Misprint Press [OK]
I have a Hp Color LaserJet CM2320n MFP.
If I am printing multiple pages, after the second page prints, I get a message on the control panel "Misprint Press [OK]". When I press OK, the second page prints again and then the third. I then get the error message again , them the third page prints again and then the fourth page prints etc..
Could anyone help me overcome this problem?
jsmithtnt
if anyone reads this thread with same issue I can confirm it is a faulty printer - I sent it back to HP, the note with the one that came back said it wasnt repairable? and they sent a refurb one as a replacement (after it first going all over France courtesy of the courrier seemingly sending it to the wrong places)
Similar Messages
-
Hp color laserjet cm1312nfi mfp misprint
Good day.
I have a HP Color Laserjet CM1312nfi MFP, when printing, it prints 2 to 3 pages and then displays cleaning on the lcd display and after it runs through with the cleaning it comes up with the error "Misprint, Press okay to continue" and if you do so it carries on printing the rest of the pages and the quality is 100%. Just annoying that you have to keep getting up and pressing continue on the printer all the time. It does not jam or anything.
Any suggestions to why the printer is doing this?
Regards
AronThe HP drivers won't load on my 10.10.x (10.10.1 thru 10.10.4) OSX macbook pro. The install says the version of OSX isn't supported even thought I've tried 1.5.0 dmg file which is for 10.7 and greater. I did the math and I believe 10.10.x is greater than any version of 10.7. I also tried HP Easy Scan and it doesn't even see my scanner. Printing works fine, but I scan a lot of paper. Also, I've found that the Mac OSX version of the HP software (when it still worked) creates obscenely large PDF files. I can get around this by opening Adobe Acrobat Pro and re-saving the file as a reduced file size with the same name. I can take a 25 MB file HP creates and get it down to about 300KB or so. I found a way around all this but you won't like it. I've loaded Parallels (installed windows 7 ultimate 64 bit) and installed the windows client in my parallels image. The windows client works fine. Not a solution I prefer, but this is an HP issue not an apple issue .... HP hasn't put out a driver for this printer in the better part of 3.5 years. Lastly, I'm not hooking up a USB cable to my printer/fax/scanner .... what's the point of having a dhcp network capable printer if I have to hard wire to a PC? I've used HP printers since the mid-'90s, but I guess it's time to find a company that supports OSX.
-
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
. Every time i click on it says to reopen or dont reopen. i press reopen i gives me this long screen and it says reopen or press okay. when i press ok it closes the box and doesnt open. when i press reopen the long screen and stays like that.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I know this has something to do with INSERT key in Windows I guess. But suddenly I was using Mac OS X Lion and a keyboard sign appeared in the top bar, and the keyboard didnt work as it usually does. I mean, I wanted the long press key to write multiple caracters of course. Please help!
It's now a hidden option that can be turned on with a terminal command. The easiest way to do this is to download TinkerTool from this site:
http://www.bresink.com/osx/0TinkerTool/download.php5
Then go to Tinkertool > General tab > Select "support key repeat".
Logoff and login again.
Regards,
Captfred -
Pressing Question about my wireless performance. Yes ... everyone has one! ":-\
Is there any reliable and typical answer that could satisfy me about this layman test I performed?
My neighbor across the street has the same Verizon DSL speed I have. He recently acquired his service with a new modem.
My service and modem are about 7 years old.
I can connect, with his permission, to his Wi-Fi service, which is about 150 or more feet away in another house yet.
I can connect with my wireless with my Wi-Fi service with the router right next to the pc
Using the test which they claim is very accurate at http://www.auditmypc.com/internet-speed-test.asp
I get no better speeds with my service, just a couple of feet away than with his at 150 plus feet. Connected to his wireless even my pc connected with the network cord, the speeds are very compareable.
I asked Verizon if it could be my modem was 7 years old. They said no, their tests showed I was getting what I should be. How is it that his wi-fi is so strong I can get speeds comparable to mine just 3 feet away?
Is there any reasonable explanation, and should I press them for something .... I don't know what? I think as long as they say I am getting what I should they won't take action. Even though the speeds are comparable when I connect to neighbors everything is more fluid, quick. On mine when I am trying to follow links or even in such as Facebook, which I guess has to update via the wi-fi when scrolling etc, for more data it is choppy and lags. When connected to his it's more fluid.
Any help here? Thanks for taking the time to read. jackFirst question is how do you know your neighbor has the same speed you do. Have you compared transceiver statistics?
Verizon prices DSL service in tiers, basically anything between 1 and 3 mbps is considered to be 3Mbps, and anything from 3-7mbps is 7mbps. So unless you have compared transceiver statistics, you don't know if your neighbor really has the same DSL speed you do or not. So while you might be a 1.5mbps, he might be at 3 mbps, but you would both be in the 3mbps tier.
