MM Report Materials and G/L

Hi All,
Is there a standard SAP report that will list all materials with their corresponding G/L accounts (for purchasing and sales)? If so, please let me know.
Thanks

Hi,
There is no such report and the problem is that the connections are not via the material number they are via the Valuation class (which is meant to be used to group together similar materials that share the same GL accounts).
So go to the automatic account determination config (not direct via OBYC), use the following menu path
Material management > Valuation and account assignment > Account determination > Account determination without wizard > Configure autiomatic postings
Clear any warning pop ups and then select the GL accounts button, next to simulation.
Enter the company code and plant (any plant in the valuation area group you are interested in, or leave this blank) and when you execute this you will get a very useful list of ALL accounts that are posted to by MM and SD etc. (at least the ones due to movements, purchases, isseues etc.).
It even shows you the account modifiers etc. that are used and their affect.
I would recommend this report to anyone because this is a really useful report to use to check for errors in the auto account set up and it often reveals one or two surprises.
Steve B
Steve B

Similar Messages

BOM report showing materials and their prices

Hi all,
I'm trying to spool a report that shows the BOM materials and all their different prices so I can sum them up and know the total.
I tried using CS13. I changed the layout so the display can include the standard prices of the materials(as maintained in the material master) but nothing is displayed at all.
Is it possible that I'm using the wrong tcode? What am I doing wrong and how can I get the report?
Thank you very much.

Dear Uzoamaka,
Check this links
[Multi level BOM explosion in CS11/12/13 Cost of items are not displayed;
[CS11,CS12,CS13;
Regards
Madhu

Report to display materials and prices

Hi everyone.
Pls. I would like to know if there is a report to display materials and prices, I mean prices from material master accounting view.
Thanks a lot.

Dear Frnd...
There is no such report... as per my knowledge... may be I am wrong...
But you can use Table MBEWH and develope report for the same..
Regards,
AMit P Hiran
njoy SAP..
njoy Lyf...

Materials and prices

I have to write a report to extract the materials and their prices for a particular division. I appreciate if anyone can tell me how i can proceed with this

Hi,
Please check transaction code 'V/LD' and select pricing report '15' (Material Price).
If this report is not suitable to your requirement then you can copy this report (/1SDBF12L/RV14AK15) to Zxxx and make necessary changes.
Hope this will help to start with
Regards,
Ferry Lianto

Report generation and Info Structure updation

Hi
When are the Tables: S094 and other info structures gets updated?? For Example S094 is updated with materials and has the stock details and it have Goods issue MRP Goods issue Valuation etcu2026 I tried creating a material and created a PIR and run MRP for it and checked the tables its not updated in the S094 table.
Also I am not able to execute Transaction MCEC and MCEA transaction for generating reports for LTP run.
Is there any configurations that has to be done for the above??? Like the LIS (Logistics information system settings) that has to be done for generating the above reports.

Hi,
See different links about LIS :
What's an infostructure ? : http://help.sap.com/saphelp_47x200/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm
Events Updating in SIS : http://help.sap.com/saphelp_47x200/helpdata/en/c1/3756d5449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c1/3756d5449a11d188fe0000e8322f96/frameset.htm
For SIS, all documents (if custo is activated) can update LIS :
- Sales order --> Event : VA
- Delivery --> Event : VC
- Invoice --> Event : VD
If you look at the custo of update rules for the standard analysis S001, you can see the link between key figures and event --> Tcode : MC26 for Infostructure S001 / Update group 1)
Regards,
Lionel

Differences between reports LL01 and LS24 for negative stock

Dear friends,
Could you tell me the difference between the reports " Warehouse Activity Monitor" (LL01) and "Stock Per Material" (LS24)..
When the negative stock option is chosen ,LL01 is not displaying certain materials with the negative stock.However these materials with the negative stock are displayed in the report LS24.
What could be the reasons?
Thanks.
Regards,
Krishnan.

