Mismatched ABI (not an ELF file) for -lnavhoa = Installing 10.2g Gateway

Hi All,
We have a informix system in one of our HP-UX PA_RISC system (64-bit).
We are try to installed the 10.2 Gateway for Informix to connect from Oracle to Informix.
However during the installation we encounter an error message
INFO: ld: Mismatched ABI (not an ELF file) for -lnavhoa, found /oracle/10.2.0/ga
teway/lib32//libnavhoa.a
during the compilation stage. We are not sure why the some file in /oracle/10.20/gateway/lib is link to the lib32 directory. The compliation should use 64 library. Anyone has any idea?
Below is the logfile information.
INFO: Checking installer requirements...
INFO:
INFO: Checking operating system version: must be B.11.23 or B.11.11. Actual B
.11.11
INFO: Passed
INFO:
INFO:
INFO: All installer requirements met.
INFO:
INFO:
INFO: The commandline for unzip:
INFO: /unload/Disk1/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.
0.0/1/DataFiles/\*.jar -d /tmp/OraInstall2007-09-30_11-48-13PM
INFO: The commandline for unzip:
INFO: /unload/Disk1/install/unzip -qqq ../stage/Components/oracle.swd.oui/10.2.0
.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2007-09-30_11-48-13PM
INFO: The commandline for unzip:
INFO: /unload/Disk1/install/unzip -qqq ../stage/Components/oracle.swd.oui.core/1
0.2.0.1.0/1/DataFiles/\*.jar -d /tmp/OraInstall2007-09-30_11-48-13PM
INFO:
"installActions2007-09-30_11-48-13PM.log" 5116 lines, 360353 characters
/oracle/10.2.0/gateway/tg4ifmx/`if [ -d /oracle/10.2.0/gateway/lib32 ];
then echo "lib32"; else echo "lib"
INFO: ;fi`/tg4ifmx.o \
/oracle/10.2.0/gateway/rdbms/`if [ -d /oracle/10.2.0/gateway/lib32 ]; th
en echo "lib32"; else echo "lib" ;fi`/defopt.o /oracle/10.2.0/gateway/rdbms/`i
f [ -d /oracle/10.2.0/gateway/lib32 ]; then echo "lib32"; else echo "lib" ;fi`/h
omts.o -L/oracle/10.2.0/gateway/lib32// -lnavhoa -lhsnav -lhsbase -lagtsh -lp
ls10 -lclntsh -lnls10 -lcore10 -lnls10 -lcore10 -lnls10 -lcore10 -lunls10
`cat /oracle/10.2.0/gateway/lib/sysliblist` -lm
INFO: cc: 487: warning : Possibly incorrect message catalog.
INFO: ld: Mismatched ABI (not an ELF file) for -lnavhoa, found /oracle/10.2.0/ga
teway/lib32//libnavhoa.a
Fatal error.
INFO:
Stop.
INFO: *** Error exit code 1
INFO: End output from spawned process.
INFO: ----------------------------------

glad that worked.
Why should anyone have to go through all this to install an update? I mean, looking at the large number of people having to do thing to get the 10.6.5 update to actual instal boggles the mind.

Similar Messages

  • I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

    Hello waitingone,
    please try this (all terms are translated from my German programs to my best knowledge):
    1. Did the creator of the pdf file enable the import options?
    2. See import options: choose an other visibility option for your layer.
    3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
    4. See trimming: try the different modes there. Often works: "Media".
    5. Is the pdf file (eg from Word) correctly created?
    6. Is the PDF file protected? >>> no import possible.
    7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
    Good luck!
    Hans-Günter

  • BEA-141230 Could Not locate descriptor file for System Resource: DS name

    Guys,
    When I start the Admin and Managed server ..I get below warning message.
    *<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>*
    I know that weblogic server is unable to locatie datasource1.xml file at <SOA_HOME>/user_projects/domains/base_domain/config/jdbc
    Is there any way to to get rid off from this error? I tried to delete datasource from weblogic Admin console, but get below error:
    java.lang.NullPointerException
    All changes have been activated. No restarts are necessary.
    Errors were encountered while performing this delete operation.
    Thanks,
    Ab

    Are you starting servers with the root user? make sure that using whichever user you are starting server, it has full access on MW_Home and it's sub-directories. You may consider raising a support SR.
    Regards,
    Anuj

