Mkfontdir and mkfontscale: command not found

Hi,
I think that I did a dirty system upgrade. I reinstalled xorg, xorg server several times and I get always the same error when I arrive at the point of installing the fonts.
E.g. pacman -S ttf-ms-fonts
I get the following errors:
mkfontscale: command not found
mkfontdir: : command not found
Previously I had also the error: fc-cache: command not found
this one was solved by I installed fontconfig
What else should I install to get the mkfontdir and mkfontscale commands?
Thank you very much for letting me know.

Thank you, the commands now work, but xorg complains again about fonts, it says that it can't find the "fixed" font.
I installed (and re-installed with the -f option) the 75dpi, 100dpi and misc fonts, but nothing changed
I reinstalled all the xorg packages, by using the command pacman -Sf xorg xorg-server etc. (I found a list in the wiki) but still the same problem...
Do you know an effective way (don't tell me to reformat and re-install, we are not talking about Windows here...) to re-install all the xorg components (fonts included) even if pacman sees them as already installed?
I already did pacman -Su but nothing changed...
Thanks for some hints... I will ask in the meanwhile also in another area of the forum about pacman...

Similar Messages

Xorg: module "glx" and commands not found???

Hello, all.
I'm fairly new to Linux but I'm not a total noob. I have FC6 on my laptop and am currently trying to get a GUI working for Arch on my desktop.
I pacman-ed hwd, and ran it to create a Xorg.conf, and upon running it I get the following errors:
(EE) Failed to load module "glx" (module does not exist, 0)
/etc/X11/xinit/xinitrc: line 28: twm: command not found
/etc/X11/xinit/xinitrc: line 29: xclock: command not found
/etc/X11/xinit/xinitrc: line 30: xterm: command not found
/etc/X11/xinit/xinitrc: line 31: xterm: command not found
/etc/X11/xinit/xinitrc: line 32: exec: xterm: not found
waiting for X server to shut down FreeFontPath: FPE "/usr/share/fonts/misc:unscaled" refcount is 2, should be 1; fixing.
The last comment it makes I know isn't critical, so I'm not worried about that. But I need help with the "glx" part and the commands not found.
Thanks in advance.

Did you installed libgl-dri? If not install it, and it will fix glx problems.
For the command not found, you need to create a ~/.xinitrc file. Before, you'll need to install the WM/DE that you want to use.
There is a sample file in the wiki: http://wiki.archlinux.org/index.php/Sta … ents_HOWTO

Type "purge" in Terminal and get: -bash: purge: command not found Is there another built-in command to clear memory leaks? want to clear memory periodically

I have 10.6.8. When I type "purge" in Terminal I get: -bash: purge: command not found Is there another built-in command to clear memory leaks? I have FreeMemory (works well) and considering FreeMemory Pro, to clear memory periodically, say every 20 minutes, or preferably when a threshold is reached, say when only 100MB is available.

To get purge to work you need to install Xcode from Optional Installs on the 10.6 install DVD. Also be sure you install CHUD Tools with it.
But running purge or anything like it is pointless if within a short period of time the VM just grows back again. Sounds like you need more RAM.
Where are the memory leaks? Just because the VM reaches a certain size doesn't necessarily mean it's from a memory leak.

[SOLVED] sudo and "command not found" problems

Ok, the problem I've got is this: sudo has suddenly started acting real strange. It can't find any programs. For example, if i type
sudo echo
It just goes
sudo: echo: command not found
And another problem I've got, is that as a regular user, it can't find programs in /sbin, or other "exotic" places. For example it can't find firefox, because it's not in /usr/bin or /bin, but in /opt/mozilla/bin.
Please, help me!
Last edited by mrpedroxx (2008-06-14 13:23:49)

sudo -V outputs this
Sudo version 1.6.9p15
$PATH outputs
bash: /usr/gnu/bin:/usr/local/bin:/bin:/usr/bin:.: No such file or directory
pacman -Q firefox outputs
firefox 2.0.0.7-1
Yeah, maybe I should update it anyway
And /var/log/errors.log does contain stuff about hard disks, but it's just me mounting my iPod and the Windows partition on my hd

Bash: xhost: command not found AND set DISPLAY environment varibale

Hi all, i have this issue, when i try to execute
-> xhost +amjad.iqbal.com
bash: xhost: command not found
-> DISPLAY = amjad.iqbal.com:0.0
-> export DISPLAY
after which if i start installation of oracle database 11g, it says display variable has not been set.
PLEASE HELP!

