Minimum height div, but fluid maximum

Hi, I would like to make my web page as fluid as possible, to
allow for text increases etc...
so if I have a div, which lets say is fixed width, I would
then like that div to be no less than 300px in height, but then
allow no maximum. the only reason I am unsure on how to achieve
this is because if i'm correct, certain browsers do no allow the
use of the min-height style...
am I right? if so, any guidance on how I can achieve the same
result would be great thanks

.oO(simbull)
>Thanks, I can see how that would work: What is the actual
code to comment out
>ie code and check if its ie please?
I use something like this in the document's head:

This will be interpreted only by IE, for all other browsers
it's just a
comment. The 'lte' operator means lower-than or equal, so the
stylesheet
will only be included in IE 6 and 5, which was the first one
with
support for conditional comments. There are some other
operators
available:
http://msdn2.microsoft.com/en-us/library/ms537512.aspx
>and the html>body, what is that? don't
>think I have seen that before.....I mean I know what the
code is, but is that a
>style or...?
In CSS the '>' is a child selector (see the spec for
details). This can
be used to hide a certain rule from IE 6 and lower and some
other old
browsers, since they don't support this kind of selector.
Micha

Similar Messages

Is it possible to set a minimum height for a DIV container?

Hello fellow developers,
I wonder if it is possible to set a minimum height or a fixed height for a DIV container (P container, SPAN conrainer) like in HTML?
Thank you!

Thank you, Robin!
But is it somehow possible to reserve a portion of space in the text flow so that later I can put a movie clip over this open space?
(In HTML I would create a fixed dimension DIV element for this purpose and add its contents later.)

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

Minimum height for main window

Hi
I am having a table with datas in my main window and a seperate footer(not table footer) which has to be dispalyed at the end of the page and both with borders. My problem is that when there is few data the box of main window is not touching the box of footer. It will display as 2 seperate boxes. I have tried providing minimum height to tables. But did not helped. Please suggest me a solution.
Thanks in advance,
Regards
Sathar

Hi Sathar,
In FORM PAINTER u just join the borders of the main window and the footer.
so that i will display both joined even if the data is more aor less.
Best regards,
raam

100% height divs

Hi! I'm trying to combine edge animate content with a very simple reflow layout of 100% width divs.
The idea is to create a slideshow that will scroll each Edge Animate component fullscreen.
I was wondering if there's a way to achieve a 100% height div in edge reflow.
Thanks in advance

Liquid layouts stretch to 100% of browser WIDTH.
http://alt-web.com/CSS2-Liquid-Page.html
Height should be determined by content. Thus your layout
needs to be
flexible to handle long pages and short pages.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"c-fqgy" <[email protected]> wrote in
message
news:gcmapc$9qs$[email protected]..
> I've been working on getting my webpage content area to
be 100% of the
browsers
> size. I also want the div that is contained in that area
to expand to 100%
of
> the browsers size.
>
> I've been looking around on the web trying to follow
what others have
showed
> working examples of but so far none of them have been
working for me. I
was
> hoping I could get some assistance for why it isn't
working. Perhaps I
haven?t
> fully understood what they are explaining to me?
>
> Example Page:
>
http://www.webmasterworld.com/forum83/200.htm
>
> So far what I understand is that DIV's need a parent
container to base
their
> size off of. ie the body. You also have to tell that
parent container to
be a
> height of 100% so the div has something to work from.
>
> My parent however is a cell and I've tried attaching an
ID=length to it
and
> other parts of my document including the original way
explained in the
example,
> with body but I'm getting no changes. Which has left me
stumped.
>
> My page is located:
>
http://www3.telus.net/public/surekiss/signature.htm
>
> Please ignore the bottom scroll bar. I didn't make the
frame that is in
the
> DIV so it is too big to fit in its new containing area.
>
> Thank you for any help you can offer,
>
> Jenna
>

Table - minimum height?

Hi,
I'm creating an PDF print form for a customer and they have a layout requirement which I cannot figure out how to do.
The problem is that a table should fill the most of the page regardless of the number of lines, but when the document should be paginated, the footer should be moved to the last page. I hoped it would be as simple at the ability to set minimum height on the bodyrow, but this isn't possible.
I hope someone has a great idea how to fix this, as it's beginning to drive me crazy?
Here you can see page 1 and 2 from the customers layout description - if there is no pagination, page 1 should look like page 2.
Regards,
Stefan

I already did, but here's some more details.
The bodyrow content is wrapped in a positioned subform, where I calculate the subform height based on table height, page numbers, and the other elements on the pages.
On the initialize event on the wrapper subform I have this javascript:
var layoutheight = "174mm";
var lastpagelayoutheight = "147.79mm";
var pagecount = $layout.pageCount();
if (data.Page1.Linjer.BodyRows.HeightSpacer.Linjetabel.h > lastpagelayoutheight){
data.Page1.Linjer.BodyRows.HeightSpacer.h = ((pagecount - 1) * layoutheight) + lastpagelayoutheight;
else{
data.Page1.Linjer.BodyRows.HeightSpacer.h = lastpagelayoutheight;
Currently it needs some work done after some more thorough testing with a lot of lines. But you probably get the point.

