Minidump filename and .time output does not match

Hi,
I have a few minidumps from different machines. As far as I know, the filename of the minidump indicates the date of dump creation and so does the .time command in windbg. But in my case these do not match for the same dump. THe date in .time is one day
later than the minidump filename.
Is my understanding correct about the minidump filename and .time output?
thanks
Kunal

Hi Kunal,
Can you please check if there's a difference in the date/time between the dump filename and the "Date Modified" for the dump files. You can check the "Date Modified" in windows explorer.
Hope, that'll answer your query.
(Please mark as answer if this resolves your query. Please upvote if this post is helpful.)
Regards,
Rajesh

Similar Messages

PWA site template with warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings"

SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows message in yellow "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings."
KB Article http://support.microsoft.com/kb/2749599/en-us suggests applying Windows and SharePoint updates, but does not points to a specific update. Also suggests to enable "Always follow
web settings" for affected users who are in different time zone than the server time zone, but it does not work either.
Manjeet Singh

Hi,
According to your post, my understanding is that SharePoint 2010 (SP2010 SP1+ AU CU 2011) site built with Project Web Access template shows warning "Your Local Machine Time Zone does not match your current Sharepoint Regional Settings".
Users are getting this message even after correctly specifying and changing the timezone in their Sharepoint Settings. This is a common problem across the net, but we've found a workaround
that will eliminate this problem.
Step 1: Open your Web Database in your Browser
Step 2: Click the Arrow Under the Login ID (upper right corner)
Step 3: Choose My Settings
Step 4: Click the My Regional Settings Link
Step 5: Uncheck the 'Always Follow Web Settings' check and specify your time zone.
Step 6: Click OK
For more information, you can refer to:
Warning Message about time zone difference between your computer and the regional settings
of Sha...
Thanks & Regards,
Jason Guo
Jason Guo
TechNet Community Support

Shuffle play no longer works properly and the artwork does not match after iOS5 upgrade.

When I use shuffle play, my ipod touch stops playing after one or two songs and the artwork does not match the song.

i have what sounds like the exact problem; thought it might be related to a) my recent replacement phone, or b) my recent upgrade to OS 5.0.1

KE24 and KKBC_HOE balance does not match....

Hi,
We are facing a big issues at the end of the perio 2 of 2009. Our KE24 and KKBC_HOE balance does not match. We have ccompared/hecked all our previous months balance and there it was matching accurately. But for period 2, there is a mismatch.
Could anybody pls suggest why there is a difference. Is it becuse that KE24 will show only the itmes which are settled and KKBC_HOC inclues both Settled and not settled items..
Pls help on this......

hi
as you said check whether some transcation has happend but which are not settled.

Output does not match data sheet as only 1 report was available for selecti

Output does not match data sheet as only 1 report was available for selection in hyperion planning.Can anyone help me in resolving this issues.Its very urgent.

You will need to provide much more detailed information before anybody can help.
Cheers
John
http://john-goodwin.blogspot.com/

Processor type of the file and the device does not match

We ve the following problem with Zfh 7 sp1. When trying to distribute a
application we receive the message failed. When i open the log is see the
below message.
The processor type of the file and the device does not match.
I ve searched on the message and i ve seen that it is a know error and it
should be fixed in SP1
10100578 - ERROR: Skipped installation of file on device <DEVICE(Username)
> GUID <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>. The processor type of the
file and the device does not match.?
The processortype of the device is StrongARM and also from the
applications. Also when i put it on ALL/CEF it won't distribute.
Does some other people also have this problem.

