Mini Cooper not working with Lightning 30 pin Adaptor for iPhone5

I have a 2012 Mini Cooper with a "standard" stereo. I used to plug my iPhone 4 into the cord provided by Mini and it played my music & podcasts. Now, with the Lightning to 30 pin Adapter to connect my iPhone5, my music is now only coming out of 1 speaker and the phone information will not appear. I do not have Mini Connect. Anyone else having this issue? Any suggestions? Thanks.

That happened to me too. Check your Y-cable. Make sure the 3.5mm cable is fully connected to the auxilliary jack on your 2012 MINI Cooper. You may also want to slightly twist the cable connections in the middle box part of the Y-cable if the first solution does not work for you. Good luck!

Similar Messages

Dreamweaver respond.min.js=Not working with IE7 & IE8

Six months ago I purchased Dreamweaver CS6 to have my site more interactive, I'm new to Web development.
My computer system is Windows 7 with IE9, when testing my new site all went well, until I uploaded and learned about Internet Explorer Developer Tools, which has cross browser mode to test IE 7 & 8 versions.
Unfortunately my site shows phone view first in IE7 and IE8.
Link to my site http://www.angelsbyangels.com
I have learned that “html5shiv.googlecode.com/svn/trunk/html5.js" and "respond.min.js”
are not working properly with my site in IE 7 & 8.
I AM Grateful for your help.
mlfa

Hi mlfa,
Can you chek out the following discussion on min.js and IE8, and try Sudarshan's solution?
respond.min.js and IE8 (http://forums.adobe.com/thread/1173020).
Thanks,
Preran

My ipod 4g is disabled and my laptop has crashed.i am using a new laptop and it(laptop) is not working with the ipod in order for it to be working again(ipod). what should i do??

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also:
If you don't have access to a computer
If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.

MIcrophone on HP mini 1000 not working with Ubuntu

I have an HP mini 1000 with Ubuntu installed on it. I have tried to use the microphone, but it doesn't work... I don't know if it just because I don't have the right drivers, or that it is broken.... So I am wondering where I could find the right drivers (Or if there is a fix), or wether I should just send it in to get fixed.
Thanks.
P.S.- If you need any more information about this, just tell me.
This question was solved.
View Solution.

HP is setting up a URL now. Once I have that I'll post. It should fix most of your problems since all the Ubuntu drivers have been testeda nd qualified on the MIE image (including the mic). I was told it should be a day or two.

How do I find out which programs of mine will not work with Mountain Lion?

I recently upgraded to Lion and found that all of my Power PC based applications wouldn't work (much to my surprise, as no one at Apple told me this when I inquired about the upgrade, nor is it listed in the App Store). Had to get a whole new Microsoft Word suite - after the fact.
Now, I just got an email from Intuit saying that if I upgrade to Mountain Lion I will probably have to upgrade to the latest and greatest version of Quickbooks (unless I create a partition, which is waaay too complicated for me). How do I find out what ELSE won't work if I upgrade to Mountain Lion?
Mac OS X (10.5.8)

Here's a compatibility guide by a 3rd party. I can't attest to the accuracy.
http://roaringapps.com/apps:table/tags/_a/index_tags/_a

My sim card will not work with my Iphone but will for other Iphone's, My sim card will not work with my Iphone but will for other Iphone's

When I put my sim card in it comes up with no service. But I put it into a friends one and it started to work and recieve text. I'm not sure why it's doing this and what to do to solve it. Does anyone know?

Most likely you phone is locked to another carrier. Also, see this:
iPhone: Troubleshooting No Service

WRT54G not working with cable internet access - request for help

Good evening!
At least that's the time when I write this.
I have a PC running Vista 64-bit version.
Until yesterday, I was connected to the internet using my WRT54G and a cable modem. There was a power outage (or blackout) and I lost my internet connection. I was not home when this happened. I got home and found the circuit breaker off. Since then, I can not access the internet anymore when I use the router.
If I connect the computer to the cable model directly, I can access the internet without a problem (hence I'm able to post this).
If I connect the computer to port 1 in the router, and connect the cable modem to the internet port in the router, I am not able to connect to the internet.
I have already:
- updated the firmware to the latest version (it was already installed)
- reset the router pressing the "reset" button for 30 seconds, unplugging it, and reconnecting power still pressing the "reset" button for 30 seconds.
- power cycled the devices
- tested 3 differnet patch cables that I know are good and they work
- reset the modem via a soft-reset remote request sent from the cable operator
None of these options have helped me restore my router's connection to the internet.
I know the router is working because I can print using my wireless printer and I can see my shared drives in the other PC I have connected to it, but none of them are able to connect to the internet!
Does anyone have any additional ideas on how I can fix this, before I go out and buy a new router?
Thanks in advance!
Pablo

As you have mentioned in your previous post, that you have resetted your router and you are still able to Print from your Wireless Printer, I Feel that your Router is not getting Resetted properly, whenever you reset your router your router goes to Factory default mode, and it will change the wireless network name to "linksys" and your Network will be unsecured. Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.
Once you reconnect the power to the Linksys router, On your computer Open IE and in the address bar type (http://192.168.1.1) and hit enter, when prompted for username and password, Leave the username blank and in password type "admin" and click Ok. Below the Setup tab you will find MTU, So change it to "Manual" and change the size from 1500 to 1365 and Click on Save Settings. Then Below the Setup Tab you will find the Sub tab "MAC address Clone" click on it and "Enable" and click on "Clone your PC's MAC" and click on Save Settings. Now you can Unplug the Power from Router and Unplug the Power for Modem. Wait for 30 seconds, and 1st connect the Power to your Modem and wait till all the lights goes Stable then you can connect the power to Linksys router and once all the lights are sold. On your computer Open IE and check if you are Online.

