MM41/MM42/(MM43) - Sales view: How to add own input validation for CALP-END

Hello.
I am looking for an easy way, if any to create an own input validation for a certain field in the article master on the sales view tab. In addition to any standard input validation I would a like to add an own validation (for CALP-ENDPR) depending on the input.
How can that be achieved in the easiest and proper manner - in general and for the specific case?
There are no screen exits etc. here, if I am correct.
Any ideas?
Thanks.
C.N.

Hi,
Please refer the below link.
This is for MM01. I understand that you are into Retail system. Hope the same processing logic can be done in your scenario also.
saptechnical(dot)com(slash)Tutorials(slash)ExitsBADIs(slash)MM(slash)MM01(dot)htm
Replace the bracket words with the correct symbols.
With Regards,
Sumodh.P

Similar Messages

How to add a input field for personal ID in My Account - Personal Data

Hi,
I am new for B2C shop development. Now I have to add a ID number in Personal Data of My Account in B2C shop. This field is in the assignmemnt block of Identification Number, but it seems not easy to add this field in B2C shop JSP page.
Gurus, would you please give any guide? Thanks!
BR,
Hao

Hi Hao,
Please download these files for which you need marketplace login id.
Development Guide
https://websmp210.sap-ag.de/~sapdownload/011000358700000469462006E/
Tutorial
https://websmp206.sap-ag.de/~sapdownload/011000358700006120622006E/
Regards,
Arshid

Add custom MARC fields in MM41, MM42, MM43?

Hi all,
I need to implement 4 custom fields (aleady appended to MARC) to MM41, MM42, MM43 - I know how to add the new subscreen from the configuration path Logistics General/ Material Master/Configuring the material master (have also read OSS note 44410).
My questions are:
1) Will this configuration work for Articles (as opposed to materials) & what are the differences?
2) Is there a Badi needed to transfer custom fields to MARC in MM41/2/3? I can't find one - the fields only need screen validation and nothing else.
Many thanks in advance

Hi,
Please refer the below link.
This is for MM01. I understand that you are into Retail system. Hope the same processing logic can be done in your scenario also.
saptechnical(dot)com(slash)Tutorials(slash)ExitsBADIs(slash)MM(slash)MM01(dot)htm
Replace the bracket words with the correct symbols.
With Regards,
Sumodh.P

How to add a new tab for the project?

Dear All Experts,
    Could you tell me how to add a new tab for the project?
    Pls refer to the screenshot as below:
Thanks!
Xinling Zhang

Hi,
    The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
    And in cj02, there is no this tab also in the wbs detailed screen,
Thanks!
Xinling

How to add a search help for a field in Screen Personas?

I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
I found a property in the help document named "IsLookupSupported". Is it the key? But I saw it was gray in the field I created, and its value is "false". I could not change it.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

Hi All ,How to add a new field for MEDRUCK if we havea ZMEDRUCK

Hi All ,
        How to add a new field for MEDRUCK if we have a ZMEDRUCK
Req: If I want to add a new field for the following text editor line :
IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
In that we will have
&ekko-waers&    &komkfkwrt&
(currency)       (numerics)
Pls send the Code to make these changes .Pls its urgent
Thanks&Regards.
Bharat.

Hi
If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
If that field is not there in the any of the structures then you can define a variable using define command
/: DEFINE &VAR&
/ &VAR& = <some value>
or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
<b>Reward points for useful Answers</b>
Regards
Anji

How to add a document type for the residence status GB in infotype 48

Hi Team,
How to add a document type for the residence status GB in infotype 48.
Please answer this at the earliest.PFA screnshot.
Thanks
chris

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

How to add a related content for a particular document in UCM

Hi All
How to add a related content for a particular document in UCM. On which table it stores all the related document details. Can anyone suggest me a document which helps me to know how to add related contents for a document
With thanks and regards
Anoop

I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
When a relationship is created you may watch it also from either end (again INFO is the starting point).
It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