Mail,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)

Hi,
I have installed FIM CM Client on one machine and FIM CM update service on another machine. Both are windows server 2008 r2 machines.
When i try to enroll a permanent smart card for a user, its shows me the following error:-
The version of OLE on the client and server machines does not match. (Exception from HRESULT: 0x80010110)
Also there is no logging done for the particular event.
I am able to change my smart card pin and view my smart card info. through the FIM CM client.
Is there a compatibility issue of FIM CM 2010 with Windows server 2008 r2?
Thanks

Hi,
Sorry for the delay in reply.
Please try the following steps first:
Open Powershell as Administrator
Go to Start--> Run and type wbemtest.exe.
•Click Connect.
•In the namespace text box type "root" (without quotes).
•Click Connect.
•Click Enum Instances…
•In the Class Info dialog box enter Superclass Name as "__ProviderHostQuotaConfiguration" (without quotes) and press OK. Note: the Superclass name includes a double underscore at the front.
•In the Query Result window, double-click "__ProviderHostQuotaConfiguration=@"
•In the Object Editor window, double-click HandlesPerHost.
•In the Value dialog, type in 8192
•Click Save Property.
•Click Save Object.
Under properties find the property "MemoryPerHost" or any other ones you need to modify and double click it
Change the value from 512 MB which is 536870912 to 1GB which is 1073741824
Click Save Property
Click Save Object.
•Close Wbemtest.
•Restart the computer.
And if all nodes are Windows server 2012, install the following update rollup as well:
Windows RT, Windows 8, and Windows Server 2012 update rollup: August 2013
http://support.microsoft.com/KB/2862768
If you have any feedback on our support, please send to [email protected]

Music on external drive. Use I Tunes to organize. Stream to TV and home stereo through Mac Book and Apple TV. Updated to Mavericks operating system. Now Many times art does not match song or music stops playing altogether. Any ideas ?

I have music on external G drive. Use I Tunes to organize and play music. Stream it to my TV and home stereo using MacBook and Apple TV. Just updated operating system to Mavericks. Now have two issues when playing music. 1) Many times album art displayed on TV will not match song playing, and 2) Music will just stop altogether sometimes. Any ideas ?

Agreed! This bug with the ringtone delay (№4.1) is really annoying

Output does NOT match the layout in Oracle Report Developer

Good afternoon,
I am extremely frustrated. I have been designing a report that has boilerplate text that is a list of questions and possible answers. Those choices typically are "Not Answered", "Yes","No", and "Unknown". I placed a box beside each choice and place a capital X in the appropriate box, based on the results in the database. When I run the report, the text overlays text above, the grey boxes do not show and in general, the output doesn't match the layout.
Sometimes, the questions may relate to other things and there may be as many as 10 or 12 choices. Some of those choices will be exclusive (only 1 of the 10) other times, the answer would be a "Check all that apply" type of condition.
It appears to happen when a report reaches a certain level of complexity although I can't determine just where that threshold is at.
I can't seem to paste an image here to show the layout and the results.
Has anyone else experienced this? Anyone have any idea what I can do to fix this?
I've opened an SR with Oracle Support, but don't expect a quick answser.
Thanks,
Don.

DC,
EUREKA!!! It works. DC, you rock. Oracle Support is still stewing about this one. I'll update my SR to let them know. It seems a silly thing, but the "biggest" change I made was changing the 'X' from a fixed-based-font to a variable-font (was courier and I changed to Times New Roman and selected a smaller font size). Although, just for insurance, I expanded the box a tad also.
Thanks. It shouldn't be this hard, but sometimes, it is.
ps: I'm a 'DC' also, whatever that's worth...
Don.

Not able to adjust date and time - format does not permit

Hello,
I just scanned one old photo as a JPG and then imported it to Aperture 2, I renamed the file 1976-07-01_01.jpg based on the date the pic was taken. Then I tried to adjust the date and time in Aperture but got this error window:
"Unable to adjust master file
Aperture was not able to adjust the date and time of the master file "pic.jpg" because it has a format that does not permit date modification."
What next?

I am having a similar problem. The time is off by 12 hours exactly (ahead). When I touch date and time, screen goes black for less than a second and then reverts to main screen with all of the icons. I have first generation touch and just noticed this problem. All of the software is up to date. Any one know of a fix for this?

Upgrade to lion and time machine does not work

I upgraded to Lion and my WD Live network drive that I always used for wireless time machine back ups no longer works. I get the following error:
Time Machine could not complete the backup.
The network backup disk does not support the required AFP features.
What can I do to fix this?

