Missing definitions for block storage control

Hey guys,
I am trying to transfer my material from a temporary storage bin in storage type 001 to a bin i created in storage type 004. When I go into transaction lt04 and try to do the transfer i get the following message.
<i>Missing definitions for block storage control (B1 001 1)
Message no. L3082
Diagnosis
Certain information on block storage control is missing in your system definition.
There is no definition for the sectioning of the storage bins in block storage according to storage bin type, storage unit type and block code.
Procedure
Contact your system administrator about this error. Note down the parameters in the error message and the situation that caused the error.</i>
I have setup the storage bin types and storage unit types. I do not know what the block code is however and I do not really understand what is being asked of me. Any help would be greatly appreciated. Thanks in advance

Hi Fernando,
I had the same problem, everything was correct but the system showed the same error. I changed the material data in transaction MM03, View warehouse Management 1, i inserted values the field "Bulk storage indicator" and the field "Allow addition to existing stock".  Other change was in the Storage Bin in transaction LS02N, the storage Bin type should be the same as Storage Unit Type defined in SPRO (Define Strategy for Bulk Storage)
Best regards,
Alejandro

Similar Messages

  • Equium A100-027 - Missing driver for mass storage controller

    Hello,
    after installing Windows 7 32bit, Multimedia Card Reader not working. All updates and drivers are installed, except mass storage controller driver, I can't find this driver anywhere.
    Please help
    Thanks

    Try to install driver designed for A200 or A210. Maybe this will help. If not, who cares about card reader. Point is you can use Win7 and everything else works perfectly.
    Disable this device in device manager and be happy.

  • Essbase 7.1 Block Storage Issues

    Hi,I created a cube(bolck storage mode) on aix Olap server 7.1 and loaded 13 million records from SQL server. when I start default calculation, it consumes all the disk space on the server. In aggregate storage the cube takes around 500MB, when as in calculation (Block storage) i t consumed around 30GB space and server ran out of the space, Can anybody know the reason for it. If there is no change in sparse or dense dimension, why the data file and index file should be restructured?This is really worrying me, how I can suggest my client to go for block storage configuration with Essbase 7.1.Thanks,BK Sinha

    What you describe can be normal. There is a lot more tuning and optimization needed for a BSO cube than a block storage cube. That is where real consultants step in and make things work. I have a BSO cube that takes about 20 gig of space in ASO it only takes 500 meg.

  • C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

    Hello experts,
    I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
    string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
            string tempFileName = fileName;
            int count = 1;
            while (allFiles.Contains(tempFileName ))
                tempFileName = String.Format("{0} ({1})", fileName, count++); 
            output = Path.Combine(folderPath, tempFileName );
            string fullPath=output + ".xml";
    However, it gives the following compilation errors
    for the Select and Contain methods respectively.:
    'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
    (are you missing a using directive or an assembly reference?)
    'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
    found (are you missing a using directive or an assembly reference?)
    I googled on these errors, and people suggested to add using System.Linq;
    I did, but the errors persist. 
    Any help and information is greatly appreciated.
    P. S. Here are the using clauses I have:
    using System;
    using System.Data;
    using System.Windows.Forms;
    using System.IO;
    using System.Collections.Generic;
    using System.Text;
    using System.Linq;

    Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look 
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.IO;
    namespace consAppFileManipulation
    class Program
    static void Main(string[] args)
    string fullPath = @"c:\temp\trace.log";
    string folderPath = @"c:\temp\";
    string fileName = "trace.log";
    string output = "";
    string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
    string extension = Path.GetExtension(fullPath);
    string path = Path.GetDirectoryName(fullPath);
    string newFullPath = fullPath;
    string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
    string tempFileName = fileName;
    int count = 1;
    //THIS IS AN INFINITE LOOP
    while (allFiles.Contains(fileNameOnly))
    tempFileName = String.Format("{0} ({1})", fileName, count++);
    //THIS CODE IS NEVER REACHED
    output = Path.Combine(folderPath, tempFileName);
    fullPath = output + ".xml";
    //string fullPath = output + ".xml";
    UML, then code