Hi
There are a couple of things to tell you here.
Firstly LS24 - This shows one material only and you will see where this material is all over the warehouse.
Secondly there is an alternative if you want to see all materials and that is LX02 and in the st type field put *** and you will see everything in the warehouse and if you sort on the available qty field (descending I think but try both) all of your negatives will come to the top of the screen with the largest negative first.
Thirdly LL01 This will only show negative stocks for the storage types that have been included in the configuration for this. Also the negatives in LL01 will only appear after the amount of time you have set in the congiguration whereas in LS 24 you will see them immediately.
So for instabce if you set st type XXX to show negatives after 24 Hours you will not see them in LL01 for 24 Hours but they will be in LS24 AND LX02 immediately.
This does not mean that LL01 is wrong just that youi need to make some adjustments in the config and be clear as to what you want to see and when.
I hope that this helps

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

CR XI R2: Crystal Reports freezes and crashes when I try to open a report

I added this question as a Reply to a message by nic2deep a month ago <Crystal Reports freezes every time I try to open a report.>, but got no response so I thought I'd try again on my own.
I have 2 laptops with CR XI installed (same problem from original R2 through SP 5). The old laptop is an IBM Thinkpad R51. The new one is an HP Elitebook 6930p. Both have the exact same software and versions of Win XP and network security.
If I try to open a report that has an "invalid printer" selected, it will open in the old IBM (with the message, 'This report uses an invalid printer. The default printer will be used instead'), but on the new HP, it freezes and I have to do a CtlAltDel to get out.
I've tried everything Don Williams suggested to nic2deep:
1) Open Contol Panel and add/remove programs and select CR. Do a repair install and if possible use the Custom Options and install all DB drivers and Export options, except Lotus Notes, unless you' re using them.
Results: Tried many times with no effect.
2) It may be that your firewall setting or anti-virus software is blocking access to system files or resources. When you do the repair install make sure to disable them and un-plug yourself from the network so you protect your PC while they are off line.
Results: Firewall was always OFF because network security handles all that. Can't turn off anti-VIrus, but both computers have the same antivirus system anyway.
3) Look in the System and Application Event logs in Admin tools; it may give you a clue what your PC is trying to get to and being denied.
Results: The only thing that is logged in Admin Tools when this happens is a "Security/Privilege Request" with no errors.
Clearly, when CR in the HP looks for the printer selected in the report and doesn't find it, that causes CR to freeze.
Any idea what difference between the 2 machines could cause this? Something in the Registry?
This is a royal pain, because I can only be on one computer at a time.
Thanks in advance.

Hi Debi,
Because in CR XI R2 it is WYSIWYG meaning we use both the display and the printer drivers to render the report. Same as what PDF does. If we can't find the printer the report was designed against, and all the placements of each object is dependent on the printer when designed, we have to default to your default printer to be able to calculate internally when to render the report objects and format the layout thus the message from CR indicating so.
Basically CR dynamically builds the page layout dependent on the local system. Also the reason why CR requires a default printer to be installed, if it's not then we use Microsoft's Generic Print driver. It's not that reliable either but we have to use something.
And another "for your info" is the same for our database drivers. Example, if you create a report off of MS SQL Server and then you want to view the SQL CR generates you need to log on first. This way CR can query the DB client and generate the SQL according to the DB. If you just want to see the SQL you could just set location to Access, problem with this is because CR dynamically generates the SQL according to the DB you set lcoation to we may change the SQL Statement and not actually show you what the report uses when connecting to the real database.
One of the side effects of supporting so many DB's and Printers and Video drivers. Sometimes drivers do non-standard functionality which CR did not anticipate or code on how to handle.....
This all changed in CR 2008, we are not as dependent on the printer driver but this created a whole new set of problems if you hadn't noticed from all the Printer problems posted.... But we are going back to the CR XI R2 printer functionality model to resolve all of the issues....
Thanks again
Don

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

Crystal Reports 9 and SQL Server 2005 default parameter values

We're using Crystal Reports 9 and upgraded from SQL Server 2000 to SQL Server 2005.
I'm noticing a very weird problem which I wonder if anyone else has experienced (and hopefully found a resolution for). It appears that in using Crystal with SQL Server 2005 stored procedures, if we have default parameter values in the stored procedures, the default parameter values get completely ignored if you pass in a NULL value from Crystal!
For example, if you have a stored procedure that begins like this:
ALTER Procedure [dbo].[StoredProcedure]
@Param1 VarChar(200) = '',
@Param2 VarChar(200) = ''
AS ...
both @Param1 and @Param2 have a default value of an empty string, and therefore should become empty strings if nothing (NULL values) gets passed in for them.
But, like I said, what I'm finding is that with Crystal calling the stored procedure with NULL @Param1 and @Param2 values, they never become empty strings, but rather remain as NULLs.
This was never a problem with SQL 2000.
Very perplexing. Anyone else every experience this?
Thank you.

