Modify DSN Messages without using Shell.

Hi Guys..Wanna Know where are DSN Messages actually stored on the file-system ? Although using " Get-SystemMessage -Original " gives you a logical path and detailed content of system default DSN Messages but is there a way out to modify DSN Messages
without using shell from actual file-system itself. Please suggest ?

Hi,
Based on my knowledge, we can only use command to modify DSN messages. This is something that has to be done from the Exchange Management Shell.
Here is an article about how to modify the DSN message for your reference.
View or Modify an Existing Custom DSN Message
http://technet.microsoft.com/en-us/library/bb125230(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Sending non-SOAP XML message without using JMS

Hi, I would like to build application to exchange non-SOAP XML message without using JSM. Could you please tell me which Java Technology that can help doing this? Thanks in advance

to be more specific, could you please tell me any open source jaxm-like that support non-SOAP XML?

How to Send Emails for failed messages without using Alert

Hi Experts,
In our project, we need to trigger Emails for the failed messages in SXMB_MONI / Adapter Engine without using Alert Framewrok.
Please let me know the below :
1. Is this really possible to avoid Alert?
2. If possible, then can we accomplish this by creating any PI Scenario? Please provide me some knowledge.
3. Can we do it by writing any ABAP Code? If ABAP report can make it, then please provide me the code/ tables which will be needed. If any Blog/ Wiki is there, then please let me know the URLs.
Thanks,
Nabendu.

Hi Nabendu,
If your customer asks for mails with specific text for message failure, tell that it is not possible. Because Message will go through several engines like Adapter Engine, Integration Engine, BPE. You can not generate mails for the message failures in all these areas with out standard alert mechanism. These are pure technical alerts which only PI people can understand, not business alerts.
Example: assume your sender channel is unable to connect FTP Server, in this case you can not generate even though you will develop adapter module to generate alerts.
So for message validation only you can send mails not for message failures.
thanks,
madhu

How to split messages without using Message split (BPM)

In file to file scenario how to split messages coming from file without using Message split (BPM)

Thank you very much.

Can I permanently delete messages without using outside app/website?

Even though I've deleted my messages the usual way on my iPhone 4S, it's not properly deleting them so I've still got 1.4gb of messages stored when I look at usage. Very annoying as I'm running out of space for stuff like music so could really use any extra space, and have no desire to store messages.
Obviously I've searched it up but it seems the only way to get rid of them is using seperate websites like iBackUpBot which I don't really want to do - is there any other way?
I don't know why my messages are being saved, some people seem to think it's a glitch in the iOS from when the phone was first set up?
Any help would be appreciated!

How did you determine that "1.4gb of messages" is stored - there is no such display. IF you're referromg tp "other" memory, that includes a lot of other things such as the entire iOS and all app data and is about as low as you can get.
The only way to get the "other" a little lower would be to restore the phone using iTunes as new, without restoring a backup.

Terminate messages without using BPM?

Hi,
Does anybody know if you can terminate messages with content based routing without ending up with messages in error state.
example
I receive IDOCs from R/3 where some should be handled and sent to a receiving system and some should not be handled at all and thus terminated. If you define a content based routing for just the ones which are supposed to be handled the rest of the messages end up in error state since no receiver is found. Ideally it would be possible to route messages to a "null" receiver without getting errors, anybody know of such a possibility? I know this can be achieved with a BPM but in this case that creates a lot of unnecessary workload for limited functionality...
Kind regards Johan Göthberg

Hi Johan,
you can try creating a dummy receiver - like ftp/file receiver and send those wrong message to this receiver?
this way wou'd have everything correct and all "wrong" message in one place (ftp or something)?
Regards,
michal

How can I send a photo through messaging without using photo stream?

Ever since I updated my phone I can't send a pic without photo streaming and not everyone has an iPhone so I can't send pics to everyone I want to/

Well, if you have iOS 6 on your iPhone 4, and click on a photo in your photo library, then click the "share" button in the lower left, you see these options:
Mail
Message
Photo Stream (OK, you don't want that one)
Twitter
Facebook
[4 other options not directly related to electronic sharing]
So I would say you have a plethora of options.

TS4268 I want to use message without using imessage that only go to other iphone- ipad products. I want to reach others with other telephones than i- products. I go to setting- tap dissconnect i message - but no use. Apple products seem so difficult - onl

I go to Settings and want to dissconnect imessage- because imessage only can go between apple items like ipad and ipod. I want to be able to reach other s with other smartphones as well. What do I do ?

