MII performance and monitoring

Hi,
one of my productive systems is currently at revision 12.0.9 Build(23) and experiencing some performance problems. From time to time it seems like there are some background tasks which are hanging and causing alot of cpu usage. (Restarting NW seems to solve it.)
Is there any way NW or MII to find out what is hanging and what to do against it?
Kind Regards,
Christoph

it all depends if your question is with the same processor.
if we're comparing both with 2.5GHz - the Retina might seem faster because of the flash storage.
if you install a SSD in the non retina Macbook Pro - the retina version will still boot faster but once the boot up process is done. Speed will be similar between the two since the non Retina has a SSD installed.
As for the fastest SSD out there:
Kingston Hyper X - I have this in my late 2011.
Samsung 840 Pro - one of the fastest one out there.
Sandisk Extreme - was one of the fastest last year.

Similar Messages

Performance analysis and monitoring of a Forteapplication

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

Preferred tools to monitor firewalls for performance and capacity managment

What is your prefered tool for monitoring firewalls for performance and capacity managment? We have Cisco's Health and Performance Monitor but it does not provide historcal or trending information.
Thank you,
Sara

Hi,
There are a few commercial products such as:
- Cisco Prime
- Manage Engine
- Solar Winds
There are also free products available such as Cacti and OpenNMS.
Don't forget to rate all posts that are helpful.
Cheers
Sean

Performance and Stability Problem with PE9

I just upgraded my computer to a Core i5 with 8G of memory and everything is running much faster. But my NEW PE9 just run very slow. Some of the simple tasks take 10-30 second to complete. Even Windows 7 will often come out to ask if I want to wait for PE9 to wake up or kill the process. When I want to change the size of a video clip, it just doesn't work at all due to performance. It will take PE9 20-30 seconds to resize the video clip. Without some realtime feedback of the size, it is impossible to do the resizing and this is a very fundamental operation. PE9 often crash or seize up as well, I didn't have any of these problem with PE3.0. I upgraded to PE9 simply because my PE3.0 for WIndows XP is not comletely compatible with Windows 7 (some of the text displace does not show up).
Do anyone else have issue with performance and stability?

Some general comments, and reading (some for PPro, but concepts are the same)
http://forums.adobe.com/thread/416679
Some specific information that is needed...
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all programs
2 - 320G WD Win7 swap file and video projects
3 - 1T WD all video files... read and write
Make sure you have the default Windows hard drive indexing set to OFF for all hard drives and folders
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
And, finally, the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also, tuning Win7
http://www.pcworld.com/businesscenter/article/220753/windows_7_godmode_tips_tricks_tweaks. html
Temp/Cookie Cleaner http://www.mixesoft.com/
http://forums.adobe.com/thread/789809?tstart=0
Win7 Toolbar http://WindowsSecrets.com/comp/110210
More Win7 Tips http://windowssecrets.com/comp/110127
Utilities http://windowssecrets.com/comp/110106 (Startup Solutions)
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
Harm's Tools http://forums.adobe.com/thread/504907
Also http://www.tune-up.com/products/tuneup-utilities/
Also http://personal.inet.fi/business/toniarts/ecleane.htm

JTAPI performance and limits

If you are monitoring all call and terminal events for all phones via JTAPI, does it burden your CUCM since it has to respond to your app about these events -- specially when you have more than a thousand phone. Are there some guidelines about JTAPI performance and limits -- i.e maximum number of phones/JTAPI client, etc.

Please check you have enabled AXL updates on the Call Manager side:
For CUCM 4.x
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/dir_plugin/plug413.html
Do you have the CTI Manager service running on the server you're attempting to make a JTAPI Provider?
In CRS 4.x and later, it should create the JTAPI and RM JTAPI users, but it may prompt for CCM 'administrator' credentials to add the users. If you have MLA enabled, this really means the 'ccmadministrator' user or a user with similar privileges.

