Missing Some Audio Tracks from Premeire Queue'd videos

Hi I am useing Premeire CC 2014 to Queue some videos that have 4-8 tracks of audio. They play fine in Premeire. When I Queue the clips in AME CC 2014 and then render them with a H264 codec transcode, I am only getting the last track (Music) in the outputted video. I am missing the voice over tracks.
Not sure why this is happening? Any suggestions. I am using the Audio Track Mixer with Submixes and effects on the Submix in Premiere. Perhaps there is an issue with this.
Thanks
DB

It can be done with QuickTime Pro
<http://store.apple.com/us/product/D3380Z/A>
"Show Movie Properties" in "Window" menu, detete the unwanted track, then "Save" in "File" menu.
You may need to install Perian
<http://www.perian.org>

Similar Messages

Is there an easy way to remove audio track from .mp4

Guys
Wondered if anybody knows of a way to take a .mp4 file with a silent audio track exported and remove that audio track altogether without having to reconvert the video in AME- just deleting the (silent) audio track
Have lots of files that need this and was looking for a way to do this without going back and reexporting all the clips the hard way
Any thoughts much appreciated-- (I have access to both Windows 7 and WIndows XP pro 64 bit)
Thanks
Tony

Thanks Jim
I figured that would work but for some reason the resulting files did not play correctly--Alternatively I used Mpegstreamclip -opened the video I wanted to erase audio track from--- clicked on "edit--delete audio track" then clicked "save as" and this finally accomplished what I was trying to do--Now have a copy of the .mp4 file wo audio
Thanks for all your help--Hope this thread helps someone in the future
Peace
Tony

Some audio tracks bumped out of sync

I recently discovered that some audio tracks have been bumped out of sync starting at one point in my timeline, and there doesn't seem to be any consistency to it–stereo tracks have shifted so that one track starts early while the other is in sync, others start together but have been bumped, while all of the video seems to be correctly placed, and some audio is still in sync. This has happened on various audio tracks and with varying degrees. Any clues on how could this have happened? Could it be from insert edits? I use them all the time and never had any problems like this before. Please help!

This can easily happen if you audio and video tracks are not linked. (Apple L toggles linking on and off) When they are linked it's difficult to inadvertently bump the picture or audio track out of sync.
As for the stereo tracks. The only way to bump them out of sync is if they were, at some point, not stereo tracks. (Option L toggles stereo) And even that should rectify itself when they get made into stereo tracks again.
I say "should" because I've had stereo tracks of unequal lengths show up a few times and have never been able to figure out how it happened. I do know that if you don't fix them they can play havoc with the audio if you export the sequence to QT.
rh

How to extract one of several audio tracks from a .vob file?

Hi guys,
hope you can help me, i'm looking for a solution for hours now but can't find one.
I would like to know how to extract one audio track from a .vob file when there are different tracks/languages on the dvd? Media encoder does it very well, but i can't find the option for choosing the right audio track/language for extraction. Please help
Kind regards
Alex

This is because the OMF specification requires mono audio files
It really depends on what you are trying to do with the two tracks as to the best answer as far as 'grouping'
You could select all the clips on both tracks and right mouse click and select 'group'
You could send both tracks to a bus
You could export the two tracks to a stereo file and bring that back into the session
Lots more things I'm sure but a little more detail as to what you are trying to do would help

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR

I just loaded Audition, but when I try to edit an audio track from Captivate the "edit in adobe audi

I just loaded Audition, and already had Captivate on my computer. I'm trying to edit an audio track from Captivate, so I go to Audio>Edit>Slide. But, the window that comes up does not have the "Edit in Audition" button activated. The button is faint, thus doesn't work. How do I sync these two programs so I can edit a Captivate Audio file in Audition?