Hi,
when i try to execute "service vncserver status" o/p: unrecognised service
when i execute "ps -ef|grep vnc" o/p: root 1981 1700 1 11:30 tty1 00:00:00 grep vnc
and when i downloaded VNC and tried to install, it says "failed dependencies: libstdc++-libc6.2-2.so.3 is needed by vnc-4.1.3-1.i386"
to install i used command -- "rpm -ivh vnc-4_1_3-x86_linux.rpm"
because of which im not able to complete your steps and im not able to set display environment variable and my installation is not getting started.
Please advice

(Solved) fbsetbg: line 153: xmessage: command not found

Hello,
I'm trying to set background image for Fluxbox.
After typing fbsetbg command in xterm I get following error:
$ fbsetbg -f ~/.fluxbox/backgrounds/wallpaper.jpg
/usr/bin/fbsetbg: line 153: xmessage: command not found
The most common way to solve this (according to Internet) is to install xorg-apps, but there is no xmessage app under it.
# pacman -S xorg-apps
:: There are 37 members in group xorg-apps:
:: Repository extra
1) xorg-bdftopcf 2) xorg-iceauth 3) xorg-luit 4) xorg-mkfontdir
5) xorg-mkfontscale 6) xorg-sessreg 7) xorg-setxkbmap 8) xorg-smproxy
9) xorg-x11perf 10) xorg-xauth 11) xorg-xbacklight 12) xorg-xcmsdb
13) xorg-xcursorgen 14) xorg-xdpyinfo 15) xorg-xdriinfo 16) xorg-xev
17) xorg-xgamma 18) xorg-xhost 19) xorg-xinput 20) xorg-xkbcomp
21) xorg-xkbevd 22) xorg-xkbutils 23) xorg-xkill 24) xorg-xlsatoms
25) xorg-xlsclients 26) xorg-xmodmap 27) xorg-xpr 28) xorg-xprop
29) xorg-xrandr 30) xorg-xrdb 31) xorg-xrefresh 32) xorg-xset
33) xorg-xsetroot 34) xorg-xvinfo 35) xorg-xwd 36) xorg-xwininfo
37) xorg-xwud
Enter a selection (default=all):
I installed them any way, but it didn't help. Nether the reboot.
Is there a way to fix this?
Last edited by iedopadzert (2012-06-02 11:41:23)

$ pkgfile xmessage
extra/xorg-xmessage
/e:
See also the optional dependency of fluxbox:
$ pacman -Si fluxbox
Repository : extra
Name : fluxbox
Version : 1.3.2-1
Optional Deps : xorg-xmessage: for using the fbsetbg and fluxbox-generate_menu utilities
Last edited by xduugu (2012-06-02 11:41:30)