Your network drive isn't compatible with Lion. See #C16 in Time Machine - Troubleshooting.

Resolve input/output does not match

I've used Audition for years, but I'm unable to record in the new version that I just downloaded. I get the error message that input / output measurements to not match. I've been in and out of preferences and made changes to no avail. Thank you for your help.

We need a few more details of your system. Are you on a PC or a Mac? What operating system are you using? And what audio interface?
Since you say that you have used Audition for years I assume that this means on a PC. In which case it is probably Windows that is giving you the run around with setting up the soundcard correctly for Audition. This FAQ may be of help.
http://forums.adobe.com/thread/973133?tstart=0

Output Does Not MATCH Word Document

Everything is fine till it reaches page 76 (of my 388 page document) and the phrase: District of Columbia.
The original document does not wrap District of Columbia, but the PDF file does.
I am using the PDF printer.
The problem is that District of Columbia is a bookmark linked to the table of contents. I see that during creation of the PDF file, Word goes into a mode that shows hidden text in bookmarks, etc. This makes the phase District of Columbia even longer than it normally is.
A work around I am considering is choosing an oversized page for printing, but the names are criptic and I'll have to look up each to find out which would work. I'm very stuck. I have three other programs that can make a PDF out of the document in just minutes, but the links/bookmarks don't work at all.
Creation using Acrobat (v XI) takes six hours. There are that many bookmarks in the document.
Any suggestions?

My guess is that you are looking at the DOC file with a laser printer or any other printer attached in the print menu. WORD reflows documents to be consistent with the attached printer. You are probably lucky that you made it through 75 pages before there was a problem. The 6 hours is also unreasonably long for the processing of 388 pages, unless everyone might have been a graphic. But even then, that is a huge amount of time.
You are probably using PDF Maker (create PDF menu), but you should still attach the Adobe PDF printer and go through the document before printing or using PDF Maker. Also, go through the preferences in the create PDF menu to select only those things needed. Tags are good for recreating the DOC file (but it is better to not get rid of the DOC file in the first place). The other use for tags is accessibility -- that is often needed, but you might want to try turning it off to see the results.
So, bottom line is to attach the Adobe PDF printer in the print menu and then go through the DOC file to check for the format you are concerned about and see if that duplicates what you are currently getting on p. 76. If it is the same, then you are seeing a standard process by WORD.

Qosmio X500 and HDMI output does not work automatically

Sorry for my english..
Good morning.
I have a Qosmio x500 recently that runs on Windows 8.1
Previously, when I plugged in a hdmi cable from the PC to the TV, I had ( Samsung TV ), after a beep on the PC , automatically binding and made ??the TV is lit ( if it was in standby).
I could even control the PC with the TV remote control, put a movie , pause, etc.. Super convenient!
Source indicated on the TV Anynet + Toshiba pc.
And when I commutais with the TV remote control on TV, the PC screen is lit .
Off, despite repeated attempts with at least 5 software (drivers ?) Different Toshiba certified HDMI, I do not have it and I have to manually switch to see the PC on the TV (choose HDMI source on the TV) .
HDMICtrlMan is a folder where after installation, there are:
ChangeOutput.exe
HCMSoundChanger.exe
HDMICtrlCfg.exe
HDMICtrlMan.exe
But nothing works !
I also updated the video and audio driver: gforce gts 360m
But now I hold!
And I do not know the logical progression of the computer when you plug an HDMI cable (totally depends on the graphics chip ?).
If someone has an idea or experience of this problem, thank you in advance

>The problem is that with the drivers windows 7 64 bit, HDMI worked.
The problem is that you changed to a Windows system which is NOT supported on this notebook.
Of course you can use Windows 8.1 on this Qosmio X500 model but this does not mean that all notebook features would work properly.
Windows 8.1 is completely different and many Windows 7 tools and utilities are not compatible with Win 8.1
I dont know if this will help you but the Windows 8.1 Toshiba System Driver is very important software when in comes to use Windows 8.1 on Toshiba notebooks.
Try to install this Windows 8.1 Toshiba System Driver released for Qosmio X870/875 series.
But if this will not work, I dont see any other possible solutions.
Either you will give up the Windows 8.1 and will switch back to supported Win 7 or you would use Win 8.1 but without the automatic HDMI support.

