Missing "Recordset Sequence" in FCC

HI
We are in SP19 and We find that the parameter "Recordset Sequence" is missing in the FCC paramaters section of the sender File Communication channel
Is there a way to get back that field? Or should we revert back to SP15
regards
krishna

Thank You Guys
We've tried to re-import the Basis Components into IR but the issue persists.
Should we re-start XI after importing the components?
or
is there any other work-around this issue
Thanks
Krishna

Similar Messages

Recordeset per message with variable recordset sequence?

Hi,
I'm uploading a text-file with three different recordset substructures in any number and in variable sequence. I.e. a file could look like below:
structure 1
structure 1
structure 3
structure 2
structure 1
structure 3
structure 1
Thus the File adapter settings are as follows:
Recordset Structure = structure 1,,structure 2,,structure 3.*
Recordset Sequence = Variable
This works fine, the problem is the file is huge and I would like to limit the number of records in each message by using the recordset per message parameter. But if you have a variable recordset sequence the whole message is regarded as one recordset. If I change to ascending sequence I get an unpredictable number of messages since a recordset change is only done every time the file "breaks the order" defined in the Recordset Structure. Basically I want each record to be regarded as a recordset so I can split the file up with a predictable number of record per message. Is there any work around possible?
//Johan

Dear Johan,
if we say structure 1 as "A" structure 2 as "B" structure 3 as "C" and with sequence as variable then "regular expressions" reprsented as
(ABC).
any combination at file structure comes as a message or as you say single record at sender side.
if you really want to break the records and conquer where order is not important,
that is A record ,B record, C record are independent of each other at XI processing then go for 3 FILE ADAPTERS and 3 different message structures as A* 2)B* 3)C*.
this will definitely result in controlling message load at XI .
but can say for sure that there can be no replacement for (ABC) since it results in various combinations of A,B,C for example take computer language set it is (10)* and your is (ABC) there by its very diffciult to break this structure equivalent to some structure which meets your requirement.
and also no meaning of breaking it as (AB)* or any combination,
we will end no where if we look for replacement for (ABC),
what can we do is go for independent structures or limit Structure order at FILE mean
atleast (ABC)* or (ABC) .
Thanks & Regards,
Rama Krishna

Missing planning sequence as URL parameter (PLANNING_SEQUENCE) webdynpro

Hi,
I created an iview for Abap WebDynPro for 'zrsplf_file_upload' (webdynpro for load a flat file in IP) and assigned application name, application parameters (PLANNING_SEQUENCE=FILE_SEQ) but i get "Missing planning sequence as URL parameter (PLANNING_SEQUENCE)".
This one is working in when I run the webdynpro in BW with the same parameter:
Do you have any suggestion ?
Thanks

Hi ,
Check for the links given below:-
Check this blog IP:
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
if you're using the BPS:
through Web
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/708fc3f8-a61d-2a10-fb82-b7c237ae16ba
using SAPGUI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7034028c-ad1d-2a10-2c94-868e7707dfe2
Please open a seperate thread for the problem you are facing.
Regards,
Indu

Missing a Sequence

When I opened my project in Premiere just now, I am missing a sequence. I did a search for it and turned up nothing. It is a valuable one-highlighting a football video and I had copied and pasted all the possiblities for the "slow motion" portion into that sequence. Any thoughts? It was there yesterday...

I appreciate your quick reply. I have already twirled down every bin 3 times. The auto saves didn't go back far enough to help.
I am just really in the dark about how this could even happen...how do I keep it from happening again??? One positive thing. I had backed up the entire project to an external HD. I will copy that huge file back on my computer with a different title and hopefully be able to paste that sequence back into the project. The sequence will be one game behind, but not such a big deal.
Any thoughts on how to keep this from happening??

I am missing several sequence presets in PP CS6- how can I resolve this?

I am missing several sequence presets in PP CS6- how can I resolve this?

http://helpx.adobe.com/premiere-pro/kb/features-presets-missing-premiere-pro.html

