ML85 - approval overwrites Reference text in all SES

Hi,
Why is the reference text is overwriting with the text from first SES to all SES approved in ML85 screen ? For instance, in below screen, the pop-up appears only once with the text from first SES and when the approver goes ahead, it applies the text for all three SES approved in this session. Ideally, looks like this pop-up should appear three times with header data from three SES in this case because three SES are involved. Is this a bug ?
Thanks,
Sankar

Hi Prasoon,
Thanks for that note. It perfectly explains the system design. However I would call SAP's recommendation as workaround to manage product limitation, not the solution :). Thanks again for your help.
Cheers,
Sankar

Similar Messages

How do I preserve cross reference text when exporting to XML?

I am exporting my Framemaker documents to XML. However, when I open the raw XML, the reference formatting is obviously gone. So instead of seeing, say, see Figure 6. I now see, see .
Is there some way to preserve this on export?
Help would be much appreceated!

Josh,
The normal behavior is to have an empty element with the ID/IDRef markup that allows the xref element to be resolved again afterwards, by whatever post-processing step you put the XML through. The text of a cross-reference is a FrameMaker formatting artifact (not unlike a paragraph format, etc.) and is intentionally discarded during export. If you reimport the XML with the empty element, FM will re-resolve the xref, and then will restore the text using whatever format it originally had (the format name is also stored as markup).
If you want to preserve the element tag of the xref, I don't think there is any way to preserve the text, unless you write an import/export API client. You could possibly use an XSLT stylesheet to repopulate the text in some cases, but this seems like a process fraught with many complications.
If you do not care about the element tag, the manual says that you can just unwrap it, then you'll get the xref text. Here is a (rough) snip from the Structure Developers Guide:
Translating FrameMaker cross-reference elements to text in markup
You may not want your FrameMaker cross-reference elements to remain elements in the
markup representation—you can choose to translate them to text instead. To do so, use
this rule:
fm element "fmtag" unwrap;
where fmtag is the FrameMaker element tag for a cross-reference element.
All of this does beg the following question, though... why do you want to do this, especially if the text is referencing figure numbers, page numbers, etc. that have no relevance in the markup? Normally, it is expected that preservation of the markup is the essential thing, allowing the text to be regenerated later by whatever process uses the XML (perhaps including FM). If you drop the element tag, the actual link will be permanently lost.
Russ

Problem with Approve & Reject buttons text

Hi Team,
Once we have configured UWL in EP 7.0 & backed is SRM 7.0, facing problem in Approve & Reject Buttons text.
Instead of showing Approve & Reject text on Buttons, it showing text like this com.sap.pct.srm.core.action.oldwfl.approve & com.sap.pct.srm.core.action.oldwfl.reject
Can you please help me on this?
Thanks in advance.
Thanks & Regards
Sandeep.

Sergio, Thanks for your reply.
It's happening for all the task items. Pls find out XML file here. here i pasted some of the code from my XML, because it is not taking full XML code here.
      <Action name="com.sap.pct.srm.core.action.oldwfl.approve" groupAction="" handler="FunctionModuleActionHandler" referenceBundle="com.sap.pct.srm.core.approve" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="FunctionModule" value="/SAPSRM/FU_WF_RFC_DECISION"/>
        <Property name="IV_DECISION" value="APPROVED"/>
        <Property name="IV_APF_VERSION" value="0500"/>
        <Property name="IV_WIID" value="${item.externalId}"/>
        <Property name="IV_MODE" value="APPROVAL"/>
        <Property name="FunctionModule" value="/SAPSRM/FU_WF_RFC_DECISION"/>
        <Property name="display_order_priority" value="50"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.conf.detail" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="detail"/>
        <Property name="ObjectValue" value="a=b&sapsrm_botype=${item.BOTYPE}&sapsrm_boid=${item.BOID}&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_mode=${item.BOMODE}&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="conf"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.oldwfl.conf.display" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="detail"/>
        <Property name="ObjectValue" value="a=b&sapsrm_botype=BUS2203&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_mode=DISPLAY&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="conf"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.OldWFL" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="oldwfl"/>
        <Property name="ObjectValue" value="a=b&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="uwl"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
    <Action name="com.sap.pct.srm.core.action.launchWD.conf.display" groupAction="" handler="ObjectNavigationLauncher" referenceBundle="com.sap.pct.srm.core.launch.WDCLFPOIF" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" launchNewWindowFeatures="toolbar=no,menubar=no,location=no,directories=no,resizable=yes">
      <Properties>
        <Property name="Operation" value="detail"/>
        <Property name="ObjectValue" value="a=b&sapsrm_botype=${item.BOTYPE}&sapsrm_boid=${item.BOID}&System=${item.systemId}&sapsrm_wiid=${item.externalId}&sapsrm_mode=DISPLAY&sapsrm_portalbaseurl=<Portal.BaseURL>&sapsrm_pcdlocation=<IView.ID>"/>
        <Property name="ObjectName" value="conf"/>
        <Property name="System" value="SAP_SRM"/>
        <Property name="display_order_priority" value="30"/>
      </Properties>
    </Action>
Thanks & Regards
Sandeep.

