Mini WAS 6.20 problem with SE80 Object Navigator

I have managed just about managed ( with great difficulty ) to install MiniWAS 6.20 on a machine that previously had 6.10 on it. A strange problem ( or maybe me being stupid and missing something obvious ? ), is that in SE80 Object Navigator the middle window in the left panel that should allow you to select an Object Type and Name is blank. I have tried recompiling the program and have also re-installed 6.20 completely but still the same problem. I have used the same CDs to install it on a new PC without a previous 6.10 and it works OK on there !? Any ideas much appreciated.

Thanks, that makes sense, I will try to install/reinstall the latest GUI.
I had later problems when trying to Activate Function Modules with an error mentioning message Type X. I am thinking I need to possibly make more manual deletions from the registry of XServer related entries before installing 6.20. The XServer entries seemed more difficult to locate in the registry !? Any pointers ? I was wary at the time as I didnt know the XServer was specific to the SAP installations but I'm now thinking it is ?

Similar Messages

Problem with embedded objects

Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
                         VALUE NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
                       ) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
                         ISONR          NUMBER(5,0)
                       ) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
                         CCY        ACURRENCY_ORATYPE,
                         LO32BITS   NUMBER(10,0),
                         HI32BITS   NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
                         COUNT    NUMBER(4),
                         LANG     AENUMLANGUAGE_ORATYPE,
                         COST     AAMOUNT_ORATYPE
                       ) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF

Hi,
I have problem with embedded objects which contained embedded objects.
When I create an Object in the persistent memory and commit this object I get the following error:
ORA-22805: cannot insert NULL object into object tables or nested tables
In the constructor of my persisten object I create the embedded members in the transient memory:
ATestPersObj::ATestPersObj() : m_count(0), m_lang(NULL), m_cost(NULL) {
m_lang = new AEnumLanguage_OraType();
m_cost = new AAmount_OraType();
}Or when I dereference a reference I get this error:
ORA-00600: internal error code, arguments: [kokeicadd2], [16], [5], [], [], [], [], []
Can somebody give me a hint?
I've defined the following Type:
CREATE OR REPLACE TYPE AENUM_ORATYPE AS OBJECT (
                         VALUE NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE AENUMLANGUAGE_ORATYPE UNDER AENUM_ORATYPE (
                       ) FINAL " );
CREATE OR REPLACE TYPE ACURRENCY_ORATYPE AS OBJECT (
                         ISONR          NUMBER(5,0)
                       ) FINAL ;
CREATE OR REPLACE TYPE AAMOUNT_ORATYPE AS OBJECT (
                         CCY        ACURRENCY_ORATYPE,
                         LO32BITS   NUMBER(10,0),
                         HI32BITS   NUMBER(10,0)
                       ) NOT FINAL ;
CREATE OR REPLACE TYPE ATESTPERSOBJ AS OBJECT (
                         COUNT    NUMBER(4),
                         LANG     AENUMLANGUAGE_ORATYPE,
                         COST     AAMOUNT_ORATYPE
                       ) FINAL ;
oracle::occi::Ref<ATestPersObj> pObjR = new(c.getConnPtr(), "TTESTPERSOBJ") ATestPersObj();
pObjR->setCount(i+2001);
pObjR->setLang(AEnumLanguage(i+1));
pObjR->setCost(AAmount(ACurrency(), 2.5));
c.commit();
c.execQueryRefs("SELECT REF(a) FROM TTESTPERSOBJ a", persObjListR);
len = persObjListR.size();
{for (int i = 0; i < len; i++) {
oracle::occi::Ref<ATestPersObj> pObjR = persObjListR;
pObjR->getCount();
pObjR->getLang();
c.commit();
With kind regards
Daniel
Message was edited by:
DanielF
Message was edited by:
DanielF

Problem with shared objects synchoronization.

I encountered a small problem with shared objects.
I'm working on a program that creates chat rooms of a fixed
size of 30 users. When the 31th user comes, a new room is created.
The idea is that the client first connects to the first room
and checks if it's full by connecting to shared objects. If it is
full, connection is closed and process is reapeated on a new
instance of the application.
I use a function to connect to an instance, which takes as a
parameter a number (1 for instance room_1, 2 for room_2, etc). The
function itself creates the necessary Netconnection and
sharedObject objects.
If a room is full, Netconnections and sharedObjects are
closed and function is called again with another number.
I have no problem for connecting to the first room, but after
closing the first connection and connecting to the new room, there
seem to be some problems with the shared objects (especially,
OnSync doesn't seem to execute again after the connection to the
shared objects of the new instance).
I was wondering if you had any ideas what could cause this.
Is it the use of the same variable names for connecting at two
different shared objects?
Here is the function :
function initStreams(room) {
client_nc = new NetConnection();
client_nc.connect("rtmp://192.168.0.4/Elearning/room_"+room);
in_ns = new NetStream(client_nc);
in_ns2 = new NetStream(client_nc);
Replay_video.attachVideo(in_ns);
out_ns = new NetStream(client_nc);
out_ns2 = new NetStream(client_nc);
in_ns.play("my_recorded_stream");
users_name = SharedObject.getRemote("users_name",
_root.client_nc.uri, false);
users_name.connect(_root.client_nc);
users_language = SharedObject.getRemote("users_language",
_root.client_nc.uri, false);
users_language.connect(_root.client_nc);
users_picture = SharedObject.getRemote("users_picture",
_root.client_nc.uri, false);
users_picture.connect(_root.client_nc);
users_finger = SharedObject.getRemote("users_finger",
_root.client_nc.uri, false);
users_finger.connect(_root.client_nc);
I you need more info, I can post more of the code on the
forum.
Any help would be really appreciated