Command not found error while executing a shell script

Hello,
I am a newbie to linux.I am attaching the code which gives me following errors..
error list:
1. no such file or directory enviornemnt
2. command not found
3. ambiguous redirectline
Script
cd $HOME/wkdir
rm /tmp/*.log
# source environment
. ./env
# Run the install script to setup the database
# Configure SH account
sqlplus "/ as sysdba" <<! > /tmp/perflab_install.log 2>&1
grant connect, resource, dba to SH;
alter user sh account unlock;
# create the fetch_n_rows procedure
sqlplus "$PERFLAB_USER" <<! >> /tmp/perflab_install.log 2>&1
drop index sales_time_bix;
drop index sales_time_idx;
create index sales_time_idx on sales(time_id) compute statistics;
-- fetch_n_rows: fetches 'n' rows from the specified statement --
CREATE OR REPLACE PROCEDURE fetch_n_rows(
stmt VARCHAR,
name VARCHAR,
nexec NUMBER := 1,
nrows NUMBER := 0,
debug BOOLEAN := FALSE)
IS
-- Local variables
curs INTEGER := null;
rc INTEGER;
nexec_it INTEGER := 0;
nrows_it INTEGER;
BEGIN
dbms_application_info.set_module('DEMO', name);
WHILE (nexec_it < nexec)
LOOP
curs := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(curs, stmt, DBMS_SQL.NATIVE);
rc := DBMS_SQL.EXECUTE(curs);
nrows_it := 0;
LOOP
IF (dbms_sql.fetch_rows(curs) <= 0 OR (nrows <> 0 AND nrows_it = nrows
THEN
EXIT;
ELSE IF (debug = TRUE)
THEN
DBMS_OUTPUT.PUT_LINE(nrows_it);
END IF;
END IF;
nrows_it := nrows_it + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR(curs);
nexec_it := nexec_it + 1;
END LOOP;
dbms_application_info.set_module(null, null);
END fetch_n_rows;
show errors
# Start the workload
. ./start_workload.sh > /tmp/setup_perflab.log 2>&1
# Wait two minutes for workload to get going
sleep 120
# Modify snapshot interval
sqlplus -s /NOLOG <<EOF >> /tmp/setup_perflab.log 2>&1
connect / as sysdba
set head on
set feedback on;
set pagesize 40
rem -- event to allow setting very short Flushing interval
alter session set events '13508 trace name context forever, level 1';
rem -- change INTERVAL setting to 2 minutes
rem -- change RETENTION setting to 6 hours (total of 180 snapshots)
execute dbms_workload_repository.modify_snapshot_settings(interval => 2,-
retention => 360);
EOF
Note : start_workload.sh is also in the same directory..
Any help would be greatly appreciated.

Please put your script between "code" format delimiters.
http://wiki.oracle.com/page/Oracle+Discussion+Forums+FAQ
You can add the line "set -x" at the beginning of your script to see at which line it fails? I suspect the . ./env line.

Shell Commands not found error when running application

Hello,
Im using MonoDevelop IDE in my Mac, before it used to work fine but after few days, now when I'm opening the application nothing happens., i checked the Console for the log and it says this
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 17: dirname: command not found
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x52052].com.ximian.monodevelop[1510]: /Applications/MonoDevelop.app/Contents/MacOS/monodevelop: line 31: //mono-version-check: No such file or directory
May 9 21:29:39 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x52052].com.ximian.monodevelop[1510]): Exited with code: 1
I thought may be some error with the "dirname" command, so i commented it in the code and gave the path of directory myself and then the console shows up like this.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: grep: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 19: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 20: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 21: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 22: cut: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: /Applications/MonoDevelop.app/Contents/MacOS//mono-version-check: line 31: osascript: command not found
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: Cannot launch MonoDevelop
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro [0x0-0x56056].com.ximian.monodevelop[1532]: MonoDevelop requires the Mono Framework version 2.10.4 or later.
May 9 21:34:12 Sri-Vishnu-Totakuras-MacBook-Pro com.apple.launchd.peruser.501[599] ([0x0-0x56056].com.ximian.monodevelop[1532]): Exited with code: 1
I opened the contents of the application and run the shell script for opening aplication there it worked very fine and application started working.. But if i open application directly through launchpad or finder it doesnt show up and console
I tried running those commands in the terminal directly there they work.. But dunno whats wrong in here. and even if try to open the application through the terminal it all opens fine.. what could be the possible problem, is it with my mac..?

i finally figured out the problem.. it is with the environmental variables. the path for all those commands like "grep" is not being set for the GUI applications. that is why i got that error.
for those GUI applications which require path, we have to set path in the file /etc/launchd.conf the environmental variables set in here are used by the gui applications and those which are launched through spotlight.
that file may bot be present in most of the macs. No problem even if not present,we can create one and use.
so type in terminal
$ sudo vi /etc/launchd.conf
and in the editor add these lines
setenv PATH = /new/path
and save. Note: replace /new/path with the path which you need to have for the commands used in the script.
remeber that you need to restart your mac for applications to use these environmental variables.

