Min-Max is creating multiple requisitions

Min-max does create one requisition for each item that needs to be procured.
However, you can override this seeded functionality by writing a custom code that updates group_code field in the po_requisitions_interface_all table after the min-max run but before the Requisition Import runs.
Hope this helps,
Sandeep Gandhi

Similar Messages

Min/Max Internal Orders 1 Requisition

We are running Min/Max planning to replenish stock in an "Emergency Warehouse" organization. The requisition import kicks off internal orders to a replenishment organization. The planner in the replenishment organization would like one order for each Min/Max run. The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?

Stick wrote:
The requisition group-by default in Purchasing parameters is vendor yet we are still seeing one unique requisition for each item thus creating one unique internal sales order per item. Thoughts?In this case the requisitions will not be grouped by Vendor because the supply source is Inventoy which is creating internal requisitions and not purchasing requisition (source is Supplier/ Vendor).
It is important to know how you are importing requisitions and what value is specified for Group By parameter during import. The value you setup in Purchasing Options defaults in the Requisition Import request parameter screen, but this can be changed before submission. So it is possible in your case that requisitions are imported using a different group by than what is specified in Purchasing Options.
From the list of different group by options available (All, Buyer, Category, Item, Supplier) you can probably use 'Location' during requisition import.
Location: Group requisition lines for each delivery location on a separate requisition.
But this will not guarantee 100% success because:
- If you import requisitions with source as INV then those can include requisitions from different INV sources generated from Reorder, Kanban etc having same delivery location. In that case all those requisitions will be grouped under a single header having same location.
- there may be different users running requisition import manually and some may forget to change this group by parameter (defaulted from purchasing options) while importing Min-Max planned requisitions (again they cannot segregate Min-Max, they can just specify INV as source)
A better solution would be to use the oracle provided custom hook (po_reqimp_pkg.post_validate_user_extensions) for requisition import to populate the GROUP_CODE column in PO_REQUISITIONS_INTERFACE table. The logic inside the hook should identify the rows in the interface table generated from each run of Min-Max and populate a unique value for all those rows in the GROUP_CODE column. You need a small piece of code to be added inside the hook.
You can also use REQ_NUMBER_SEGMENT1 column in the interface table to populate an unique value for all rows you want to group together. But in this case the value you specify will become the requisition number if there are no conflicts with the requisition number rule. Both these column, when populated, have precedence over Group by parameter. 1st priority GROUP_CODE (if populated). If GROUP_CODE is not populated then it checks REQ_NUMBER_SEGMENT1. If this is also blank then it uses Group By parameter.
Thanks
Supro

Min-Max to create WIP

Hi All,
I need help on the following -
I am running Min-Max planning to create WIP jobs. I want to -
1: Default WIP Start Date to Current Date. Currently WIP completion date is defaulted to current date. This causes WIP Start Date in Past Due which is unacceptable.
2: The WIP jobs are created with status 'Released'. I want this to be defaulted to 'Unreleased'.
Appreciate help on this.
Regards,
Yash
Edited by: Yash on Feb 10, 2012 2:23 PM

Hi Sandeep,
What I found out is the profile option 'INV: Minmax Reorder Approval' governs the status.
Now we have given resolution to set this at user level.
1: Purchase Planner will have this set to 'Pre Approved'
2: WIP Planner will have this set to 'Incomplete'
Regards,
Yash

Min-Max Planning Generating Purchase Requisitions

We have been using min-max planning for a while and scheduling the min-max planning report (planning level: organization) to run every evening to generate a purchase requisition. Of late we have some items that are showing a reorder quantity but not generating a purchase requisition. We have verified the set up of those items against items that are generating a requisition and can't see a difference. What are the possible causes of items not generating a requisition when using min-max planning?
Thank you!