Missing Browse Sequences in HTML Help

Problem
Browse sequences in our Microsoft HTML help (.CHMs) are missing after we upgraded from RoboHelp x5 (running WinXP Pro) to RoboHelp 9 (running Win7, 64-bit).
Background
We've been using RoboHelp x5 and RoboSource Control 2.3 version control for several years. Prior to 2012, our RoboSource Control server machine was a WinXP Pro VM session, while our 3 RoboHelp/RoboSource Control client (author) machines were physical WinXP Pro machines.
After the first of this year, our 3 client machines were replaced with Windows 7 Enterprise, 64-bit physical machines. In order to continue running RoboHelp x5, we created a Windows XP Pro virtual machine on each client machine; Robohelp x5 and the RoboSource Control 2.3 client software were then installed and run from the WinXP VM environment. Browse sequences were included in the many (at least 4 per month) CHMs that we compiled/generated during the several months that we ran in this environment without any issues.
We just (over the past few weeks) upgraded to Adobe's Technical Communication Suite 3.5 (RoboHelp HTML 9 and RoboSource Control 3.1). A new Windows 7 Enterprise, 64-bit VM was created for the RoboSource Control server installation, and we simply installed the RoboHelp 9 and RoboSource Control 3.1 client software directly on our 3 Windows 7 client machines. We did not remove the VM sessions from the client machines, but we don't run them either.
Since we upgraded RoboHelp to version 9 (which is also to say, started running RoboHelp in a true Windows 7 64-bit environment), none of our browse sequences appear when we compile/generate a .CHM in RoboHelp 9 and then launch the .CHM from anywhere OTHER THAN within the RoboHelp HTML application. If we launch the Help from within RoboHelp, using either the Generate Primary Layout function (and then view result) or the View Primary Layout function (HTML Help is our primary layout), the browse sequences appear and function properly.
I've already researched (including this forum and all the previous posts on this issue) and run tests, attempting to identify the cause and/or resolve the issue. The actual tests and results are listed after the next section (which provides technical details on what I believed to be the critical aspects of this issue within our environment; perhaps someone will spot something regarding the version of the HHActiveX.dll or a path/value for one of the registry settings).
Environment Technical Details
RoboHelp 9/RoboSource Control 3.1 Server
OS: Windows 7 Enterprise, 64-bit, SP1
RoboHelp Programs:
MS SQL Server Express 2005
RoboSource Control 3.1 Server and Client
RoboHelp HTML 9.0.2.271
Note: RoboSource Control 2.3 was installed on this machine at one point, in an attempt to perform the database migration, but it was subsequently uninstalled and the migration was performed on our old Windows XP RoboSource Control 2.3 server machine. No other version of RoboHelp has ever been installed on this machine.
HHActiveX.dll: Here are all the instances of HHActiveX.dll on this machine.
C:\Program Files\(x86)\Adobe\Adobe RoboHelp 9\RoboHTML
File version: 9.0.1.262
Product name: Adobe RoboHelp HTML 9
Product version: 9.0.1.262
File size: 759 KB
Date modified: 6/22/2011 4:45 PM
C:\Program Files\(x86)\Adobe\Adobe RoboHelp 9\Redist
File version: 9.0.1.262
Product name: Adobe RoboHelp HTML 9
Product version: 9.0.1.262
File size: 759 KB
Date modified: 6/22/2011 4:23 PM
C:\Program Files\(x86)\Adobe\Adobe RoboHelp 9\Redist\x64
File version: 9.0.1.262
Product name: Adobe RoboHelp HTML 9
Product version: 9.0.1.262
File size: 1.11 MB
Date modified: 6/22/2011 4:23 PM
Registry References to HHActiveX.dll:
HKEY_CLASSES_ROOT\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A0422DF}\1.0\0\win32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422DF}\InprocServer32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422DF}\ToolboxBitmap32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll, 102
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{959F94FD-DD1E-11D2-B559-00105A0422DF}\InprocServer32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_CLASSES_ROOT\Wow6432Node\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A0422DF}\1.0\0\win32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRUregsvr32 C:\Program Files (x86)\Adobe\Adobe RoboHelp9\Redist HHActiveX.dll\1
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A0422DF}\1.0\0\w in32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\InprocServer32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\ToolboxBitmap32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll, 102
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{959F94FD-DD1E-11D2-B559-00105A0422D F}\InprocServer32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A042 2DF}\1.0\0\win32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\InprocServer32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\ToolboxBitmap32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll, 102
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{959F94FD-DD1E-11D2-B559-00105A0422D F}\InprocServer32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A042 2DF}\1.0\0\win32C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML\HHActiveX.dll
HKEY_USERS\S-1-5-21-2146773085-1508210334-1857977687-1551\Software\Microsoft\Windows\Curre ntVersion\Explorer\RunMRUregsvr32 C:\Program Files (x86)\Adobe\Adobe RoboHelp9\Redist HHActiveX.dll\1
HH.exe: Here are all the instances of HH.exe on this machine.
C:\Windows
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 16.5 KB
Date modified: 7/13/2009 9:39 PM
C:\Windows\SysWOW64
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 15.0 KB
Date modified: 7/13/2009 9:14 PM
C:\Windows\winsxs\amd64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_24 4ae8599e6d81bb
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 16.5 KB
