Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned. 
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default.  It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild  0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features. 
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.  Be especially careful to use
# proper, forward slashes here.  On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories.  The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used  to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems.  Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/.  The alias provides
# the manual, even if you choose to move your DocumentRoot.  You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Similar Messages

  • Missing images and CSS styles! [subject edited by moderator]

    I edited a template in dreamweaver and uploaded it to my new website yet it only shows plain text? All of the pretty layout and pictures are missing? How do I upload all of the files the way that it looks in dreamweaver? Because there it looks perfect.
    neilmangicaro.com is the website

    I don't know where you got your "Template"  but in DW, Template.dwt files serve a very specific purpose for maintaining the overall appearance of your site wide pages and common elements such as footers, headers & menus.  If you're not familiar with DW Templates yet, I urge you to read the F1 Help Section > About DW Templates. Dreamweaver Help | About Dreamweaver templates
    A Template.dwt file is basically a common structure shared by many child pages that are spawned from that Template. 
    Nancy O.

  • When I open (launch) ps6, two old images always open.  always the same 2 images, and always when I launch the program. what is going on?

    when I open (launch) ps6, two old images always open.  always the same 2 images, and always when I launch the program. what is going on?

    Check your userid autorecovery folder after you close Photoshop. If there are psb files in it delete them

  • I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

  • Send HTML Email with Embedded Images and CSS

    Hi All,
    I have a html page. I want to send that html page(not with attachment) with all images and css. i search and try but I cant find a good solution. can any one help... plz..........
    Thank You.....

    If you want to send the html page and have it
    reference the images and css files on your web
    site, that's pretty easy. Just create a message
    with text/html content that is your html page.
    If you want to include all the images and css files
    in your message along with the html page, you'll
    need to create a multipart/related message and
    you'll need to change all the html to reference the
    images and css files using "cid:" references.

  • My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...

    My iPad screen has gone black.  I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again.  I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using.  Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't.  It has not been dropped and has been in a case for years!  Please help!

    When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...

  • I got an update message for iOS 7 but can't download as it keeps shutting down and the wheel goes so slow that you can hardly see it moving and says it will take 5-6 hours to download approx. 64 megabytes

    I got an update message for iOS 7 but can't download as it keeps shutting down and the wheel goes so slow that you can hardly see it moving and says it will take 5-6 hours to download approx. 64 megabytes

    Which way are you trying to update - iTunes or WiFi in the iPad settings? Try switching from one method to the other method. If you don't have a computer and need to use WiFi, try closing all apps and then reboot your iPad and try again.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of all of the apps in the recents tray. Tap the home button or anywhere above the task bar when you are done.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    It wouldn't hurt to reboot your router either by unplugging it from power for about 30 seconds, plug it back in, let it fully start up and then try to update again.

  • I want to remove the header and footer when printing from my mac, i can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?

    I want to remove the header and footer when printing from my mac, I can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?
    == This happened ==
    Every time Firefox opened

    Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
    The first is labeled "Printer",
    The second is "Presets".
    The third is unlabeled but has "Copies & Pages" selected by default.
    Click on that third menu and select "Firefox" near the bottom of the list.