  • Could not open Transport File for creation

    I Changed the path and copied the repository from old path to new path. While executing se38 à RSCMST TCode, we get the errors in RED(HTTP interface using fuction group).
    1.The error log check_subrc: subrc     1  instead          0
    check_subrc: Component : data error text : No such file or directory
    docGet: DOC_0                                    error
    docGet: DOC_S                          
    check_subrc: subrc     1  instead          0
    check_subrc: Component : sdata1.txt error text : No such file or directory
    docGet: DOC_S                                    error
    docGet: DOC_M                          
    check_subrc: subrc     1  instead          0
    check_subrc: Component : mabc error text : No such file or directory
    docGet: DOC_M                                    error
    docGet: DOC_L                          
    check_subrc: subrc     1  instead          0
    check_subrc: Component : ldata error text : No such file or directory
    docGet: DOC_L                                    error
    docGet: DOC_N                          
    check_subrc: subrc     1  instead          0
    check_subrc: Component : Data6 error text : No such file or directory
    docGet: DOC_N                                    error
    HTTP error: 404 (Not Found)  "G:CS_REPZHR_MASTEK046cDF6258C5DF68EAF183C4001F295A507C directory not found"
    info: mCreate DOC_0                              error
    2.Message 704: (SAPKPROTP Error: Could not open Transport File for creation.
    Thanks & Regards
    Jituda

    Hi,
    Could you plz let me know how did you fix this issue?
    BR,
    Shyam

  • Lightroom 3 does NOT support raw files for the  Canon Sureshot S95

    Have just bought the new Canon Sureshot S95
    after contacting Adobe support I am told Lightroom 3 does NOT support raw files for the
    Canon Sureshot S95.
    Come on Adobe.....please provide an update asap.

    (1) Well Boss I did what you said and used Canon DPP to convert to TIFFs. Choices are 8-bit TIFF or 16-bit TIFF - I chose 16-bit because part (90% part) of the reason for wanting to work in RAW is to keep the bit depth of teh original. On my EOS 40D it is supposedly 14 bits, which gives great scope to play with the levels & curves without seeing poster effects. If I choose 16 bit TIFF then each S95 image becomes a 70MB file, parallel to my JPEG and RAW.  Hardly a satisfactory solution.
    (I realise, however, that I don't actually know the bit depth of the S95 RAW file - anybody? ). 
    (2) SUGGESTION-  even if you are adding S95 support to the next update (which I dearly hope), be kinder to those with new cameras in general and allow LR to import JPEGs if it cannot import the RAWs (overriding if necessary the 'ignore JPEG' preference setting).  I am sure users with that preference would still prefer a JPEG than no picture at all!
    Since I discovered this compatibility problem, I switched the camera to record RAW+JPEG*. To my great irritation LR3 ignores the JPEGs even though it cannot load the RAWs.  So if I want to import from one supported camera (EOS40D) and one unsupported camera (S95) I have to keep going into preferences to switch on and off the 'ignore JPEG' function.
    JJ
    *  (this seems to be a setting that needs doing in the various different modes of the camera, by the way).

  • Gmail could not scan zip file for viruses

    I received a zip file.  MacBook Pro tries to scan for virus and I received a msg that "Gmail could not scan this file for viruses".  Does the problem lies with the zip file OR there is some software that I need to download & install before I could download the zip file?

    You are wasting your time scanning for viruses.
    I have been using Macs since 1984.
    I've worked at companies with 50+ Macs.
    I've used every Mac OS From 1.1 to 10.6.7
    I have never seen a Mac virus or known anyone that has.

  • I can not open the file .7z to instal Photoshop CS6

    I can not open the file .7z to instal Photoshop CS6

    you should not manually extract that archive.
    download the matching exe (the extractor) and place it in the same directory as your 7z (archive). click, or double click, the exe.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Downloading the correct files for an install of v 7

    Hi all,
    I would like to download the relevant files for an install of version 7. I have gone to the pre system 9 page but I cacnnot see the hyperion essbase server in english. It is in other languages such as German, Spainish etc but not English!
    I believe I just require the essbase server, client and admins services. I have no had much exposure to install 7 so if I need anything else please let me know. I am far more familiar with 9 and I am aware 7 does not have HSS.
    Thanks,
    Nathan

    Nathan,
    There are two links of "Hyperion performance management and Bi(pre-version 9.X)".
    check the one, which is of data "OCT-16_2008".
    I have found the required files.
    You are right as far as your understanding of the required 3 files ( server, client and eas).
    No HSS required
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • CS4 will not open NEF files. I installed DNG converter and it did not help.

