Minutes and seconds form field
I need to format a field in a way that a user will enter 2 numbers separated by a comma (f.e. "20.02"), and the value will be stored as minutes and seconds (MM:SS), then I will need this value to be used in various time calculations.
I need to format a field in a way that a user will enter 2 numbers separated by a comma (f.e. "20.02"), and the value will be stored as minutes and seconds (MM:SS), then I will need this value to be used in various time calculations.
Hi les2worry,
This kind of data I use quite a lot in a couple of run and walking applications. Depending on the wanted accuracy it can be in expressed in minutes, in seconds or in milliseconds. At input users don't need to give any punctuation character, but just the
digits.
So with the second-accuracy:
Input 2002 yields: 20:02
Input 1232002 yields: 123:20:02, with no 24-hrs barrier.
For each accuracy I use two functions: Str_to_sec and Sec_to_str.
After input the inputted string is parsed over the hrs/min/sec positions, and eventually converted to seconds (handy for calculations) in the function Str_to_sec, and with Sec_to_str converted to the wished format, in my case e.g. 20:02. I usually
store the formatted result, because the display possibility is far more frequently used than the value for calculation. Using Str_to_sec of the formatted value gives the number of seconds.
Imb.
Similar Messages
-
Field with time in minutes and seconds
Dear community,
first of all, I am using Apex 3.1 on Oracle 10g, if this is necessary to know (yes I know, an old version, but given by the company I'm working for). After I've developed a few applications in Apex, thank to the forum and all the answers inside, I came to a problem that I could not solve:
I want to have a normal text field, where the user can enter a duration of an event (e.g. "3:45" or "2:30"). That duration will allways be in the format "MM:SS". No hours, no milliseconds... But how can I save the given values in the database, so in which format? A varchar would be a possibility, but I want to build a report later on, where there is a sum of the times. And how to get a sum of varchar?! But how to make it clear to Apex and Oracle DB that the users gives in a time and not a varchar? The only thing oracle offers is a date field, but I want to save a time and not a date!
Does anybody has a clue for me, cause it seems to me, that possibly I just don't know what I'm searching for, cause people must have had this problem before!?
THanks for your help!
Regards
hogeBut how to make it clear to Apex and Oracle DB that the users gives in a time and not a varchar? The only thing oracle offers is a date field, but I want to save a time and not a date!All APEX items are character strings, so implicit or explicit conversion is required when the values are stored in database columns. For the recommended <tt>INTERVAL DAY TO SECOND</tt> columns, use <tt>TO_DSINTERVAL</tt> to perform the conversion.
Use <tt>EXTRACT</tt> to get the minute and second values from the <tt>INTERVAL</tt> going in the other direction.
but I want to build a report later on, where there is a sum of the times.A user-defined aggregate function can be created to sum <tt>INTERVAL DAY TO SECOND</tt> values: here's an example.
APEX's lack of built-in support for summaries on <tt>INTERVAL</tt> types can be worked round by including the sum in the report query using a </tt>UNION</tt>:
SQL> with test_data as (
2 select
3 rownum n
4 , numtodsinterval(ceil(dbms_random.value(0, 3600)), 'SECOND') t
5 from
6 dual
7 connect
8 by rownum <= 10)
9 select
10 n
11 , t
12 , to_char(extract(minute from t))
13 || ':'
14 || to_char(extract(second from t), 'fm00') t1
15 from
16 test_data
17 union all
18 select
19 null
20 , sum_dsinterval(t)
21 , to_char(extract(hour from sum_dsinterval(t)))
22 || ':'
23 || to_char(extract(minute from sum_dsinterval(t)), 'fm00')
24 || ':'
25 || to_char(extract(second from sum_dsinterval(t)), 'fm00')
26 from
27 test_data
28 order by
29 1 nulls last
30 /
N T T1
1 +000000000 00:04:46.000000000 4:46
2 +000000000 00:07:05.000000000 7:05
3 +000000000 00:31:11.000000000 31:11
4 +000000000 00:53:16.000000000 53:16
5 +000000000 00:19:02.000000000 19:02
6 +000000000 00:57:12.000000000 57:12
7 +000000000 00:43:29.000000000 43:29
8 +000000000 00:03:11.000000000 3:11
9 +000000000 00:16:40.000000000 16:40
10 +000000000 00:20:49.000000000 20:49
+000000000 04:16:41.000000000 4:16:41A custom named column (row) report template with conditional templates can be used to layout and format such a report so that the summary row(s) are properly handled. -
I am facing a strange behavior from SharePoint:DateTime control.