  • Missing images and not able to use copy and paste anymore - just blank rect

    Hello!
    I've a problem that really scares me.
    I use severall png and pdf images. But at one point keynote looses the media and just displays these grey rectangles instead of some images. I tried to figure out if it just happens with pdf images and replaced the missing pdf images through png24 images with transparency. It first worked fine (they showed up) and then it tells images can not be saved. If I open the presentation again, the images are missing. And it seems that the more images and slides i put in the presentation, the more images are missing…
    But there is more: I even can't copy and paste these images anymore. If I try to copy one of the images I just have replaced (because they have been lost by saving), it just pastes the blank grey rectangle instead of the image.
    This really is a problem because I now have to repetitive tasks (like same animation for the same image in the same size) over and over again. And when I save the doc – they are al gone again…
    It really scares me and I don't have an idea how to solve this.
    It also happens, if I repleace an pdf image with an png image and than try to copy this new png image. However I am able to drag the image from the Finder again.
    I am working on a PB G4, 1.5 GHz, 1 GB RAM.
    My Keynote Version is 3.0.2.
    The Keynote Dokument is saved and opened from a G4 X-Serve wich is only used by Macs (so no Windows Filesystem anywhere). I still have anough space on both, my local and the server volume. I don't transfer the Keynote document. So it should not be a problem with the names on the files… And the files are just exported from Adobe Illustrator (png 24 files with "save for web" and the pdf files are saved as Illustrator pdf) – so they should really be fine and not corrupted…
    At this time the Keynote document has a size of 179 MB (because of a video) and only 16 slides. And the theme was built from scratch – so no import from Powerpoint or so…
    I looked through the Keynote preferences and found a thing like (sorry self-translated from german version to english) "scale placed images to slide-size". I wondered if keynote saves a copy of the sacaled image after that and corrupts the image itself? But I don't think so.
    I've had these problems with earlier versions of Keynote, but it occured just sporadically and I could solve it through pasting it again. But this time I can not solfe it anymore.
    Does anybody encounter same problem? Or has a hint?
    I really would appreciate, because I have to finish the presentation very soon and are not able to work properly with that. Furthermore, I am scared of saving and opinging the presentation again, because the lost files can not be replaced…

    I now have a hint:
    As a colleague said, he encountered some problems with usagerights on our fileserver (XServe). He said he wasn't able to read files he put on the server himself again…
    If this is true, the same could have happened to Keynote for placed images, as Keynote writes these images as separate files in the doc package…
    I will try to work on my local volume and see if it solfes the problem.
    But sooner or later I will have to place the whole thing on the server again…
    Do you think this is the reason?

  • Kaosweaver Random Images And CSS

    I have searched all over and can't find an answer to this and have an e-mail in to the developer but figured I would ask here as well.
    I am using Kaosweaver Advanced Random Images to rotate pics on a home page in the editable content area.  The CSS style for the text in the content area is to line up on the left.  When I insert the Kaosweaver command )even if I insert it with the cursor in the middle of the page the images line up on the left of the page.  If I make a CSS rule that centers the text there is no way to apply it to the images I can tell.....except that if I go into the code and find the name of the image in the Kaosweaver code, highlight it and right click it lets me apply the CSS rule (even though I see no visible changes to the rule.  Is this OK and will it end up causing problems on different browsers etc?
    Is there another way to do it.  I could see attaching a second style sheet just for that page with items centered as there will only be one other line of text on the page so that it won't matter if everything on that one page is centered but I don't want everything on all the pages centered.
    Is there an easier way of accomplishing this.  I was surprised in Googling this that noone else seems to have this problem....am I doing something wrong?
    Thanks.
    Howard