Make sure Item Settup has the "List price" Given.
Source is set to " Supplier"
When you are running the Min-Max Report, it should have the Parameter "ReStock" to "Yes".
Since the records has to come from the Inventory to the Purchasing Module there is possibility that Records might be there in Interface tables. Run the "requisition Import" program and see if it address your issue.
Thanks and regards,
Phani

WMS Min Max replenishment - Auto allocate and create wms task

We using Oracle WMS and want to implement Min Max planning for replenishing from bulk to pick. The Min max report creates the move order but its not allocated and we need to run the Move Order Pick Slip report to create the allocation and wms task. Is there no other way of doing this as we need to pass the move order number when running Move Order Pick Slip report and would like to automate the process.

Hi,
As you have mentioned :
Replenishment qty to 10
and the max bin qty is 40
min bin qty is 10
available stock is 40
System will still not generate any TR since your available qty is not less than min bin qty.
Reduce your available bin qty less than 10 then only it will generate TR.
Or keep min qty as 100 , Max qty as 1000 and replenishment qty as 100 and then check.
Please read the Program documentation for LP21 ( Blue icon on lp21 input screen) for calculation .
Minimum stock     =   10
Maximum stock     = 100
Replenishment qty =   40
Storage bin stock =    5
Since the storage bin stock has fallen below the minimum stock level defined in the material master, the system calculates a quantity to be supplied to this storage bin. The system attempts to increase the total quantity in the bin (5) by multiplying the replenishment quantity (40) as many times as possible to match the maximum quantity defined for the bin (100) without exceeding it. For the supply quantity, the system calculates 80 pieces (5 + 2 x 40 = 85 < 100).
Regards,
Shailesh

Formula min max planning

HI,
if we have min = 2, max = 13 and we have fix lot multiplier 5.
on hand 0.
running min max will create order qty = 15. is correct?
how settup about formula min max if we want the result for that case is 10.
so not round up but round down..
it possible??
thanks...
The pooh

Adding to Sandeep's reply there is a profile called INV: Round Reorder Quantity which will help you round UP or DOWN the restock Qty but this still OBEYS the rule that after restock you should have the max Qty in the system as supply.

Updating Price and Supplier at Requisition interface table after Min/Max

Hello,
We have requirement of updatig requisition data at interface table once Min/Max planning is completed.
We need input here like what would be the behaviour of Standard Requisition import program if we update price and supplier details at interface table after Min.Max planning and before running the Requisiton import.
Quick reponse will help us to move forward on this requirement.
Thanks
Devaraj.K

Hi,
Yes, we are using sourcing rules, so whenever i update the interface table with Price and Supplier detials after Min/Max then the Req.Import should not consider the Sourcing rules, it should create requisiton based on the values (Price and Supplier)provided at interface tanle.
Quick reponse would helpful us to move further on this,
Thanks in advance,
Devaraj.K

Vendor details for a Min Max requisitions

Hi All
When Min Max trigger some requisition interface lines, we need to get the vendor details also be populated,
What set up it need to get these. Because when I run a Min-Max planning report, I am not getting the vendor details.
What we have is we will be having a single item be with a single vendor and vendor site
Please help.

In the General planning tab for Sourcing type is it mentioned as Supplier?
Is the use ASL flag in the Purchasing tab for the item enabled?
The supplier and site details are active?
The ASL for this item is still active ? (Check in the supplier line details in the ASL form)
My funtional guy says yes to all the above quries.
And also says All ASL have the sourcing rules assigned to the assignment set that is setup on the MRP: Default Sourcing Assignment Set profile, but this scenario is only for minmax
So this issues is only for MIN-MAX.Please let me know if any thing to be done in setup to automatically get the
vendor details into requistions lines of interface table based on items.
Edited by: 834095 on Mar 14, 2011 2:59 AM

HT5114 How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's#, 1 i-pad #mine#, 1 i-pad mini #10 year old's#, and 1 I-pod touch #11 year old's). I would like to maintain pur

How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's), 1 i-pad (mine), 1 i-pad mini (10 year old's), and 1 I-pod touch (11 year old's). I would like to maintain purchase control, but would like to be able to have a separate account ID for each person. Is that possible?

