MIRO M8 285 (Balance in currency $, currency type $

hello
we have some problems on our system
We use Transaction MIR7 or MIRO to enter an invoice document for planned delivery cost with reference to purchase order. In Detailes Tab, at the addition of unplanned delivery costs, at the header of the invoice, the system displays one of the following error messages, when we try to simulate or post the invoice document:
M8 285 (Balance in currency $, currency type $), M8186 (Balance is not equal to zero) or RW022 (FI/CO interface: Balance in transaction currency).
We have already filled the missing entries in table T169A,a s per note 1319322.
Do you have any ideas on what should we do to avoid this error?
Thank you very much

Hi
CAn you please copy paste entire error ,
It seems like you havent taken all the amounts in concideration
check the tax code for unplaned delivery cost and calculate tax ticked

Similar Messages

F5842- balances in currency type

Can somebody please quickly help me out.
I am entering transfer posting with transaction OASV and and the error F5842 is stopping me from carrying out the posting. It says as follows
<b>Balance in 1 currencies</b>
Message no. F5842
Diagnosis
Balances have been found in 1 currencies with the following details:
Currency type Amount Currency
30 0.01- USD
(A maximum of three differences are listed)
System Response
The prerequisite for posting a document in financial accounting is that the balances for all currency types are zero.
Procedure
This is a system error in the calling application or the FI/CO interface.
Please help quickly if you know how I can proceed.

Hi Jeyakanathan,
Thanks for fast response but the problem is I want to display whole balance of GL in currency USD.Document currency just shows me what all postings done on this GL in USD but not the whole balance.Can you help me in this?

Balance in currency USD , Currency type 10 error in MIRO

Dear Gurus,
While simulating MIRO , I got an error like "Balance in currency USD , Currency type 10" . I search SDN and get some notes and update the same too in SAP . But still the error appears as before.Please suggest.
Thanks

Dear All,
My Gr/IR account is in local currency . i.e..INR
My invoice is in usd. and I want to post the MIRO in USD . My vendor's currency is in USD. In spite of all this the system is not saving the voucher.Please suggest, what to process.

Balance of F.01 and FS10n is different, when currency type is 40

All GL Balance from F.01 and FS10N is different for year 2009 and currency type 40, But for year 2008 and currency type 40 all GL balance is match. and if currency type is 10 and 30 all GL balance is match in any year.
thanks every much, if someone help me to resolve it.

Hello,
Actually, you should get the same result.
The possible cause why you have different results can be that you didn't run the balance carry forward (f.16) for ledger ?? (currency type 40) for fiscal year 2009.
You can checl this in tables t881 and t882.|
You can run it even with year 2008 closed. There is no risk, no data is changed in 2008, only the balance carry forward is transfered to the new fiscal year 2009.
I hope it solves your issue
Best Regards,
Vanessa Barth.

Balance in currency transaction in MIRO

Hi Experts
While posting an invoice in MIRO , Error message displayed as "Balance in currency transaction"
Diagnosis
A balance has occurred in transaction currency "INR" with the following details
Exchange rate "00" amt 14.00" & crncy key "INR"
The data in the transaction crncy were trnsfered from the calling application.
System Response
Your data cannot be processed in FI
Procedure
The error is probably in the calling application
Kindly guide at the earliest
Regards
Veena Kunthe

Hello,
Make sure that you have maintained translation ratios between source and target currency, typically it is 1:1, unless it is Japanies YEN - Refer Transaction code OBBS
Make sure you have entered the exchange rates OB08
Hope this should solve your issue. If still exists, please let me know the error message number.
Regards,
Ravi

Gl balances shown in FS10n but not shown in F.01( Currency type:30)

Hi gurus,
When i run F.01,currency type :30(group currency),GL balances is not showing.But when we run FS10,the GL balances is showing in USD as well as INR.
I have maintained OB22.
Pl advise.
Regards,
Samar

Hi gurus,
Thanks for your reply.
I am maintaining group currency 30 ( USD).I have maintained in OB22.Company code currency is 10 ( INR).
In GL master(FS00),I have not ticked "only in local currency).I have kept it blank.So that the system can pick up INR as well as USD
After maintaining all these,still GL balances is not showing in F.01.Is there any t code for said issue.
Kindly advise.
Regards,
Samar

GL balances appearing in FS10n(Currency type:30),but not in F.01

Dear Gurus,
I have run report in FS10n and found GL balances are coming in USD.But when i run F.01,Currency type:30,i found that no gl balances are coming.
Pl advise.
Regards,
Samar

Hi,
Thanks for your reply.
In F.01,I put data in following areas(SAP version:4.7):
1.Chart of Accounts : CIL
2.Company Code : 6000
3.Currency type :30
4.Financial stt version: 9002
Then i am running f.01 and found no balances is coming.
Kindly advise.
Regards,
Samar

To get GL account balance in Group currency ( currency type 30 )

Hi All,
I'm Using BAPI_GL_ACC_GETPERIODBALANCES to get GL account balance for a period. But it is showing output only when the currency type is 10 (Company code currency), I need to get the output in Group currency ( currencytype 30 ). Is there any function module to get the GL account balance for a period in group currency.
Thanks & Regards,
Sabu

An example,
Select * INTO TABLE gt_FAGLFLEXT
From FAGLFLEXT
Where
     RBUKRS = companycode AND
     RACCT = GLAccount AND
     RYEAR = fiscalyear .
GL Balance in group currency of fiscal period 004 is equal
     FAGLFLEXT-KSLVT +
     FAGLFLEXT-KSL01 +
     FAGLFLEXT-KSL02 +
     FAGLFLEXT-KSL03 +
     FAGLFLEXT-KSL04
Regards,
Loan Le.