  • Block Storage location for particular material

    Hi,
    We gave defined storage location for finished product as follows>
    1050 - 2-8°
    1040 - RT
    When I have created one material, wrongly i have created it in 1050 instead of 1040.
    Then i have extend that material to 1040. Now that material is showing both storage locations.
    Is it possible to block storage location 1050 for this material only?
    Because of both SLOC thre are chaces of wrong receipt in 1050.
    Pl. help me to solve this problem.
    Gkude

    Dear Mr. Kunal,
    I have flagged storage location for deletion but till for this storage location system allows receipt also system allows stk. transfer in this location.
    Pl. help me so that storage location is permanently deleted from the material or system not allow for GR.
    Hope for your reply.
    Gkude

  • Can we block a material for particular storage location ?

    We can allow material to storage locations by MMSC. Can we block a material for particular storage location ?
    Please share ur view.

    Hi,
    If you want a material to be blocked, go to the Basic data 1 view of the material,there in the genral data you have " X-plant material status ". Also in Cost estimate 1 view of the material you have Plant Specific Material status. Use the options available to block the material in these two views.
    Also u can goto MM06 where put material,plant,storage location.When u select enter just tick the check box of material,plant and storage location and save it.
    Pls reward if found useful.
    Regards,
    Indranil
    Message was edited by:
            INDRANIL BHATTACHARYYA

  • Block Customer for Particular Storage Location

    Hi.
    I want to Block a Customer for Particular Storage location.
    ie plant 1000(St Loc 01,02)
       plant 2000(St Loc 03,04)
    Block Customer XYZ for Plant 2000 & Sto Loc 03
    is this possible?
    Reg.
    Amol

    Through standard settings, this is not possible.  Try with USEREXIT_SOURCE_DETERMINATION (MV45AFZB) where you have to define the storage location and the customer code.
    thanks
    G. Lakshmipathi

  • Block Storage Location for Material Movement

    Dear MM Gurus,
    pl let us know how to block storage location for a material in Plant.
    Requirement is transfer posting (MIGO)  should not allow by using 311 mov type in sloc, error message to receive.
    example ;
    material ; 5000
    sloc ; 0001
    sloc ; 0002
    migo-transfer posting should not happen by using 311
    5000
    0001 - to 0002
    we want to block sloc-0002, how to block sloc, pl help if any solution available.
    thanx in advance
    regards
    srihari

    Hi,
    You can block the material completely for any movement type by checking <b>X Plant matl status</b> in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object  M_MSEG_LGO    can be worked to remove the movement type or storage loaction .
    Dhruba

  • WidgetBrowser installation fail with error code 7 (The storage control blocks were destroyed.)

    Client machine is Windows 7 x64.
    I am using AdobeApplicationManager tool to extract sources from original Set-up.exe.
    Extracted sources contain Build and Exceptions folder. The Build directory contain Dreamweaver.msi and Exceptions contains AdobeHelp and WidgetBrowser sources.
    After silent installation of Dreamweaver.msi, i'm tried to install WidgetBrowser but it return error code 7(The storage control blocks were destroyed).
    I tried on different windows 7 x64 client but still its not working.
    Please help.

    Hi,
    I have the exact same problem, except I am using 32-bit Windows 7. 
    Thanks
    Rosy_55

  • Blocking storage location for particular material

    All SAP Gurus,
    Can we block the storege location for particular material.
    Regards,

    Block Storage Location from further posting
       You can block the storage location of a material without affecting the rest of the location using the same material.
        Create a Physical Inventory document for the storage location with transaction MI01
        Select the Posting Block checkbox.
        This would prevent transactions from occuring until you either post or delete the physical inventory document.
        (There are no impact, unless you do a post difference for the physical inventory document.)

  • I should know, but I don't. If I upload all of my photos to iCloud and then delete them off of my iPhone (for more storage space), will they all remain in iCloud or am I missing the point of iCloud?

    I should know, but I don't. If I upload all of my photos to iCloud and then delete them off of my iPhone (for more storage space), will they all remain in iCloud or am I missing the point of iCloud?