Date modified: 7/13/2009 9:14 PM
C:\Windows\winsxs\wow64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_2e 9f92abd2ce43b6
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 15.0 KB
Date modified: 7/13/2009 9:14 PM
Registry References to HH.exe:
HKEY_CLASSES_ROOT\Applications\hh.exe
HKEY_CLASSES_ROOT\chm.file\DefaultIcon%SystemRoot%\hh.exe,0
HKEY_CLASSES_ROOT\chm.file\shell\open\command"%SystemRoot%\hh.exe" %1
HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCacheC:\Windows\hh.exeMicrosoft® HTML Help Executable
HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\MuiCacheC:\Windows\hh.exeMicrosoft® HTML Help Executable
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRU
C:\Windows\SysWOW64\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm\1
C:\Windows\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm\1
C:\Windows\winsxs\amd64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_24 4ae8599e6d81bb\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm\1
C:\Windows\winsxs\wow64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_2e 9f92abd2ce43b6\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm\1
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Applications\hh.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\chm.file\DefaultIcon%SystemRoot%\hh.exe,0
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\chm.file\shell\open\command"%SystemRoot%\hh.exe" %1
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectDraw\MostRecentApplicationhh.exe
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FileAssociationRUNDLL32.EXE;MSHTA.EXE;DLLHOST.EXE;APPLAUNCH.EXE;HH.EXE;WINHLP32.EXE;MMC.EXE;
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\explorer\FileAsso ciationRUNDLL32.EXE;MSHTA.EXE;DLLHOST.EXE;APPLAUNCH.EXE;HH.EXE;WINHLP32.EXE;MMC.EXE;
HKEY_USERS\S-1-5-21-2146773085-1508210334-1857977687-1551\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell\MuiCacheC:\Windows\hh.exeMicrosoft® HTML Help Executable
HKEY_USERS\S-1-5-21-2146773085-1508210334-1857977687-1551\Software\Microsoft\Windows\Curre ntVersion\Explorer\RunMRUC:\Windows\SysWOW64\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm\1
HKEY_USERS\S-1-5-21-2146773085-1508210334-1857977687-1551_Classes\Local Settings\Software\Microsoft\Windows\Shell\MuiCacheC:\Windows\hh.exeMicrosoft® HTML Help Executable
RoboHelp 9/RoboSource Control 3.1 Client Machines
OS: Windows 7 Enterprise, 64-bit, SP1
RoboHelp Programs:
RoboSource Control 3.1 Client
RoboHelp HTML 9.0.2.271
HHActiveX.dll: Here are all the instances of HHActiveX.dll on these machines.
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\Redist
File version: 9.0.1.262
Product name: Adobe RoboHelp HTML 9
Product version: 9.0.1.262
File size: 759 KB
Date modified: 6/22/2011 4:23 PM
C:\Program Files(x86)\Adobe\Adobe RoboHelp 9\Redist\x64
File version: 9.0.1.262
Product name: Adobe RoboHelp HTML 9
Product version: 9.0.1.262
File size: 1.11 MB
Date modified: 6/22/2011 4:23 PM
C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\RoboHTML
File version: 9.0.1.262
Product name: Adobe RoboHelp HTML 9
Product version: 9.0.1.262
File size: 759 KB
Date modified: 6/22/2011 4:45 PM
C:\Windows\System32
File version: 11.0.228.0
Product name: RoboHelp HTML 11
Product version: 11.0.228.0
File size: 452 KB
Date modified: 11/18/2003 2:44 PM
C:\Windows\SysWOW64
File version: 11.0.228.0
Product name: RoboHelp HTML 11
Product version: 11.0.228.0
File size: 452 KB
Date modified: 11/18/2003 2:44 PM
HH.exe: Here are all the instances of HH.exe on this machine.
C:\Windows
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 16.5 KB
Date modified: 7/13/2009 9:39 PM
C:\Windows\SysWOW64
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 15.0 KB
Date modified: 7/13/2009 9:14 PM
C:\Windows\winsxs\amd64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_24 4ae8599e6d81bb
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 16.5 KB
Date modified: 7/13/2009 9:39 PM
C:\Windows\winsxs\wow64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_2e 9f92abd2ce43b6
File version: 6.1.7600.16385
Product name: HTML Help
Product version: 6.1.7600.16385
File size: 15.0 KB
Date modified: 7/13/2009 9:14 PM
Registry References to HHActiveX.dll:
HKEY_CLASSES_ROOT\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A0422DF}\1.0\0\win32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422DF}\InprocServer32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422DF}\ToolboxBitmap32C:\Documents\DSISWHelp\hhactivex.dll, 102
HKEY_CLASSES_ROOT\Wow6432Node\CLSID\{959F94FD-DD1E-11D2-B559-00105A0422DF}\InprocServer32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_CLASSES_ROOT\Wow6432Node\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A0422DF}\1.0\0\win32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRUregsvr32 C:\Documents\DSISWHelp\hhactivex.dll\1
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A0422DF}\1.0\0\w in32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\InprocServer32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\ToolboxBitmap32C:\Documents\DSISWHelp\hhactivex.dll, 102
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\CLSID\{959F94FD-DD1E-11D2-B559-00105A0422D F}\InprocServer32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A042 2DF}\1.0\0\win32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\InprocServer32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{399CB6C4-7312-11D2-B4D9-00105A0422D F}\ToolboxBitmap32C:\Documents\DSISWHelp\hhactivex.dll, 102
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{959F94FD-DD1E-11D2-B559-00105A0422D F}\InprocServer32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\TypeLib\{399CB6B4-7312-11D2-B4D9-00105A042 2DF}\1.0\0\win32C:\Documents\DSISWHelp\hhactivex.dll
HKEY_USERS\S-1-5-21-2146773085-1508210334-1857977687-1551\Software\Microsoft\Windows\Curre ntVersion\Explorer\RunMRUregsvr32 C:\Documents\DSISWHelp\hhactivex.dll\1