I have a webpart containing couple of fields along with datetime control. If I leave this page inactive for a while and then click submit, an exception is thrown stating that "Hour, Minute, and Second parameters describe an un-representable DateTime".Hi,
According to your post, my understanding is that you got datetime control error.
The problem may be lied in the Time component. You can disable the time component and go for a date only rendering of the control by setting
DateTimeField.DateOnly = true.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/64c05363-fd7e-49bb-8239-c93ec78172b6/datetime-control-using-basefieldcontrol?forum=sharepointgeneralprevious
what’s more, you can the ULS log to see the details errors.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
How to conver this System.nanoTime() into Hours,minutes and second
I am getting my Total time with the help of this function ie System.nanoTime(). But i want to Display in the form of Hours,minutes and second.
So can any one plz tell me that how i will do this conversion.If it's less than 24 hours you can use Calendar. or SimpleDateFormat. Add the epoch time for some convenient midnight to the milliseconds value (divide nanos by 1000000).
Otherwise it's just successive division and remaindering.
Probably nanos is higher resolution than you need, milliseconds is easier. -
Acrobat XI Windows 7 - unable to (copy and) paste form fields to a different pdf.
To maintain a consistent appearance and function in the forms I create for various departments, I copy a few form fields (text, checkboxes) from an unrelated Acrobat PDF. Then I paste those fields into a different PDF document that I am making fillable.
I do this because Acrobat does not allow setting a default for certain attributes when creating form fields, i.e. an unchecked scroll option, a default font other than Helvetica (in Acrobat 8, 9, and X). Plus it is time-saving to copy and paste fields that are the same in another PDF, like name, address, phone. etc.
We just updated to Acrobat XI and Windows 7 and now I cannot paste copied fields onto a different PDF.
Using "replace pages" is not applicable as I am pasting to an entirely different form and copying form fields with the settings I use.
Is this a glitch or is something new that was not in Acrobat 8, 9, and X?
Also, question regarding this forum entry - http://forums.adobe.com/message/5638333#5638333 - which is somewhat different from my current question.
The PDF creator could not paste copied fields on other pages of the same PDF. Was this ever resolved so that copy and paste worked as it has for the last 3 versions of Acrobat?
Thanks!
JoanieGilad: You're right: when the fields are different, such as a checkbox and a text field, and you try to title them the same, Acrobat gives you a message. I received no messages, the field names are not the same or I missed one and Acrobat is no longer messaging about it.
My question is different. Acrobat XI will not let me paste any field copied from a different PDF. I've been doing that for 5 years in three different versions. Maybe Acrobat XI has a new process for that, which I could not find in Acrobat help. Maybe it's because all forms now have extended rights automatically in Acrobat XI and there is another method to copy common fields to other PDFs.
Any thoughts about the new Acrobat XI? It's different in many good ways, but different.
Thanks for your ideas. -
How can i use minutes and seconds in my job interval
Sir,
I want to use minutes and seconds in my job interval.
suppose i want to run my job on 1:15:10 AM what will be the syntax. my code is below.
Declare
jobno number;
BEGIN
DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;',trunc(SYSDATE + 1) + (1/24),'trunc(SYSDATE + 1) + (1/24)');
END;
Thanks in advance.Declare
jobno number;
BEGIN
DBMS_JOB.SUBMIT(jobno,'DEL_DEPT;','trunc(SYSDATE + 1) + 4510/86400','trunc(SYSDATE + 1) + 4510/86400');
END;
number of hours in a day = 24
number of minutes in a day = (24 * 60) = 1440
number of seconds in a day = (24 * 60 * 60) = 86400
4510 is the number of seconds in 1 hour 15 minutes and 10 seconds. -
Row 6 in this spreadsheet is the result of Row 2/Row 3 as evidenced by the formula listed while Cell Y6 selected. How can I make the values in this row appear as durations of minutes and seconds rather than 3-digit decimals? For example, rather than appearing as 9.84 I would like the value of Cell Y6 to appear as 9:50 or 9min 50sec. (obviously .84x60seconds 50 seconds). I tried changing the cell formats from "number" to "duration," but no change is made. Using the "duration" format does however work if I am manually entering the decimal value into the cell rather than allowing it to result from another caluclation within the spreadsheet. Is there a solution to this within Numbers '09? You can see why I would want the "pace" displayed in minutes and seconds. Thanks in advance!
