Missing Database Options under Configure menu in Sequence Editor

In my TestStand 4.0 Sequence Editor, the "Database Options" is missing under "Configure" menu. Does anyone know how to enable this option?
Thanks

Glad that was it! Definitely narrows things down.
These entries on the Configure menu are controlled by a special type of sequence in the process model called Configuration entry points. If you open up one of the default models, you will see a sequence in the Sequences pane called "Configure Database Options". This is the default database options sequence.
It's possible that your custom model contains a Configure Database Options sequence, but that it isn't configured to be an entry point. You can change this setting by right-clicking the sequence and choosing Sequence Properties.
If the custom model does not contain the database functionality at all, further work may be required to add that functionality in. Here's a document explaining how to add new configuration entry points to a process model: http://www.ni.com/white-paper/3837/en Depending on whether this model was originally based on one of our default models and how much of the original database logging code is still present, it may require a fair amount of work to reimplement that functionality. It might be a good idea to contact the person who created this custom model to find out more information about why those database options were removed and how difficult it might be to reimplement them.
Daniel E.
TestStand Product Support Engineer
National Instruments

Similar Messages

The report options under "configure" and CSV or xls.

The report options under “configure” does not give .csv or xls as options. Instead of using vi to pass data to database, is there a simple way to transfer all the results (just like the way in the report that automatically generated) to .csv or xls...
Thanks.

Hi,
in order to modify the report generation, you have to understand the way how TestStand works in regard of the report generation.
There is a tutorial which explains this which you can find here. But please note that the tutorial is currently undergoing an improvement process.
The reason that the report options don't give you the option for xls or csv as report is:
Neither xls nor csv are predefined. So for example measurement values in xls can be placed in a special worksheet or included in a main sheet in a certain column.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

I have installed Copy HTML but cannot find it as an option under any Menu. Only copy is there.

I have installed the Copy HTML plug-in but cannot find it as an option under any Menu. The only option is "copy". Where do I find this option so I can use it?

Your screenshot shows that you have the page source visible, so you already have the source code including HTML code available to copy.<br />
You should see the Copy HTML entry if you right-click a normally rendered HTML page.

How to Disable\Remove Registration option under Help menu in Lightroom 5.3

Hi,
Could someone kindly guide as to how can we remove\Disable the Lightroom Registration option under help menu for Adobe lightroom 5.3?
I intend to deploy the application for enterprise users and do not wish that the users should be able to see the Serial number or try registering the product on thier own.
I know this can be done for Adobe CS6 and CS5 using the AAMEE tool which again does not work for Lightroom.
Is there any tool from Adobe or any registry key/File to suppress this option.
Kindly Advice.
Thanks in Advance!

Currently, there isn't a way to do this. But this has reacently become a common feature request and we are working to get it added.

No library panel option under windows menu PC signed in to cloud

I have photoshop at home and work I want to use shape captured on my ipad noticed no library panel option under windows menu.
in general Cloud, Bridge andLlibraries confuse me obviously not the same but after viewing tutorials more confused.
Damian Burns smart and stupid at the same time!

Chris and Gener7here are my system details below
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2491 MHz
Built-in memory: 8074 MB
Free memory: 5400 MB
Memory available to Photoshop: 7045 MB
Memory used by Photoshop: 60 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Disabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
thankyou for trying to help me
Damian Burns
Sent from my iPad

Muse trial version only has "close" for option under file menu and it's grayed out.

Muse trial version only has "close" for option under file menu and it's grayed out.

Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
Add code to userChrome.css below the @namespace line to make the hidden items appear again.
*http://kb.mozillazine.org/userChrome.css
*http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
*ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
/* Always show menu entries with class="show-only-for-keyboard" */
#navigator-toolbox menuitem[class="show-only-for-keyboard"]{display:-moz-box!important}
</nowiki></pre>

Database options under UCM

With regard to this thread: Few interesting facts about database under UCM 10g what Oracle database options can be effectively used under UCM? The comprehensive overview of the options can be obtained here: http://www.oracle.com/us/products/database/options/index.html
Real Application Clusters* - this option can be used to increase the database performance and availability. It is fully transparent to applications.
Partitioning* - this option can affect performance, enable hierarchical storage management (using cheaper hardware to store large amount of data) and help with disaster recovery (backup/restore). I believe, if documents are stored in the database, this option is a must. Even if a project does not use HSM, partitioning of large tables such as FILESTORAGE will enable: a) faster backups - once a partition is "closed", it will not change - therefore, future backups can work only with "open" partitions and unpartitioned data; b) faster restores - large tables can only be partially restored - e.g. few "last months" and the system can be running whilst restoring the remaining data. Watch out for partitioning of metadata tables, though (DOCMETA, REVISIONS, DOCUMENTS)! At least, there are no clear criteria how these tables should be partitioned - and various checks and validations may actually require to have those tables restored fully before you may perform such basic operations like check-in.
Advance Security* and Database Vault* - these options may increase security, when content is stored in the database (no one, not even administrators might be able to reach the content unless authorized). The only drawback to that is that even if content is stored in the database, in initial phases it is anyway stored in the filesystem (vault), too, and the minimum retention period is 1 day
I will also mention two options that might look appetizing, but UCM probably does not benefit from them too much:
Advanced Compression* - compresses data in the database. This, and Hybric Columnar Compression used in Exadata, can do the real magic when working with structured data (just read a report from Turkcell, who compressed 600 TB to 50 TB, which means by 12). For unstructured data, such as PDF or JPEG, the effect might be very small, though. Still, if you have a chance, give it a try.
Active Data Guard* - Data Guard is a technology for disaster recovery. Advantage of Active Data Guard is that it allows using of the secondary location for read only operations, rather than leaving it idle (stand-by); this means, you might decrease sizing of both locations. With UCM, also do not forget about CONTENT TRACKER (which might require a "write" operation even for otherwise read only ones, such as DOC_INFO, GET_SEARCH_RESULTS, or retrieving a content item), but db gurus know how to handle even that. Unfortunately, Active Data Guard cannot be used with UCM at the moment, because not all the data is stored in the database and the secondary location might not be fully synchronized.
In my opinion, other options are not so relevant for a UCM solution.