RoboHelp x5 and RoboSource Control 2.3 Server
OS: Windows XP Professional, SP3
RoboHelp Programs:
RoboSource Control 2.3 Server and Client
RoboHelp HTML x5.0.2 (Build 606)
Note: MS SQL Server and RoboSource Control 3.1 were temporarily installed in order to convert the databases from RoboSource Control 2.3 to RoboSource Control 3.1.
HHActiveX.dll: Here are all the instances of HHActiveX.dll on these machines.
C:\Program Files\RoboHelp Office\Redist
File version: 13.10.801.0
Product name: RoboHelp HTML 13
Product version: 13.10.801
File size: 460 KB
Date modified: 11/4/2004 10:54:04 AM
C:\Program Files\RoboHelp Office\RoboHELP
File version: 13.10.801.0
Product name: RoboHelp HTML 13
Product version: 13.10.801
File size: 460 KB
Date modified: 11/4/2004 10:54:04 AM
C:\Program Files\RoboHelp Office\RoboHTML
File version: 13.10.801.0
Product name: RoboHelp HTML 13
Product version: 13.10.801
File size: 460 KB
Date modified: 11/4/2004 10:54:04 AM
HH.exe: Here are all the instances of HH.exe on this machine.
C:\WINDOWS
File version: 5.2.3790.2453
Product name: HTML Help
Product version: 5.2.3790.2453
File size: 10.5 KB
Date modified: 4/14/2008 5:42:22 AM
C:\WINDOWS\ServicePackFiles\i386
File version: 5.2.3790.2453
Product name: HTML Help
Product version: 5.2.3790.2453
File size: 10.5 KB
Date modified: 4/14/2008 5:42:22 AM
Troubleshooting Tests and Results
Test 1: Ran command line: C:\Windows\SysWOW64\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm
Result: Browse sequences PRESENT.
Test 2: Ran command line: C:\Windows\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm
Result: Browse sequences ABSENT.
Test 3: Ran command line: C:\Windows\winsxs\amd64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_24 4ae8599e6d81bb\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm
Result: Browse sequences ABSENT.
Test 4: Ran command line: C:\Windows\winsxs\wow64_microsoft-windows-htmlhelp_31bf3856ad364e35_6.1.7600.16385_none_2e 9f92abd2ce43b6\HH.exe C:\Documents\DSISWHelp\DSISWHelp.chm
Result: Browse sequences PRESENT.
Test 5: Deleted HHP, CPD, and created new HTML Help SSL definition. Opened project, compiled with new SSL, opened CHM from Windows Explorer via double-click.
Result: Browse sequences ABSENT.
Test 6: RoboHelp install again. Didn't see any "repair" options, so I ran the install over the existing one. Then deleted HHP, CPD, and created new HTML SSL definition. Compiled. Opened the CHM from Windows Explorer via double-click.
Result: Browse sequences ABSENT.
Test 7: Edited the browse sequences to see if that would trigger or set a flag. Note: I already compared the "flags" (it's actually a number sequence) in the RHwnd.apj file (via Notepad) to the "flags" in the RHwnd.apj file. While I don't know which one represents browse sequence enabling, the number sequences were identical. Note: I compared RHwnd.apj files pre- and post-Browse Sequence enabling (with no other changes), but the flag values were completely different (it's not a simple 0/1 flag).
Result: N/A
Test 8: I copied older CHMs that were generated/compiled in RoboHelp x5 over to my local, Window 7 Enterprise, 64-bit, SP1, machine. Launched the CHMs from Windows Explorer by double-clicking on them.
Result: Browse sequences ABSENT.
Test 9: I browsed over our network (via Windows Explorer) to our old RoboHelp x5/RoboSource Control 2.3 server, and launched older CHMs that were generated/compiled in RoboHelp x5 and still sitting on that machine, by double-clicking on them.
Result: Browse sequences ABSENT.
Test 10: I logged on (via RDS) to our old RoboHelp x5/RoboSource Control 2.3 server (WinXP), and launched older CHMs that were created (and never upgraded) in RHx5 by double-clicking on them.
Result: Browse sequences PRESENT.
Test 11: I logged on (via RDS) to our old RoboHelp x5/RoboSource Control 2.3 server (WinXP), opened Windows Explorer on that machine, browsed over the network to our new RoboHelp 9/RoboSource Control 3.1 server (Win7), and then launched new CHMs that were generated/compiled in RoboHelp 9 by double-clicking on them.
Result: Browse sequences ABSENT.
Test 12: I logged on (via RDS) to our older RoboHelp x5/RoboSource Control 2.3 server (WinXP), copied CHMs that were generated/compiled on our new RoboHelp 9/RoboSource Control 3.1 server (Win7) in RoboHelp 9 over to the WinXP machine, and then launched them by double-clicking on them.
Result: Browse sequences ABSENT.
CONCLUSIONS
The machine you are logged on to matters more than where the CHM resides (that is, locally or on another networked machine), or even the version of RoboHelp that it was compiled/generated in (although as my next conclusion states, this last one does appear to matter).
Supporting evidence: CHMs that were compiled/generated in RoboHelp x5 only display browse sequences when they are launched (via double-click) locally from a WinXP machine. Browse sequences are absent when they're launched from a Win7 machine.
The version of RoboHelp that the CHM was compiled in matters.
Supporting evidence: Browse sequences in RoboHelp 9 generated/compiled CHMs do not appear, even when the CHMs reside on a WinXP machine. Is HHActiveX.dll somehow incorporated into the generate/compile process?
Either HH.exe or HHActiveX.dll, or both, matter.
Supporting evidence: Browse sequences appear in RoboHelp 9 generated/compiled CHMs on a Win7 machine when I launch the CHM from a command line, specifying which HH.exe to use.
Is this a function of the HH.exe (there are multiple instances of HH.exe on my Win7 machine, but the command line solution doesn't work for all of them; plus, each files seems to be identical/the same version), or
is it a function of HHActiveX.dll (does HHActiveX.dll registration control which HH.exe works, which would explain why some of HH.exe's don't work from a command line; the assumption here, then, is that when I double-click a CHM, the default HH.exe that is used isn't the one that's registered)?

