ML has downloaded but not installed.

ML had downloaded but not installed. . On the launchpad it says installing, but on the app store it says waiting. Its been doing this for 3 hours. what do i do?

It hasn't finished DLing until the MAS's progress bar is full and an install window pops up.

Similar Messages

  • HT201210 My download for iOS 7 was interrupted, it has downloaded but not installed. it goes through routine Terms & Agreements and everything, but when i try to update it tries to verify the update then says that the update is not available.

    I dont understand, when i try to update it will go through routine apple stuff, then it it will say " Software Update Unavailable (under) Software Update is not available at this time. Try again later." The thing is that i was downloading it and my wi-fi had restarted for some unknown reason and it downloaded onto my phone but not installed. and at the moment it is really bothering me because I have waited a long time for iOS 7 and I am not being allowed to update my phone to it and i just wanted to know how to fix it. Thank you.

    I imagine a ton of people are attempting to download it right now. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

  • How to download but not install OSX Mountain Lion on Mavericks

    Hi all
    I would like to download but not install OSX Mountain Lion on my MBP which is currently running OSX Mavericks.
    This however seems impossible. I think OSX Mavericks were already installed on my MBP and therefore it seems "impossible" to download it.
    Now, why would I to do this? The answer is quite reasonable, due to certain demands related to an application portfolio I need Mountain Lion, because the portfolio is not upgraded to run on Mavericks. And, it is more reasonable to downgrade a version of OSX, rather waiting for the portfolio upgrade which can take years.
    Yes, I need to downgrade my secondary MBP which also came with preinstalled Mavericks. This can be done, if I only could download but not install Moutain Lion.
    It should be easy enough; download Mountain Lion, make an installer and make a bootable thumb usb stick. Then erase Mavericks and install Mountain Lion.
    I have previously bought Mountain Lion so it is accessible to me in the App Store, but whenever I try to hit the Download button, I get a message saying this can't be done, since I am running Mavericks.
    This bugs me, it should be obvious users needs the flexibility to swap whatever OSX version they need. It is still software.
    So, how can I download but not install Mountain Lion on my newer MBP that came with preinstalled Mavericks?
    I would like to see answers like:
    "In order to get this to work, you first have to disable the locking mechanism in [...] " instead of "No, this is impossible to do"
    Regards

    Thanks for your reply Eric
    Can't help wondering thought, people are ok with this?
    Basically Apple are saying: "Do not attempt to install an older version of OSX which came preinstalled. If so, expect multiple failures." Really?! Has it always been so? For me it's not like I'm going to install Snow Leopard on my Late 2013 Retina MBP, but I would expect some form of backward compatibility between the previous version and it successor. Apparently this is not possible, and how is this even acceptable? 
    Personally, I am not going to downgrade, as if I had a choice, but I would and I expected however, the possibility to at least download the previous OSX version. What do you do if you have bought several applications, not necessarily online from App Store and buy yourself a new Mac with preinstalled Mavericks and after installing your "old" applications they fail to work properly? What do you do since downgrading apparently is not an option. So... again, what do you do? 
    If you don't have friends with an older Mac, you could be facing serious problems. And I'm not talking about gaming, but serious business. 
    I find this quite disturbing actually, and please tell me it's not so. There gotta be a way to do this?
    I simply want to download the OS but I expect some registry values (like windows' registry) keeps preventing this.
    It should be possible to simply download and not download and install in one operation, shouldn't it?
    Regards

  • Hi..............I have a new Creative Cloud registration and have bought the new Dreamweaver CC but I cannot seem to down load it? My Creative Cloud has downloaded but not my new Dreamweaver CC?  I currently have the old Dreamweaver CS4 on my system! Can

    Hi..............I have a new Creative Cloud registration and have bought the new Dreamweaver CC but I cannot seem to down load it? My Creative Cloud has downloaded but not my new Dreamweaver CC?  I currently have the old Dreamweaver CS4 on my system! Can anyone help?

    The first thing you need to do is download and install the Creative Cloud Desktop Application. Then, open that program and click on the Apps tab. You download and install creative cloud applications from there.
    If your computer doesn't meet the minimum requirements to run a given program, it won't show up under the Apps tab.
    Once they are installed, you'll need to go to your Applications folder (Mac) or Program Files (x86) folder (PC) to start the program itself.