Exchange 2010 - the SMTP RCPT TO and the header does not match (Carbon Copy disappears)

Dear All I have to investigate on a weird message which is carbon copied to many people who did not receive it.
As a matter of fact the SmtpReceives log recorded ONLY one person, directly addressed. I mean one SMTP RCPT TO. And the "Message Traking Results" is wholly consistent with it (with only one STOREDRIV). [Server version 14.3 (Build 123.4)]
Unfortunately Outlook 2010 shows a rather different header; in fact three CC are reported.
Any idea how to debug it? In my opinion it just a sender fault; one rcpt to settles things once and for all!
<,MAIL From:<[email protected]> SIZE=9455 BODY=8BITMIME,
>,250 2.1.0 Sender OK,
<,RCPT To:<[email protected]>,
<,DATA,
>,354 Start mail input; end with <CRLF>.<CRLF>,
>,250 2.6.0 <[email protected]> [InternalId=556164] Queued mail for delivery,
<,QUIT,
Thanks in advance.
Here's the Outlook 2010 message property:
Received: from deliver.hol.gr (62.38.3.39) by myMailer.myDomain.it (172.20.1.46) with Microsoft SMTP Server (TLS) id 14.3.210.2; Thu, 13 Nov 2014 10:37:54 +0100
Received: from auth-smtp.hol.gr (takeit01.mail.dc.hol.net [192.168.20.71]) by deliver.hol.gr (8.12.11/8.11.6) with ESMTP id sAD9bo8a027674 (using TLSv1/SSLv3 with cipher DHE-RSA-AES256-SHA (256 bits) verified FAIL) for [email protected]>; Thu, 13 Nov
2014 11:37:50 +0200
Received: from INTERNETPC-7.technomar.gr ([194.30.250.147]) (authenticated bits=0) by auth-smtp.hol.gr (8.13.1/8.13.1) with ESMTP id sAD9bmK9009834 for <[email protected]>; Thu, 13 Nov 2014 11:37:49 +0200
From: <[email protected]>
To: <[email protected]>
Date: Thu, 13 Nov 2014 11:37:48 +0200
Subject: Fw: Re: myTitle
CC: <[email protected]>, <[email protected]>,
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-7"
Content-Transfer-Encoding: 7bit
X-Mailer: Softway Communicator Mailer, SOFTWAY LTD. Piraeus GREECE
X-Virus-Scanned: ClamAV version 0.94.2, clamav-milter version 0.94.2 on takeit01.mail.dc.hol.net
X-Virus-Status: Clean
Return-Path: [email protected]
X-MS-Exchange-Organization-AuthAs: Anonymous
X-MS-Exchange-Organization-PRD: technomar.gr
X-MS-Exchange-Organization-SenderIdResult: None
Received-SPF: None (myMailer.myDomain.local: [email protected] does not designate permitted sender hosts)
X-MS-Exchange-Organization-Antispam-Report: ContentFilterConfigBypassedSender
X-MS-Exchange-Organization-SCL: -1

I'm not sure what the question is here, so I'll see if I can go through your command sequences to figure it out. You have a user with outlook who sent a message to a single recipient with two in the CC line. In your SMTP sequence, that is the
RCPT to: [email protected] line. You have no other recipients on the To: line, so any other recipients will be in the DATA section of the message. I don't see any info in your
SMTP sequence that shows what the subject and CC lines were set to, so I'm going to assume those are not included in this information.
Now, since the To: line is covered in the RCPT To: line, and you agree that there was one recipient on that line, what question are we working on? If it's where the Cc: line recipients are, as I said, they should be in the DATA section which wasn't
included. Does that help?

Minidump filename and .time output does not match

Similar Messages

Maybe you are looking for