Hello again
Hopefully Colum won't mind my offering a few answers here and there,
RoboFan wrote:
Thanks for the response, Rick. I appreciate the feedback.
A few follow-up questions...
Can you confirm that neither the version of HH.exe, nor its file path matter?
Unsure what you mean by the version of HH.exe mattering. If you double-click a CHM file on a 64 bit Windows system, it appears that it automatically opens the 64 bit version of HH.exe. Short of having an installation routine of some sort that reconfigures the operating system to open the 32 bit version instead, I can't fathom a way that you would be able to influnce the behavior. Obviously, application developers are able to force this choice. I say that because after you compile and choose to View Result, RoboHelp opens the 32 bit version of the CHM viewer. Now whether this is behavior that is designed by the application developer or whether it's standard Windows behavior with RoboHelp being a 32 bit application is beyond me. Only Adobe can really say for sure what is going on.
How do I identify/verify that an instance of HHActiveX.dll is the 32-bit version?
How do I identify/verify that an instance of HHActiveX.dll is the 64-bit version?
I'm not sure there is a way. At least I'm not knowing a way. I think the best you can do is supply both versions and tell your installation team to register both. Then it shouldn't matter, no?
Where can I obtain the 64-bit version of HHActiveX.dll?Based on my research, it appears that C:\Program Files (x86)\Adobe\Adobe RoboHelp 9\Redist on our 64-bit machines would be one such location. Can you verify this?
I think Colum answered that.
Where should the 64-bit version of HHActiveX.dll that I subsequently register, reside (i.e., file path)?
Wherever you (or more precisely your installation team) decide to place it.
Likely you will think that answer is a bit snarky. But it's not intended to be that way. I'm just being honest. That's why you have to register it with Windows. The process of registering the DLL tells Windows where it is and how to work with it.
Should I replace all 32-bit instances of HHActiveX.dll on our 64-bit machines?
I've never encountered a need to replace versions. But again, likely only Adobe can answer that one with a straight face.
Assume I successfully register the 64-bit version of HHActiveX.dll. If our primary layout in RoboHelp HTML is HTML Help and I invoke the Generate Primary Layout function (and view result) or View Primary Layout function in RoboHelp HTML (i.e., I launch a .CHM from within RoboHelp HTML), will RoboHelp HTML re-register the 32-bit version of HHActiveX.dll? And if this is the case, does that mean I'll have to go back and re-register the 64-bit version each time I use either of those functions?
Launching the file does nothing to register the dll. That's why there is a separate process. The act of registering should be a one off. I believe what happens is that the Windows Registry is modified with information that HH.exe (64 bit or 32 bit) uses to determine what to do with the dll(s). Again, I'm not an application developer nor did I stay at a Holiday Inn Express last night so I can't claim to be one.
I believe that once you get both dlls properly registered, it won't matter if you launch the 64 bit or the 32 bit version of HH.exe. The Browse Sequence window should then show. (Incidentally, the same dll also manages behavior of the Glossary tab functionality in a CHM)
What happens in a mixed (32-bit/64-bit) environment?
Our in-house network contains a mix of 32-bit and 64-bit machines.
We post a .CHM (with browse sequences) to a standalone PC (no RoboHelp applications are installed on this particular PC) on our in-house network.
All the 32-bit and 64-bit machines on the network can access this single .CHM file via a shortcut.
Does the existence and registration of HHActiveX.dll matter for just the PC hosting the .CHM, just the PCs accessing the .CHM, or all PCs? And which versions of HHActiveX.dll need to be registered for which machines?
Yeah, good luck with that. Years ago, Microsoft modified the behavior of CHM content to disallow working that way. CHMs are intended to be copied to *EACH PC* using it. There are ways to modify the Windows Registry to allow CHM to still work that way, but it's something your IT staff have to manage. And by modifying things to allow it, you have to relax security and that makes a machine more vulnerable to attacks down the road. Years later, Peter Grainge still reports that his page on this is still among the most often visited. Click here to visit Peter's page.
Hope I managed to satisfactorily answer your "few" other questions. I tried... LOL
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Standby database unable to fetch missing archive sequence from primary