I don't see any onStatus events in the code you posted above.
If you're defining the onstatus event outside the function, that's
the problem. When you define the shared object, you also need to
define it's onStatus event handler.
Also, you really should wait for the onStatus event of the
netConnection before you connect your sharedObjects. If you try to
connect the SO before the netConnection is established, the SO will
never connect.

I have too many problems with UserKeyMD Object

Hi everybody!!!......
I've too many problems with UserKeyMD object, this don't work, I have a Application which create the DataBase structure, but when try it for create the user key on "x" field in "ABC" table (x field is present on table, is db_Alpha with 8 chars, subtype is st_None) is raised the problem.
I try to create this way the key (VB example):
Dim oUserKeysMD As SAPbobsCOM.UserKeysMD
Set oUserKeysMD = oCompany.GetBusinessObject(oUserKeys)
oUserKeysMD.TableName = sTableName
oUserKeysMD.KeyName = sKeyName
oUserKeysMD.Unique = BoYesNoEnum.tYES
oUserKeysMD.Elements.ColumnAlias = sFieldName
oUserKeysMD.Add '<- here problem is raised
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserKeysMD)
I'm work in Delphi .Net and translate the source code of my function to VB.
P.D.:this source code at least work 2 times, but does not use it until today, I do not know because no longer it works now but.
excuse my ingles is very bad
thanks
regards
Francisco Troncoso
Chile.
Message was edited by: Francisco Troncoso

Hi, I using this names for my tables, fields and keys.
the table name is:
AOTI
the fields names are:
codigo alpha editsize 8
decrip alpha editsize 40
tipo alpha editsize 1 - valid values W, C - Default Value C
grupo1 alpha editsize 1 - valid values Y, N - Default Value N
grupo2 alpha editsize 1 - valid values Y, N - Default Value N
grupo3 alpha editsize 1 - valid values Y, N - Default Value N
grupo4 alpha editsize 1 - valid values Y, N - Default Value N
grupo5 alpha editsize 1 - valid values Y, N - Default Value N
grupo6 alpha editsize 1 - valid values Y, N - Default Value N
grupo7 alpha editsize 1 - valid values Y, N - Default Value N
grupo8 alpha editsize 1 - valid values Y, N - Default Value N
all fields have subtype none and the key name is :
AOPK1
ColumnAlias is codigo, when I try to create the table, fields and key with MetaDataOperatios example I have not problems but I try to create with my application I have the error.
Regards,
Franciso.

I tried downloading a free app and it asked for my billing information and when i entered it, it says that there was a billing problem with a previoud purchase and i have to update it. I keep updating it and it wont let me verify it and i cant get apps

I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

I just recently purchased 3 songs from itunes not knowing that I had no money on my debit card (visa) left. My iphone wont let me update my apps and says that there was a billing problem with my last purchase. I dont know what I am supposed to do!

I just recently purchased 3 songs from itunes not knowing that I had no money on my debit card (visa) left. My iphone wont let me update my apps and says that there was a billing problem with my last purchase. I dont know what I am supposed to do! I dont understand why it worked in the first place when it wasn't supposed to!

There seems to be a billing problem with the iTS. I've been trying to make purchases today (Dec 9th) too and it reports either the iTS can not process payments or it says my card was declined. I even changed the payment method to Paypal (which is never declined) and still no go.
I don't think it is "you" but a problem at Apple. Some popular new apps were released recently like Logic Pro and perhaps they're getting bombarded as they did when Lion was released.
Wait a few hours and then try again.

Firefox becomes really slow then eventually unresponsive when loading a page with many hires images. Unsual high memory usage up to 2gigs just for firefox. Was never a problem with v3.6.

When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.

I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy...

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher?

I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the things that have a billing problem? I tried to put my voucher code in again but it won't let me do that.

If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account.

My ipod touch will not switch on and is no longer recognised by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.

