MM Question about princing condition

Hi Gurus,
I have added a new field in the table EKKO for price determination, this field will be updated by MM06E005 exit.For price determination I have changed the structure KOMPAZ, and I have created condition table , my question is how the new field value will be updated ?..What exit I have to use in Purchase Order creation ?
Thanks
Tatiana

Hello,
check:
Customizing -> Material Management -> Purchasing -> Conditions -> Define Price Determination Process -> "System Enhancement".
from the text there:
The new fields in the processing of purchasing documents are filled with the following USER EXITS:
Extension of LMEKO001 with function module EXIT_SAPLMEKO_001 (for the header fields of table KOMK)
Extension of LMEKO002 with function module EXIT_SAPLMEKO_002 (for the item fields of table KOMP)
Hope this help,
Jacques Nomssi

Similar Messages

Question about a conditional join

Is it possible to do a conditional join based on a field in a table?
say I have the query below and the table fields ate the bottom. I am trying to get the exact syntax for doing a conditional join. Can any one help?
Thanks
select e.fname,e.lname,a.areaname
FROM employee e
JOIN area a ON (If e.newareaid is not null and date being searched for >= e.movedate then a.areaid = e.newareaid ELSE a.areaid = e.areaid
======================================================
For example
Employee table
empid
areaid
fname
lname
newareaid
movedate
Area table
areaid
areaname

Hi,
In this particular case, the complicated join condition can be simplified considerably.
There are 2 situations that have different join conditions, but in each situation a.areaid has to match something (let's call it join_id) from the employee table, and that can be determined just by looking at the row in the employee table. If we decide what join_id is before starting the join, then the join condition will be quite simple:
WITH     got_join_id
     SELECT     fname, lname, areaid, newareaid
     ,     CASE
              WHEN newareaid              IS NOT NULL
              AND       date_being_searched_for   >= movedate
                  THEN newareaid
               ELSE areaid
          END     AS join_id
     FROM     employee
SELECT e.fname, e.lname, a.areaname
FROM      got_join_id e
JOIN      area           a   ON a.areaid = e.join_id
;You could also skip the sub-query, and put the CASE expression in the join condition:
SELECT e.fname, e.lname, a.areaname
FROM      got_join_id e
JOIN      area           a   ON a.areaid = CASE
                             WHEN newareaid              IS NOT NULL
                                 AND       date_being_searched_for   >= movedate
                                    THEN newareaid
                              ELSE areaid
                         END
;This is basically what Hoek did, except Hoek complicated it by putting the comparison to a.areaid inside the CASE expression.
Edited by: Frank Kulash on Apr 15, 2013 3:22 PM

Question about setting conditions in searches using SQL

I am trying to search through a table where the "Score" column hs to be in between two numbers.
Table Test:
Name: #
Tom 40
Tom 60
Tom 50
joe 60
If i were to search for "Tom" nomally i get all 3 back. Regardless of the code for SQL(assume it works) will the search display only Tom 40 and Tom 50 is i want between 40 and 60? In other words if the condition field has a valid sql expression that works do i need to write anything to display the data in SQl or it will be fixed automatically?

SQL> select * from test;
NAME SCORE
Tom 40
Tom 60
Tom 50
Joe 60
SQL> select * from test
2 where name = 'Tom';
NAME SCORE
Tom 40
Tom 60
Tom 50
SQL> select * from test
2 where score between 40 and 60;
NAME SCORE
Tom 40
Tom 60
Tom 50
Joe 60
When you use the 'between' operator the search for score includes both 40 and 60. In case of this example, if you were to display only Tom's scores of 40 and 50, you should use the following select statement.
Select * from test
where score >= 40
and score < 60;
SQL> Select * from test
2 where score >= 40
3 and score < 60;
NAME SCORE
Tom 40
Tom 50

One question about Pricing and Conditions puzzle me for a long time!