Command not found on running binary files.

I have a very strange problem with my new arch installation, which I never faced on other linux installations/distros.
I'm trying to execute binary files from android-sdk, which I have them from other distros and always worked, and I get always "command not found" message. For e.g I tried to run adb(5 different files from different places), from terminal and from the folder in which is each and all times I get "command not found" message.
Some other work though, as eclipse binary. All files I've tried worked fine, and also work fine if I run them from Ubuntu installation.
I had this problem and for some newly isntalled packages too, as packagkit, and rutorrent. Packagekit worked after a reboot, but rutorrent gives same message.
Any help?

user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ QtADB
bash: QtADB: command not found
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ ./QtADBbash: ./QtADB: No such file or directory
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh ./QtADB
./QtADB: ./QtADB: cannot execute binary file
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $ sh QtADB
QtADB: QtADB: cannot execute binary file
user-arch@archusrxpc /home/@solushome/user-solus/QtADB-cwm_edition $ ls -l
σύνολο 2940
-rw-rw-r-- 1 user-arch 1000 5259 Απρ 13 2012 Changes.txt
-rw-rw-r-- 1 user-arch 1000 25330 Ιούν 26 2012 debug.log
-rwxrwxr-x 1 user-arch 1000 2970612 Απρ 13 2012 QtADB
drwxr-xr-x 1 user-arch 1000 0 Ιούν 26 2012 tmp
drwxrwxr-x 1 user-arch 1000 366 Μάρ 13 2012 tools
user-arch@archusrpc /home/@solushome/user-solus/QtADB-cwm_edition $
Last edited by dancer69 (2013-01-17 18:30:23)

Oracle apps 12i pre install checks fails in cl; command not found

Hi guyz,
Im trying to install 12i on external hard drive (windows xp), I followed the steps from http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=60&start=0
The installation fails in
command: cmd.exe /c D:\stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd d:\Tools\MKS\mksnt\bin d:\Tools\MSVC\V98
D:\stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/cygdrive/d/Tools/MKS/mksnt/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
There are no spaces in MKS tool kit and Visualstudio2005 install dir but still the installation fails.
I tried many combinations installing MKS and VS on c:, installing MKS and VS on d:, installing VC++ express edition but nothing worked. Also i have set the enviromental variable PATH each time i made a change. Still i get the same issue.
Im doing this for a week now, had no luck.
I had a successful installation of 11.5.10 from e delivery but it didn't had the financials modules needed. There is an update for 11.5.10 on edelivery but i was not sure if they had the financials modules in it, so i decided to go for 12i
Can anybody help me with 12i installation or provide me steps how to apply the updates on 11.5.10 if updates have financials in it.
I appreciate any help.

Oracle E-Business Suite R12 Installation on Windows 2003
Re: Oracle E-Business Suite R12 Installation on Windows 2003
If you have a VC98, you are using Visual Studio 6. You need to be using Visual Studio 8, and set the Visual Studio directory in Rapidwiz to d:\Tools\MSVS\VC.
The Vision installation of Oracle Applications has had Oracle Financials implemented for the fictitious company Vision Corporation from the beginning, 10.7 I believe, but definitely every 11i release has financials plus every other product licensed. Not all the newest products are fully implemented, but they are licensed.

