Photoshop Elements 13: The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit.

Installed Photoshop Elements 13 on old computer in December, old computer crashed this week so had to purchase new computer. Attempted to install and received the following error message: The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit. What now???

Try Warning: "Adobe Genuine Software Validation Failure..." | Windows

Similar Messages

"Product you are trying to install is not genuine" - Adobe Application Manager error message.

Trying to launch the AAM and getting the error message that says "Adobe Genuine Software Validation Failure. The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit".
I've been subscribed to the creative cloud for four months, never had any trouble before, I'm not trying to download anything and nothing on this computer is counterfeit.
Any help?

Hello,
This behavior is due to a known issue (details at http://blogs.adobe.com/psirt/2012/09/security-advisory-adobe-to-revoke-code-signing-certif icate-apsa12-01-2.html). Fortunately, the solution is simple.
You need to download the latest version of Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773. After you install it, the error will go away.
Regards,
Amit

Keep getting message that the product I am trying to load is not an Adobe Genuine Product

I keep getting a message that says Installation failed. The product you are trying to load is not a Adobe Genuine Product and appears to be counterfeit!!!?? What do I do next? The products were purchased from Adobe

All;
I'm still working with Adobe; however, I may have a unique problem as
explained by Adobe Support: I purchased what is known
as a one user License of a Volume License from a supplier for a CS6
Upgrade from CS5. I had purchased the CS5 direct from Adobe and this is
considered to be a Retail version and not a Volume Licensed product. Adobe
says that you need to upgrade from a licensed version to a licensed
version. They provided me with a link and instructions to upgrade from my
retail version; however, so far it is not installing with the serial number
that was provided. I will contact Adobe next Tuesday after the holiday and
see if the problem can be resolved.
I don't know if this helps you or not. I will try to give you updates.
Regards;
Bob J.

,"The version of Adobe Flash Player ActiveX that you are trying to install is not the most current

I need help been trying to get flash on computer but is prompts me with this, I have downloaded this flash over and over again & uninstalled it too. Im not to sure what i have on my computer but i believe it to be window 7... My brother told me that flash can only be installed on the 32 bit IE, so i opened up the 32 IE and tried it there, but it still prompts me with this? I have read the other forums disscussion but i cant seem to follow. Please help!!
,"The version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version.
Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version."

I show this under this folder: C:\Windows\system32\Macromed\Flash or C:\Windows\syswow64\Macromed\Flash, does this help?
Start Main Section - Date=17/05/2010 (Monday)
Time=0:29:01
CreateDirectory: "C:\Windows\system32\Macromed\Flash" (1)
Call: 441
Safety Check
Call: 116
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\UserInfo.dll"
File: wrote 4096 to "C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\UserInfo.dll"
CheckAdminPermissions Name = Nixon
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\UserInfo.dll"
File: skipped: "C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\UserInfo.dll" (overwriteflag=1)
CheckAdminPermissions Account Type = Admin
Jump: 148
Call: 148
Call: 74
GetWindowsVersion -
CheckSupportedPlatform - OS=
Call: 447
CheckFPPermissions
Call: 74
GetWindowsVersion -
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\fpinstall.dll"
File: wrote 8704 to "C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\fpinstall.dll"
ObjectExistsAndIsOwnedBySomeoneElse = 0
Jump: 490
MessageBox: 12582960,"The version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version.
Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version."
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\NSISArray.dll"
File: wrote 17920 to "C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\NSISArray.dll"
Delete: DeleteFile("C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\fpinstall.dll")
Delete: DeleteFile("C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\NSISArray.dll")
Delete: DeleteFile("C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\System.dll")
Delete: DeleteFile("C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\UserInfo.dll")
RMDir: RemoveDirectory("C:\Users\Nixon\AppData\Local\Temp\nso66D0.tmp\")

The item you are trying to edit has not yet been processed by iTunes Match

"The item you are trying to edit has not yet been processed by iTunes Match and any changes you make could be lost. Are you sure you wish to continue to edit information?"
How long is this supposed to take? I have some tracks that haven't been "processed" for days now.