From the captivate help file:
You can use Adobe Audition to edit audio when you want to go beyond the audio editing options available in Adobe Captivate. For example, to apply filters or remove noise, you need an advanced audio editor such as Adobe Audition. You can either edit the audio files from slides or batch process by opening multiple files in Adobe Audition using the Library panel.
The changes reflect in Adobe Captivate library and the associated slides where the audio files are being used. The saved files are reimported to Adobe Captivate with the slide associations intact.
Note: This feature is available only in Adobe Captivate that is installed as a part of Adobe eLearning Suite.
I think that the last line probably answers your question....

Audio Tracks from Concert DVD's

Is it possible to rip the audio track from a commercially available concert DVD to an MP3 format for play within itunes (audio only)?....if not able to do it in itunes, can it be done in imovie and the audio track converted to MP3?
Thanks in advance for any help anyone can provide.
Bill

It appears to cost $16 dollars.
http://www.rogueamoeba.com/audiohijack/
I'm not associated with the company in any way. I've just been a happy customer of theirs for years.

Importing multiple audio tracks from FCE HD

On page 22 of the FCE HD manual it says of importing Quicktime movies "...new audio tracks are added below the video track for EACH audio track in the movie". This does not seem to be the case when I import movies exported for Soundtrack. Is the manual wrong, or is it me?
Sorry if this is a FAQ, I've tried a lot of searches and I can't find anything.
G4 Mac OS X (10.4.7) 832 MB Ram, ATI Radeon 7000, Mercury Elite 1 Ghz

Ok - I'm back again. I've been fooling around a bit with this and this is what I have come up with. ST only allows 1 track in at a time. Multitracks of audio from FCE are flattened down which makes it impossible to tweak them individually in ST. I turned the link button off in FCE and exported the audio tracks one at a time. Each track you bring into ST has to be opened in a new ST project file. Then you can tweak them and export them out of ST, and bring them back into FCE.
My opinion however is that ST is such a weak and watered down verion of STP that it is actually better and more time efficient to use the audio tools in FCE to fix your audio problems and do your mix. Sure, if you have STP its a great program - but ST has none of the power tools that its big rother STP has. You are much better using FCE.

Workflow Suggestions for Getting Multiple Audio Tracks From Drum Machine

My goal is to make separate audio tracks from the MIDI output coming out of a hardware Boss DR-880 drum machine. It has nice drum samples that I would like to use. So far, I know how to split the output by MIDI notes as to create multiple tracks. I end up with a about 10 tracks which are all MIDI of course. What I want to do is end up with all audio tracks. This way I can set the levels and EQ to taste for each part of the drum kit.
What's the most straightforward way to achieve this goal? I tried bouncing in place but that only works for plugins -it's grayed-out for the post note split generated MID tracks. I also found a post on this forum with what I think is similar question but it's closed and the question was not clearly answered for a newbie like me.
So far I can do this:
1. Record the MIDI output from the drum machine to an External MIDI track.
2. I then split the MIDI track by note to get multiple MIDI tracks.
3. To get audio I play each track individually e.g., just the kick drum and record the audio coming
out of the drum machine into an audio track.
This is a huge pain since I have on average about 10 MIDI tracks! There has to be a better way, right?
Thanks!

hi there:
ok now when u want to do such a thing which i totally understand what u are trying to do !so u have these options L
1- u should have a mixer to feed it with all your outputs from outboard gears like drum machines ,samplers etc...coz what u like in your dr-880 is the character of its sound and trust me if i tell you even if u tried to sample it and put it into any sampler software ,it will have the same sound but not the same character ! so thats why we still have samplers and out board gears and they will be still manufactured coz of that reason ...so for example i use my akai s6000 sampler which it has 16 outputs direct to my mixer so i can do what ever i want midi wise and audio wise with out any pain ,coz even if i have the same samples into my whatever sampler software i will never have the color and the character of the sound coming out from my akai ...and i use a drum machine which it has 10 outs as well and all is playing in sync in real trime with my audio tracks inside my logic ...this is the best solution !but i think u dont have that solution but u have to think about it if u bring a good console..!
2- you don't have to divide your midi from your machine you just do what ever its need to be done and when u finish record them one by one into your logic or 2 by 2 or what ever but in this case u cant control the midi of it anymore
but you gonna pain to do that every time coz sometime u dont have much time to think about u have to record the sound before any mix down!but it will work for you
3- make samples by your own of your drum machine and use esx24 to play them !but again you gonna lose the character of your sound but still having the same sounds u want ( if u know how do make a good samples).
i hope this tips gonna be useful for you .
cheers..!:)