    Thanks Murray...it isn't on line, but I can copy the code:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/maintemplate.dwt" codeOutsideHTMLIsLocked="false" -->
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <!-- InstanceBeginEditable name="doctitle" -->
    <title>Howard Grill Fine Art Photography</title>
    <!-- InstanceEndEditable -->
    <!-- InstanceBeginEditable name="head" -->
    <meta name="robots" content="index, follow" />
    <meta name="Description" content="Howard Grill Photography specializes in landscape, nature, and abstract fine art prints.  Please feel free to browse, as the site, blog and galleries are updated frequently." />
    <!-- InstanceEndEditable -->
    <link href="oneColFixCtrHdr.css" rel="stylesheet" type="text/css" />
    <script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
    <link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
    </head>
    <body>
    <div class="container">
      <div class="header">
        <h1><img src="Images/headerlogo/headerlogo.png" width="515" height="41" alt="Howard Grill Fine Art Photography" /><br />
          &quot;
          Seeing Things In A Different Light&quot;<br />
        </h1>
        <ul id="MenuBar1" class="MenuBarHorizontal">
          <li><a href="index.html">Home</a>      </li>
          <li><a href="portfolios.html" class="MenuBarItemSubmenu">Portfolios</a>
            <ul>
              <li><a href="landscapes.html">Landscapes</a>          </li>
              <li><a href="pittsburghparks.html">Pittsburgh Parks</a></li>
              <li><a href="sceneinstone.html">Scene In Stone</a></li>
              <li><a href="dreamscapes.html">Dreamscapes</a></li>
              <li><a href="urban.html">Urban Architecture</a></li>
              <li><a href="botanicals.html">Botanicals</a></li>
              <li><a href="oddsnends.html">Odds 'N Ends</a></li>
            </ul>
          </li>
          <li><a href="#">Blog</a>      </li>
          <li><a href="articles.html">Articles</a></li>
          <li><a href="purchase.html" class="MenuBarItemSubmenu">Purchase</a>
            <ul>
              <li><a href="purchaseprints.html">Prints</a></li>
              <li><a href="purchasefolios.html">Folios</a></li>
              <li><a href="purchasenotecards.html">Note Cards</a></li>
            </ul>
          </li>
          <li><a href="about.html" class="MenuBarItemSubmenu">About</a>
            <ul>
              <li><a href="bio.html">Bio</a></li>
              <li><a href="contact.html">Contact</a></li>
              <li><a href="#">Comments</a></li>
              <li><a href="#">Mailing List</a></li>
              <li><a href="#">Website</a></li>
            </ul>
          </li>
        </ul>
      </div>
      <!-- end .header -->
      <div class="clear"></div>
      <!-- InstanceBeginEditable name="MainContent" -->
      <div class="content">
    <p> </p>
        <h2>
          <script language="JavaScript">
    // Advanced Random Images Start
    // Copyright 2001-2002 All rights reserved, by Paul Davis - www.kaosweaver.com
      var j,d="",l="",m="",p="",q="",z="",KW_ARI= new Array()
    // KW_rs[12000]
      KW_ARI[KW_ARI.length]='/Images/homepage/autumnmisthome.jpg';
      KW_ARI[KW_ARI.length]='/Images/homepage/dreamscapes1home.jpg';
      KW_ARI[KW_ARI.length]='/Images/homepage/dreamscapes3home.jpg';
      j=parseInt(Math.random()*KW_ARI.length);
      j=(isNaN(j))?0:j;
        document.write("<img name='randomSlideShow' src='"+KW_ARI[j]+"'>");
    function rndSlideShow(t,l) { // Random Slideshow by Kaosweaver
      x=document.randomSlideShow; j=l; while (l==j) {
        j=parseInt(Math.random()*KW_ARI.length); j=(isNaN(j))?0:j; }
      x.src=KW_ARI[j]; setTimeout("rndSlideShow("+t+","+j+")",t);
    rndSlideShow(12000,0)
    // Advanced Random Images End
          </script>
        <!-- KW ARI Image --></h2>
    <p>To remove the inline styles, make sure your CSS Styles panel is set to Current. Select the image, and in the Properties pane of the CSS Styles panel, right click and delete the display and background properties. (Of course, you can always go directly into the code and delete the inline styles from the image or placeholder there.)</p>
        <!-- end .content -->
      </div>
      <!-- InstanceEndEditable -->
      <div class="footer"> © 2011 Howard Grill | All Rights Reserved <span class="footertextright"><a href="index.html" title="Howard Grill Photography Home Page">Home</a> | <a href="contact.html" title="Contact Howard Grill ">Contact</a><!-- end .footer --> | <a href="sitemap.html" title="Site Map">Site Map</a></span></div>
      <!-- end .container --></div>
    <script type="text/javascript">
    var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
    </script>
    </body>
    <!-- InstanceEnd --></html>

  • OS X 10.8  Problems with images and layout when printing to PDF from any web browser

    Hi there,  I just bought a new macbook air and running OS X 10.8.  This problem happens in both Safari or Chrome:  When I go to print to a PDF file, the website suddenly drops most images and formatting, ending up in a very old-fashioned layout.  Is this something new with OS X 10.8, or any other suggestions as to what I can do?
    BEFORE:
    WHILE PRINTING:

    NewOSX10.8 User wrote:
    No difference.  I have discovered that it is probably the websit (weird) that is mainly at fault, as I tried the same thing on 2 other machines and the same thing happens to a varying degree on this website, and a lesser degree on other sites.  Thanks for your help, it may not be OS X 10.8 at the root of the problem.
    Yes if it prints to a printer in the same manner, and it occurs regardless of browser it is the website.