CALCLATED KF SHOWING DIFFERENT VALUES FOR DIFFERENT CURRENCY TYPES

Hi Experts
When I am executing the query( On a Multi provider) with the selection of Company code, controlling area, WBS ELEMENT, currency type I am seeing two different values (XXXX EUROS and YYYY EUROS)for a formula for total variable cost when i select two different currency types( CONTROLLING AREA AND GROUP CURRENCY)
I have two currency types called CONTROLLING AREA CURRENCY and GROUP CURRENCY(BOTH IN EUROS).
This WBS element is not having any sales document.How can I see the exact value for this WBS element in the R3 side.
Is there any possibility that the same dataelement TOTAL VARIABLE COST have different values when i execute with differnt currency types in the selection screen.
In what approach can i proceed from R3 side to the query to solve this issue. on the R3 side when i see in FB03 (settlement posting) for this WBS it is balanced. I am seeing only partial posting for this in the Query
Could any one help me to solve this.
Thanks in Advance
Best regards

Hi Rajesh,
I guess the holiday which was configured in Holiday calendar (Holi) is not declared as Paid holiday in Public Holidays-Holiday Calendar.
Goto SCAL - choose Public Holiday - change mode - look for the holiday (Holi) configured - change mode again - lookout for 'Public Holiday Class' and see whether ' 1 ' is maintained there, if not maintained, type 1 there and save it.
PS (1 - Ordinary Public Holiday....i,e paid holiday).
Now go to PT01 and generate WSR. This will sort out your issue.
If the above is not working,
I guess there are different PSA/ESG grouping for the employees and maybe their Holiday Calendar itself is different. check out whether the PSA and ESG grouping in Time Mgmt is same or different for those employees for whom the paid holiday is not getting generated and also check out the Holiday Calendar for these set of employees and try the above given solution there.
Hope this helps.
regards,
Santhosh
Edited by: Santhosh on Mar 31, 2009 11:34 AM

Currency type in COPA report

I created a form to generate a COPA report. I selected "both company code and operating concern currency types while creating the form. Now, I need to be able to give the currency type as variable to have the user print the copa report whatever currency they want to print. It's cost based COPA /
How can I get the currency type as selection option? please advise.
Thanks,
Sri

From the form's general selection, select the currency type and define as local variable.

Currency Type error when releasing billing docs to Accounting

When I am trying to release the billing documents to accounting following error is displayed :
company code ABC has currency type 31. the currency type has the currency key INR in the Fin. Accounting application. The same currency type is conveyed to fin. accounting accross the accounting interface with currency key CAD.
System is also showing the tip :
This is a system error in the calling application. Currency type 31 in company code ABC must have currency key 'CAD' when the data is transmitted.
Please let me know if I have to do anything in Tcodes SCC4 or OB22. Detailed answer will be of help.
Regards
RK

Hi Ravi,
From the discription of the error what you have given what i umderstood is that in FI documents are posted with Currency INR, while the Cur. type 31 is transferring Cur. Key CAD to FI.
Since there is a diff in the Cur the error is coming.
Try to maintain Add. local cur in OB22 and then check.
regards
JS

Currency type 10,30 and 00 need to extract data from R/3 to BI

Hi Experts,
I am working ECC6.0 version with BI 7.0,
I have a issue, when I extracting data from R/3 data source (0FI_AP_3) only currency type 10 comming but I need currency type 30 and 00 also....
when I check in data source abap code it was hard coaded with 10 currenly only,
can any help me to provide your inputs how currecy type 10, 30 and 00 also come to BI.
Regards,
Vijay

Hi Vijay,
0FI_AP_3 is Account payable -Actual line item data source, which was used for fetch actual vendor posting data.
If you are looking for planning and budgeting data then you sud go for 0FI_AP_1 / 0FI_AP_6 / 0FI_AP_7 based on your requirement.
Kindly let me know if you have any question on this.
Regards,
Ashish

Report on Purchase Order , Currency Type Wise

Hello Gurus,
If i want to display a list of purchase orders , with respect to Currency Type (for eg: INR,USD,SGD,GBP,SEK)etc , how to go abt.
Help is highly appreciated
thanks and rgds

Hi bw,
If you use one of the LO datasources, 2LIS_02_HDR for example, then it has a PO currency. If you upload PO data and have PO currency attribute in your cube then you'll be able to report on POs by their currencies. What's your problem?
Best regards,
Eugene