RyanHi Ryan,
You wrote:
"The problem is that my "Distance" is a row of automatically generated values resulting from ((Row1/60)*Row 6). Changing the format of Row 1 to minutes causes row two to be expressed as a duration, which obviously it shouldn't because it is a distance. The spreadsheet has to be designed so that all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace). The rest of the cells must be automatically poulated as a result of formulas."
I'm assuming that where you say "Row 1" in this you mean "Row 2", which is labeled "Time" in the example in the OP.
In the original post, you presented a formula from cell Y6. Replacing the Header labels in that formula's cell reference with the Addresses of the referenced cells, the formula was:
Y6: =Y2/Y3
In this post, you are saying that Y6 contains entered data: "...all I have to manually input on each entry are Row 1 Values (Time) and Row 6 Values (Average Pace).
Which is correct?
Regards,
Barry -
How do I log the time in hours, minutes and seconds to a table
Hi
I'm a relatively new user of Labview. I am currently writing a program that logs the temperature of an oven and the current time to a table and graph. I am using a GPIB card to communicate with the oven. I have used the Get Date/Time string to get the time and the Decimal String to Number to convert the time to a number which I have then put into an array which goes to a table and graph. My problem at the moment is that the time is being logged in hours only. I need to log the time in hours, minutes and seconds. Can you tell me how I can do this?Hi,
I can see the setup now. The decimal string to number will only ever give the hours, since the ':' character is not part of a number, so won't translate. Use the code I attached previously to get the time as a timestamp, and then go from there.
I've made some modifications, although you'll need to alter the file save to take into account the double precision number
for the timestamp is now 3E+9 (since it's seconds since 1904!!), but since you're writing to a comma separated values (or tab deliminated) style file, this shouldn't be a problem. You could always do a textual save from the table instead.
Thanks
Sacha Emery
National Instruments (UK)
// it takes almost no time to rate an answer
Attachments:
temp time program.vi 98 KB -
How to insert degree, minute and seconds in a cell
How to insert degrees, minutes and seconds in a cell. Need operate trigonometry functions
Hi harrigorri,
Does this work for you?
Degrees
Minutes
Seconds
Decimal degrees
128
26
45
128.445833333333
Formula in E2
=B2+C2÷60+D2÷3600
Font size enlarged to show the division symbol ÷
Regards,
Ian.
Edit: 3600, not 360 -
Execution time in minutes and seconds
In the UUT Report, the Execution Time displays in seconds. How can I get that to display in minutes and seconds.
I'm just now getting to this, and I've decided to address this in the reportgen_html.seq. In the step labelled "Add Execution Time", the expression reads,
Locals.Header += "<TR><TD NOWRAP='NOWRAP'><B><LI>" + ResStr("MODEL", "RPT_HEADER_EXEC_TIME") + "</B><TD><B>" + (PropertyExists("Parameters.MainSequenceResults.TS.TotalTime") ? Str(Parameters.MainSequenceResults.TS.TotalTime, Parameters.ReportOptions.NumericFormat , 1, True) + ResStr("MODEL", "RPT_HEADER_SECONDS") : ResStr("MODEL", "RPT_NOT_APPLICABLE")) + "</B>\n"
I found the RPT_HEADER_SECONDS constant and changed it to _MINUTES and changed the string. I divided the Parameters.MainSequenceResults.TS.TotalTime by 60, and this all seems to work. The only thing that's not working is that I'm updating the Parameters.ReportOptions.NumericFormat, and no matter what I do it keeps showing me 13 decimal points.
The Parameters.ReportOptions.NumericFormat is set to %$.13f (but I've tried several variations).
I just want it to display something like 21.63 minutes. Also, what is the $ doing in that expression -
Regarding function module to convert hours to minutes and seconds to minute
hi all,
is there any function module to convert hours to minutes and seconds to minutes....if so please guided me....i hav req like this...want to convert all those to minutes[seconds and hours]....Hi,
Use FM
SD_CALC_DURATION_FROM_DATETIME
Pass paramters like
I_DATE1 16.09.2008
I_TIME1 10:33:00
I_DATE2 16.09.2008
I_TIME2 19:00:00
and you will get the result as below..
E_TDIFF 8:27
8 hours and 27 minutes...
Now u can use this values of hours and minutes to get the exact wage type values... get the details from HR module and multiply it with the hours and minute and calculate it...
Use Offsets and get the hour and minute value from E_TDIFF
Hope it will solve your problem..