Setting Overrides on all relevant Rules and Monitors

Can someone please help me with the following question? I was reading the post below (I believe written by
Cameron
Fuller) detailing some best practice around overrides. It stated if you override a ‘parameter’ for one rule/monitor (e.g. let’s say a parameter
dealing with a threshold) you should override the parameter for ‘all’ rules and monitors 'that use this parameter'. More information from the post below
Make sure that an overridden parameter is set for every rule and for every monitor that uses the parameter
When you override a parameter, make sure that the parameter is configured for each rule that uses the parameter and for each monitor that uses the parameter. There may be more than
one rule or monitor that uses the particular parameter. For example, the following rules and monitors use the
Intersite Expected Max Latency parameter: Monitors
AD Replication Monitoring
Rules
AD Replication Performance Collection - Metric Replication Latency
AD Replication Performance Collection - Metric Replication Latency: Maximum
AD Replication Performance Collection - Metric Replication Latency: Minimum
AD Replication Performance Collection - Metric Replication Latency: Average
Now my question is:
How do I discovery all the rules/monitors that are using this particular ‘parameter’?
For example using either PowerShell or SQL query. If PowerShell I assume you would have to
use Get-Rule or Get-SCOMRule with the –Criteria filter. Does anyone have an example please?
As a side note I could do the following in PowerShell as one way to find all cmdlets what use the –path parameter as one of their parameters
Get-Command -CommandType cmdlet | where {$_.parameters.keys -eq "path"}
So to recap: As above if I want to set an override on ‘Intersite Expected Max Latency’
for a given rule or monitor how do I find all other rules/monitors also use ‘Intersite Expected Max Latency’
as I can override these too?
Thanks All
AAnotherUser__
AAnotherUser__

Hi,
We may use the specific word to filter out those proper rules and monitors， to filter out all monitors that which name contains latency:
get-scommonitor -name “*latency*”
Please refer to the below links to find more details about the get-scomrule and get-scommonitor command:
Get-SCOMRule
http://technet.microsoft.com/en-us/library/hh918556(v=sc.20).aspx
Get-SCOMMonitor
http://technet.microsoft.com/en-us/library/hh918469(v=sc.20).aspx
Regards,
Yan Li
Regards, Yan Li

SFDM Tool (Shop Floor Dispatching and Monitoring), Technical questions

Hi Everybody,
i am very excited to change knowledge here on the SCN.
Right now I am analyzing the SFDM Tool (Shop Floor Dispatching and Monitoring) and need some more Information, which cannot be found via Internet research. I hope someone, who is familiar with the technical details can support me with answers.
1. Master Data:
- How does the Interchange of master data (such as machine capacities in terms of time/quantities or number of available machines) work between the SFDM and the ERP System?
- Is there a permanent interface between the SFDM and the master data in the ERP System?
- If so, which of the master data are communicated?
- Are there any limitations?
- Do BAPIs (Business Application Programming Interface) play a role?
- Is any further master data maintenance necessary, if the customer wants to implement SFDM?
2. There is a backend component situated in the ERP System called "SFDM on ABAP 1.0". What is the aim of this component?
3. Does the SFDM work with algorithms? If so, why?
4. Does the SFDM consider other machines in the same production plant?
5. Does it work over HANA?
6. Any further functionalities or restrictions?

Hi
i wouldn't recommend SFDM for performance problem solving, if this is the issue you are facing.
If this is because planners are "lost" with CM25 because of problems for Production Orders selection and so-on, then try SFDM.
There is no new functionality compared to CM2x transactions within ERP.
The benefits are clearly focused on design and user-friendliness:
interactive logs
easy configuration of settings and strategy compared to CM2x TCodes
accessible details
Please keep also in mind the fact that this is working for individual capacities (cf. Rough Guide) and related constraints in terms of capacity category (only 0001 is supported).
Best regards.
Pierre-Edouard