With an iPad you can't. At least not just with the native app. iPads do not support SMS messaging. you will need to look into alternate messaging apps from the app store, such as Text Plus.

Non-Blocking SOAP-Message WITHOUT Messaging Provider?

Hi there!
Is there any possibility of sending a non-blocking SOAP-Message WITHOUT using a MessagingProvider?
I�m thinking about a Service which doesn�t need to give any Feedback!
Thanks alot!
Eric Sommer

I believe that JAXM does not support a non-blocking send without a messaging provider. However, the receiver can simply return an empty message and the sender can ignore the reply:
public SOAPMessage onMessage(SOAPMessage msg) {
// process message
return messageFactory.createMessage();
}In fact, the receiver may be able to return the same message it received. I've tried this and it works but I didn't dig into the JAXM spec to be sure it's legal.
Mike

How do you create an array without using a shell on the FP?

I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
do not want to go that route.)

Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
If I seem a tad green... well I am.
I hope you understand the LabVIEW environment and icons are still very new to me.
Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
"I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
Attachments:
Initialize_Settings.vi ‏55 KB
Save_Settings.vi ‏52 KB

How can I modify column width in a spreadsheet report without using an Excel template

I currently use the LabVIEW Report Generation toolkit in LabVIEW 2011SP1 to create simple spreadsheet reports that I can build/print without having Microsoft Office products installed. I really like being able to do this, and it allows me to generate nice on-demand data reports - I'm also not tied to having Office installed on the system I'm using, so this works on just about any test fixture I can install the software on.
I recently have a requirement that I must have variable-length columns in my report. I currently use the VI "Append Text Table to Report" in order to create a text table, but the column width requirement is that all columns must be equal width UNLESS I use an Excel Template file to define my column widths.
My questions are:
Is it possible to create a text table and define per-column widths without using an Excel Template? If so, how? My report mainly has a lot of small numerical values for the columns, but some columns contain system names or status messages - I really hate the longer text blocks wrapping and taking up so much real-estate when if I could control the column widths I can get all my data on a single line.
I'll admit I haven't tried this myself yet, but if I use an Excel Template will that require me to have Excel installed on the PC in order to print/generate reports?
Is there a recommended way (with an example) of generating a text table in a report with or without using the "Append Text Table to Report" VI that allows me to have custom column widths that doesn't require me to manually build a custom print page? If I do have to create a custom print page, what would be the most straightforward approach?
Thanks!
-Danny

Sure, I'll provide a pared down example that demonstrates my use-case:
I have a control to the VI that takes in a 2D array of strings representing the data I want printed in a table. I am generating a standard report, adding a table to the report, and printing it. The first VI is "New Report.vi", the second VI is "Append Table to Report.vi", and the third is "Print Report.vi", all found standard in the Report Generation palette.
Note that the "Append Table to Report.vi" has an input parameter "Column Width" with a default value of (1). This input parameter is a single input parameter, which defines the column widths of ALL the columns in my table - hence, with the VI the way it is, all my columns will be 1 inch wide.
I find myself needing to be able to define per-column widths, not just a single global column width parameter.
The only way I have found to do this is by using an Excel template file. The "New Report.vi" takes in a "template" parameter, and if used, the report generation toolkit can be set to ignore the "Column Width" input parameter on the "Append Table to Report.vi" by setting the width value to -1. Instead it will launch Excel, open the template file provided, build the table using the template, will close Excel, and will attach the generated table to the report. However, I have a strict requirement that Microsoft Office NOT be required to be installed on the computer.
So, without using Excel, is there a way to generate a table in a report and define the width of each column individually?
-Danny