Overwrite Label Text

Hi,
I want to overwrite a Label Text.
The Text I want to overwrite comes from a bound Context Node.
Before I want to overwrite it I need the current Text, because I want to change Labels dynamically - however to get the actual Text I use Method GET_TEXT of Class CL_WD_LABEL but this Method sets some Attributes (which seems to be an error for my understanding of OO Concepts) anyway it seems not possible to overwrite the Text with Method SET_TEXT after calling GET_TEXT method (GET_TEXT will call the Bound Attribute after 1st call).
Any ideas?
TIA,
Sebastian

Hi,
I want to change n-Lables
And I want to do it like that: Loop at every Labels of a View and Replace every Occurance of "Oracle" with "SAP" (for example)
But if the Label I want to change the text for is bound to a Context Element with an DDIC-Type the GET_TEXT Method (which I need for dynamic text changes) will set Parameters in the Label class which will always will get the old text (on next GET_TEXT call) never mind what text I assigned with SET_TEXT.
But without a GET_TEXT I will not get all "Oracle" lables and so I can't replace the Texts I want to.
Hope I could explain my Prob
Regards,
Sebastian

In ICal is there a way to see all of the text in all day events on the month view of the calendar. Seems to wrap text only if there is a time on the event

In ICal is there a way to see all of the text in all day events on the month view of the calendar? Seems to wrap text only if there is a time on the event

The paths won't agree on the two OSs so a simple XML import isn't likely to work.
See Sync iPod/iPad/iPhone with two computers and, if needed, Make a split library portable. The techniques in the first link will work when moving the library between Windows and OS X as long as the library is "portable", but iTunes takes quite some time checking the database when the library is opened under a different OS.
tt2

All text in all email are blank, can't view attachments.

After last osx update 10.5.6 I noticed a problem with my email. I have 2 email accounts in mail 3.5 The 1st works fine, the 2nd account lost all text in all email in in-box. Also all attachments are blank. I've tried forwarding the email to another account and also printing email but all the text looks as if it has been deleted. I've tried the font color and encoding but no luck. What would cause 20 emails to delete all the message text and blank out the attachments in only one email account?

update - I did a rebuild mailbox and all email in that problem account diapered. I can only guess that the email got corrupted and the rebuild purge the problem records. They are not in the delete folder either. What would cause one email box to become corrupt?

Wrap text for all-day events

I've seen this question floating around, unanswered, since 2005...
How can I get iCal to show the full text of an all-day event in Month View? There's lots of blank white space, but it seems that iCal never wraps the text of all-day events, and just cuts off the text that doesn't fit on one line.
Am I missing something? Is there any way to get Apple to implement something so basic?

I have the same question, but need to add one odd observation about my own experience...
When I enter new events, sometimes the text wraps to two lines and sometimes the text is cut off after one line. It appears to be about 50-50. I can find no explanation for this behavior anywhere nor any way to control it. Very strange.

HELP! Grey footnote reference text in InDesign CS5

Footnote reference text appears in illegible grey highlighted form in InDesign CS5. Footnote text itself retains numbering and styles. How do I fix this

Is the highlight pink? That means a missing font. Check Type>Document Footnote Options and see what paragraph style you have set for Footnote Formatting, then check that paragraph style. Also, click into the footnote to see if the type has any local override that is changing it from what is defined in the paragraph style (look for the + next to the paragraph style's name).