ORACLE_HOME disappeared, SQLPLUS - bash: sqlplus: command not found

OK, I am a newbie but am having real difficulty with my 10G DB which I had set up on Unix Solaris box but someone was messing around with it and now I can't see ORACLE_HOME, ORACLE_BASE and ORACLE_SID, they all return blank when I try to "echo" each.
I realise I should have originally set it in Bash_profile, but is now too late.
So how do I set them back up, I cannot get SQLPLUS / AS SYSDBA.........bash: sqlplus: command not found
I have tried to reset and export but still doesn't work.
I got the ORACLE_BASE as:
training:/export/home/training/product/10.2.0/Db_1:N
but can't seem to set the three variables to run SQLPLUS, any ideas what I am doing wrong?
Tried messing around to reset but nothing works, this is the present state of affairs:
env
SSH_TTY=/dev/pts/3
USER=training
ORACLE_SID=training
ORACLE_BASE=/oracle/app
PATH=/usr/sbin:/usr/bin
PWD=/export/home/training/product/10.2.0/Db_1/bin
TZ=Eire
PS1=\e[33m\h\e[31m-\u-\e[33m\W/\e[31m-$\e[32m
SHLVL=3
HOME=/export/home/training
LOGNAME=training
ORACLE_HOME=/oracle/app/product/10.2.0
Can someone help me, really need a step by step guide to set these back up properly.
Thanks

just retyped the last one correctly:
find / -name sqlplus -ls
find: cannot read dir /var/lib/gdm: Permission denied
find: cannot read dir /var/lib/log/gdm: Permission denied
find: cannot read dir /var/mysql: Permission denied
find: cannot read dir /var/dt/sdtlogin: Permission denied
find: cannot read dir /var/core: Permission denied
find: cannot read dir /var/run/smc898: Permission denied
find: cannot read dir /var/spool/clientmqueue: Permission denied
find: cannot read dir /var/spool/mqueue: Permission denied
find: cannot read dir /var/fm/fmd/rsrc: Permission denied
find: cannot read dir /var/fm/fmd/ckpt: Permission denied
find: cannot read dir /var/fm/fmd/xprt: Permission denied
find: cannot read dir /var/postgres/8.2/data: Permission denied
find: cannot read dir /var/postgres/8.2/backups: Permission denied
find: cannot read dir /var/sma_snmp: Permission denied
find: cannot read dir /var/tmp/gconfd-root: Permission denied
find: cannot read dir /var/tmp/orbit-root: Permission denied
find: cannot read dir /var/krb5/rcache/root: Permission denied
find: cannot read dir /var/opt/SUNWjass/run/20091012152456: Permission denied
find: cannot read dir /.gconf: Permission denied
find: cannot read dir /opt/SUNWlwact/misc/: Permission denied
find: cannot read dir /opt/SUNWlwact/sdk/: Permission denied
find: cannot read dir /opt/SUNWlwact/xsl/: Permission denied
find: cannot read dir /opt/SUNWlwact/svc/: Permission denied
find: cannot read dir /opt/SUNWlwact/man/: Permission denied
find: cannot read dir /.sunw: Permission denied
199411 1 -rw-r--r-- 1 training other 0 Jan 14 23:12 /export/home/training/sqlplus
172460 2 drwxr-x--- 9 training other 9 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/sqlplus
188055 10 -rwxr-x--x 1 training other 8776 Oct 27 18:00 /export/home/training/product/10.2.0/Db_1/bin/sqlplus
184787 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/inventory/Templates/sqlplus
184842 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/oc4j/j2ee/oc4j_applications/applications/isqlplus/isqlplus/WEB-INF/classes/oracle/sqlplus
find: cannot read dir /root: Permission denied
find: cannot read dir /proc/227: Permission denied
find: cannot read dir /proc/832: Permission denied
find: cannot read dir /proc/835: Permission denied
find: cannot read dir /proc/458: Permission denied
find: cannot read dir /proc/381: Permission denied
find: cannot read dir /proc/624: Permission denied
find: cannot read dir /proc/818: Permission denied
find: cannot read dir /proc/2221: Permission denied
find: cannot read dir /proc/290: Permission denied
find: cannot read dir /proc/1166: Permission denied
find: cannot read dir /proc/273: Permission denied
find: cannot read dir /proc/229: Permission denied
find: cannot read dir /proc/225: Permission denied
find: cannot read dir /proc/478: Permission denied
find: cannot read dir /proc/445: Permission denied
find: cannot read dir /proc/815: Permission denied
find: cannot read dir /proc/410: Permission denied
find: cannot read dir /proc/432: Permission denied
find: cannot read dir /proc/440: Permission denied
find: cannot read dir /proc/427: Permission denied
find: cannot read dir /proc/352: Permission denied
find: cannot read dir /proc/443: Permission denied
find: cannot read dir /proc/1352: Permission denied
find: cannot read dir /proc/406: Permission denied
find: cannot read dir /proc/2353: Permission denied
find: cannot read dir /proc/670: Permission denied
find: cannot read dir /proc/667: Permission denied
find: cannot read dir /proc/405: Permission denied
find: cannot read dir /proc/213: Permission denied
find: cannot read dir /proc/16953: Permission denied
find: cannot read dir /proc/1146: Permission denied
find: cannot read dir /proc/2580: Permission denied
find: cannot read dir /proc/27831: Permission denied
find: cannot read dir /proc/444: Permission denied
find: cannot read dir /proc/1338: Permission denied
find: cannot read dir /proc/1350: Permission denied
find: cannot read dir /usr/lib/cc-cfw: Permission denied
find: cannot read dir /usr/aset: Permission denied
find: cannot read dir /.gconfd: Permission denied
find: cannot read dir /etc/flash/precreation: Permission denied
find: cannot read dir /etc/flash/preexit: Permission denied
find: cannot read dir /etc/flash/postcreation: Permission denied
find: cannot read dir /etc/inet/secret: Permission denied
find: cannot read dir /etc/apache/ssl.key: Permission denied
find: cannot read dir /etc/sfw/openssl/private: Permission denied
find: cannot read dir /etc/sfw/private: Permission denied
find: cannot read dir /etc/webmin: Permission denied
Looks a bit better:
199411 1 -rw-r--r-- 1 training other 0 Jan 14 23:12 /export/home/training/sqlplus
172460 2 drwxr-x--- 9 training other 9 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/sqlplus
188055 10 -rwxr-x--x 1 training other 8776 Oct 27 18:00 /export/home/training/product/10.2.0/Db_1/bin/sqlplus
184787 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/inventory/Templates/sqlplus
184842 2 drwxr-x--- 3 training other 3 Oct 27 17:58 /export/home/training/product/10.2.0/Db_1/oc4j/j2ee/oc4j_applications/applications/isqlplus
How to I run the sqlplus?