Each email address can only be on one iTunes account, and all purchases are tied to the account that buys them. If you want to have separate iTunes accounts on each then you will need separate email accounts for each iTunes account

Min-Max Planning: Unable to generate requisition

Hi,
Trying to generate Internal Requisition for a Buy item in Vision Instance.
Min Max report log shows the following error:
[10-FEB-15 15:55:21] INV_Minmax_PVT.re_po: 252331: p_organization_id: 207, p_approval: 3, p_src_type: 1, p_encum_flag: N, p_customer_id: 1021, p_employee_id: 32118, p_description: Min Max Buy Item Sourced Internally, p_src_org: , p_src_subinv: , p_subinv: , p_location_id: 207, p_po_org_id: 204, p_pur_revision: 2
[10-FEB-15 15:55:21] INV_Minmax_PVT.re_po: 252331: Null src type or invalid transact_flag, order_flag or purch_flag
[10-FEB-15 15:55:21] INV_Minmax_PVT.re_po: 252331: 1, User-Defined Exception
[10-FEB-15 15:55:21] INV_Minmax_PVT.get_reord_stat: 252331: do_restock returned message: Unable to generate requisition
[10-FEB-15 15:55:21] INV_Minmax_PVT.RUN_MIN_MAX_PLAN: 252331: Reord qty: 80, Reorder status: Unable to generate requisition, l_sortee: NEW.MISC
[10-FEB-15 15:55:21] INV_MMX_WRAPPER_PVT.EXEC_MIN_MAX($Revision: 120.6 $): 252331: INV_Minmax_PVT.run_min_max_plan returned success
Pls refer to screenshots for setups done.
Regards,
Abhishek

Hi,
One more thing you have to verify for IR-ISO at Item level.
Verify 'Internal Ordeded' attribute is checked in Order Management tab or not.
Please check out following link for more details .
http://raghuoaf.blogspot.in/2013/09/internal-requisition-setup-in-oracle.html
http://www.oracleappshub.com/oracle-purchasing/10-min-guide-for-internal-requisition-to-internal-sales-order-flow/

How to create plant wise STO from multiple requisition through Me59N

How to create plant wise STO from multiple requisition through Me59N

Due to the different supply plants the system does not know which one
to use and therefore throws the error message.
The only workaround would be to create the PO's seperatly per PR item.
Hoep this helps you

Issue with min/max when vertical axis assigned to multiple series

Hi.
I have some simple charting code that is dynamically adding LineSeries to a chart as the user requests them from the gui. As each series is added the vertical axis is assigned to the series and then data is requested and assigned to the dataProvider on the series. This is all working fine however I have found that if I add a sceond series after the first series is displayed and assign the same vertical axis to the second series then the vertical axis seems to set teh min/max based only on the second series added and ignores the first series. It doesnt set to the max of both series and so I get an incorrect max set. If I add a 3rd series the same happens again and the first and second series values seem to be ignored and the axis is set based on the last series to be added.
Is this expected? Ive tried different variations of invalidating the data/series/styles to force it to refresh but I always get the same. It does refresh but based on only the values in the last added series.
What is odd is that if I add 2 series at the same time, and assign the axis to both of them and then request data for both and update the dataProvider on both of them the axis is configured correctly based on the max value of both series.
Any workarounds to make it do the right thing if they are added dynamically? Is this a bug or a known "feature"?
Any light anyone can shed would be appreciated.
I need to have the axis assigned to the series directly as I want to be able to use multiple axes. I have found that if I set the verticalaxis on the chart rather than the series then it works fine and sets the min/max based on the combined values of both series.
The vertical axis is just a simple LinearAxis.
Any help or suggestions would be appreciated.
Im using Flex 4.1
Tks
Dan