I had this same problem. It was driving me crazy and I finally figured it out. On my main computer, I keep an actual file for of all my music. None of it lives solely in the cloud. However, on all my other iTunes Match devices, I stream all my music from the cloud (which includes songs I've purchased from iTunes as well as ones I've imported myself). One song in particular was stuck in limbo with the exact message you wrote. This particular song is not available in the iTunes Music Store. I didn't want to delete the file and reimport it because I like keeping all my play count and date added info. My other devices linked to my iTunes Match account knew that the song existed, but it could never actually play this particular song. I'd always get an error message.
Here's the solution: On another computer that's linked to your iTunes Match, delete the song. It will only ask you if you want to delete it from iCloud as the song file doesn't actually live on that computer. If you say yes, on the original computer where the song file lives, you'll now see the song file has a cloud icon with the X in it. From there, you can control-click on the song file and select, Add to iCloud. Then, it will add it to iCloud and will no longer be stuck "processing."

The version of Adobe Flash Player ActiveX that you are trying to install is not the most current v

I'm installing Flash Player on my Windows 7 64-bit OS using IE 8 32-bit. The installation terminates and the log file contains the following. (Please note, this log file was in "C:\Windows\SysWOW64\Macromed\Flash"). Flash player (32-bit) has been working, but just currently quit working. Advise please.
Start Main Section - Date=13/05/2010 (Thursday)
Time=8:14:27
CreateDirectory: "C:\Windows\system32\Macromed\Flash" (1)
Call: 441
Safety Check
Call: 116
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll"
File: wrote 4096 to "C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll"
CheckAdminPermissions Name = Rich
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll"
File: skipped: "C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll" (overwriteflag=1)
CheckAdminPermissions Account Type = Admin
Jump: 148
Call: 148
Call: 74
GetWindowsVersion -
CheckSupportedPlatform - OS=
Call: 447
CheckFPPermissions
Call: 74
GetWindowsVersion -
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\fpinstall.dll"
File: wrote 8704 to "C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\fpinstall.dll"
ObjectExistsAndIsOwnedBySomeoneElse = 0
Jump: 490
MessageBox: 12582960,"The version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version.
Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version."
Delete: DeleteFile("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\fpinstall.dll")
Delete: DeleteFile("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\System.dll")
Delete: DeleteFile("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll")
RMDir: RemoveDirectory("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\")

That's a good question. I may have installed FP 10.1 Beta in many of the attempts to resolve the issue. I've scanned my registry for any reference to Flash and removed anything that remotely resembles Flash Player (of course backing up Registry first). I've run uninstall_flash_player.exe, which doesn't appear to do anything. I've checked logs and there's no reference to Flash Player being installed.
When I go to the link provided ( http://www.adobe.com/software/flash/about/) I get the messageThe version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version. Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version. and when I look at the log (install.log) I see an attempt to install Flash Player. Here's the most recent log file:
Start Main Section - Date=14/05/2010 (Friday)
Time=7:02:52
CreateDirectory: "C:\Windows\system32\Macromed\Flash" (1)
Call: 441
Safety Check
Call: 116
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll"
File: wrote 4096 to "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll"
CheckAdminPermissions Name = developer
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll"
File: skipped: "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll" (overwriteflag=1)
CheckAdminPermissions Account Type = Admin
Jump: 148
Call: 148
Call: 74
GetWindowsVersion -
CheckSupportedPlatform - OS=
Call: 447
CheckFPPermissions
Call: 74
GetWindowsVersion -
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\fpinstall.dll"
File: wrote 8704 to "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\fpinstall.dll"
ObjectExistsAndIsOwnedBySomeoneElse = 0
Jump: 490
MessageBox: 12582960,"The version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version.
Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version."
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\NSISArray.dll"
File: wrote 17920 to "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\NSISArray.dll"
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\fpinstall.dll")
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\NSISArray.dll")
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\System.dll")
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll")
RMDir: RemoveDirectory("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\")

IE Error: "The content you are trying to view is not supported in the current Document Mode..."

My Captivate 7 project (HTML5) runs just fine on my computer in IE11. My client tried to run it from IE9 and got the following error:
"The content you are trying to view is not supported in the current Document Mode of Internet Explorer. Change the Document Mode to Internet Explorer 9 Standards and try to view the content again. To change the Document Mode, press F12, Click Document Mode:, and then select Internet Explorer 9 Standards."
My guess is that they're running it over their LAN, and IE is subsequently running in quirks mode.
I've changed the metadata in index_SCORM.html from
<meta http-equiv="x-ua-compatible" content="IE=10">
to
<meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1">
we'll see if that fixes it....

TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

HT5581 Somehow my QuickTime player is no longer. I tried to download it again and it keeps telling me that the feature you are trying to install is on a network resourse that is unavailable. What does that mean to a novice like myself?

For some reason my Quick Time player no longer works or even show up in my programs list. I tried downloading it again and the message I get is "The feature you are trying to install is on a network resourse that is unavailable." It somehow is gone and I don't understand why. I am a novice so any help should be simple for me to understand. Thank you.

Try one of the links here:
http://support.apple.com/downloads/#quicktime%20windows

The version that you are trying to install is not the most current version

I have multiple snapshots of this one. I am trying to install Adobe Flash Player on a Windows7 64bit machine from adobe.com. I keep getting the following error:
The version of Adobe Flash Player ActiveX that you are trying to install is not the most current version. Please visit (adobewebsite) to obtain the latest, most secure version.
This is the message that I am getting from Adobe.com website!
I tried uninstalling multiple times + reinstalling, same error. I tried offline installing, same error (is not the most current version).
Help?

Hi, It may be helpful if you read over this troubleshooting guide by Adobe.
http://kb2.adobe.com/cps/191/tn_19166.html
If you decide to Uninstall and Install again, I would use the "executable" which you can download to your Desktop.
Have you previously installed any beta version? I'm sure you know you need to use the 32bit browser since Flash Player
is not supported on the 64bit.
The Anti-Virus/Firewall, Security Settings for IE, Permission requirement are important. Also the necessity of Rebooting twice after the Uninstall for IE, to make sure old files are removed.
If you have any questions, just post back.
Thanks,
eidnolb

Downloaded mavericks and now receive an error "the version of the server you are trying to connect is not supported" However I don't have a server I have a storage unit. How do I re-establish the connection

I downloaded Mavericks and I now receive an error when I try to connect to my storage unit. I receive an error message that the 'server is not supported'. How do I correct this? Or how can I restore my previous operation system

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

"The person you are trying to reach...."

Whenever people try to call me, they often receive the following automated message, "The person you are trying to reach is not accepting calls at this time. Please try your call again later." The message is repeated in Spanish, and then an error code is given: 24GA01GN.
This happens even when my phone is turned on and receiving a good signal.
Any ideas what is causing this and how to fix it?

DannyD wrote:
Thanks for this suggestion. How do I access Parental Controls? Is that something I change on the handset? Or via accessing my Verizon on-line account settings?
Thanks,
Danny
Hi there! You can click here to access Usage Controls and use the 'Sign In' link to view the parental controls settings. If you do not have the controls set up, please PM me directly so I can help you directly to get the incoming call issue resolved.
Thank you! Have a great weekend!

I am trying to uninstall itunes as it will not open error 7 (windows 126) so that I can reinstall but keep getting the message.. The feature you are trying to remove is on a network resource that is unavailable itunes.msi... Any suggestions anyone

I was unable to open iTunes and got a message error 7 (windows 126) so I tried to uninstall and download latest itunes 10. When I tried to remove old version of itunes I got the message... The feature you are trying to remove is on a network resource that is unavailable and when I try to download iTunes 10 the message reads.... The installation source for this product is not aailable. Verify that the source exists and that you can access it. Can anyone help?

A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time?

I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

I just found a way to get Fixit to Run. Go to http://support.microsoft.com/fixit/ and then pick "Install or upgrade software or hardware" and run Fixit from the "Run" button on the webpage. I just picked run, instead of save, and ran it directly from the web page for each of the apple software. If the window doesn't come up full size, hit "Tab" twice and then "Return". You'll be able to see the prompts from there. Have it attempt to uninstall iTunes on its own. Repeat the process for any of the other Apple products, including Bonjour and iCloud. Then, go to the iTunes website and install from there. I had a downloaded copy and installed from there, but it came up with an error about missing the apple help, or something like that. It allowed me to uninstall, and I reinstalled direclty from the website, and it all works now.

When I try to update itunes, I get the following: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box..