    Right now, there is no way to upload and access photos in iCloud. You need to import them to a computer if you want to be able to retrieve them later:
    PHOTO IMPORT IOS TO MAC/PC
    Cheers,
    GB

  • Is ther a way to block storage location for a particuler User id?

    Hi,
    Is ther a way to block storage location for a particuler User id.
    If yes, how to do it?
    Points will be awarded....
    regards,
    sathya

    Hi,
    Go to SPRO > MM > Inventory Management and Physical Inventory > Authorization Management > Authorization Check for Storage Locations > Here activate the authorization for storage location under plant
    And use authorization object as "M_MSEG_LGO"
    Regards
    Merwyn

  • Block Storage Location For Any Movment

    Hi All
    Does it possible to block storage location for any movment
    I know I have authorization object but it is required from me to change all roles
    and to look for all transaction that make movment
    Does there is a easy way just to block the storage location without delete it

    hi
    Use Transaction Code MM06 to set a deletion flag for material at storage location level. This shall be done for all materials that have this storage location that can be found by checking the table MARD with SE16.
    As well the message M7 127 from warning to error message (transaction OMCQ) must be changed
    Vishal...

  • Bug: Universal app input controls (i.e. Start Menu, Task view buttons) ignoring and missing interpretative translation for legacy input control context request (right-click)

    Redundant post - however the topic (title) is different to point out the potential of adding translation for right-click to universal app input controls. The part about a solution for translation is in bold at the bottom of this post ...
    Bug: Universal app input controls (i.e. Start Menu, Task view buttons) ignoring and missing interpretation translating right-click to a left-click to activate context (menu) in universal app web style (similar to oo context menu for oo legacy style).
    Bug: Task view: OO context menu: Should show "nothing" (like right-click Start Menu button) - but right click Task view shows the oo context menu for the Task bar (wrong context)
    Besides behaving wrongly (should be like right clicking the Start button) ....
    the problem is the user is likely to look for actions on that context menu.
    However to activate the context menu for this universal app kind of behavior you actually need to left-click the button for the Task view ... and then you get the universal app like context menu.
    Microsoft must have been trying to figure out what to do about this kind of voupling mismatch between legacy (right-click) and universal app (left-click) conmtext menus. confusing for users it weill become nevertheless.
    But the left-click style supports touch.
    One solution though is to support right-click on i.e. Task view and Start button. Thus for new kind (universal app kind-of)input controls - right-click will work (instead of just being ignored) just like left-click. Allthough not a correct left-click
    - it will be helpful and interpretive translating the intension of receiving a context. A practical solution with right-click translating into left-click for universal app controls considering that the context menu actually has become a hybrid of left-click
    and right-click (with a precedence for left-click though)

    This is a great post.
    I couldn't have written it myself better.
    I'm also in dying need of Korean input as I can't communicate with my Korean friends.
    But I second every point.
    I hope the tech teams are reading this.

  • Is it worth it to make custom icons for a custom control/indicator?

    I was making custom icons (well not very custom, but still at least somet ext) for controls and indicators, when I realized that the only times you see them are when you open the control, itself, ot if you hover over it in the project with context help on.
    So the question is:
    Is it worth it to create a custom icon for each custom control you make, if it will be seen only rarely?  (The exception being a cluster, since, in the later versions of LabVIEW, you can actually represent your cluster on the BD as the icon you made for it, so it definitely IS worth it to make an icon for it.)
    Thanks!
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
    Solved!
    Go to Solution.

    Hooovahh wrote:
    I'd like to add another time that you see the control's icon, is when it is a type def cluster, and you have it as a constant on the block diagram.  Then double click the border to shrink the cluster.  It will shrink to the size of the control's icon.
    I also hardly ever make a control icon.  Only when it is on the palette in a reuse package.
    Yeah,t hat's what I meant in my original post, although you CAN represent a cluster constant on the BD as an icon - but it's just the little thing on the bottom of the typdef'd cluster because it obviously has no actual icon. 
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Maybe you are looking for