Hardware config and componenets : raid, gpu and monitor choices

Right,
I've almost finalised my decisions about a new build I'm putting together to use cs4 design premium prgrammes (mainly photoshop, InDesign, Illustrator, fireworks and flash) and in the near future 3d Max and possibly a video editing programme.
There are some things I'm stuck with for now; Motherboard and cpu, and some things I have a few questions about: raid 0, gpu and monitor choices. I appreciate this is a long post - but any feed-back would be appreciated.
MOTHERBOARD AND CPU
The motherboard and cpu were originally intended for a gaming pc:
MSI DKA790GX Platinum Motherboard
AMD phenom x4 9950 black edition
This motherboard and cpu are far better than any other I've had at my disposal when it has come to working with adobe programmes (CS2). So although
- I will only be able to go up to 8gb of ddr2 800mhtz ram (apparently the motherbioard becomes unstable with 8 gb 1066 ddr2)
- I do not have a motherboard that takes 2 6+ core cpus
From what I've seen of reviews on these components, at the moment, I'm quite happy with what I've got for both cs4 and 3d max use.
Besides, in the last few weeks I've learnt there are other things I can do to get maximum leverage out of a build comprising these components.
HDD CHOICE FOR RAID 0
I've read Harms generic guideline for disk setup here
http://forums.adobe.com/thread/662972?start=0&tstart=0
I gather that this guide is principally for optimum running when video editing. But I also gather that the performance enhancement of raid 0 compared to no raid will be beneficial for both photoshop and 3d Max. 4 discs with 2 in raid is what I was thinking of going for.
Discs I have or am thinking of buying:
1. I have 1 160gb WD ide 8mb cache hdd WD1600AAJB
2. I have 1 500gb WD Caviar blue SATA 16 mb cache hdd (WD500AAKS)
3. For the raid I'm thinking of buying 2x 1tb Samsung SpinPoint F3 7200rpm 32mb cache drives for £45.74 each
These are obviously highly rated as raid drives in these forums and I can't find anything smallar than a 1tb version of these drives at the shop I plan to order from – or is 1tb all they come in?
1st disc for OS and programmes
When going to the trouble of setting up raid is it acceptable to use an ide disc for the OS and programmes? I ask this because the 160gb WD hdd mentioned above has hardly been used....
If the ide drive is not approved of I'm thinking of buying either
1. A 500gb Seagate Barcude 7200.12 16mb cache sata 2 drive for £29.73 or
2. A 500gb Hitachi Deskstar 7K1000.C 7200rpm 16mb cache driver for £29.30 or
3. A 160gb samsung SpinPoint 7200rpm 8mb cache drive for 24.96
I know the Seagate and Hitachi are huge drives for the principal purpose of storing the OS and programmes but they both have 16mb cache and are only a few pounds more than the 160gb Samsung drive with only 8mb cache
Or
considering I'm going for F3 spinpoint for the raid discs would it be better, in terms of compatibility between the drives, to go for a spinpoint 8mb cache for the OS and programme discs
What should be my biggest concern here – compatibility between the discs or a higher cache on the disc - or considering they are all the same speed (7200rpm) does the cache not matter that much?
2nd disc for page file, media cache
I was thinking of dedicating the 500gb WD I have for these purposes. I've read in this forum that the WD drives are not that reliable when it comes to raid arrays – apart from that they seem to have a good reputation.
3-4th discs for raid 0
My mind is pretty much made up on the Samsung SpinPoint F3's
Partitions
Because there are a huge number of gb's in this set up I'm thinking of partioning the 1st and second discs so that in addition to using them for 'the operating system and programme files' and 'page file and media cache' their second partitions can be used to backup the data stored in the raid array.
Is it good practice to partition dedicated discs in this way?
THE GPU
Due to it's reletive cheapness, wide spread use and endorsement amongst gamers and workstation users alike, first of all I was swayed towards the 480GTX and using quadro driver hacks. But I couldn't get the number of ''risk factor' forum threads concerning making a GTX think its a quadro – particularly when it comes to using 3d max - out of my head. Even without the hacks there are a high percentage of grissly stories out there concerning the 480s and 3d max compared to workstation cards and 3d max. So I've decided that because I have the budget to get a workstation card (an ATI V7800) for 'just' £134 more than a GTX480 (£424 compared to £293) then for the peace of mind of more stable drivers, when getting to grips with a complex new programme, I might as well go for it and pay that bit extra.
I've had a good look at both the ATI V7800 and the PNY QUADRO 4000.... the differences between stream versus cuda and how these cards perform when rendering 3d programmes..... I started vearing towards the V7800 when I realised that when it came to rendering it was being compared very favourably with the quadro FX5800 let a lone the much cheaper quadro 4000.... Plus with the disc set up I am now thinking of I can buy the V7800 plus all the discs talked about above for £10 less than I can find the quadro 4000 for alone.
The only thing I'm concerned about is the V7800's compatibility with the cs4 design premium suite.
This page indicates that although some of these cards were released after cs4 they are supported by it.
http://kb2.adobe.com/cps/405/kb405445.html
Would it be wrong of me to suppose that, because the new V7800 is a work station graphics card, it will be supported by cs4?
What difference will it make if it isn't supported?
Having said that the quadro 4000 isn't listed as supported on this page either....
What would be your choice between the quadro 4000 and ATI V7800?
THE MONITOR
The monitor I'm looking at the 22” Dell 2209WA eIPS..... Although older (2008 vs 2009) the slightly larger 24”Dell 2408WFP has also caught my eye due to the higher contrast ratio (1300:1 vs 1000:1) and that this increased contrast ratio means it is capable of displaying 110 percent of the NTSC gamut as opposed to 86% with the the 2209WA.
I'm familiar with monitor on the 2006 dell XPS M1710 laptop and am very impressed with colour fidelity. The 2408WFP does require more calibration tweaking by the sound of it....
Anyone any experince of either of these monitors?
I'm off to the gym for an hour or so - I'll be back in a couple of hours