Hi,
My primary oracle db version is 10.2.0.5 which is n Windows 2003 server 32 bit in file system
My standby database version is 10.2.0.5 which in wondows 2008 server in ASM instance.
some of the archivelogs are not fetching by standby database from primary db.because of that recovery is not happening and it waits for missing archive logs but its not transfering on satndby database.
I tried many time by doing manuall..manuall its hapening but again sometimes its stucks and waits for next missing archivelog.
standby alert log mesage
Sun Jul 08 21:33:13 Pacific Daylight Time 2012
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 128945-128945
DBID 4176230406 branch 617106566
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Sun Jul 08 21:44:03 Pacific Daylight Time 2012
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
trace file of standby
Dump file d:\oracle\admin\mks01p\bdump\mks01p_mrp0_6628.trc
Sun Jul 08 21:30:23 2012
ORACLE V10.2.0.5.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Oracle Label Security, OLAP, Data Mining and Real Application Testing options
Windows NT Version V6.1 Service Pack 1
CPU : 8 - type 8664, 4 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:37019M/49108M, Ph+PgF:87277M/103214M
Instance name: mks01p
Redo thread mounted by this instance: 1
Oracle process number: 19
Windows thread id: 6628, image: ORACLE.EXE (MRP0)
*** SERVICE NAME:() 2012-07-08 21:30:23.422
*** SESSION ID:(95.1) 2012-07-08 21:30:23.422
*** 2012-07-08 21:30:23.422 64949 kcrr.c
MRP0: Background Managed Standby Recovery process started
*** 2012-07-08 21:30:28.445 1170 krsm.c
Managed Recovery: Initialization posted.
*** 2012-07-08 21:30:28.445 64949 kcrr.c
Managed Standby Recovery not using Real Time Apply
*** 2012-07-08 21:30:39.833
Recovery target incarnation = 1, activation ID = -118713082
Influx buffer limit = 10000 min(50% x 191963, 10000)
Successfully allocated 7 recovery slaves
Using 158 overflow buffers per recovery slave
Start recovery at thread 1 ckpt scn 7982577982885 logseq 128945 block 2
*** 2012-07-08 21:30:40.784
Media Recovery add redo thread 1
*** 2012-07-08 21:30:40.784 1170 krsm.c
Managed Recovery: Active posted.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
*** 2012-07-08 21:30:40.940 64949 kcrr.c
Clearing online redo logfile 1 +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '+ORAREDO3/mks01p/mks01p_redo01b.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO3/mks01p/mks01p_redo01b.rdo
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-00312: online log 1 thread 1: '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-17503: ksfdopn:2 Failed to open file +ORAREDO1/mks01p/mks01p_redo01a.rdo
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
ORA-00349: failure obtaining block size for '+ORAREDO1/mks01p/mks01p_redo01a.rdo'
ORA-15001: diskgroup "ORAREDO1" does not exist or is not mounted
Error 349 creating/clearing online redo logfile 1
*** 2012-07-08 21:30:40.987 64949 kcrr.c
Clearing online redo logfile 1 complete
*** 2012-07-08 21:30:41.034 64949 kcrr.c
Media Recovery Waiting for thread 1 sequence 128945
*** 2012-07-08 21:30:41.050 64949 kcrr.c
Fetching gap sequence in thread 1, gap sequence 128945-128945
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:30:41.533 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:30:41.533 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:31:11.610
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:31:12.094 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:31:12.094 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:31:42.186
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:31:42.654 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:31:42.670 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:32:12.747
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:32:13.215 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:32:13.230 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:32:43.276
Redo shipping client performing standby login
OCISessionBegin failed -1
.. Detailed OCI error val is 1031 and errmsg is 'ORA-01031: insufficient privileges
*** 2012-07-08 21:32:43.759 64949 kcrr.c
Error 1031 received logging on to the standby
*** 2012-07-08 21:32:43.775 64949 kcrr.c
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privileges
*** 2012-07-08 21:33:13.821
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
i created new password fle on bith primary and standby database also.
Please help me to resolve this issue.