    CS4 will not open NEF files. I installed DNG converter and it did not help. Also, I tried to just "update" photoshop and it did not work. It is a new camera (Nikon 1).

    Yes, you need CS6. DNG Converter is just a standalone tool to convert RAW to DNG files which then may be possible to open in older versions of Adobe tools.
    Mylenium

  • So how to specify different answer file for different install images in WDS snap-in?

    hello
    in WDS snap-in, in properties on server name, on client tab, we can define an answer file for unattended windows installation on WDS clients.
    my question is, maybe we have added multiple images in WDS snap-in (win xp image, win 7 , win 2008,...)
    now this one answer file applies to all of them ?
    so how to specify different answer file for different install images in WDS snap-in?
    thanks in advanced 

    Under the "Client" tab of WDS, you should only use an answer-file with settings relevant for the installation. This would be credentials for the WDS deployment share, international settings used during the setup and possibly also destination drive
    details (if you want the installation to take care of partitioning the disk etc). The settings relevant for unattend-files used under "Client" would only be of those in phase 1 (WinPE).
    However, if you would like to have specific unattend file for every installation, e.g. Win7, Server 2008, Win 8 etc, you can browse to the image under "Install Images" under the image Groups. There you can select properties for every image and
    have a personal unattend-file.
    hi Joel
    very cool. thanks a lot, that really helped me.
    best regards

  • How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

    How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

    Shouldn't the CC version be able to open any file created in an older version on InDesign?
    Yes, it ought to.
    If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
    The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

  • HOW DO I UNINSTALL WINDOWS 8.1 PREVIEW FROM MACBOOK PRO (SNOW LEOPARD)... CAN NOT FIND README FILE FOR WINDOWS PREVIEW. PLEASE HELP

    how can i uninstall windows 8.1 preview from my macbook pro?? ive looked for over an hour for the readme file for the windows 8.1 preview and have had no luck. ive done almost everything i can think of at the moment and nothing is working. somebody please help, thanks

    Windows 8.1 Preview cannot be uninstalled. However, if what you want is to remove Windows completely, start up in OS X, open Boot Camp Assistant (in /Applications/Utilities) and follow the steps to remove the Windows partition.
    If what you want is to install the final Windows 8.1 version, read this Microsoft support article > http://windows.microsoft.com/en-us/windows-8/update-from-preview

  • Pop up states file is damaged or not a supported file for 3.6.13. How do I download this update?

    I have iMac 10.6.6
    Every week this file tries to download and I get the above message. The full message is "Adobe Reader could not open 'Firefox 3.6.13(2).dmg' because it is either not a supported file type or because the file has been damaged."
    Adobe Reader version is 10.0.0

    What is your operating system?  Reader version?

  • Can not set source file for Fireworks png in Dreamweaver

    I recently purchased Adobe Design Premium CS5 to replace my CS3, but I have a big
    problem.  When I export a png in Fireworks to Dreamweaver it does not set the source
    file correctly.  It places the Fireworks object on the page, but when I select the table
    that holds the Fireworks object, the path for the source on the Properties panel is
    wrong - it says menu2.png.  The correct document relative path is dress_images/menu2/menu2.png.
    When I drag the Point to File icon over the menu2.png on the Files panel, it correctly displays
    the full path, but when I let go of it, it sets the path back to menu2.png.  I can not even type it
    in the source box and get it to stay.
    Here is the problem.  When I click on the Edit button, it says it can't find the png.  It is using
    the full path from the C: drive instead of the document relative path.  If I browse to the png file
    and open it in Dreamweaver then click the Done button, it saves the png file but does not change
    any of the content on the HTML page.
    Fireworks and Dreamweaver CS3 worked perfectly here.  Help!
    I just tried to do this on another computer.  This time when I pasted the Fireworks HTML onto the
    page in Dreamweaver it set the path correctly (it was a root relative path instead of a document
    relative path).  I tried to edit in Fireworks using the Edit button, and it opened Fireworks without
    any problem.  I made some changes then clicked the Done button.  Now the Done button is suppose
    to be like magic.  It is suppose to save the changes to the png file, make the changes on the HTML
    page in Dreamweaver, and change any of the supporting files (images) that have been edited.  It
    always worked this way in CS3, and anything less than this would be a huge step backwards.  In this
    case, it saved the changes to the png, but did not make any other changes.  The web page in
    Dreamweaver is still the same.  How do I get the Done button to work its magic using CS5.
    Another problem - when I paste the code onto the page, the page looks totally messed up.  If I save it
    and reopen it then it looks fine.  However, this never occurred with CS3.  Aren't updates to software
    suppose to be improvements?
    Thanks.
    Nathan