Please ignore my earlier post -- answered my own question.
NULL parameter values do not get replaced by default values in SQL -- that is normal behavior in both SQL 2000 and SQL 2005. Just goes to show, that no many how many years programming experience you have, you can still get tripped up sometimes : (

Need Single Billing Document for Materials and Services in Sales Order

Hello Friends,
I am selling FERT items and DIEN items in the Sales Order.
Document flow as follows:
Finished goods - Order-Delivery-Billing
Services - Order-Billing
In this process 2 seperate billing documents are created
i. Delivery Related Billing document for Finished goods.
ii. Order related Billing document for services.
I want to create a single billing document for both the items (FG & Services) in the sales order.
Please suggest.
Thnx.

Sorry for the delay friends.
Somebody suggested me to make services 'relevant for delivery' to ensure single billing document.
What I did were the following steps:
1. Copy Item Category TAD to ZTAD and make is 'relevant foir delivery'
2. Assign Item Category ZTAD to Sales Order type and Item Cat Group 'LEIS'
3. Go to Deliveries Item Categories and through new Entries add ZTAD. Make ZTAD relevant for Picking.
4. Go to copy control 'Order to Delivery' and insert ZTAD in Item Categories relevant for this combination.
Now when I create sales order with materials and services, they pass over to the delivery document and in the Services item, storage location/plant is greyed out. Only the picking quantity is required to be filled.
PROBLEM :
I am not getting the price of Services item in the billing document.
Billing document copies all line items (tangible and intangible) from Delivery Document
It takes the services item details/quantities etc. to VF01 but the price comes '00.00'
Any suggestions.
Is this legally viable? Someone told me its not legally correct.
Thanks.
Mohammed

Tables for materials and services in SRM

Hello,
In what tables can I find the information of materials and services of the COMMPR01 transaction, especially the Orderunit-field?
This field is not stored in the COMM_PRODUCT table.
Thanks,
Aart

Thanks Jagadish,
I looked at the tables but I can not figure out how I can get from the product GUID (product from COMM_PROD) to the correct Orderunit of the material in the COMM_PR_PUR_1 which has the ID of an order set?
Thanks,
Aart

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Report, Form, and Data Component portlets go to error page

I am able to add Report Form and Data Component portlets to my page, but when I click on the define button it takes me to my error page.
Have I missed configuring something?

hello friends,
thanks for replly,
i m using command noe after table node in main window, but i want display the data below the main window , it is diplaying new page as required but only missing data below the main window.
to be more clear i want to print all the window in first page then only go for next page , so is there any condition or parmeter in main window to go next page only agfter completion of first page.
dont worry abt points.

Creating a print button to call a Report Query and pass filters

If i use the REPORT QUERY option in APEX 4 to create an statement that is the same one used in an interactive report, can I create a link or button to the REPORT QUERY and pass all the session and filter information from the interactive report to the report query?
This way I can have the interactive report screen where the user can do all sorts of modifications and such and then pass those to the REPORT QUERY so I can call that from a custom link or button.
You may ask "why does he need another print button?"
Answer: I am using a view that has some embedded HTML tags to format the output really nicely. The HTML download version created by the interactive reports works beautifully. The customer also wants a PDF version (meh) which does not render the HTML tags and actually echos them as part of the text. I found that I can create another view that uses the CHR function to create all the breaks and such I was doing with HTML and these do render properly in PDF. So, I figured just have 2 reports: 1 Interactive and 1 using a REPORT QUERY. I just want to call the REPORT QUERY version but use the Interactive Search form to set all the parameters.
Or, am I over thinking this and there is an easier method?
I made a previous post where I showed how I got the APEX printing to work and i hoped that helped someone out - fixing this issue would put the whole thing to rest.
Thanks

Is BI Publisher desktop (MS Word add-in) a possibility? This would allow you to use MS Word to create your output template (RTF) that would result in a properly formatted PDF. Of course, you'd have to right an updated version of the query without HTML embedded. Just thinking outside of the box.

MM Report Materials and G/L

Similar Messages

Maybe you are looking for