My strong advice: Don't skimp on price on hard drives.
Get high MTBF RAID edition drives (e.g., Western Digital RE-series drives).
http://www.wdc.com/en/products/products.aspx?id=30
In my main workstation I currently have two 1 TB WD RE3 drives that have been spinning in a RAID 0 configuration 24/7 with ZERO problems for a year now.
I figure one wants to minimize the chance of losing one's data down the road. How much would it cost you in time, effort, and lost work to recover your data from a backup if you should lose your hard drive?
Top-end drives can fail, sure, but the MTBF numbers say that the chances are much smaller than with "cheap" drives. And the RAID edition drives have additional features, such as vibration reduction, that differentiates them from lesser drives.
Ask yourself, why would one drive be cheaper than another? Poorer quality materials? Not as much quality control?
Another bit of info: Search this forum for "quadro". It seems that these expensive video cards may be seeing more trouble with Photoshop than you might expect. Some of the less expensive cards, that may have had more OpenGL testing (e.g., to support gaming) might be better choices for use with Photoshop. Personally I prefer ATI.
-Noel

[SOLVED] systemd-udevd using 100% CPU and monitors go to sleep on boot

Hi,
Turned my PC on this morning to find an issue with the monitors going to sleep immediately after booting. The boot process is usually slim autologin to a cinnamon session. I can see as far as entering my LUKS passphrase, followed by a few additional lines, followed by blank monitors and monitors entering power saving mode.
Booting with nomodeset on the kernel command line allows me to boot to a terminal and I can login etc, but obviously X doesn't start. I'm using xf86-video-ati drivers.
When booting with KMS enabled I also have a runaway systemd-udevd process which is thrashing my processor and I'm unable to kill it (I've tried kill -9 and still it persists).
The PC was working fine when I shut it down last night. No updates have been performed since, and no configuration changes have been made. I did notice that the power management dialog in the settings failed to open though.
Any suggestions would be welcome please, as I've now lost half a day trying to get this resolved.
TIA
X.
Edit: I've also tried downgrading xserver to 1.15, xf86-video-ati and the associated dependencies with no change.
Edit2: I've also disabled slim and rebooted and the same thing happens - so I don't believe it's an issue with X but with KMS.
Edit3: Booting with acpi=off on the kernel command line also fails with the same result.
Last edited by xanthi (2014-07-30 13:55:58)

Turned out to be an issue with libdrm. Apparently I had run some updates yesterday before shutting down, but they didn't appear in pacman.log; instead I found them by looking in the pacman package cache and found:
-rw-r--r-- 1 root root 110072 Jul 29 22:59 lib32-libdrm-2.4.56-1-x86_64.pkg.tar.xz
-rw-r--r-- 1 root root 160996 Jul 29 22:55 libdrm-2.4.56-1-x86_64.pkg.tar.xz
Downgraded [lib32-]libdrm packages to 2.4.54-1, rebooted, and success.

Admin and Monitoring BPE and EQB

Hi,
I am in need of Administration of Integration Processes and Monitoring the Business Process Engine Docs.
And
How Event Queue Browser can be used ?
Pls help.
Thanks,
Ram

Hi,
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Performance of BPM
BPM Performance tuning
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Also see the below links regarding BPM
check list for BPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards
Chilla

Dreamweaver CS3 (9) maxed CPU slow performance and FTP issues.