QUESTION: HOW TO ADD OWN SUBJECT IN CCMS

Hi, All
QUESTION: HOW TO ADD OWN SUBJECT IN CCMS
In NW2004s SP20, kernal 4.6C WebAs 620
I add paramater in RZ21, Method: CCMS_OnAlert_Eamil , Paramater: SUBJECT_ALERT value CCMS Alert from XDV
But nothing changed when I received e mail it same look like CCMS alerts XDV 20080528 104346
How can I do that please advicse
Thanks

HI,
Refer
Blog to implement the email notification:
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies
http://help.sap.com/saphelp_nw04/helpdata/en/ce/c193d07a7343ff9a81db1bdc97b2f7/frameset.htm
Monitoring with Solution Manager
http://help.sap.com/saphelp_nw04/helpdata/en/1a/40f83ee0e66856e10000000a114084/frameset.htm
Configuring the Alert monitoring of Solution Manager 4.0
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 8:07 PM

How to Add the title name for Graph in Excel

Dear Friends
I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
Jayavel
Solved!
Go to Solution.

Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD.
Ultimately you will need to look up the information in MSDN.

How to add hotmail to mail for Yosemite

how to add hotmail to mail for Yosemite

Mail/Preferences/Accounts - click the + sign and add the account.
Hotmail Settings See post by Csound1

Custom display template - how to add anothe display template for refimement item?

Custom display template - how to add anothe display template for refimement item?
I add a new filter_default_custom.html file and want to create new refinement item display template to point to it
keren tsur

Not 100% if I understood the question, but if you uploaded your template to the Master Gallery and the corresponding .js file has been created, you can open the refinement config panel and specify the result type you want to map to your custom template.
http://www.eliostruyf.com/part-1-create-first-search-refiner-control-template/
Kind Regards
Bjoern
http://www.sharepointviking.com
Twitter: Follow @bjoern_rapp

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

SQL Server Distributed Partitioning Views how to add a new node online

We are using distributed partitioning views in SQL Server 2012 Enterprise Edition for scaling out our data across more than one servers. Now we faced to question how to add a new node (server) into the scale outed db servers system without sending the servers
down, so our users will be able to use them during the process as well.
For example we have 4 servers with scaled out data. When we add the new empty server, the CHECKINGs for the partitioning columns should be reorganized. But during the process the partitioning views are not working.
The High Availability, Always On or Failover Cluster approaches seem are not resolve the problems.
So my question is how to add new node online?
KH

Thank you Erland for the reply.
Yes, it's sounds as possible solution but has some not resolvable nuance in it. Let's say we copied some data from Node5 to new added Node6. Let's assume in Node5 we had data in Table1 with partitioning column's values 100,101,102,103,104,105,106. Now
we want to copy part of the rows with partitioning column's values 103,104,105,106 from Node5.Table1 into Node6.Table1. With this Node5 will contain less data and will work more quickly (less IO, less CPU usage etc), and the rest data will be contained on
Node6. But because of Node5 is already in use, the Node5.Table1 contains CHECK CONSTRAINT = ParttionColumn should be from 100 up to 106. This is check for Node5. The Distributed Partitioning Views are already using the CHECKs to identify what server should
be used to get data from.
Now when we copied part of the Node5.Table1 rows to Node6.Table1 the views are still using the 103-106 rows from Node5.Table1 because the CHECK points there. Then we include the newest Node6.Table1 in the distributed partitioning views. OK, but we should
set some CHECK on new Node6.Table1 which will be used by views. We can't set intersecting checking like Node5 has CHECK 100-106 and Node6 has CHECK 103-106. We also can't edit Node5 check and set it 100-102 untill the data will be removed in it. But this means
that the data will not be available during the execution.
So, any ideas ?
KH

How To Add a new column for ZPR0 price in open sales order report ??

HI,
my requirement is To Add a new column for ZPR0 price in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

k

MM41/MM42/(MM43) - Sales view: How to add own input validation for CALP-END

Similar Messages

Maybe you are looking for