  • Error When Starting the Portal Server - Plz Advise

    Hi..
    I want to start the Portal Server.
    so, i followed the steps..
    up the listener,dcm,emctl..
    but, when i open the Em from browser
    "http://<host>:1810/
    It stated that some component did'nt start..
    So, i clicked Start All button..
    it gaves me this erorr...
    Plz Advise..
    Tq
    oracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionoracle.sysman.emSDK.util.jdk.EMExceptionjava.lang.NullPointerExceptionjava.lang.NoClassDefFoundError"

    scanzano,
    I was wondering if you ever received and answer to this question, becuase I am faced with the same problem when I attempt a signon to the 'admin server' I receive the following message:
    type Status report
    message Invalid direct reference to form login page
    description The request sent by the client was syntactically incorrect (Invalid direct reference to form login page).
    This is displayed as an "HTTP Status 400 - Invalid direct reference to form login page!!??" It appears that this message has been around for a while so I'm wondering if this issue will ever get resolved??

  • Since trying to download iOS 7 my iPad 2 has just got a black and white line going across the screen, I can no longer do anything with my iPad can any one help

    I've downloaded iOS 7 on my iPad 2 and after a couple of hours I've got black, white and blurred lines going across my screen and I cannot use my iPad 2 at all, can't see anything or do anythingg on it. Can anybody help?

    bigsavz wrote:
    To be honest I don't need a lot of people commenting on this.  I need Apple to comment ...
    This is a user-to-user forum. Apple does not respond to posts here. You can give Apple your feedback on the Feedback page:
    http://www.apple.com/feedback
    They don't respond directly there, either. And once you post something here, people will comment as they see fit, regardless of what you originally hoped for. That's just the way it is with a public forum.
    Try Groove for iPad. People seem to think it's a great replacement to the previous music app.

  • Prompting for UserName and Password when I click Report Server Web Service URLs in ssrs 2008 R2

    Hi All,
                 I am using SQL Server Reporting services 2008 R2 . When I tried to open report server webservice URL in SSRS 2008 R2 It is prompting username and password. I tried to resolve the issue by deleting the <!--
    <RSWindowsNegotiate/> --> line in rsreportserver.config but still I am getting the same prompt
    and i tried by putting the server URL in trusted sites in IE also still no luck. I referred the below link 'http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx'
    I am getting the same error.
    Can anyone help me out to resolve this issue easily.
    Thanks
    Dathy

    Hi Dathy,
    Generally, this is a very common issue in Reporting Services 2008 R2, the blog you post is a good blog that summary the common solutions. If it doesn’t help, could you please try the following:
    Open Internet Explorer, go to Tools and click on Internet Options.
    Under the Security tab, click on Trusted sites and click the Sites button and Add Report Manager/Report Server URL to the trusted sites.
    Then click Custom Level, and check the option Automatic logon with current user name and password.
    Repeat step 3 and step 4 for Local Intranet.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • I have an Iphone 5C and I'm going to Brazil next month.Can i buy a Sim card there and use my phone?

    I have an Iphone 5C and i'm going to Brazil next month.
    Can I buy a Sim card and use my phone? Is it easy to change the card?
    Any ideia how much will cost? Can I still use my phone to face time with
    my family here if I change the Sim card? Thanks

    If you're talking about "regular" icloud, then setting it up should have no effect on your music.  Try syncing the device to iTunes and check the music settings and sync again.
    If you subscribe to iTunes Match, is the device in wifi range?

Maybe you are looking for