Dreamweaver CS3 (9) maxed CPU slow performance and FTP
issues.
Never mind...I found it.
Of course I have all the firewall, worm, scanning, phishing
filtering, full time protect, and everything else turned off when I
am working on a remote/testing site however I found the Symantec
antivirus email scan being enabled (doesn't it just interact with
my email program?) was getting in the way of DW9 ftp operations,
causing some lagging that was putting DW9 into an unstable mode
during and immediately after (10 seconds) ftp operations.
The CPU still spikes to 99% during ftp functions but DW9
works even though it's likely taxed to the max but when I turn off
email scan DW9 returned to a functioning state during ftp and
remote file view. Whatever it takes huh?
PS: email scanning only never effected DW8.02
My System Info: properly configured (as in: everything works
or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
– 1.5 GB ram – Intel extreme graphics card 64 MB ram
– Apache 2.2 server – PHP 5 – MySQL 5 -
phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
GoLive - Photoshop - ImageReady – Illustrator – Acrobat
– CuteFTP – Putty SSH - blabla...)

Thanks for the response. I managed to Google the 'nobody' account and found the explanation.
As you say, I assumed the 'syslogd' process had to do with system logs. I did check the console and couldn't find anything of particular interest in the logs.
I'll continue to monitor but if anyone has any further suggestions please post.
One thing that might also have an impact... my available drive space is now down to less than 5gb (runs anywhere between 1gb and 5gb free depending on what I'm running). I know this causes problems for Parallels as it keeps moaning at me, but would it cause any problems with OSX?
Thanks again,
Tom

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

I have a G5 PPC Dual 20" Mac Displays - I want to incorporate a Mac Mini and still use my keyboard and Monitors and Switch back and forth. How do I do this?

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

SUPER user logging and Monitoring

Since SAP does not recommend using GRC Access Control to log actions performed using SUPER users such as SAP, DDIC, or other powerful id's, what tools are available? When SAP, DDIC, or other powerful super users are used in your SAP environment. Are these activities being logged? Is anyone monitoring these activities? Do you even use SUPER id's in your environment or assign access directly to your BASIS team? Have you used GRC SPM or Virsa Firefighter to manage these users? Are you using monitoring tools such as Cyber-Ark to log and monitor your BASIS team? How do you ensure your management or audit team that all activities perfomed by SAP*, DDIC or other powerful SUPER users is logged and available for review?

> Since SAP does not recommend using GRC Access Control to log actions performed using SUPER users such as SAP*, DDIC, or other powerful id's, what tools are available?
Can you reference the source where SAP says that standard super users should not be logged?
SAP also says that standard users such as DDIC and SAP* are known targets of attack vectors(DoS attacks, password brute forcing, DB vulnerabilities...) so once having locked them down (see the other responses) it would make sense to monitor them for any events.
Cheers,
Julius

Best Approach for Performance/Event Monitoring

I'm completely new to SAP and would appreciate the input of some more experienced folks.
I have been given two tasks for SAP: performance monitoring of the SAP application/associated modules (e.g. SAP Memory utilization, number of processes, etc.) and alarm event monitoring (anything that would be characterized as a error and logged).
For the performance monitoring I would like a access the metrics once every 5 minutes to keep a running history. Several things I've started to look at are the Alert Manager and perhaps a Perl API interface.
For alarm events, I assume there is some SAP module that can monitor for these and generate SNMP traps or perhaps a custom application that does log mining. As part of this I am trying to determine where error events are written to in SAP (e.g. a log file??).
If anyone has insight or can point me in the right direction, I would be very appreciative. Thanks in advance.
Ed

Dear Ed,
If Wily Introscope is configured for your Portal, which shoold be the case because SAP delivers it as with SAP Solution Manager, all metrics which oyu mention would be available.
If you are running a testing instance which is not integrated with Solution Manager, you could try the Web Administrator
http://<host>:<port>/nwa -> Availability and Performance -> Resource Monitoring
Best Regards,
Sylvia

Tooling for code analisis and monitoring

I would like to know if there is a good tool for java code analisis and monitoring, and also JVM performance monitoring.
Thanks,
arturo

I would suggest checking out VisualVM (https://visualvm.dev.java.net/). This integrates several tools that provide both >monitoring and profiling capabilities.
It seams like most of the function work only on 6.0 !! Nice Tool to work

MII performance and monitoring

Similar Messages

Maybe you are looking for