Compression and Deduplication of SecureFiles LOBs, which is part of the Advanced Compression Option, can potentially deliver huge space savings, and performance benefits. If the content is primarily Office documents, or XML documents, or character-based (email?), then it will likely compress very well. Also, if the same file is stored multiple times, deduplication will cause the Oracle database to store only one copy, rather than storing the same document multiple times. There's more info on Advanced Compression here: http://www.oracle.com/us/products/database/options/advanced-compression/index.html

Missing "Planning" option in configuration utility after installing BPMA

Hello,
I am unable to find "planning" option in configuration utility after installing BPMA.
But the planning applications are working normally.
Has anyone faced this issue before?
Can anyone please tell me how to bring the back in configuration utility?
Thanks
Hemanth

Hello Azmat,
You are right I did the same.
It was a big mess when I did that. I had to reapply patches and re-set DIM settings.
I saw this posting by John in the forms.
Planning Option Not Visible in Configuration Utility
Wondering if this is the solution.But I found this post after re-installing planning in Dev and QA.
I am yet to install EPMA in prod. I want to see if I can install it without disturbing other environments.
Thanks
Hemanth

CS5 Bridge has no Photoshop option under tools menu

I am running CS5 under Win7. I have previously tried th
e demo version, but since have installed the purchased version with ACR6.1.
Problem is that I have no Photoshop sub menu under the tools menu in my Bridge. This means no
HDR merge Pro available, only from within Photoshop itself, which limits me to 16 bit image processing.
All other options seem ok (I can do panoramas from within Photoshop..)
I tried a full deinstall and reinstall, but no joy, problem is persistent. Any ideas?
Many thanks in advance.
Regards, Julian

Hello Zeno, Many thanks for the fast answer. This seems to make sense to me, but I seached for a long time for such an answer.. I shall try it when I get back to my personal computer in a few hours.
Cheers,
Julian

No deactivate option under help menu

I'm trying to deactivate my CS3 for Mac (to install on other machine) but neither PS, nor AI, nor ID have an option to Deactivate under the Help menu. Running OS 10.5.7 with latest updates. Any ideas? Image file showing my Help menu under PS CS3 is attached as .png.

multiple seat licenses do not have activation/deactivation.

Disable Sleep option under Apple Menu

Hi,
Some users sometimes put my server to sleep by hitting the sleep button under the Apple menu. How can I disable this button?

The server in most installations is a very important resource. It just strikes me as a bad idea to allow anyone to use the server as a workstation, and risk taking down your whole cluster if it freezes up (or they press sleep, or do a restart).
If resources are scarce, it seems smarter to turn your server computer into a workstation, and run the Server software on an old junker. Most file server work is not compute-intensive, and does not require top-of-the-line compute power.
You can run Mac OS Server on computers as old as the beige G3 (with XpostFacto), or the Blue & White G3 directly. A used beige G3 can be had for less than US$100, if you do not already have one lying around.

My "PUT" option, under SITE menu is no longer available to upload my page to the web?

Why is my "put" option is no longer available? I haven't changed anything since I used it uesterday.

I'm sorry, I meant the icon in the Files window, not the File menu.
Click Window > Files, or hit F8 to bring up the Files window. You should have a set of icons across the top of that window. One of them is the Put (up arrow) command.
As for opening a file from your site, I meant, open a page in DW from the Files window of your defined site, like your index.html page, first and see if the option comes back in the Site menu.
If you don't have a proper Site Definition created in DW, none of this will work though.
If you updated recently from a different version of DW, it would be a separate program, not an overwriting program of the old version, so you need to create site definitions in the new version to get your site options.

Please Help - Urgent - Activating an Option under Extras Menu in QE11

In Transaction QE11 i.e Record Results in QM Module after entering the Inspection Lot no and coming to the screen of the results.
In the EXTRAS - > Statistics , the option Calculate Statistical Moments is disabled..I want to activate that.
Is this Possible??
Please Help..suggestions also will be rewarded.
Regards,
Vanessa

Hi,
please put the question in correct thread....

I'm unable to find configuration option under sett...

Hi, I m unable to find configuration option under settings menu. please help. I am using Nokia X2 dual sim
Moderator's Note: Post was moved and changed the title into a subject-related title.

Hi, what would you like to configure?

Database Option not available in UCCX 9.0.2

Hello there,
I have installed Cisco UCCX 9.0.2 and trying to access Database option under Subsystems but unfortunately it is not listed under Subsystems menu.
Snapshot is attached..
Is it a licensing issue or something else has to be done?
Thanks in advance.

Hi Afzal,
depends on the license :
The database subsystem is available if your system has a license installed for
either the Unified IP IVR or Unified CCX Premium product packages. If you are
not using Unified CCX applications that require access to databases, you do not
need to provision the Database subsystem.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_0/configuration/guide/UCCX_BK_U767AC77_00_uccx-admin-guide/UCCX_BK_U767AC77_00_uccx-admin-guide_chapter_01000.html
u have got which license with you ?
regds,
aman

Missing Database Options under Configure menu in Sequence Editor

Similar Messages

Maybe you are looking for