Adobe Flex LiveDocs seemed to indicate "Using multiple series in the same chart works best when the data points are in a similar range (such as a stock price and its moving average). When the data points are in numerically very different ranges, the chart can be difficult to understand because the data is shown on a single axis. The solution to this problem is to use multiple axes, each with its own range. You can plot each data series on its own axis within the same chart using the techniques described in Using multiple axes" and that link is here:
http://livedocs.adobe.com/flex/3/html/help.html?content=charts_types_11.html
I was going to tae a look at this myself, but the code posted here is quite complex, and I suspect incomplete.
If you refer to that link and still cannot solve the issue, I would try your best to boil down your code to a more simple example still exhibiting the issue, and then post that, along with any data and the simplified main app.
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Min Max Planning Error-Unable to generate requisition

when we run min max planning in test instance for certain items we get the the below error:
“Unable to generate requisition”
Checked the source type for the items which had this error.There is no Source type set for those items even then we get this error.Any help.
Thanks

Check
Min/Max Planning Message: "Unable to Generate Requisition" [ID 113224.1]
Getting Message "Unable to generate requisition" in the Output of the Min-Max Planning Report (INVISMMX) [ID 1265297.1]
Hope this helps,
Sandeep Gandhi

Find MIN, MAX of multiple rows from multiple columns

Hello,
I need to figure out how to pull the MIN/MAX of multiple rows from multiple columns into one column. Even if some are NULL/blank.
For Example: (C: Column, R: Row, N - NULL/Blank)
C:____1____2____3____ 4____Max
R:____20___22___13____4____*22*
R:____N____N____32____14___*32*
R:____N____12____N____N____*12*
That is, it always gives a value for MIN/MAX unless there are NO values in all the rows of the columns.
So if there is one value, it will select that for the MIN/MAX, as it's the smallest/biggest since there is nothing to compare it to.
Here is my current code:
CASE WHEN COLUMN 1 < COLUMN 2 THEN COLUMN 2 ELSE COLUMN 1 END

Hi Thank you for your feedback, unfortunately, I just found out that EVALUATE Function is disabled in our environment for security reasons, so the only other way I've discovered is this:
The problem is that none of the conditions in the case statement are met--so the column is set to null. You can add a WHEN statement (section 2 below) to catch the nulls. There are five cases to consider:
Case 1: begin insp > bad order
Case 2: begin insp < bad order
Case 3: bad order only (begin insp is NULL)
Case 4: begin insp only (bad order is NULL)
Case 5: both begin insp is NULL and bad order is NULL
1) If bgn-crm-insp-ob > report-bo-ob then bgn-crm-insp-ob
(Case 1)
CASE WHEN filter ("- Terminal Task Measures"."Task Reported DateTime (Local)" using "Task Detail"."Task Code" = 'bgn-crm-insp-ob') > filter ("- Terminal Task Measures"."Task Reported DateTime (Local)" using "Task Detail"."Task Code" = 'report-bo-ob') THEN filter ("- Terminal Task Measures"."Task Reported DateTime (Local)" using "Task Detail"."Task Code" = 'bgn-crm-insp-ob')
2) If report-bo-ob is NULL then bgn-crm-insp-ob
(Case 4, 5) for case 5, you will get NULL
WHEN filter ("- Terminal Task Measures"."Task Reported DateTime (Local)" using "Task Detail"."Task Code" = 'report-bo-ob') IS NULL THEN filter ("- Terminal Task Measures"."Task Reported DateTime (Local)" using "Task Detail"."Task Code" = 'bgn-crm-insp-ob')
3) Else report-bo-ob
(Cases 2, 3)
ELSE filter ("- Terminal Task Measures"."Task Reported DateTime (Local)" using "Task Detail"."Task Code" = 'report-bo-ob') END
Hopefully this works, I'll give feedback if it does, or if you have any further suggestions please submit, again, THANK YOU SO MUCH ANYWAYS!

Can I set the min/max for multiple images at once?

I have brought in my page design from photoshop and I don't want any of the images or text to resize when the web browser window is made smaller.
Is there a way to do this without setting each min & max individually?

I answered my own question in the end, I moved them to the parent background

Min-Max is creating multiple requisitions

Similar Messages

Maybe you are looking for