My email forms are not working with one website, but are for my others, all hosted by the same host....

I cannot get my email forms to work for one of my live sites... They work when I published to business catalyst, now they do not. I have contacted the host and they cannot seem to see the issue, as the other sites they host for me, the forms work just fine... Please help, I am about to punch a hole through my computer...
-Travis

Whatever happened, it sounds like you need to reset your phone. As contacts and messages seem to have gone they would be lost anyway unless they were on the SD card and/or backed up using Nokia Suite.
I'd suggest you reset the phone by dialling *#7370# followed by the security code which is 12345 by default (is asked). The phone will reset and you should be able to use it again afterwards.
Let us know what happens..
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

27" TFT TV not working with my mac mini

My brand new mac mini does not work with my 27" TFT TV (D-Boss) using the DVI connection. The mac mini works fine if connected to a 17" or 20" TFT display, but the screen of my TV is black and I get the error message "out of range" (strange with digital). The TV is working with my Windows laptop (analog and digital). I really have no idea where the problem is. Somebody can help me?
Thanks
-Linus

10.9.1
This is the pop up message that I get when I try to load the set up file from the disc.
"You can’t open the application “HP Installer” because PowerPC applications are no longer supported."
Thanks for your help

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

Canon Selphys not working with Gutenprint

Is there anybody who can confirm that a Canon Selphy (any model) printer (sublimation) is really working with Guteprint drivers (comes with Snow Leopard)? Because there is reports everywhere that they are not working:
http://discussions.apple.com/thread.jspa?messageID=10078893&#10078893
http://discussions.apple.com/thread.jspa?messageID=10028860&#10028860
http://discussions.apple.com/thread.jspa?messageID=10167685&#10167685
http://discussions.apple.com/thread.jspa?messageID=10163518&#10163518
Mine is not working with Gutenprint either. I have Canon Selphy CP-740. I downloaded even the newest gutenprint drivers (5.2.4) but no.
http://gimp-print.sourceforge.net/MacOSX.php
I have the exact same symptoms as in the first three post in the first thread above: The driver reports that it's 100% ready, but nothing happens. With the updated 5.2.4 it takes the paper inside the printer and then stops there!
Of course I got it working with the original (old) Canon drivers from Canon's homepage, like some other people on those threads. But the Canon driver is not nearly as good, because there is so darn few adjustments. Gutenprint would have been much better.
So - Is there any Sephys out there actually working with Snow Leopard's Gutenprint drivers?

Hi ANinnovation!
Thanks for posting! Canon does not provide direct support for imageRUNNER series products, but your dealer will be able to help you! If you don't have a dealer, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of dealers who are in your area!

EPrint does not work with Google Apps for Business (hosted email)

I have looked up numerous posts, from back into 2011 even, and HP still has not resolved this.
HP's ePrint does not work with companies using Google Apps for Business (hosted email).
Our emails come from our domain, but from the servers/DNS of Google, so we wind up getting
the "550 5.7.1 Command Rehected" error.
This is a major issue as more and more companies (especially small business owners) are moving away
from having in-house/Exchange servers, and they are moving toward hosted systems.
You really need to find a way to stop rejecting emails coming from Google Apps hosted email.
It's been around 4 years now (looking at previous posts). Why hasn't HP found a resolution to this yet?

I have brought your issue to the attention of an appropriate team within HP.
They will likely request information from you in order to look up your case details or product serial number.
Please look for a private message from an identified HP contact.
Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

SQLDEVELOPER 2.5 and above on WinXP/Win7 does not work with OID auth ?

Hi,
I have SQLDEVELOPER 1.5 on my WinXP which works fine with database local users as well as global users(OID) authentication. But with SQLDEVELOPER 2.5 and above it throws below error with OID authentication.. local user authentication is however fine.
Status:Failure-test failed:unsupported verified type
Any idea why Sqldeveloer 2.5 and above does not work with OID auth?
Thanks for help
Sivaji

It might be to do with the oracle client version or the JDBC version. (for example v3 needs the 11i jdbc drivers and associated dlls for oci connections.

Macbook mini-DVI - DVI - HDMI not working with My 32" Vizio

Okay so my Macbook mini-DVI - DVI - HDMI is not working with My 32" Vizio. I've connected an 18 pin plus one slot DVI to HDMI cable to my 32" Vizio HDTV, this cable is connected to my macbook via a Mini-DVI to DVI cable, this one has 24 pins plus one slot on the DVI side. My Vizio display is blue, no signal, it reads. I'm wondering if the reason it's not picking up the display is the lack of pins on the DVI to HDMI or because I dont have any display options aside from screen size and color on my display menu. BTW I hit the detect display button and nothing happened.... I know I just wrote alot here but hopefully someone will read it and come to the rescue. thanks

Oops, I guess all I had to do was restart my macbook. I feel like an idiot.....all is well.

Mac mini late 2012 not working with small VGA monitor

I got a mac mini (late 2012 10.8.4 all updates installed) and it is working fine with samsung b2230 via VGA adapter. There is a small VGA monitor (PL8006 max at 1024*768) which works fine when connected to a PC.
When I connect the small VGA monitor to mac mini it is not displaying anything (monitor shows blue screen with letters VGA so I assue it is not getting any signal). Mac's resolution is set to 1024*768 with 60Hz (even tried with 800*600 without any success). Monitor is also not working with win 7 installed in mac mini using bootcamp.
Any thoughts?

i just found that when the VGA cable of the small monitor is slightly inserted into the VGA adaptor it works fine (this is not usable because there is no way to keep the pins at that level) and when the pins inserted fully / moved little it is not working. Since this happens only between these two devices can't find which one is faulty.

Mini Cooper not working with Lightning 30 pin Adaptor for iPhone5

Similar Messages

Maybe you are looking for