.SOURCE_DOCUMENT_ID = PRH.REQUISITION_HEADER_ID
AND LIN.SOURCE_DOCUMENT_LINE_ID = PRL.REQUISITION_LINE_ID
AND LIN.SOURCE_DOCUMENT_TYPE_ID = 10 --Internal Requisition
AND OOH.HEADER_ID = LIN.HEADER_ID
AND PIE.INTERFACE_TRANSACTION_ID(+) = RTI.INTERFACE_TRANSACTION_ID
ORDER by PRH.SEGMENT1;
Reference Documents
Note 263368.1

Any suggestion/advise please!
Thanks,
Genoo

SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28     Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0xC0024107
Source: Checking Alcon Files      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advance

Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all.

Error: Failed to load script file; java.lang.ArrayIndexOutOfBound.Exception: 3184

Script editor was working find when I last used it last week. Tried to open a script today to make some changes and now I'm getting this error message. I have uninstalled and re-installed editor, checked the compatibility mode and it wont open the script. any ideas out there what the problem could be? need some trouble shooting help.
Error:
failed to load script file: java.lang.ArrayIndexOutOfBound.Expception: 3184
Thanks
Lora

Hmmm....   I haven't seen that, but I can tell you what I would do if I were you. This is kind of drastic, but the alternative may be a workstation reimage.
Open the windows control panel, and open the add/remove programs snap in.
Uninstall the CRS editor.
Uninstall all the JRE instances you have. They may be listed as something like Java (TM) update....   or they may appear as J2SE Runtime....   Check in the J's (it's alphabetical) and uninstall all of them.
Reboot the machine.
Download and reinstall Java 1.6.0.17   (This is what's running on my workstation right now, and it works with the editor).
Reinstall the CRS editor
Reboot the machine
Try it and see if it behaves. If it doesn't, you may need to rebuild the whole thing.

Failed to open service OracleDEV102TNSListener , error 1060

Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
I have set the all the Environment variables , i run r3trans -d and the result is
C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"
Event Viewer result is
----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.
finally in SAPINST logs i could see

Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,

Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards,

Oracle Open Script - Failed to open script error

Similar Messages

Maybe you are looking for