Thanks & Regards,
Naresh -
Can't calculate time in Appleworks - minutes and seconds
I can calculate hours and minutes, but not minutes and seconds. I've tried using leading zeros and colons, and leaving them out. The number format is set correctly (13:59:01), but I cannot get a calculation. Very frustrating.
Have tried all the obvious things I can think of.
Anyone have an idea?Got it. Must use single leading zero, not double. I hate spreadsheets.
-
Formula for Distance/Velocity Returned in Hours, Minutes, and Seconds
I want to find the formula to calculate elapsed time in hours, minutes, and seconds when you are given the velocity and distance.
Distance(Miles)
MPH
Duration(h, min, s)
60,0
20,30
0
100,0
20,80
For an unknown reason the formula do not work for me.
Cells A2, B2, A3, and B3 are numbers.
In cell C2 I use formula : =DURATION(0,0,A2/B2)
Thanks
Carougeois -
I need help to convert hours,minutes and seconds to seconds.
Hi, I need help with the code on how to convert the hours,minutes and seconds to seconds. I don't know which formula to use so that I can get the results in total number of seconds. Thanks.
Jos ("when in doubt: parenthesize correctly")Bracist.You're more right than you'd known: last week I climbed over a safety
fence (which I wasn't supposed to do of course) to adjust the position
of an optical measurement device we installed in a huge production
machine in a factory. I stepped on some sort of hose; the end of that
hose broke loose and hit me straight in the middle of my lower jaw. My
front teeth feel wiggly now and my molars on the left of my lower jaw are
not what they used to be. This Wednesday I get that all fixed at some
dental clinic. Keep your fingers crossed because me+dentists == war.
My tongue continuously keeps on reporting craters and disaster ;-)
Jos, how's it going? Besides a possible loss of some teeth, I'm fine ;-)
My Spring/Hibernate journey continues. I'm trying out Hibernate 3.2
annotations and the Ant tools. So far, so good.Good to hear. At the moment I'm putting my teeth (sic) in that darn snmp
stuff which simply refuses to work the way I want it and besides that I'm
heavily involved in some of that SAP stuff. Spring is not in the vicinity for
me in the next couple of months sadly enough.
kind regards,
Jos -
GPS coordinates with minutes and seconds always 0
I noticed the geotagged photos from my Android phone (Samsung Galaxy S3 with Android 4.3.1 Jelly Bean) have GPS coordinates always rounded to integers in Aperture. However when viewing the photo coordinates on the phone directly before importing in Aperture, or using a non-Apple tool (such as ExifTool), precise coordinates with minutes and seconds are displayed. After some research, I conclude this is an Apple bug. It affects iPhoto and Preview.app too (probably due to same underlying code reading Exif tags).
Did you experience the same bug? What phone and firmware were used to take the picture?
For the technical record, here's the bug (which I've notified to Apple). Internally (in the binary format of Exif tags), coordinates are represented by 3 values for degrees, minutes and seconds. Each of these values is represented by a rational number encoded with 2 integers (numerator and denominator). Most cameras will set an integer in the degrees values, and fractional part in the minutes and/or seconds. This format is properly decoded by Aperture. It is however valid format to set minutes and seconds values to 0, and a non-integer value in degrees, such as 70,764,776 / 10,000,000 = 7.0764776 deg. This format is not correctly parsed by Aperture.Yosemite has fixed the issue. Coordinates are now correctly displayed.
Maybe you are looking for
-
Re size pictures in batch without using version copies?
I have been going through my catalog & find hundreds of old pictures what I should delete as they will almost certainly never be looked at or used again. If they were to be reused I could probably only need a copy that was much smaller in size. Rath
-
Running latest version on OS X and mail. What happened to the icon labeled "not junk?" Is there any way to bring it back? Thanks in advance!
-
Xml files written by scratch???
i am a new to web services and has one question to ask is that all xml files are written by just typing in text editor? is there a tool like builder or xml text creator to help to write it?
-
Repair Permissions: Always the same problem
Every time I run Disk Utility, I get the same 3 problems! Is this normal? Why can't Disk Utility repair this? Verify permissions for "Macintosh HD" Determining correct file permissions. Permissions differ on ./Applications/iTunes.app/Contents/Framewo
-
Hias anyone had their iphone 4 completely die on them? Mine won't switch on, I have tried using the power key with the home key, tried connecting it via usb cable to itunes, tried new battery- nothing has worked. The phone is just 2 yrs old this mont