Sqlplus command not found

Hi All,
OS : Solaris
Oracle Version : 10.1.0.2.0
When i am trying to connect to database by typing sqlplus
i am getting error
-bash: sqlplus: command not found
previously when i connect like that i am able to connect to database
when i check space
I have 32 GB Drive and free space is 288M.
Can anyone tell me is this the space issue or any other issue.
I logged in with Oracle User

Vikas Kohli wrote:
Hi All,
OS : Solaris
Oracle Version : 10.1.0.2.0
When i am trying to connect to database by typing sqlplus
i am getting error
-bash: sqlplus: command not found
previously when i connect like that i am able to connect to database
when i check space
I have 32 GB Drive and free space is 288M.
Can anyone tell me is this the space issue or any other issue.
I logged in with Oracle UserSet the environment variable PATH correclty and make sure you've added $ORACLE_HOME/bin folder to it
export PATH=$ORACLE_HOME/bin:$PATH
sqlplus / as sysdbaKamran Agayev A.
Oracle ACE
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

Single user mode . using tail -f (command not found)

Have an empty computer with no systems disk as the installation CD start up will not go past the grey screen with the rotating logo before the panic crash page comes up and tells me to restart the computer.
Trying to boot into single user mode and then use the command tail -f to see contents of some of the logs... BUT I get the reply tail command not found ????