Change Currency Type in Controlling area

Dear Gurus,
We have the following settings in the customizing:
1 - OKKP - Currency Type 20 and Currency key "USD"and flag "Different Company Code Currency is Allowed" set;
2 - Object Currency WBS "10 Company code Currency" "BRL";
3 - OB22 - Currency Type 1st local currency "10 Company code currency -
BRL" and 2nd local currency "40 hard currency - USD";
We would like to change the Currency Type in OKKP of "20 Controlling area currency" for "40 Hard Currency" without modifying the currency key.
That impact this modification can be generate if in the Production System already exists real postings and Settlement to FI-AA?
Thanks,
Elza Silva
Message was edited by:
Elza Aparecida da Silva

SELF Solved.
Regards,
Sharvari Joshi.
Edited by: Sharvari Joshi on Aug 12, 2010 10:44 AM

Need list of POs with 1 currency type (because has 1 POItems w/ different

In the old system users would put currency type on po items. In new system, they are putting it only on PO, not the items.
I am migrating from old system to new and would like to put currency type on the PO.
1. I want to get a report of POs that have >1 currency type assigned by way of the related po items having different currency types. See how PO 249 has GBP and US... that is because there are 2 PO items on that one PO, and one has GBP and the other has US. How could I filter down to just those POs w/ > 1 currency type?
2. Also how could I find those w/ no currency type? Like POs 5 and 6 (they are not in the list).
thanks.
select distinct POID, CurrencyType from fac_import_poitems
POID                   CURRENCYTYPE
0                      US
1                      US
2                      US
3                      US
4                      US
7                      US
8                      US
9                      US
10                     US
11                     US
12                     US
13                     US
15                     US
17                     US
18                     US
19                     US
20                     US
21                     US
22                     US
23                     US
24                     US
25                     US
26                     US
41                     US
42                     US
43                     US
45                     US
46                     US
47                     US
48                     US
49                     US
51                     US
52                     US
53                     US
54                     US
55                     US
56                     US
57                     US
58                     US
59                     US
60                     US
61                     US
62                     US
63                     US
64                     US
65                     US
66                     US
67                     US
68                     US
69                     US
70                     US
71                     US
72                     US
73                     US
74                     US
75                     US
76                     US
77                     US
78                     US
79                     US
80                     US
81                     US
82                     US
83                     US
84                     US
85                     US
86                     US
89                     US
90                     US
91                     US
92                     GBP
93                     US
94                     US
95                     US
96                     US
97                     US
98                     US
99                     US
100                    US
101                    US
102                    US
103                    US
104                    US
105                    US
106                    US
107                    US
108                    US
109                    US
110                    US
111                    US
112                    US
113                    US
114                    US
116                    US
117                    US
118                    GBP
119                    EU
121                    EU
122                    EU
123                    GBP
124                    EU
125                    GBP
126                    GBP
127                    EU
128                    GBP
129                    GBP
130                    GBP
131                    EU
132                    EU
133                    EU
134                    EU
135                    GBP
136                    GBP
137                    GBP
138                    GBP
139                    US
140                    US
141                    US
144                    US
145                    US
146                    US
147                    US
149                    US
150                    US
151                    US
152                    US
154                    US
155                    US
156                    US
157                    US
158                    US
159                    US
160                    US
161                    US
162                    US
163                    US
165                    US
166                    US
167                    US
168                    US
169                    US
170                    US
171                    US
172                    US
173                    US
174                    US
175                    US
181                    US
182                    US
184                    US
187                    US
188                    US
189                    US
190                    US
191                    US
192                    US
193                    US
194                    US
195                    US
196                    US
197                    US
198                    US
199                    US
200                    US
201                    US
202                    US
203                    US
205                    US
206                    US
207                    US
208                    US
209                    US
210                    US
211                    US
212                    US
213                    US
214                    US
215                    US
216                    US
217                    US
218                    US
219                    US
220                    US
221                    US
222                    US
224                    US
225                    US
226                    US
227                    US
228                    US
229                    US
230                    US
231                    US
232                    US
233                    Euros
234                    US
235                    US
236                    US
237                    US
238                    US
239                    US
240                    US
241                    US
243                    US
244                    US
245                    GBP
247                    GBP
249                    GBP
249                    US
Oracle 9i*

OK, GOT IT. This gives me the POs w/ >1 currency type
select POs.id POID, count( distinct items.CurrencyType )
from fac_import_poitems items,
       fac_import_purchase_orders POs
where items.poid = POs.id
group by POs.id, items.poid
having count( distinct items.CurrencyType ) > 1using that as subquery, I can get the POItems in each po w/ >1 currency type and I added some more useful info on the PO as well.
select subq.id POID, subq.Description, subq.PDPerson, items.id POItemID, items.currencytype
from fac_import_poitems items,
select POs.id, POs.projectname Description, POs.requestorname PDPerson, items.POID, count( distinct items.CurrencyType )
from fac_import_poitems items,
       fac_import_purchase_orders POs
where items.poid = POs.id
group by POs.id, items.poid, pos.projectname, pos.requestorname
having count( distinct items.CurrencyType ) > 1
) subq
where subq.ID = items.poid;thank you so much Justin!!!

MIRO M8 285 (Balance in currency $, currency type $

Similar Messages

Maybe you are looking for