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to set minimum height size for an empty XML Form iview

Hi,
I'm trying to configure the minimum height size of an XML Form iview without sucess. Even when there is no content to show, iview height size is around 80 pixels. When there is content the automatic configuration works fine and the iview is resized properly.
The iview has automatic size and the minimum size for automatic is with 5 pixels...
Any ideas?
Thanks,
Marcelo

Hi,
I'm trying to configure the minimum height size of an XML Form iview without sucess. Even when there is no content to show, iview height size is around 80 pixels. When there is content the automatic configuration works fine and the iview is resized properly.
The iview has automatic size and the minimum size for automatic is with 5 pixels...
Any ideas?
Thanks,
Marcelo

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

When double clicking a word with an adjacent br Firefox is reporting the endContainer of the selected range as the parent div, but when selecting with a mouse drag Firefox reports the endContainer is a text node. Is this expected behavior?

Double click on break and the end container appears to be the parent div, but if you select just break with mouse the end container is a text node. If you continue to drag your mouse past the end of break you also get the parent div. Sample html:<br />
<br />
<pre><nowiki><!doctype html>
<html>
<body>
<div id="surroundingDiv1">
Break<br/>
</div>
<p>
<a href="#" onclick="showSelectionInfo()">Show Selection Info</a>
</p>
<label for="output"></label><textarea id="output" rows="20" cols="50"></textarea>
<script>
function showSelectionInfo() {
var range = null;
var sel = window.getSelection();
if (sel.rangeCount > 0 && sel.getRangeAt(0).toString() != "") {
range = sel.getRangeAt(0);
if (range != null) {
document.getElementById("output").innerHTML =
"Text: " + range.toString() +
"\n\nendContainer - " +
"\n\tid: " + range.endContainer.id +
"\n\tnodeName: " + range.endContainer.nodeName +
"\n\tnodeValue: " + range.endContainer.nodeValue +
"\n\tnodeType: " + range.endContainer.nodeType +
"\n\nstartContainer - " +
"\n\tid: " + range.startContainer.id +
"\n\tnodeName: " + range.startContainer.nodeName +
"\n\tnodeValue: " + range.startContainer.nodeValue +
"\n\tnodeType: " + range.startContainer.nodeType;
</script>
</body>
</html></nowiki></pre>

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Setting a minimum height for a dyanmic subform

I am creating a form that is reading in a set of instructions from XML. I would like to limit the instructions to 2 per page. Is there a way I can set a minimum height for the subform, so it will at least be 1/2 the page?

Hi,
If that's the case, then you could size each field in the Design view so that each field takes up have a page. Then in the Layout tab select "expand to fit height" (should also have allowed multiple lines in the Object / Field tab).
Then when you import the XML, short instructions will appear two per page, while longer ones will flow onto following pages. If the fields are set to half a page then you should not get more than 2 on a page.
Hope that is of help,
Niall

Trying to put a background image into my div but it closes out. What gives?

I keep trying to put a background image into my div but it always closes out when I try to pick an image from the browse button and then I get the spinning colored wheel of death. I've tried it on the CSS Designer Properties section and in the Properties Box on the bottom of the layout.

Could be a memory issue. Try closing Dreamweaver and re-start your computer.
Nancy O.

Smartform table minimum height

Hi all,
Is there a way to specify the minimum height of a table in smartforms, so that if we have say 10 lines in the internal table to be displayed, and we specify 15 as a minimum height, then 5 blank lines will be printed in addition to the other 10?

Haku,
u can still achieve the requirement by having another secondary window with a template of the size of sec.window with 'N' lines, so that lines are also printed from the secondary window.
Modified steps:
1.having the table in a secondary window (fixed size) and
2.the table width should be equal to the secondary window width and
3.the table should not any have border
4.Now create a sercondary window2 of size and dimention same as the one created earlier .
5.create a template of size equal to the window ,The template will have all the borders for each lines to be printed
Window1 and window 2 will over lap each other .
Now the template with table borders(like ) will be printed from window 2 Then the table contents will be printed from window 1.
Reward if u find it Useful,
Sapsurfer

Minimum height for second facet in PanelSplitter.

I am using af:panelSplitter with vertical orientation. Is it possible to specify a minimum height for the second facet so that the facet so that the splitter cant be moved down when the second facet have certain height.
At present I can move the splitter till the bottom of the page so that the second facet disappears entirely.

Hi,
don't think there is a way to do this.
Frank

Minimum Height Won't Adjust

Hi,
I have a bunch of dead space at the bottom of my web page that I don't want. I have tried adjusting the Minimum Height in both Page Properties and Site Properties, as well as dragging the arrows at the bottom (they won't move.) Please help!
Thank you so much!

Hello
Please go to File -> Site Properties and disable "Sticky Footer" to see if that resolves the issue.
Cheers
Parikshit

Minimum height div, but fluid maximum

Similar Messages

Maybe you are looking for