ORA-15001: diskgroup "ORAREDO3" does not exist or is not mounted
ORA-15001: diskgroup "ORAREDO3" does not exist or is not mountedhave you mentioned parameter LOG_FILE_NAME_CONVERT in standby when online redo log locations are different?
post from standby:-
SQL> select name, state From v$asm_diskgroup;
FAL[client, MRP0]: Error 1031 connecting to MKS01P_PRD for fetching gap sequence
ORA-01031: insufficient privilegesPost from primary & standby
SQL> select * from v$pwfile_users;
User Profile for 919131
919131
Handle:     919131
Status Level:     Newbie
Registered:     Mar 6, 2012
Total Posts:     16
Total Questions:     8 (8 unresolved)
OTN failed 100% to help you, then why you posted another question?
First close all your old answered threads and then better continue your updates in your thread.
Edited by: CKPT on Jul 9, 2012 11:45 AM

Missing timeline/sequence

Hi. I have recently started using Premiere Pro CC after being a previous CS user. After spending some time working on my first project in CC (and saving at regular intervals) I closed the project and went back into it the following day. When I did so, the Timeline / Sequence window was completely empty so it appears that all my work has been lost. I have seen at least one other person posting about a similar issue on here, but would welcome any ideas of how I might be able to get this back. Perhaps I'm missing something as I haven't used Premier Pro for some time. Is this a known issue?
Many thanks,
Phil

Richard
I actually managed to solve the issue by going into the autosave folder and opening up one of the autosaved versions of the project! Thanks for your reply though!

Missing Some Sequences Presets!!

Hi all,
I went to start a new sequence as per normal on start up when l noticed the list was shorter than usual (you know how you get used to how things should look and where you position the mouse to choose your usual preset) well my AVCHD, HDV, XD CAM HD & XD CAM EX are no longer in the list to choose from. l went to the directory and found the folder "Sequence Settings" and there they all are as should be including the ones that are not showing up on start up, l then went and deleted the PP Roaming file hoping that that had become mucked up in some way but that did not work either. I'm now at a loss as to what to do when the sequence presets are there but PP won't display them on start up.
PP version is 4.2.1 (003(M.C:166418)
Hope you can help please.
Simon Allan

Simon,
If you have CS4, one likely cause for this is a Bug, where the full-paid version reverts to the trial version. No one has ever come forth with a "why," but here is the "fix," should you encounter this in the future - hopefully the Repair Install HAS fixed things for you, but keep this handy, just in case.
Deactivate the program. This will likely be grayed out, since the trial is not Activated.
Uninstall PrPro.
Run the Adobe Clean Script (now up to CS5) several times, rebooting between.
As a precaution, maybe run a Registry cleaner, like CCleaner
Install PrPro completely, and immediately update fully, before using
Hope that you do not have this issue again and good luck,
Hunt

Offline/Missing Image Sequences in After Effects CS6 with Color Bars

I am working on a stop motion animation in After Effects CS6. Each clip has been imported as an image sequence from stills on my hard drive. When I open up After Effects, all image sequences now have color bars over them, as if they are offline. Trying to reload them does nothing. I cannot 'link media' because it isn't just one file; it's an image sequence so there are many of them.
I first noticed this when the color bars appeared in my dynamically linked comps inside of Premiere Pro. Everything played smoothly the first time I opened the project in Premiere CS6, after originating in CS5.5. Then the second time I opened up Premiere, the color bars appeared on the linked comps. I hadn't yet opened up my AE project in CS6 yet, so when I did, AE converted the project and I resaved it.
Any help related to this issue would be greatly appreciated.
Mid-2009 Macbook Pro
Mac OS X Mountain Lion
8GB RAM
Adobe Creative Suite Production Premium CS6 w/Creative Cloud

Thanks everyone, I think I'm beginning to solve this.
Rick, thanks for your advice. I tried this and it worked. The reason I didn't do this before is that, because it is stop motion, I couldn't remember how many frames I had imported for each sequence. For instance, if I shot 54 images and only imported 52 into the sequence, I wouldn't remember which 52 images to import...this might still be causing a problem, but I don't know yet. I think in most cases I imported all the images in a folder, so the image sequences should be fine.
I am having another problem, however. Even though the issue seems to be fixed in AE, it doesn't seem to be fixed in Premiere...each image sequence is dynamically linked from AE, but each dynamically linked comp is still being show with color bars as they did in AE...I think that maybe my Premiere project is still linking to the old CS5.5 AE project, and not the new one opened and saved in CS6...