Audio track from EXTERNAL midi

Hi,
Logic 9 doesn't seem to allow me to create an audio track from an External midi instrument. If I'm wrong, how do I accomplish the task?

Hi Spheric, and thanks for your input.
It seems that Logic 9 treats External midi and Internal midi differently. I brought this up at a One-to-One session and
1) we had to change Preferences/Audio/to "Slow (CPU saving) in order to Solo the external midi track, and
2) the track would not transfer to the Audio track that I set up, even at this slower CPU setting.
I've read other complaints about this on the Net - but with no answer yet.
I appreciate your getting back to me,
Paulie too

2nd Audio track from merged .m4v files does not play on iPod Touch

I used Handbrake to encode two .m4v files of a concert DVD that spans two DVDs. I then took those two files and combined them into Quicktime Pro to create a single .m4v file. The file plays fine in QT but when I transfer the file to my ipod, only the first audio track (from the first file) plays. Once the video from the second file plays, the audio is silent. Here's what the movie properties look like:
Enabled Name Start Time Duration Format
====================================================
Y Video Track -- 0:00:00:00 -- 2:21:53:90 -- H.264
Y Audio Track1 -- 0:00:00:00 -- 2:21:53:90 -- AAC
Y Audio Track2 -- 1:27:28:87 -- 0:54:24:02 -- AAC
N Text Track -- 0:00:00:00 -- 2:21:53:90 -- Text
Any suggestions?
Thanks,
Dan

So basically, anytime I combine more than one mp4 file in QT7 Pro, it will always create multiple audio tracks when doing a simple "save as" (vs. export as)
Not exactly. QT has it own set of rules. As you noted, the video track had no problem merging into a single track. This would not have happened if you had merged video compressed differently or added an image/stretched image sequence. Not knowing your specific work flow or settings, I hesitate to make any claims here. Frankly, when merging audio, I normally prefer to use GarageBand when I want to create a single master audio track and still retain control of the other tracks for mixing purposes. However, I could just as well have exported the audio in the original file using QT Pro to a single audio file and used that audio track to replace both original tracks keeping both the original video and chapter tracks. It is all a matter of which work flow you consider easiest for a particular job or project.
If I've exported out my chapter file as a plain text file, how do I go about reintegrating that withing the final mp4 file using QT?
http://www.apple.com/quicktime/tutorials/chaptertracks.html
The above link is a somewhat old tutorial explaining how to create a chapter text track from scratch. Since you already have the chapter track, just refer to the steps indicating how to add the text file back to your main movie file. (Ignore the step that says to set a "Preload" option as this pop-up has been removed.)

Replacing an audio track without re-encoding the video

I'm new to Audition CC so apologies for the basic question. I originally asked this in the Premiere Pro forum but I think it's more an Audition question.. I have AVCHD home video (MTS video with AC3 stereo audio) and have found I can clean up the audio, for example in speeches, very well in Audition. Is there a way to just replace the MTS's orginal audio track without re-encoding the video (which it seems I have to, if I do this via Premiere Pro)? In some cases the videos are poorly lit and any re-encoding makes them look noticeably worse than the original. In any event the video does not need re-encoding, I just need to replace the audio. Maybe I need to export the cleaned-up audio from Audition and use some other program to replace the audio in the original MTS file? Is that called re-muxing? Thanks in advance for any help.