One question about Pricing and Conditions puzzle me for a long time.I take one example to explain my question:
1-First,my sale order use pricing procedure RVAA01.
2-Next,the pricing procedure RVAA01 have some condition type,such as EK01(Actual Costs),PR00(Price)....,and so on.
3-Next,the condition type PR00 define the Access Sequences PR00 as it's Access Sequences.
4-Next,the Access Sequences PR00 have some Condition tables,such as:
     table 118 : "Empties" Prices (Material-Dependent)
     table 5 : Customer/Material
     table 6 : Price List Type/Currency/Material
     table 4 : Material
5-Next,I need to maintain Condition tables's Records.Such as the table 5(Customer/Material).I guess the sap would supply one screen for me to input the data of table 5.At this screen,the sap would ask me to select one table,such as table 5.When I select the table 5,the sap would go to the screen to let me input the data of table 5.But when I use the T-CODE VK31 or VK32 to maintain Condition tables's Record,I found it's total different from my guess:
A-First,I can not found one place for me to open the table,such as table 5,to let me input the data?
B-Second,For example,when I select the VK31->Discounts/Surcharges->By Customer/Material,the sap show the grid view at the right side.At the each line of the grid view,you need to select the Condition Type at the first field.And this make me confused very much.Why the sap need me to select one Condition Type but not the Condition table?To the normal logic,it ought not to select Condition table but not the Condition Type!
Dear all,I'm a new one in sd.May be this is a very stupid question.But it did puzzle me for a long time.If any one can explain this question in detail and let me understand the concept,I will appreciate him/her very much.Thank you.

Hi,
You said that you are using the T.codes VK31 or VK32.
These transaction codes are used to enter condition records for standard condition types. As you can see a grid left side having all the standard condition types like price, discounts, taxes, frieghts.
Pl check using T.code VK11 OR VK12 (change mode)
Here you can enter the required condition type, in the intial screen. (like PR00, MWST, K004, K005 .....etc)
After giving the condition type, press enter or click on Combinations icon on top of the screen. Then you can see all the condition tables which you maintained for that condition type. Like as you said table 118, table 5, table 6 and table 4.
You can select any table and press enter, then you can go into the screen in which you have all the field cataglogues you maintained for that table. For example you selected combination of Customer/Material (table 5) then after you press enter then you can see customer field on top, and material fields.
You can give all the required values and save the conditon record.
Hope this is clear.
REWARD IF HELPFUL.
Regards,
praveen

Questions about VK34 (create condition record with reference)

Hi experts,
When clicking the botton "copy condition" via VK34, an error message pops up. It says the error is due to no definition of select rule. I use the standard condition record PR00.
Q1: How to define "select rule"?
Q2: Any chances to download condition record when using VK13 or VK33?

Hello Colleague.
This Unicode problem occurs mainly with pricing reports (recognized by report names that start with /1SDBF12L/RV14AK).
To regenerate these, call transaction V/LE or use transaction SE38 to execute the report RV14ALLE.
Leave the selection screen empty and execute (F8).
See SAP note 497850.
If you have further questions about the generation in the condition maintenance, I recommend to read Note 886771.
I hope it can help you.
Regards
Ruy Castro

Follow-up question about forms and SharePoint Online

I asked a question about life after InfoPath earlier, and got a good answer:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fb23b3d9-8a09-4267-aab5-09929f6a3082/life-after-infopath-seeking-advice
After looking at all of the limitations of SharePoint Online, I'm wondering how developers are dealing with the limitations. Lets say you are asked to develop something that has complex logic, including fetching data from external web services, dynamically
displaying parts of a process to people depending on role, and ending up with a printable document. In our on-premises environment, InfoPath is well suited to this task, with some code behind for some things. Or, if not using InfoPath, we would use application
pages and workflow.
Neither of those are available in SharePoint Online, so what would you do?

