"Mini Bridge could not be launched because the Mini Bridge extension is not installed."
Why?
I have uninstalled and reinstalled. I have searched for an answer, no luck.
Any ideas?
Thank you!
Amy
I"m also getting this message while trying to launch mini bridge on a Mac. I went to the Library folder you noted and the mini bridge extension is not there. I have 4 extensions present: BuzzwordAccessBundle, CSREviewBundle, Knowledge, and STORY. However the PS menu item Window>Extensions, the Extensions is grayed out. Also when I click on the "CS Live" button in the upper right of PS window, nothing happens.
I havn't used mini bridge much because I use Lightroom for organization, but I know I've used it in the past and it worked, so I can't understand how it would just disappear, and why these other things would stop working.
How can I reinstall mini bridge and get the CS Live button and extensions working again?
I'm back. I installed a couple of extensions to see what would happen and the Extensions button was still grayed out. Too shorten the story; it occurred to me to check what mode PS was running in. I had switched it to 32 bit mode so some not yet updated plugins would work. I switched it to 64 bit mode and bingo, everything works now, including mini bridge, though it is still not present in the Library folder you mention.
Similar Messages
-
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
I replaced a faulty iPhone 4S with a new handset today, another iPhone 4S. I was certain to backup my previous iPhone 4S to iTunes on my PC before returning the faulty unit. The new phone was 'set up' at the Apple Store and updated to the current iOS, 7.0.4, as was the faulty unit prior to replacement. Upon connecting the new unit to iTunes to restore to the most recent restore point from earlier in the day, the following message was shown:
"iTunes could not restore iPhone because the backup was corrupt or not compatible with the iPhone that is being restored."
I've browsed other forums and have contacted the Apple Store Genius Bar, and will hear from the Lead Genius tomorrow. In the meantime, I am hoping someone may have information for me on what I may need to do in order to restore my phone as I'd anticipated doing by now. My photos, email and text messages are what is affected and have not repopulated. My music is accessable via iCloud without a problem and my contacts were kept via SIM. I regularly copy my Camera Roll from my iPhone to my computer, and most of my photos are still viewable via Apple TV/My Photo Stream however only through the photos last saved. The 348 recent photos that were on my faulty unit, and viewable in My Photo Stream were presumedly safe, but have disappeared.
I have yet to shut down or restart my computer, nor have I exited out of iTunes, for the simple reason that I'd anticipated returning home with the new handset and plug it into my computer to restore right away. I did, but that's as far as I've gotten.
Any help would be appreciated. Thank you!Had the exact same problem whilst upgrading my iphone 4 to ios5. Lost all my data.
Backed up ios 4.3 (8F190) iphone4. Upgraded to ios 5.1 (9B176), and then tried to restore.
No joy, repeated the restore attempts countless times - lost all my data
Tried again with a simulated test.
Created a new itunes account on a new PC (64-bit windows 7), latest itunes(10.6.1.7- 64 bit).
As my data is toast, I'm using the ios 5.1 phone to try to see if it was me or an apple bug, or something elsewhich caused this to happen.
After quite a few more hours at it, it looks like a bug in iTunes / ios. I would be very happy to be wrong, though.
Tried repeatedly restoring an ios 4.3 backup to 5.1 - no joy.
Happy to try again - it does restore partially (got the call register transferred, but no SMS'es or anything else).
Any ideas? -
When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?
first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox
-
I get this message when I try to download a pdf file from a website.
"C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences."
This is a new error. There used to be no problem.Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer. -
pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences. This is what I get when I preview a PDF fillable form in FF. It loads Ok w/Explorer. It is a new site being developed so there is no url. My software tech says it is a FF problem
See http://kb.mozillazine.org/The_associated_helper_application_does_not_exist
-
My iPhone 3GS could not sync calendars to the iPhone because the sync server failed to sync the iPhone. Just installed Outlook 2010. Is there a fix for this?
I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks -
At first I thought it was a broken file, but then realised it was all MP3s.
The same MP3 downloads fine in Internet Explorer.
Thanks.Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer. -
Itunes could not backup iphone because the backup was corrupt or not compatible with the iphone
I am trying to back up and sync my iphone to itunes and the above message keeps popping up and does not allow me to do it. Can anybody help me please. I do noit want to restore the iphone for i have purchased many albums since my last backup.