When I try to update itunes, I get the following: The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box below.
This leads me to another dialog box that says: The file .......is not a valid installation package for the product iTunes. Try to find the installation package iTunes64.msi in a folder from which you can install iTunes.
That doesn't work either. What to do?
Dean

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

"The version of the Player that you are trying to install is lower than what is currently installed" when installing 14.0.0.176

I've been deploying flash updates thru SCCM for a long time using the MSI. With this update, many computers updated successfully, but about 200+ of them failed. Each computer I have looked at has the message "Product: Adobe Flash Player 14 ActiveX -- The version of the Player that you are trying to install is lower than what is currently installed." in event viewer. Attempting a manual install of the MSI produces a similar interactive message. The current installed version is definitely older than the one I am attempting to install. I am only able to re-mediate by manually uninstalling, and then installing 14.0.0.176. I could script and deploy an uninstaller, but I would rather the bug with the MSI be fixed.

Dear María,
Finally, I have been able to reproduce the error, both in ActiveX and plugin installers updating from version 15.0.0.246.
Here you have the logs:
ACTIVEX
=== Verbose logging started: 18/12/2014 16:12:54 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (E0:1C) [16:12:54:137]: Resetting cached policy values
MSI (c) (E0:1C) [16:12:54:137]: Machine policy value 'Debug' is 0
MSI (c) (E0:1C) [16:12:54:137]: ******* RunEngine:
           ******* Product: install_flash_player_16_active_x.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (E0:1C) [16:12:54:138]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:1C) [16:12:54:138]: Grabbed execution mutex.
MSI (c) (E0:1C) [16:12:54:155]: Cloaking enabled.
MSI (c) (E0:1C) [16:12:54:155]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:1C) [16:12:54:158]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:162]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_active_x.msi
MSI (s) (30:E4) [16:12:54:162]: Grabbed execution mutex.
MSI (s) (30:4C) [16:12:54:163]: Resetting cached policy values
MSI (s) (30:4C) [16:12:54:163]: Machine policy value 'Debug' is 0
MSI (s) (30:4C) [16:12:54:163]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\install_flash_player_16_active_x.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (30:4C) [16:12:54:163]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_active_x.msi 3: -2147287038
MSI (s) (30:4C) [16:12:54:164]: MainEngineThread is returning 2
MSI (s) (30:E4) [16:12:54:177]: User policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:E4) [16:12:54:178]: Restoring environment variables
MSI (c) (E0:1C) [16:12:54:188]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:1C) [16:12:54:188]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:12:54 ===
PLUGIN
=== Verbose logging started: 18/12/2014 16:15:40 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (28:44) [16:15:40:364]: Resetting cached policy values
MSI (c) (28:44) [16:15:40:364]: Machine policy value 'Debug' is 0
MSI (c) (28:44) [16:15:40:364]: ******* RunEngine:
           ******* Product: install_flash_player_16_plugin.msi
           ******* Action:
           ******* CommandLine: **********
MSI (c) (28:44) [16:15:40:364]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (28:44) [16:15:40:364]: Grabbed execution mutex.
MSI (c) (28:44) [16:15:40:384]: Cloaking enabled.
MSI (c) (28:44) [16:15:40:384]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (28:44) [16:15:40:384]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:384]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_plugin.msi
MSI (s) (30:2C) [16:15:40:384]: Grabbed execution mutex.
MSI (s) (30:3C) [16:15:40:384]: Resetting cached policy values
MSI (s) (30:3C) [16:15:40:384]: Machine policy value 'Debug' is 0
MSI (s) (30:3C) [16:15:40:384]: ******* RunEngine:
           ******* Product: C:\WINDOWS\system32\install_flash_player_16_plugin.msi
           ******* Action:
           ******* CommandLine: **********
MSI (s) (30:3C) [16:15:40:384]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_plugin.msi 3: -2147287038
MSI (s) (30:3C) [16:15:40:384]: MainEngineThread is returning 2
MSI (s) (30:2C) [16:15:40:404]: User policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:2C) [16:15:40:404]: Restoring environment variables
MSI (c) (28:44) [16:15:40:414]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (28:44) [16:15:40:414]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:15:40 ===

Photoshop Elements 13: The product you are trying to install is not an Adobe Genuine Software and appears to be counterfeit.

Similar Messages

Maybe you are looking for