  • MacKeeper downloaded but not installed. Can't drag it to Trash so how do I get rid of it?

    MacKeeper downloaded but not installed. Can't drag it to Trash so how do I get rid of it from my computer?
    Problem solved by reviewing FAQ's. Many thanks for those who viewed my question.
    Message was edited by: Mifti

    Hi Thomas, I was trying to drag it from the Launch Pad where it just bounced back again. Have now solved it by dragging it from the Application.
    Thanks.

  • Why will the iOS 7 download but not install?

    why will the iOS 7 download but not install?

    IOS 7 stinks wrote:
    I made the mistake go read the internet
    It would take a very long time to read the entire Internet. There are billions of pages.

  • Downloading but not installing Mountain Lion?

    I have a MacBook Pro with Retina display purchased since June 11 so I qualify for the free upgrade to Mountain Lion.  I understand that I have 30 days to get the software for free once it is released.  On the other hand, I would like to wait before installing the software until 10.8.1 or 10.8.2 are released to let some of the bugs be ironed out first.  Is it possible to download ML but not install it (within the 30 day period)?

    I would do as stated above except that I would set the install location to an external drive and then when the download finishes disconnect the external.
    The reason for this is you may not have the option to NOT reboot the system after the download finishes. And even if you do have that option at the time the download finishes the next time the system reboots it may be set, in the EFI system or through some command placed on the hard rive, to start the install automatically.
    At this time no one really knows how Mountain Lion will react when downloaded from the Mac App Store.
    Also putting the download on an external drive allows to to actually install it to that external and run it from there to check it out before you do the install on your internal drive.

  • Why can I download but not install Mavericks?

    My Macbook Air will download 5 programs associated with Mavericks but will not install them.  I get an error message that reads, "unable to install due to unexpected error".   Help please!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • I want to download, but not install Mavericks.

    I am not quite ready to upgrade to Mavericks, but would like to download it and not install it.  I might install it on an external drive first, if that is possible.  It appears to be a 3.5 hour download for me.  Can I just start the download process and leave it?  I am afraid it will automatically install if I don't catch it at the end of the download process.  Thanks!
    iMac  10.6.8

    The 10.9.3 version of the installer is version 1.3.42. Use, "More Info'" Cmd-I to see that. If that is what you have, re-downloading should replace the previous one with the newer version.
    I'm downloading the 10.9.4 version now and will post back its installer version number.
    Okay, 10.9.4 installer version is 1.3.44.

  • New OS Downloaded but Not Installed

    I downloaded the new OS 4.2, but it did not install.
    How doI get it to install.

    Can you tell us what happens when you try to install the update? Does computer freeze? Do you get error messages? We nee a little more information to help you.

  • I can download but not install iTunes 10.5 on my Win 7 computer

    How can I install iTunes 10.5 on my Dell Windows 7/64 bit computer?  It downloads but will not install- all kinds of error messages... AND I can't use a new iPod touch (4th gen) with iOS 5 presumably pre installed w/o 10.5 on the Windows 7 PC!!!!

    Hi again! Fixed it myself, but here's what I did (in case anyone else encounters the same problem):
    Control Panel > Programs and Features > Add or Remove Programs
    1. Uninstall iTunes (if you're upgrading, but if it's a fresh install, disregard this step)
    2. Uninstall Apple Mobile Device Support
    3. Uninstall Apple Application Support
    4. Uninstall Bonjour
    5. Repair Apple Software Update. If you can't, try uninstalling. I couldn't uninstall or repair mine (the same error message appeared) so I used Microsoft Fixit Engine (http://support.microsoft.com/mats/Program_Install_and_Uninstall) to uninstall it.
    6. Download the iTunes installer and run it. Voila!

  • My firmware has downloaded but wont install the update.

    I recently bought an older macbook, and I went to install updates on it. All but one of them inatstalled. The frimware for some reason will not install. The macbook was purchased in 2009, and is running off of mac os x 10.6.8. im not sure if any of this information is helpful?