Thank youHere are location of your Backup folder(s):
Win7 - C:\Users\<username>\AppData\Roaming\Apple Computer\Mobile Sync\Backup
Vista - C:\Users\<username>\AppData\Roaming\Mobile Sync\Backup
Winxp- C:\Documents and Settings\<username>\Application Data\Apple Computer\Mobile Sync\Backup -
What does the message - "i phone can not used because the apple mobile device is not started " mean
what does the message -- "i phone can not be used because the apple mobile device is not started" mean
Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.
-
My wi-fi connection is good & i want restore my iphone.But a massage flash after few min-iPhone could not be activated because the activation server is temporarily unavailable." SIM is in searching mode. What i can do.?
You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
The application "FreeHand" could not be launched because of a shared librar
Suddenly I can not launch FreeHand 10
I get:
The application "FreeHand" could not be launched because of a shared library error: "5<FreeHand X><FreeHand X><PowerPlant Shared Library>"
Only thing I can think of that is different now than last time I used FH is I activated iWork Pages
The solution would be great, as would tips on how/where I can go discover the solution without having to ask someone to help me - can't figure out how to get mac's help to point me to solution
I have repaired permissions
thanksHi, Robert.
Here is some general advice on troubleshooting shared library errors. In your case, I suspect points 1 and 2 below apply as it looks like the shared library error in this case is citing only Freehand-related components (a check on the Adobe site indicates the PowerPlant Shared Library is part of Freehand).
A shared library error, in general terms, implies a missing, corrupted, or incompatible application or operating system framework. Details on frameworks and shared libraries (heavy technical reading) can be found in the "Frameworks" section of the "Software Development Overview" chapter of the Apple Developer Connection document Mac OS X Technology Overview, and the Framework Programming Guide.
Causes for shared library errors include:
• The affected application has been corrupted and must be reinstalled.
• The affected application is incompatible with the version of Mac OS X you are using, or depends upon another application or operating system component which is either corrupted or incompatible with the affected application.
• Running incompatible versions of two applications with interdependent shared libraries.
• Disk directory or permission corruption.
• Corrupted operating system installation.
To resolve shared library errors:
1. As a start, perform a general checkup by running the Procedure in my Resolving Disk, Permission, and Cache Corruption FAQ. Directory corruption can result in a shared library being seen as "missing."
2. If the problem persists, and only one application is affected, uninstall, then reinstall the affected application. See my "Uninstalling applications" FAQ for important advice on uninstalling software.
3. Assure that the version of Mac OS X you are using is compatible with the system requirements of the affected application. The system requirements for an application can usually be determined by consulting either its documentation, the developer's Web site, or by contacting the developer.
4. Assure you are running either the latest versions or compatible versions — as specified in the system requirements of the affected application — of other applications, if any, cited in error messages concerning the shared library error. Error messages concerning the shared library error may be displayed in alert dialogs or may appear in Console logs. In particular, check these of these Console logs for specific messages citiing the shared library error and the affected application. Applications cited in the error message, other than the affected application, indicate that the affected application depends upon a shared library provided by these other applications.• Assure you are running the correct, compatible versions of any applications, other than the affected applicaiton, cited in the error messages.
• Reinstall any of the applications, other than the affected application, cited in the shared library error message.For example, the shared library error messageThe application "application_name" could not be launched because of a shared library error: "<<applicationname><Apple;Carbon;Multimedia><CFMPrivQuickTime>could imply that the installed version of QuickTime may either be corrupted or incompatible with the affected application due to the presence of CFMPriv_QuickTime in the message.
5. If the problem persists, or the shared library in question is part of the operating system, reinstall Mac OS X using the Archive and Install process. See my "General advice on performing an Archive and Install" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Help!!! Application Launch Failure the application "word" could not be launched because of a shared library error "<microsoftword><><><>"
Anyone know? APPRECIATE IT IF YOU DO!!I installed Palm Desktop 4.2.1 Rev A for Mac and am getting the same error: The application "HotSync Manager" could not be launched because of a shared library error: "<HotSync Manager><HotSync Manager><HotSyncLib.PPC><SetConfigureConduitCallBack>". I also then get an Unexpected error #-10810 message. I haven't even tried one sync yet. I tried running the suggested fix to this posting, but it didn't work either.
Any help would be greatly appreciated.
Thanks.