Thanks Bob and Ryclark.
Bob, our aim is to copy these videos onto USB sticks, for our family to watch on our various home TVs, from a media player such as WD Home TV, a media PC or a laptop via HDMI cable. I expect the original MTS files, with cleaned up audio, will be fine. Media Info shows these to be video: AVC format, variable bit rate, 16.0 max bit rate, 1920x1080 pixels, 25.000 fps, 8 bit, interlaced; audio: AC3 format, 256 Kbps bit rate, 2 channels, 48.0 KHz sampling rate, 16 bits bit depth. I'm keen to avoid re-encoding the video, and it seems I can. My initial test worked and tonight (I'm in Australia) I'll test further... I can edit the AC3 audio in Audition, export it as a new AC3 with the same format as original, then use some other non-Adobe program to replace the original audio track with the new one, without touching the video.
Ryclark, I believe you are right. My novice-level understanding is that the process of separating the components of a video file such as my MTS file (video, audio and possibly others) into separate files is 'de-muxing' and putting them back together is re-muxing. Audition can save or export the original or edited audio track of my MTS file to a separate file so I assume that's like a specific audio de-mux. However I don't think Adobe products can re-mux without re-encoding the video (slow, larger resulting file size, worse video quality!), so I need some other program to replace my MTS file's audio with the new/edited audio.
So far I've found the free-ware Avidemux can do it but past experience is that free-ware can be a bit flaky or over time not as bullet-proof as a good/proven commercial product, so I'll look a bit further - or does someone in this forum know of such a product? HD Video Converter seems to be an option but it looks a bit amateurish.
By the way, if anyone is after a cut/join program to remove unwanted parts of a video without re-encoding the whole thing (ie. fast, same file size and unchanged video quality) I found Avidemux (free) only works on whole frames (GOP?) and the joins can have a little 'flick', whereas for $40-$50 a program like Fame Ring Smart Cutter for MTS videos (the Sony vidcam home video files I'm interested in) is frame accurate (it only re-encodes around the cut points) and works very well (smooth cut/join points). Smart Cutter doesn't do AVI videos (for my PC screen-recording videos) but I found SolveigMM Video Splitter Home Edition works well with those (not so well with my MTS files).

CS4 What stops audio from being moved to some audio tracks?

I find in some cases a snippet of audio that would fit easily into what at least appears to be empty track above it, will not go there. Instead what looks something like the little magnet icons... (only verticle) .. appears at the cursor and the audio will not be moved up.
I'm trying to conserve tracks a bit since I've hogged up 5 audio and 3 video. I don't like having some stuff out of site while editing if possible nor do I like making the stuff above the timeline so tiny or buried. I'd like to use what appears to be empty audio track where possible
Is there a setting the will allow me to move audio as I please?

Ahh, that it explains it then... thanks
Harry,
Those Audio Track type/Audio file type mis-matches have tripped up many.
Management of Tracks, both Video and Audio, can be a bit of alchemy, and a bit of art. One can do a lot about locating them, but one feature that PrPro does not yet have is Track dragging.
There is a thread from about 6 mos. back that goes into some of the details of Track management. Throughout that thread, there are complaints about no Track-dragging, but if you ignore those, one can get the step-by-step on doing it "the PrPro way." If I can find it, I'll link to it.
Good luck,
Hunt

Missing one audio channel from MXF video

Greetings,
I have a bunch of footage shot with a Canon XF300 camera. Two wireless lav mics were feeding into the camera. On the day, I was monitoring audio and am 100% certain that it was recorded correctly. I found a couple of unerased CF cards from the shoot and was able to verify that the audio is good when I pop the CF card into the camera.
However, when I transfer the footage to hard disk and attempt to play it out using either Premier Pro CS5, or VLC, I'm losing channel one of the audio. I've been attempting to troubleshoot, and have found a couple of references on the Web regarding missing audio channel 1 from MXF video files -- but nothing that is relevant to this situation.
I'm on Mac OS X 10.6.6 and am running Premiere Pro CS5 5.0.3. No video cards.
I've tried bringing the files in using: Finder, XF Utility and ShotPutPro. I'm copying the complete directory structure in all cases.
Has anyone seen this problem before? Any troubleshooting thoughts?
Thanks,
Cameron