Message Spiltting Without Using BPM in XI-7.0

We are using XI-7.0.
We need to spilt the message from 1 to many without using BPM based on following conditions.
We need to spilt the one message in many messages depending on the segment records of ZORDER3 and ZORDER2.
If IDOC message do not have segment ZORDER3 then message needs to be spilt based on the segment records of ZORDER2.
In the following example, one IDOC message would come from SAP system and that message needs to spilt into 7 messages for the vendor's system.
Any help will be appreciated.
Source message: IDOC-ZORDER
Segment:ZORDER1(Max occ-1)
PO:4600000010
LineItem:00010
Plant:5000
 Segment:ZORDER2(Max occ-999)
 ServiceCode-100000
 Segment:ZORDER3(Max occ-99)
 CostCenter:CC123456789
 CostDesc:CCTest1
 CocstCenter:CC23456795
 CostDesc:CCTest2
 WBSElement:WBS45698712
 CostDesc:WBSTest1
 WOrderNo:WO56987412
 CostDesc:WOTest1
 ServiceCode-200000
 Segment:ZORDER3(Max occ-99)
 CocstCenter:CC78956795
 CostDesc:CCTest7
 WBSElement:WBS492871
 CostDesc:WBSTest5
 WOrderNo:WO98757412
 CostDesc:WOTest6
Target Message Structure
POData(1:1)
 Level1(1:1)
 PO&LineItemNo:460000001000010
 Plant:5000
 ServiceCode-100000
 Level2(1:1)
 costobjectID:CC123456789
 costobjectDesc:CCTest1Thanks in advance!
MP

Mrudula,
If you give the target structure and occurrences of it , then it will be more helpful. Also please quote on wht basis the message needs to be splitted, coz the condition is not clear, Please give the condition too.
Best regards,
raj.

Multi-mapping with message bundling but without using BPM

Hi all,
I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages created containing 50, 50 and 20 records each.
I am wondering whether this multi-mapping is possible without using BPM, as the typical no. of records in the source message are in the range of 600 to 800, and rarely (twice or thrice a month) they shoot up to 2000. So my concern is whether BPM would affect the performance. We are using PI at SP12.
Regards,
- Shankar.

Sorry for late reply.. Well the sender is a file system, which sends a single XML file containing multiple records. (I mean I have a sender file adapter that polls periodically from a specific path and picks up the file when it is available)
The no. of records in the source file may be different in each run. The requirement on the receiver system is that it can handle a file which has maximum of 'n' records only (say 50 in my example)
Now the sender file can contain any no. of records. It may contain 10 on some day, or 200 the next day, or 120 on the third day. But on the receiver side, I want the files to be created such that each will contain AT MAX 50 records.
So, if source file has <=50 records, then there will be only 1 target file having the same no. of records.
If source file has between 51 to 100 records, then there will be two target files. One will have 50 records, and the second will have remaining records.
And so on..
Regards,
- Shankar.

How to Send message to MQ without using JMS Receiver Adapter

Hi Frnds,
Actually i am working one File to JMS scenario,I have to send message to MQ,What are the different ways we can send message to MQ without using JMS Adapter.
Regards,
Raj

Hi Ramesh,
Thanks for your replay,could you please eloborate how to integrate that one with XI,and how to use in XI?
regards,
raj

Get the message attribute values in Orchestration without using property promotion

I have the following schema :
Now I want to get the values of FName,LName in orchestration without using any property promotion ?
Prakash

There are also multiple ways of creating the Xpath:
- Full path with namespaces - Rahul Madaan showed this one
- Full path without namespaces:
FName = xpath(InputMessage, "string(/*[local-name()='Root']/*[local-name()='IntField'])");
I think this method is handy if you have multiple schemas with similar structure but the namespace
changes. This is also easier to read and less prone to errors if there are any changes.
If you for example wanted the node #3, then it would be
FName = xpath(InputMessage, "string(/*[local-name()='Root']/*[local-name()='IntField'][3]/*[local-name()='IntSubField'])");
- Jump directly to the field/node you need (this one works for at least xml elements):
xpath(InputMessage, "string(//*[local-name()='IntField'])");
I find this useful when picking up key-values from the message, that can be available only once.
All the examples above are for elements. Since you are picking up value from an attribute, the actual structure
is
varFName = xpath(InputMessage,"string(/*[local-name()='StudentDetails']/*[local-name()='Student']/@*[local-name()='FName'])");
And to learn the rest of the possibilities of Xpath, like count, different types, more detailed selections
of the correct Node (Like example, I want only the one where FNAME = 'MyFName') You can try something like: http://social.technet.microsoft.com/wiki/contents/articles/6944.biztalk-orchestrations-xpath-survival-guide.aspx
Also get DanSharp XmlViewer. It will help you quite a bit when fine tuning the xpaths.

Modify DSN Messages without using Shell.

Similar Messages

Maybe you are looking for