Post relates to: Palm IIIxe is the PDA I would like to sync using 4.2.1
Message Edited by Youngks on 08-29-2008 05:56 PM -
The dialog appears exactly like this, "The application "Transport Monitor" could not be launched because of a shared library error: "h<__ct__16CTransportRelMacFP18OpaqueTransportRefUc>"
I tried to get this resolved by following the Solution ID: 14020. Here is the problem. There is NO "Install Utility" in any of the Palm Desktop Installer file (either on the CD or downloaded from the website).
In addition, I uninstalled Missing Sync the deleted Palm. I then re-installed Palm and Missing Sync respectively. The problem persists.
Help!
Post relates to: Treo 650 (Cingular)Ok,
I have been thrashing on this one for a while. PLEASE, PLEASE, if this helped you pass this along to other forums because there are tons of people out there with this same issue and NO USEFUL information from PALM to fix it.
The fix is easy. Basically the problem is that there is a remaining process running in FreeBSD subsystem that must be stopped in order to reinstall the hotsync/palm application correctly.
Log in as root/administrator
Go to terminal and type:
ps -ax | grep -i palm
this will show all processes that are running in the system that are part of the palm software.
note the process number (on the left) of the list.
killl nnn
i.e if the left column says 654 type "kill 654" and hit enter
now do the ps -ax again and make sure the process stopped.
This also fixes that other issue when you try to empty the trash and you get an error that says Localized.rsrc is in USE. blah , blah, blah
Now reinstall the palm software and breath a big sigh of relief. Have a beer and sync your palm.
..jeff -
Could not initialize Photoshop because the file is locked
I have the problem where you get the Could not initialize Photoshop because the file is locked, where the solution was to fix the properties in the jpg. I did that and tried the Ctrl-Alt-Shft thing too. I pressed them in time and got the message to delete the settings. When I click yes, I still get the "file locked" message. If it is the scratch disk setting problem, I can't get PS open to change it. This problem started when I was opening a locked jpg from a relative. (Now none of my previous pics will open either). Any other ideas other than these that are already listed in the forums? Thanks for any help.
Technical: Windows XP 5.1, HP7680, Photoshop CS2, 2g ram, more than enough work drives. (no Vista)
Sequence of events: 1) recd a jpg from a relative in an email and saved it to hard drive. 2) with Photoshop unopened, I rt clkd on the jpg and chose "open with CS2". 3) PS started loading and then stopped with the "file locked" msg. Clkd on OK and PS closed. 4) tried to open PS from the shortcut (and from explorer) and got same result. 5) researched the problem and then used the Ctrl-Alt-Shft approach, got the window that asks to "delete settings" and chose ok, PS closed again. 6) went to the jpg and displayed properties and saw "This file came from another computer and might be locked....", so I clicked "unblock". 7) retried step 2, then 4 with same results. 7) tried to open an old jpg with step 2 and same result (got file locked msg). 8) no longer can bring up the "delete settings" window with the the Ctrl-Alt-Shft approach as it looks like it deleted the settings the 1st time.
Any ideas???? Thanks again.Bob,
I do not know why a locked JPG would mess up PS. I could see if you always tried to launch PS, by dbl-clicking on the JPG in Windows Explorer, but not from your Desktop shortcut, or from the PS.exe file.
For the locked file, there is a freeware utility, Unlocker. I do not have a URL handy, but Google should find it for you. It has worked on some network assets, that seemed to lock up on me.
Good luck, though this might not address your PS launch issue.
Hunt
Maybe you are looking for
-
Mass change of Payment Method for Vendor
Is there any way to do mass change of Payment Method for Vendor (trx. XK02) without ABAP? Need to change 1500 vendors.
-
I'm trying to export a short clip. The clip plays on the timeline. The clip plays in the Export Settings box, both in the Source side and the Output side. But when I complete the export I get the 'Media Offline' error on the clip. The media can't be
-
Disk images suddenly will not unmount.
One of several intermittent troubles I am having on my new 24" iMac with Leopard: suddenly when using disk images none will unmount. Only launching Disk Utility and unmounting them there works. Or logging out of my account. The eject symbol next to t
-
Hi Can any one tell me.. right now our client plan to setup replicate XI server for existing Production Server .is it possible? Let me know how to manage this type of infrasture. Our idea is for this replica..if main server is going down in any case
-
Some websites claim that Javascript is not activated, but Firefox says it is.
Certain websites claim that I do not have Javascript activated, but it is activated according to Firefox settings (Tools > Options > Content). One example is the German site www. autoscout24.de; when I go there I get the message "Bitte aktivieren Sie