Some things, such as the conditional display of content, can be done via JavaScript. More advanced items, such as integrating external web services would likely require a SharePoint "app". A SharePoint app is essentially a link to a separate site
that is running an asp.net web app (or PHP, or whatever). This asp.net site can do anything it needs with any web services, or conditional formatting, or anything. Because it's registered as a SharePoint app, it can also call back into the SharePoint site
and work with data. So, a SharePoint App could present the user with a robust form that simply sends the data back to a SharePoint list. The SharePoint app can also be surfaced on the SharePoint site itself in an iframe, so the user won't know that the form
is hosted by another server.
By the way, the ideas behind the app model permeate the entire SharePoint environment: instead of having the SharePoint server itself run all kinds of custom business logic, that workload is handled by other servers, so the SharePoint servers can be focused
on running the core bits of SharePoint. InfoPath puts a large load on the servers, so it's out. XSLT list views also put a load on the server, so they're also out. SSRS is an amazingly fantastic tool, but is not supported in the cloud (and there's no
alternative). Timer jobs, event handlers, workflow, and many other things have been re-architected to take the load off the SharePoint servers.
Mike G.

Question about Scheduled Task

Question about Scheduled Task
RequestCenter 2008.3
Oracle 10g
Websphere 6.1.27
IE 7
Hi:
I have tried to get a scheduled task to work without any luck. I am referencing a date/time field on the form and the task goes to "Scheduled", but never moves to "Ongoing".
I've opened a case with support, but was wondering if anyone has gotten this to work.
Thank you
Daniel
Safeway Inc.

We just went through this too. If the plan is fairly complex, and has allot of conditional tasks you will have difficulty.
The explanation I got from Shweta is that the calculation that determines the OLAs before my scheduled task was to start looks at ALL the potential tasks and combines them, essentially saying the duration is much longer than what you think it should be, ie the sum of all potential task OLAs, not just the tasks that became active.
Bottom line if your scheduled date is with

A few questions about Patone colors

I have a few questions about patone colors since this is the first time I use them. I want to use them to create a letterhead and business cards in two colors.
1)
I do understand that the uncoated is more washed out than the coated patone colors. I heard that this is because the way paper absorbs the inkt. This is why the same inkt results in different colors on different paper (right?). My question is why is the patone uncoated black so much different than normal black (c=0 m=0 y=0 k=100) or rich black:
When I print a normal document with cmyk, I can get pretty dark black colors. Why is it that I cannot have that dark black color with patone colors? Even text documents printed on a cheap printer can get a darker color than the Patone color. It just looks way too grey for me.
2) For a first mockup, I want to print the patone colors as cmyk (since I put like 10 different colors on a page for fast comparison). I know that these cmyk colors differ from the patone colors and that I cannot get a 100% representation. But is there a way to convert patone to cmyk values?
I hope that some of you can help me out with my questions.
Thanks.

You can get Pantone's CMYK tints in Illustrator, (Swatches Panel > Open Swatch Library > Color Books > PANTONE+ Color Bridge Coated or Uncoated) but in my view, what's the point? If you're printing to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use Pantone's CMYK so-called "equivalents."
Pantone colors are all mixed pigmented inks, many of which fluoresce beyond the gamut limits of RGB and especially CMYK. The original Pantone Matching System (PMS) was created for the printing industry. It outlined pigmented ink formulations for each of its colors.
Most digital printers (laser or inkjet) use CMYK. The CMYK color gamut is MUCH SMALLER than what many mixed inks, printed on either coated or uncoated papers can deliver. When you specify non-coated Pantone ink in AI, according to Pantone's conversion tables, AI tries to "approximate" what that color will look like on an uncoated sheet, using CMYK. -- In my opinion, this has little relevance to real-world conditions, and is to be avoided in most situations.
If your project is going to be printed on a printing press with spot Pantone inks, then by all means, use Pantone colors. But don't trust the screen colors; rather get a Pantone swatch book and look at the actual inks on both coated and uncoated papers, according to the stock you will use on the press.
With the printing industry rapidly dwindling in favor of the web and inkjet printers, Pantone has attempted to extend its relevance beyond the pull-date by publishing (in books and in software alliances, with such as Adobe) its old PMS inks, and their supposed LAB and CMYK equivalents. I say "supposed" because again, RGB monitors and CMYK inks can never be literally equivalent to many Pantone inks. But if you're going to print your project on a printing press, Pantone inks are still very relevant as "spot colors."
I also set my AI Preferences > Appearance of Black to both Display All Blacks Accurately, and Output All Blacks Accurately. The only exception to this might be when printing on a digital printer, where there should be no registration issues.
Rich black in AI is a screen phenomenon, unless in Prefs > Appearance of Black, you also specify "Output All Inks As Rich Black," -- something I would NEVER do if outputting for an actual printing press. I always set my blacks in AI to "Output All Blacks Acurately" when outputting for a press. If you fail to do this, then on the press you will see any minor registration problems, with C, M, and Y peeking out, especially around black type. UGH!
Good luck! :+)