    Yes, the web site is correctly defined in Dreamweaver.  I teach web design for both high school and
    adult school, and I have done this procedure 100's of times with CS3.  There is something different with
    CS5.  I took your suggestion and imported the Fireworks HTML using Insert -> Image -> Fireworks HTML,
    but it still does not work.  I can edit it in Fireworks, hit the Done button, and the png file is saved but
    the HTML page remains the same.
    Also, the export does not get the path right, and it will not let me set the path right.  The only way the path
    is right is if the page that I am pasting the Fireworks HTML is in the same folder as the png.  It always
    sets the png's path as menu.png.  Therefore, if the page is in a different folder, the document relative path
    won't find it.  This was never a problem with CS3.  In fact, you could paste the code using Control-V and it
    would work 100% of the time.  That is how we always did it.  When exporting from Fireworks, I would set
    Export to "copy to clipboard" then move to Dreamweaver, click where I wanted the code pasted and do Control-V and presto it would
    always work.  You could come back a month later, select the table, click the Edit button, make changes
    in Fireworks, click the Done button and the changes would be reflected on the HTML page in Dreamweaver without
    doing anything more.  I have tried it with "copy to clipboard" and I have tried it with "export HTML file".  Neither
    works.  There is definitely something different between CS3 and CS5, and right now I am missing CS3.
    Thanks for your help.  I will keep fighting this until I get it, but any additional input would be appreciated.
    Nathan

  • Dac not generating paramter files for unspecified mapping in one workflow

    Hi,
    We are facing a problem with DAC while generating parameter files.I have a task in DAC which is calling a workflow(It contains two sessions,1.SILOS mapping,2.SILOS_UNSPECIFIED mapping).
    Both are using the same parameter file.
    During Development DAC used to generate parameters for both sessions in the same file.Both now in diff environment,it is generating parameters for the first session
    and for unspecified mapping it is not generating any parameters.So unspecified mappings are failing.
    Any one help?

    Please check whether the file parameterfileDW.txt has the section for that unspecified workflow. If not please copy and paste from DEV env and restart the load.
    If it exists in parameterfileDW.txt and still not not generating section for unspecified session in parameter file then try running the below command at <infa_home>\server\bin
    pmrep listobjectdependencies -n <WORKFLOW_NAME> -o workflow -f <FOLDER_NAME> -d session -p children
    and see whether the output as your unspecified session and post your observations.
    Mark If Helps

Maybe you are looking for

  • How to get the last 32 bits in ANSI X9.19 MAC generation ( very urgent )

    I am trying to generate the MAC of 256bits of data according to ANSI X9.19 standard. I am trying to do this in the following way 1) Encrypt the whole 256 bits using DES in CBC mode ( blocksize=64bits and hence 4 blocks) 2) Taking the last 8 bytes (i.

  • How can i disable terminal access with opendirectory ?

    I'm deploying of a OSX Server over OSX Mountain Lion... And i need to limit the terminal (command line) access. Any suggestion ?? Thanks in advance, W

  • MBP 5,1 - OSX 10.6.8 - Beachballs

    Hello all, I've been searching this site and many other forums for weeks now, ending up more confused than I had planned on. About a month ago (Mid December, 2012) I noticed my Late 2008 MBP started hanging and showing beachballs.  Here is what I hav

  • Flash Novice Needs Help

    I am taking a Flash class and am stuck on a project that I am working on.  It is a simple 'click on the button and the image appears' layout.  I have include a simple action script with button actions.  What happens when I test the movie is as soon a

  • Nothing happens sending some pics and videos iMessage

    I communicate with a few people using iMessage with iPhone 4.  Since IOS 7.0.3, some pictures and some videos will simply not send and nothing shows up in the history.  No indication of an error.  It doesn't show up in the message list and doesn't se