Having said that, and assuming you really both have the same underlying speed, you get down the issues with wireless in general. The problem with 802.11b/g service is the band that it operates in is shared by a veritable laundry list of devices including remote controls, cordless telephones, and other wireless devices. There are essentially 3 channels available for 802.11b/g, 1, 6 and 11. Depending upon the exact circumstances, some channel choices are going to be much better than others. You can change the selection from automatic to specific channels by logging into your router, and access the wireless menu.
Ultimately the performance of your wireless is driven by the signal to noise ratio. The higher it is, the faster the connection. Other users of the band where 802.11b/g operate generally look like noise, and reduce the signal to noise ratio, and the effective speed of the connection. The unpleasant reality is there are more things that can interfere with 802.11b/g service than you can shake a stick at, and that's why Verizon will say nothing and do nothing about a wireless service from their routers. There are simply too many variables that are beyond their control.
Bottom line is that you can try other channels for your wireless and see if it makes a difference. Ultimately if you want better performance, you probably need to go to a dual band 802.11n wireless access point (assuming your device has a card capable of 802.11n dual band operation). The 5 GHz band where 802.11n can also operate has more 'real estate' than the 2.4GHz band, and at the moment, substantially fewer applications. So the odds on a higher sustainable rate with 802.11n dual band service are better. -
I switch the power on on my MacBook Pro I get windows7
this is no problem but I love my IPad and would like to use the apple system on my MacBook .
CAn anyone tell me which keys I press to change from windows 7 to Apple most articles I have read tell you it is easy but not one says "firstly press x then press y and when you see c press v so I no idea how to do it,
I am well educated but I am 75 so I do not understand the jargon but I am fairly good at using computers and I do like the app system.
I Would be very pleased if someone can advise me
best regards
TOmReboot, hold the option key down as soon as you hear the chime. When the Boot Manager appears select OSX instead of Windows.
-
Topic says it all...
My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
Then after like 15-20sec it will throw out a:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
I have tried pressing C while booting up but it doesn't work...
Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
* hold down immediately after pressing the power button and until the OS choice screen appears.
To summarize.
1 Use the above method to boot into Mac OS.
2 Download the instructions and read them.
3 Use Boot Camp Assistant to remove the partition.
4 Pick your friends more carefully. -
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
I need an alert message if I press ctrl shift b
Hi All,
I Need an alert message if I Press "ctrl+shift+b"(to make the selected text bold). Is this possible?
Regards,
ChinnaCreate a keyboard shortcuts (ctrl + shift + b) for your script and try...
Code must be like this:
alert("Bold Shortcut....");
app.selection[0].fontStyle = "Bold";
P.S.: you have to set conditions for bold, bold italic, etc.
Vandy -
When chaning filename in Finder, pressing 9 causes document to print?
This is the strangest and most annoying glitch ever. If I'm modifying file names from a finder window (say, adding 2009, after the name) when I press the '9', the document immediately prints. Sure, I can open the file and Save As to change the name, but I'd rather fix this funny automated option.
Can anyone help?
Thankshello hhoag, & welcome to Apple Discussions
have u set dat as a shortcut by accident in SysPrefs? if u wont 2 chek, here is da path:
System Preferences > Keyboard & Mouse > Keyboard Shortcuts > Application Keyboard Shortcuts. clik da arrow next 2 it & see if there is anything there.
i hope this helped...
iBen&iLoveApple -
I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
Pretty much what the question says. I updated to the latest Firefox, and now this really irritating thing happens.... It happens lots of places too. Some specific things:
* Clicking on the address bar at all does not bring up the little flashing cursor thing, and generally gives me no indication that I've actually clicked on the URL. Same with that little google search thing in the upper right.
* Most frustratingly, when I press enter after putting in a URL, it won't even go to the site.
* After getting annoyed at both of those things, I try to type in something on a website, and though the URL stays the same, it starts dropping down a lot of suggestions from my history.
* Lastly, when I'm doing my crosswords on Washington Post and I switch to a different tab to type something on there, it doesn't switch my typing thing over - it stays on the crossword, typing things into that rather than into the typing field I clicked on to start typing in.
So, yeah, this is highly annoying, and I'd love for any help for these issues...
I did look at the FAQs, and they said something about the AVG SafeSearch thing causing one of my problems, but I don't have that extension, so it's definitely not that!The AVG Safe Search extension can cause problems with the Enter key not working in the location bar.
-
How to stay back on same section of a report after pressing cancel button
Hi,
How we can stay back on a same section of a report page when I press Cancel button or Apply Changes button from linked Data Entry Form. For instance if I have a 200 rows in a report and I scroll down to 80th row and press Edit button when called a data entry form. Now when I press Cancel it again re-load the report from the start of the page.
Any idea!
Thanks
SabahatHi Sajid,
Thanks for reply.