Questions about CIN tax procedure choice and pricing schemas

Hi all,
I have to implement SAP on a Indian company and I'm verifying all particularity about this country (in particular tax procedures and the great number of differents tax conditions used).
I have two questions about tax procedures and pricing schemas. Every feedback about thse points will be appreciated.
a) To choose tax procedure TAXINN or TAXINJ which are the elements that I have to consider?
I have read lot of documentation about CIN implementation and Iu2019m oriented to choose TAXINN schema, but If possible I would to understand better which are on behalf of one choice or another.
b) To define pricing schemas for India, after check with local users and using examples of documents (in particular tax invoice) actually produced, I have understood that taxes have to be applied on amount defined starting from price list, minus discounts recognized to customer plus surcharges eventually to bill (packing, transport, etc.).
Itu2019s correct for any type of taxes that tax amount is calculated on u201Cnet valueu201D defined at item level or there are exceptions to this rule?
Thanks in advance
Gianpaolo

hi,
this is to inform you that,
a) About point 1 I know the difference between the 2 tax procedures (conditions or formulas). I also have read in others post in the FORUM that TAXINN is preferable. So I would to understand which are the advantages to choose instead TAXINJ. There are particular reasons or it'a only an alternative customizing setting?
a.a. for give for posting the link : plese give me the advantages of TAXINJ and TAXINN
CIN - TAXINN and TAXINJ
b) About point 2, to define which value has to be used as base amount to calculate taxes isn't a choice, but is defined depending by fiscal requirement of the country, in this case India fiscal requirement. I know that, as Lakshmipathi
write as answer on my question, exception could be, but it was important for me to understand if I have understood correctly the sequence of the pricing condition in the schema in "normal" situation.
b.b. you can create your own pricing procedure for this and go ahead.
hope this clears your issue.
balajia

Basic questions about Infocube

Hi, everyone.
I got very basic questions about infocube data handling.
With infopackage, I extracted all the data about employees from R/3.
But there were some mistakes during inputting employee data, like positions,
so I just extracted those employees data once more.
Now I have two requests in infocube, where the first one has some wrong data.
Is there any solutions about this?
I might got it all wrong, so as beginner, any suggestions and explanations will
be grateful.

Hi,
You can manually delete the earlier request by going in the Manage option of the cube. select the request and click on delete icon at the bottom.
Other option is to make setting in the Infopackage to delete similar or overlapping request.
Data target tab --> 6th column Automatic loading / deletion of similar request. --> click on the blank icon --> you will get a pop-up --> select the radio button - "delete existing request" --> Select Conditions --> Infosource are same, datasource are same and source system are same, --> selections are "Same or More Comprehensive "
Assign points if useful
Regards
Venkata Devaraj !!!

A question about compatiblilty of JDBC

Hi, there,
I have a question about JDBC 3.0 in JDK1.4.1.
We build a .jar using JDK1.4.1 and this .jar file
provides JDBC 3.0 interface.
I then tried to call the interface under JDK1.3.1
but it keeps asking me about the getParameterMetaData()
in PreparedStatement.
(The error message like this:
Exception in thread "main" java.lang.NoClassDefFoundError: java/sql/ParameterMetaData dbmaker.sql.JdbcOdbcConnection.prepareStatement(JdbcOdbcConnection.java:257)
I did implement the getParameterMetaData() method,
but I didn't call this method in my testing program.
It's quite strange since when JDK1.2 was release,
we implemented the getBlob() method in
ResultSet class and there's no problem when we
use JDK1.1 run time to call this ResultSet object.
Could any one tell me why? Is this caused by a
compatibility problem between JDK1.4 and the
older versions of JDK?