If the hard drive is empty, then you can only boot from the CD. Regardless of whether or not it has "tail," it won't do you any good. There are no logs.

Recover Accidentally Deleted Files in OS X via Terminal, "command not found"

Hi!
I am trying to recover a folder from the trash. It was deleted 30 min ago. The command I am trying to use is;
Mys-MacBook-Pro:~ storedisk$ com.apple.Finder AppleShowAllFiles true
And the response is;
-bash: com.apple.Finder: command not found
When I open any Terminal window I get this message, I don't know if this is relevant;
Last login: Wed Nov 13 08:27:40 on ttys001
I have found some similar replies on the forum but they do not seem to work in my case. I'm new to Terminal so I would really appreciate the help to find the cause and to resolve my problem.
Thanks a lot!

Thank you so much. This is the reply that I got;
Mys-MacBook-Pro:~ storedisk$ ls -a .Trash
.                                        Cherry Blossoms
..                                        FLiCKS
.DS_Store                              Nicholas Nickleby (1977)
13 Tzameti                              Robin Hood (2010)
Catch-22 [1970]                              We Live in Public 2009
Mys-MacBook-Pro:~ storedisk$ mv .Trash/FLiCKS .
Mys-MacBook-Pro:~ storedisk$
Mys-MacBook-Pro:~ storedisk$ mv .Trash/FLiCKS
usage: mv [-f | -i | -n] [-v] source target
       mv [-f | -i | -n] [-v] source ... directory
It is the FLiCKS folder that I am trying to retreive. Does this mean that I can retreive it? And if so, when I use the command mv .Trash/filename, where should it appear? Sorry for not fully understanding the instructions.
I also tend to empty the trash cumpulsively, which is how this happened in the first place. Trying to empty the files already in the trash but accidentally having had this folder selected I emptied that and kept the files that I didn't want.
The trash folder still has the size as if the folder FLiCKS is still in there though, if that makes any difference?
Thank you for all of your help.

Ldconfig: command not found

I just did a pacman -Syu and something went terribly wrong.
Whenever i try to install a new program i get something like this:
$ pacman -S glibc
warning: glibc-2.10.1-3 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): glibc-2.10.1-3
Total Download Size: 0.00 MB
Total Installed Size: 31.47 MB
Proceed with installation? [Y/n]
checking package integrity...
(1/1) checking for file conflicts [##############################] 100%
(1/1) upgrading glibc [##############################] 100%
/tmp/alpm_ZLRuBH/.INSTALL: line 39: ldconfig: command not found
/tmp/alpm_ZLRuBH/.INSTALL: line 40: init: command not found
Generating locales...
en_US.UTF-8... done
en_US.ISO-8859-1... done
Generation complete.
sh: ldconfig: command not found
error: command failed to execute correctly
Checking the integrity of the local database in /var/lib/pacman/
any ideas?

Have all the users with GNOME started a root's Terminal window???
I've noticed that using the Gnome's root terminal messes up the $PATH variable (as of today)... when i start archlinux (note: i don't use GDM) my path is:
/bin:/usr/bin:/sbin:/usr/sbin....
and many other items... but when a root terminal is started inside gnome, $PATH changes to:
/usr/ucb:/bin:/usr/bin:/etc
And ldconfig will fail... (and any other tool in /sbin) this change is restricted to this window only. If you exit the root terminal and go to a normal terminal, the path is what is expected.
This happens on a clean reformatted machine, installed archlinux, doing a pacman -Syu, installing gnome and all extras (including system administrations tools) (as tested today).
Maybe some config file is messed or is a bug from the Gnome guys...
Anyways the only workaround i can think is to start a normal terminal (for the guys that use gnome or use GDM to start their machines) and in the terminal doing a "su -" to got root access (of course will ask for the password) and then update/install/whatever you want with pacman.
And sorry about my english.
J.
Last edited by stargeizer (2009-09-24 14:35:10)

Mkfontdir and mkfontscale: command not found

Similar Messages

Maybe you are looking for