On Pages 09. Error Message "Missing Font" - text on all my files/Documents has disappeared. I know it is still there from the word count - but it is invisible. Any clues Gratefully received.

On Pages 09. Error Message "Missing Font" - text on all my files/Documents has disappeared. I know it is still there from the word count - but it is invisible. Any clues Gratefully received.

What version of Pages '09?
Have you updated it to the latest iWork '09 v4.3?
Peter

SQL Query to list the "Optional reference" field of all packages in cm 2012

Guys, could you please point me to the correct view to extract the "Optional reference" property of all application? I've got a powershell script to get that from WMI, but i really am expecting a way to extract it from ConfigMgr DB if that's
available in CM Db.
Thanks,
Delphin.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Thank you torsten for helping me out here.
I've managed to come up with a query to list the Display name, package verison and optional reference property.
;WITH XMLNAMESPACES ( DEFAULT 'http://schemas.microsoft.com/SystemCenterConfigurationManager/2009/AppMgmtDigest')
select DisplayName, SDMPackageDigest.value('(/AppMgmtDigest/Application/CustomId/@ResourceId)[1]', 'nvarchar(10)') [Optional Reference]
,sdmpackageversion
from fn_ListApplicationCIs(1033)
order by DisplayName
But the problem here is, I'm looking for the value AB00001 from that XML but it actually giving me Res_631986121. Can someone help me to get the value AB00001 from that xml file?
<CustomId ResourceId="Res_631986121">AB00001</CustomId>
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Maximum size to reference text fields in report painter

I have created a library for report painter but reference text fields were not transfered because of their size exceed 24 character long. is there some SAP procedure to extend this size at the moment we are creating the library? Thanks in advance for support me.

Hi Francisco
Firstable I created a structure evaluation using SAP TC MCS7 and took the own customized table that was set up for SPL porpuses. this table contains several fields including text fields and now we would like to take them for set up several report painter but I noticed that this kind of fields are not available when I created the library using GR21 also when I tried to create the set using GS01 appeared a error "this field is bigger than 24 characters" or something like that.
SGTXT              Text Field                      50
ZZBKTXT          Text Head Reference      25
ZZKIDNO          Payment Reference        30
Thanks in advance to take time for my research.
Regards

Since 3 days i have unsharp icons and text in all programs

hello
since 3 days i have unsharp icons and text in all programs, but not in web or finder. programs like photoshop, after effects, open office etc. how can i fix that? tinkertool, and standard systemoptions didn´t help.
it is very weared to me. the macbook pro retina is just 2 month old. it looks like a software bug?...

Check this:
http://support.apple.com/kb/PH13821
You are still under warranty, take it in for inspection. Take full advantage of your warranty.

How does one overwrite existing text?

One can do plenty of clever formatting in drafting Thunderbird correspondence. But I am unable to find how one overwrites existing text. Can someone help, please?

please I am having trouble understanding. But here goes what I think your asking.
When you reply in an interleaved fashion as you did with my email, you need to break the previous message by pressing enter to get your own text area to type in. I saw a discussion on one of the develop0er list the other day where they were suggesting that some of the font information is bleeding back and forth in these situation and brainstorming what to actually do about it. That is just a discussion as yet. See https://groups.google.com/forum/#!topic/tb-planning/ZYusepcRj-k
One of the best option in my opinion is to use the quote and compose managerhttps://freeshell.de/~kaosmos/quoteandcomposemanager-en.html as it preserves the vertical lines Thunderbird shows while editing in the outgoing message to make it clear where the interleaved information is located. It also has a stabilize font option that has helped many. (The author is Italian, so Italian locales of his add-ons are always available)
Instruction on installing add-ons here http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

Is there a way to change the font of all text in all layers all at the same time in

I'm wondering if there is a way to change the font of all text in all layers all at the same time in Illustrator CS5.

From the menu...... Type > Find Font

How to view text of all triggers?

How to view text of all triggers?
I tried,
sqlplus "/ as sysdba"
SQL> Select Description, Trigger_Body from all_triggers;
I see only one trigger but there are more than 500 triggers.

Perhaps you want to query DBA_TRIGGERS instead of ALL_TRIGGERS.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_4162.htm#sthref1922
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_2107.htm#sthref1297

ML85 - approval overwrites Reference text in all SES

Similar Messages

Maybe you are looking for