Hi, there,
Let me outline the condition by examples so that maybe you can help me. PLEASE! Could somebody tell us what's wrong?
- CASE 1:
In JDK1.2, we implemented a new method getBlob which returns the type of Blob (this is done according to JDBC 2.0 specification.) in ResultSet class. We can use the .jar compiled by jdk1.2 in jdk1.1 environment.
e.g. We make a xyz.jar by jdk1.2 and the xyz.jar includes new method getBlob in ReaultSet class. Then, one java application including ResultSet class CAN run under jdk1.1 with xyz.jar, if the method ResultSet.getBlob() is not called.
- CASE 2:
BUT, the following case which is the same as in the above condition will fail in jdk1.3 environment.
In JDK 1.4, we implemented a new method getParameterMetaData() which returns the type of ParameterMetaData. (BTW, this is done according to JDBC 3.0 specification.) in PreparedStatement class. We CANNOT use the .jar compiled by jdk1.4 in jdk1.3 environment.
e.g. We make a ttt.jar by jdk1.4 and ttt.jar includes the new method getParameterMetaData() in PreparedStatement class. Then, one java application including PreparedStatement class CANNOT be run under jdk1.3 with ttt.jar, even when the method PreparedStatement.getParameterMetaData() is not called.

Question about LRU in a replicated cache

Hi Tangosol,
I have a question about how the LRU eviction policy works in a replicated cache that uses a local cache for its backing map. My cache config looks like this:
<replicated-scheme>
<scheme-name>local-repl-scheme</scheme-name>
<backing-map-scheme>
<local-scheme>
<scheme-ref>base-local-scheme</scheme-ref>
</local-scheme>
</backing-map-scheme>
</replicated-scheme>
<local-scheme>
<scheme-name>base-local-scheme</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>50</high-units>
<low-units>20</low-units>
<expiry-delay/>
<flush-delay/>
</local-scheme>
My test code does the following:
1. Inserts 50 entries into the cache
2. Checks to see that the cache size is 50
3. Inserts 1 additional entry (as I understand it, this should cause the eviction logic to kick-in)
4. Checks the cache size again, expecting it to now be 20
With HYBRID and LFU eviction policies, the above logic works exactly as expected. When I switch to LRU however, the code at step 2 always returns a value significantly less than 50. All 50 inserts appear to complete successfully, so I can only assume that some of the entries have already been evicted by the time I get to step 2.
Any thoughts?
Thanks.
Pete L.
Addendum:
As usual, in attempting to boil this issue down to its essential elements, I left out some details that turned out to be important. The logic that causes the condition to occur looks more like:
1. Loop 2 times:
2. Create named cache instance "TestReplCache"
3. Insert 50 cache entries
4. Verify that cache size == 50
5. Insert 1 additional entry
6. Verify that cache size == 20
7. call cache.release()
8. End Loop
With this logic, the problem occurs on the second pass of the loop. Step 4 reports a cache size of < 50. This happens with LRU, LFU, and HYBRID-- so my initial characterization of this problem is incorrect. The salient details appear to be that I am using the same cache name each pass of the loop and that I am calling release() at the end of the loop. (If I call destroy() instead, all works as expected.)
So... my revised question(s) would be: is this behavior expected? Is calling destroy() my only recourse?
Message was edited by: planeski

Robert,
Attached are my sample code and cache config files. The code is a bit contrived-- it's extracted from a JUnit test case. Typically, we wouldn't re-use the same cache name in this way. What caught my eye however, was the fact that this same test case does not exhibit this behavior when running against a local cache directly (as opposed to a repl cache backed by a local cache.)
Why call release? Well, again, when running this same test case against a local cache, you have to call release or it won't work. I figured the same applied to a repl cache backed by a local cache.
Now that I understand this is more a byproduct of how my unit tests are written and not an issue with LRU eviction (as I originally thought), it's not a big deal-- more of a curiosity than a problem.
Pete L. Attachment: coherence-cache-config.xml (*To use this attachment you will need to rename 545.bin to coherence-cache-config.xml after the download is complete.) Attachment: LruTest.java (*To use this attachment you will need to rename 546.bin to LruTest.java after the download is complete.)