It turns out that the MXF files are coming in with 2 mono audio tracks, and for some reason, in the clip viewer, one of the audio tracks doesn't play, but if you move the clip to the timeline, both audio channels can be heard. Ran into the same issue with Cineform encoded material coming in with two mono audio tracks. So I'm going to file a bug report.
Ah, OK... now I understand. No need to file a bug report; maybe a feature request, but a bug report isn't necessary. Here's why:
When you bring in clips with mono channels, by default, you only hear the first mono channel when playing back in the Source Monitor. If you toggle over to Audio Waveform view (click the Output button), you can select which of the channels (called "Tracks" which is a little silly, frankly) you want to monitor. Here's what this looks like:
This applies to any format that has mono channels. If you interpret the footage to stereo (you must do this before you use it in a sequence), you can listen to both channels at once. Of course, then you have to deal with the audio as stereo, which is not always what you want. That's why I do a lot of my editing with MXF material (primarily P2) that has multiple mic sources in a sequence, where I can monitor more than one source channel.
In any event, that's why this isn't really a bug; it might be a poor design decision, but it's otherwise working correctly. I'd definitely suggest making a feature request for a "Mixed" or "Plus" audio source option in the Source Monitor. I'm going to do the same.
Anyway, I hope that helps explain the issue. Good luck!

Questions on sending audio tracks from a short film into Audition for mastering

Ok so basically I have a 4 minute film in which i need to master the audio. I have a few quesions as to how to best go about this.
1: Some of the clips came with 2 tracks off the camera yet they are both labeled channel 1 on the beginning of the clip on the timeline. Their properties are listed as follows:
Type: Windows WAVE audio file
File Size: 16.0 MB
Source Audio Format: 48000 Hz - 24 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:58:09344
Why are there 2 tracks?
2: Some other audio tracks are just labeled on the timeline as L and R. Both these and the other ones labeled Ch 1 are synced with Pluraleyes from an H4N Zoom recorder so i have no clue why they are labeled different. These one have properties labeled as such:
Type: MPEG Movie
File Size: 69.5 MB
Image Size: 1920 x 1080
Frame Rate: 23.976
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:14:20
Pixel Aspect Ratio: 1.0 (1.0)
Yes those are audio files on the timeline.
3: What is the general scoops with these multi track audio files? Do I need both tracks?
4: What would be the best workflow to export all the audio clips into Audition and get them back in the timeline? I heard about importing then in Premiere clicking Undo so you don't have the audio track clips as "Audio Extracted" and you retain the originals, but then just replace them with the Audition audio.
Working with sound is not yet a strong point of mine, i am just a video editor but need to get a grasp on properly handling this.

Cameras although they can record stereo audio often only use a small mono gun mic mounted on the camera. The audio menus on the camera give you the option to record either the mono mic to both tracks (ie. Ch1 input to the camrea is fed to both) or as stereo tracks from a stereo mic or as split tracks with onboard mic via Ch1 to track 1 and, say, a radio mic fed via Ch2 to track 2.
Your first files sound as if they came from the first of those options from an onboard mono mic. You don't necessarily need both trakc as they are identical mono tracks in this case.
The second set of tracks were recorded as a stereo pair on the Zoom, hence L and R. They could be stereo or more likely again are double mono tracks where you will only need one of them.
However, depending on the project, it may be more convenient to keep both tracks if any stereo music or effects are going to be mixed in on the multitrack. The final edited video will probably have two tracks on it anyway even if all the audio content is mono.

Missing Some Audio Tracks from Premeire Queue'd videos

Similar Messages

Maybe you are looking for