I have used RETURN statement like below.
SUBMIT RFWT0010 WITH vendor = 'X'
WITH i_lifnr IN i_lifnr
WITH i_bukrs IN i_kunnr
WITH test = 'X'
AND RETURN.
The output of RFWT0010 is displayed. but on pressing "back" button on toolbar, the flow is coming back from RFWT0010 to calling report. I want that On pressing ENTER button of keyboard. The flow should come back to calling report.
Regards,
Ratnesh -
Posted the entire text from the error window, when trying to update, using the normal NON-TECHIE way to update any and all Adobe CC products, via the Creative Cloud updater installed when Adobe Creative Cloud subscription was purchased when first offered.
The following occurs, ad nauseam:
There was a problem updating InDesign CC
For more information see the specific error below.
Update Failed
Download error. Press Retry to try again or contact customer support.(49)
Here's the crux of my frustration:
(1) Customer Service is NOT contact-able, to receive LIVE help.
(2) There is NO way for me to mitigate this "Download error", being a student learning InDesign, and NOT in any way capable of tweaking folders/files here and there.
Therefore, the real question:
Given that a significant number of subscribers are having the above referenced issue with attempting to download the current update for InDesign, WHAT ARE WE SUPPOSED TO DO, in order to get our contractually paid-for updates to our legally and contractually paid-for Adobe software, specifically in my case, InDesgin's current update?
Please, NO TECHNICAL mumbo-jumbo which most likely will cause the overwhelming majority of users, like me, to seriously corrupt their computer files, but rather an honest, straightforward "what to do" from real CS/Engineers working for Adobe, as to how to FIX this issue, period.
===========================================================
UPDATE:
Here is a way in which I think I was able to "update" my InDesign CC application:
(1) Sign-In to your Adobe Account
https://www.adobe.com/
(2) Click on the MENU icon
(3) Click on the product InDesign icon
Your browser should display the page for Adobe InDesign CC
https://www.adobe.com/products/indesign.html?promoid=KLXLU
(4) Click on the Download icon,
Your browser should now display the page to download InDesign,
https://creative.adobe.com/products/download/indesign
(5) a Pop-Up window should open, and display:
Launch Application
This link needs to be opened with an application.
with the first option to select being the CreativeCloud(URIHandler)
(5) Select this application and click OK.
What happened when I followed steps (1) thorugh (5) is that:
(a) InDesign CC(2014) was installed,
(b) InDesign CC, updated, and then
(c) InDesign CC(2014), also updated.
Why this all worked, is a mystery to me.
Looks like a separate, "new" version of InDesign, InDesign CC(2014), was installed, the existing "old" InDesign was updated, and then the newly installed Indesign CC(2014) was further updated.
A BIT MORE, when I launched my InDesign CC app, and checked to see if there were Updates Available, there in fact was an Adobe InDesign CC 64 bit (9.2.2) update.
I clicked on UPDATE and my "old" InDesign CC app was "successfully updated."
FURTHER INFO: I may have neglected to list some important info ... OS: Windows 8.1 Pro with Media Center, 64-bit
Confused, I am able to launch BOTH of these apps, and hopefully I may use one of these versions of the InDesign CC app, to do some InDesign work.
Will keep y'all posted!
Message was edited by: Richard Yapkowitz, about an hour after I first posted this issue.Jackdan error 49 indicates the installer was unable to access a critical file or directory. You can find additional details at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
Maybe you are looking for
-
I recently installed all the of CC 2014 applications and noticed that in Photoshop CC 2014, when I choose the "Browse in Bridge" menu option it doesn't launch Bridge at all. Instead it opens the Creative Cloud desktop application window instead. I
-
Songs can't be convert into Ring Tone
There seems to be a problem with itunes or with the songs buying online. When i bought the songs and try to convert into ring tones it say "this song can no longer be covert into a Ring tones" i bought about 5 to 6 songs and all of them says the same
-
Short dump Error in BAPI_BUS2054_SET_STATUS
I am trying to set status of wbs element and have the following sequence of calls based on the Error in BAPI_BUS2054_SET_STATUS CALL FUNCTION 'BAPI_PS_INITIALIZATION' . CALL FUNCTION 'BAPI_PS_PRECOMMIT' TABLES et_return = it_bapiret. CALL FUNCTION 'B
-
HPCM errors when deploying cubes to Essbase
Hello all, I'm trying to deploy cubes into Essbase from Profitability application (Bikes sample app). But I'm still getting following errors in hpm.log: 2010-02-08 12:49:27,227 [Thread-20] ERROR com.hyperion.profitability.data.mdb.essbase.EssbaseAPI:
-
Drag And Drop In Webdynpro Abap
Hi, Is It Possible For Drag And Drop Option For Text Elements ( not For Images) In Webdynpro Abap.. Do NeedFull Help..