A very simple question about WF

hi experts
I would like to ask a question about workflow
as u may know there is 'Loop' step in workflow, but I am confused when should I use Loop?
Is this step used for processing internal table? if yes, why shouldn't I create a custom BOR method and pass the entire internal table to the method?
many thanks

hi
loop step for not process the internal table,
this is used to process the some steps repetely until condition True or False.
we have two loop steps is there
WHILE AND UNTIL.
Thanks
sitaram

Question about inserting Sysdate (SQL)

Hi all,
I got a question about records insert when one of the fields is sysdate.
I have to store several records representing a log, generated by the execution of a database package.
Inside my package I wrote an internal procedure devoted to insert a record in my log table for each processing step I wanted to trace (I call this proc each time I want to record a certain step of my package).
My log table structure is: PREC_LOGS(log_date DATE, log_message VARCHAR2(1000)), no constraints at all.
Database ver. 8.1.7.1.0 - Production for VMS O.S.
The 'problem' occurs when several records have the same sysdate (DD-MM-YYYY HH24:MI:SS). In this case, if I select log_date,log_message ... order by log_date, the list of records I get respects the sort condition, but when several records have the same sysdate (DD-MM-YYYY HH24:MI:SS), it doesn't respect the order of the steps theoretically inserted by the internal proc.
Resault
25-07-2002 11:10:20 ........ (date changed)
25-07-2002 11:10:22 Loading data for order nr. 82364 (step 3)
25-07-2002 11:10:22 Verifying order nr. 82364 (step 2)
25-07-2002 11:10:22 Procedure started for order nr. 82364 (step 1)
25-07-2002 11:10:22 Updating conditions for order nr. 82364 (step 4)
25-07-2002 11:10:22 Procedure accomplished for order nr. 82364 (step 6)
25-07-2002 11:10:22 Commit changes for order nr. 82364 (step 5)
25-07-2002 11:10:24 ........ (date changed)
Please ask for more detail if someone is interested in replying...I realize it's not a very clear explanation of my issue.
Thanks, Marco

Hi
Add a field to the table that is that uses a sequence
PREC_LOGS(log_id NUMBER(30),log_date DATE, log_message VARCHAR2(1000))
Create a database sequence
The insert statement now becomes something like
INSERT INTO PREC_LOCS(log_id, log_date, log_message)
VALUES (sequence_name.NEXTVAL, SYSDATE, 'Some message');
Then order by the log_id when you do your select.
Daniel

A question about users assigned roles extraction

Dear all,
I have a question about users assigned roles list extraction. I need the list of the users who have already been created along with their assigned roles. According to what I found on Google, there is a table named AGR_USERS which provides the roles assigned to each user. Yet, this table provides only the SAP ID of each user along with the assigned roles. What I need more is to have also the first name and second name of each user.
So, do you know any table providing at least the following information:
1) First name of each user
2) Second name of each user
3) SAP ID of each user
4) All assigned roles to each user.
NOTE: I really need to have first name and second name in separate columns
Thanks in advance,
Dariyoosh

>
Shekar.J wrote:
> Agr_users for the user ID and role assignments
> USR02 to check the validity of the User ID
> and USER_ADDR for the first name and last name
>
> You can create a Table join of the above 3 tables to retrieve the data you require
Thanks to you and others for your attention to my problem
I don't know anything about ABAP programming, is there any transaction allowing to create this join? As it seems to me the column "UNAME" in the table "AGR_USERS" and the column "BNAME" in the table "USER_ADDR", both refer to the SAP ID of the user. As a result the condition of the join would be "WHERE (UNAME = BNAME)", is there any transaction/programme allowing to create this join?
Thanks in advance,
Dariyoosh

MM Question about princing condition

Similar Messages

Maybe you are looking for