Missing Bowse Sequence Editor

One of my users has requested a browse sequence, but I can't
find the Browse Sequence Editor. Another user had a similar problem
in 2004 and resolved the situation when she ran an update.
I checked for updates, but none were availalbe, so that's not
going to work for me. I tried to add a tool, but could not find the
.exe file. Any suggestions? Thanks. Charles Arnold

Hi Charles
I think Colum meant you should click the Tools menu item at
the top of the screen. Not the Tools tab at the bottom of the
RoboHelp Explorer pane.
Cheers... Rick

Sender FCC with unbounded RecordSet Structure produces Empty File

Hi Experts,
My scenario is File (FTP) to IDoc, using FCC on the sender.
The source file is a flat file representation of the IDoc e.g. with the segment names preceeding each record row.
FCC parameters are as follows:
RecordSet Name: Z1RECORDSETNAME
RecordSet Structure: EDI_DC,1,E1TPDLH,1,Z1TPI2H,1,E1TPACC,E1TPTRM,,E1EDT13,,E1TPDIH,1,Z1TPI2HD,1,E1TPNOT,*
RecordSet Sequence: Variable OR Ascending
.fieldFixedLengths
.fieldNames
.keyFieldValue
.endSeparator
.keyFieldInStructure
above parameters are used in all segments, except in E1TPNOT where ignoreRecordsetName is added
My issue is when the test file contains more than 1 value for the unbounded segments E1TPTRM, E1EDT13 (e.g. 3 row values for E1TPTRM and 2 row values for E1EDT13) the Content Conversion succesfully finishes but produces an Empty File (size = 0)
Does anyone know how to fix this issue? Am i missing something in the parameters to be able to support the current file structure?
Kindly share your ideas/solution
I've tried to edit the test file to have only 1 record value for the unbounded segments and it is succesfull and does not produce an empty file.

Try giving
EDI_DC,1,E1TPDLH,1,Z1TPI2H,1,E1TPACC,E1TPTRM, * ,E1EDT13, * ,E1TPDIH,1,Z1TPI2HD,1,E1TPNOT,*
I got it, i guess even you have given the astrix after E1TPTRM and E1EDT13 and it changed to bold.
Ok ignore my answer.

Re:Remove Recordset in FCC?

Hi All,
I am working on File to IDOC scenario where I am getting error in Sender File CC. I see the payload contains recordset where in my DT,MT I didnt mentioned any recordset in my strcuture:
DT is as below:
DT_DATA
--Row
Field1
Field2
In payload it shows as below:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_Data xmlns:ns="http://sap.com/interface">
- <Recordset>
- <Row>
<Field1>ZOR</Field1>
<Field2>2030009716</Field2>
In my FCC I have the following parameters:
Document Name MT_DATA
Document Name Space http://sap.com/interface
Document Offset             <BLANK>
Recordset Name              <BLANK>
Recordset Namespace    <BLANK>
Recordset Strcuture       Row,*
Recordset Sequence     Asending
Recordset per message    <BLANK>
KeyFiledName                  <BLANK>
KeyFieldType                 <BLANK>
How can I get rid of <Recordset> tag in payload???
Thanks
Rajeev

I see the payload contains recordset where in my DT,MT I didnt mentioned any recordset in my strcuture:
How can I get rid of <Recordset> tag in payload???
If not seen already have a read of this help section:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/6713ec3f914ddee10000000a1553f7/content.htm
From the above section:
u25CB       ignoreRecordsetName
A <Recordset> element is inserted in the XML structure for each recordset structure. This level is not always required, particularly
if the recordset only contains one structure definition.
If you set the parameter to true, the <Recordset> element is not inserted.
Regards,
Abhishek.

Sender FCC - missing files

An external systems sends TXT file of large size. The file will be read for every 500 sets and written to an XML file with timestamp in output folders..
My content conversion has following parameters:
Recordset name : DATA
Recordset structure: header,1, item,*
Recordset sequence: Variable
Recordset per message: 500
Key Fieldname: Rec-Type
Key Field type: String(case sensitive)
All the recordsets, each in packet of 500 are processed in XI successfuly WITHOUT any errors, though there are fewer number of output xml files generated. I see about 13 packets (of 500 messages each) in the XI mointor, but only 8 files are written to the folders.
The missing 5 messages on the XI mointor are shown with Queue status (green).
Appreciate any help.

Sarvesh,
I checked that tcode, i have following entry
Cl. Queue Name Entries Status TID of First LUW
100 XBTO6___0000 809 RUNNING A7AE9C8B042247B0B0471515
Will messages always be held in queue, is this a permanent solution?
Also,
i tried to activate the above queue and got following message "The queue is registered and therefore cannot be activated".

RecordSet Structure Sequence Variable in JMS like in File Adapter

Hi all,
We are having some problems trying to find how to implement the functionality of the variable recordset structure in a JMS adapter.
We do have a structure with this form:
HR - data
AR - data
AR - data
HR - data
The two first chars are the keyfield, and our comm channel is just ignoring the second occurence of the Header (HR).
In a File adapter, we would use the Recordset Sequence = Variable parameter but, is there anything similar for the JMS adapter?
Thanks in advance, Iñaki.

Hi Kamesh,
I believe it's a namespace issue, pls check namespace of your consumed message and one used in your transformation..should match.
Test your xslt separately (by including correct namespaces,especially in tag <element1> ... source in ur xslt)
Thanks,
Faiz

Missing "Recordset Sequence" in FCC

Similar Messages

Maybe you are looking for