    Please enter your Mac's serial number on this page. Please do NOT post it here. You can get your Mac's serial number by clicking on the apple logo at the top left and choosing, About This Mac. Where it says what version of OS X you're running (10.6.8 in your case), click on that. It will rotate between the OS version, the build number of the OS, and your serial number.
    Once you have entered your serial number on that site, then please link to the resulting page here so we can see exactly what model Mac you have.
    Or, hold down the Option key and click on the apple. With the Option key held down, the first choice will instead be System Information. Copy/paste only the top five lines, and the Boot ROM version of the resulting window. Do not include the serial numbers or UUID. This is all we should see here, such as for my Mac:
    Model Name:  Mac Pro
    Model Identifier:  MacPro5,1
    Processor Name:  6-Core Intel Xeon
    Processor Speed:  3.33 GHz
    Boot ROM Version: MP51.007F.B03
    That's enough info for users here to see what model Mac you have. The ROM version is your current firmware level. From there, we can look to see what, if any firmware updates are supposed to be available for your Mac. I ask because the update you're being told to apply my be in error and there really is nothing to apply.

  • Lion OS Downloaded but Not Installed???

    Downloaded Lion OS to MacPro.  Rec'd install prompt, agreed to terms and hit install/continue.  It was not installed.  How do I find it to install again. App store says downloaded and no option to re-download.  I had/have OS 10.6.8 installed. 

    How do you know it isn't installed? Select About This Mac from the Apple Menu. What OS version is displayed?
    If the installer wasn't deleted then you will find it in the Applications folder.

  • Flash Player 10 will download but NOT install on Mac (10.4.11)

    I have a MacBook Pro that has all of the necessary ingredients to run FP 10 (unless it requires Java, which also won't install - does the same thing that I am about to describe FP 10 doing)...I can download it, but as soon as I double click on the FP 10 icon, nothing happens. I don't get any install instructions, nor do I get an error message.
    Is there something that I am doing wrong? Is there something I should be using to open the application prior to installation? This is really ticking me off, and I have had the same problem with the docx converter....
    I am NOT an expert, I am just someone who would like to be able to use her %&@! computer....!

    I have a MacBook Pro that has all of the necessary ingredients to run FP 10 (unless it requires Java, which also won't install - does the same thing that I am about to describe FP 10 doing)...I can download it, but as soon as I double click on the FP 10 icon, nothing happens. I don't get any install instructions, nor do I get an error message.
    Is there something that I am doing wrong? Is there something I should be using to open the application prior to installation? This is really ticking me off, and I have had the same problem with the docx converter....
    I am NOT an expert, I am just someone who would like to be able to use her %&@! computer....!

  • Mountain Lion downloaded, but not installed.

    I recently download Mountain Lion, but when the download finished, I recieved an error message saying "Product could not be installed. Check your internet connection." My internet connection was actually working fine. I would like to try and download again, but that would mean paying again, and I don't want to do that if I don't know for sure if it's going to work.

    Check that your computer is compatible with Mountain Lion.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    Mac Pro (Early 2008 or newer) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better)
    8 GB or more of available space

Maybe you are looking for

  • How can i change the paying method on my account?

    I dont have a paying method and i cant update or download anything on the appstore because my account needs to be reviewed on the itunes, itunes demands a paying method and i dont have one

  • How do I add my new 5th Gen Pod to my old mini pod i tunes?

    Can anyone help? Bit scared to even attempt to connect my new 5th generation i pod to my pc as I have been happily using itunes with my ipod mini for over a year with no problem - how do I do it? Do I need to load software that came in the box or sim

  • Transfer assets from one asset class to another having different depreciation keys.

    Hi Gurus,      I am a noob in FICO, and I am facing a problem while transferring assets from one asset class to another. Below is the scenario. I created two assets 100000000000-0 under asset class 4690a and 200000000000-0 under asset class 4690b. An

  • Code for selection screen,  urgent

    Hi Everyone,   I need code for selection screen.   I have four radio buttons, p1, p2,p3,p4(assume) If I select second radiobutton, remaining three radiobuttons should be in disable mode and also the information under them should be in disable mode. G

  • Workitem not getting deleted from SAP inbox

    Hi , I have a scenario in workflows , in which when a user creates a timesheet , a mail goes to approver , when the timesheet is approved the mail should get automatically deleted . We have created a standard task for this purpose ( a copy of TS31000