My ipod touch will not switch on and is no longer recognized by itunes. Before this i tried to restore it as I was having some problems with it switching off and on by itself randomly.
I tried to restore it and I got error code 2009, so I closed it tried again got error code 1659, now it wont do anything and it's not recognized by my pc /itunes please help x

For the restore error messages try:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

I am having trouble with my bluetooth skipping while its playing music from my Itunes music...I thought that this was an antiquated problem with the new technology?

I am having trouble with the music from my bluetooth "skipping" on my IPhone 5. I thought that this was an antiquated problem with the new technology. It's very frustrating to purchase all of this music and expect great sound and playability and get "skipping". Any ideas on how to resolve this issue?

Does the issue occur when listening to the media using the speaker or wired headphones? If it does, the issue is with the media itself.
If it does not, it's likely a bad connection or interference.

The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

Problem with inherited Objects

Hi,
I have a problem with inherited objects inside Flex using
wsdl as the source of the object. The AS-classes are generated
inside Flex Builder 3.
Inside the wsdl I have 2 complex types:
<complexType abstract="true" name="PersistentObject">
<sequence>
<element name="id" nillable="true" type="xsd:string"/>
<element name="insertTimeStamp" nillable="true"
type="xsd:dateTime"/>
<element name="insertUsername" nillable="true"
type="xsd:string"/>
<element name="updateTimeStamp" nillable="true"
type="xsd:dateTime"/>
<element name="updateUsername" nillable="true"
type="xsd:string"/>
</sequence>
</complexType>
and
<complexType name="Contact">
<complexContent>
<extension base="tns3:PersistentObject">
<sequence>
<element name="birthday" nillable="true"
type="xsd:dateTime"/>
<element name="firstName" nillable="true"
type="xsd:string"/>
<element name="lastName" nillable="true"
type="xsd:string"/>
<element name="middleName" nillable="true"
type="xsd:string"/>
<element name="newPassword" nillable="true"
type="xsd:string"/>
<element name="password" nillable="true"
type="xsd:string"/>
<element name="title" nillable="true"
type="xsd:string"/>
<element name="username" nillable="true"
type="xsd:string"/>
</sequence>
</extension>
</complexContent>
</complexType>
The classes in actionscript seem plausable:
public class PersistentObject
* Constructor, initializes the type class
public function PersistentObject() {}
public var id:String;
public var insertTimeStamp:Date;
public var insertUsername:String;
public var updateTimeStamp:Date;
public var updateUsername:String;
and
public class Contact extends PersistentObject
* Constructor, initializes the type class
public function Contact() {}
public var birthday:Date;
public var firstName:String;
public var lastName:String;
public var middleName:String;
public var newPassword:String;
public var password:String;
public var title:String;
public var username:String;
When I want to retreive an object of type Contact, it seems
that only a couple of entries are filled. While debugging the flex
XMLDecoder, I noticed something strange. It seems, like the decoder
is expecting the result xml data to be in alphabetical order:
birthday, firstname, lastname, etc. But since the object is
inherited, the data that is actually received contains elements
from the parent class: birthday, firstname, id, inserttimestamp,
The resulting object has just birthday and firstname filled,
which is somehow wrong. This seems to be a problem inside the
parser itself. What can I do?

I am having a problem with an extended class as well.
When I step through the code, everything is going fine and the decoder (mx.rpc.xml::XMLDecoder) sees that the class is an extension and wants to get the values for the superclass first. When it gets into getApplicableValues(), it's looking for the values to be in the order of the definition which would be ok if the values collection didn't include the values from the subclass as well! It goes through the whole definition and doesn't find anything for the superclass because the values aren't where it expects them. When it pops back up to the subclass and starts to decode those values, it finds them because the definition order and values order match.
Is this a known issue? Or, am I misunderstanding something?
Thanks,
Chuck

Problem with activeX objects

hi all,
i am having a problem with activeX objects.
my activeX ( Tree View) is wrking fine with windows2000
but when i am trying the same code with XP its saying dll missing.
do these activeX depends on OS also..
plz help me.

hey Vishwas!
did you register the .dll?
do you work with vb.net?
which ServicePack do you have in Windows XP?
greetz
Matthias

I am sachin ,purchase iPad mini but I have problem with apple Id .because I don't have credit card for payment .i have debit card so pl help me

I am sachin ,purchase iPad mini but I have problem with apple Id .because I don't have credit card for payment .i have debit card so pl help me

As far as I know debit cards aren't accepted as a valid payment method. There are instructions on this page for how to create an account without giving a credit card number : http://support.apple.com/kb/HT2534
Depending upon what country that you in you might be able to buy iTunes gift cards from Apple or other stores (supermarkets, electronics stores etc) and use those to buy items - but they aren't available in all countries, and they are country-specific (they can only be used in their country of issue

Was there a problem with the last update? Every time I try to watch a video on the net it goes back to the home screen

Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Mini WAS 6.20 problem with SE80 Object Navigator

Similar Messages

Maybe you are looking for